enum packet_format pkt_fmt; /* format to use for packet send / receive */
int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */
int baud_rate; /* stores current baud rate in integer form */
- int cbr_mask; /* stores current baud rate in masked form */
int isthrottled; /* if throttled, discard reads */
wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */
char prev_status, diff_status; /* used for TIOCMIWAIT */
static void cypress_set_dead (struct usb_serial_port *port);
static void cypress_read_int_callback (struct urb *urb);
static void cypress_write_int_callback (struct urb *urb);
-/* baud helper functions */
-static int mask_to_rate (unsigned mask);
-static unsigned rate_to_mask (int rate);
/* write buffer functions */
static struct cypress_buf *cypress_buf_alloc(unsigned int size);
static void cypress_buf_free(struct cypress_buf *cb);
*****************************************************************************/
-static int analyze_baud_rate(struct usb_serial_port *port, unsigned baud_mask)
+static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
{
- int new_rate;
struct cypress_private *priv;
priv = usb_get_serial_port_data(port);
* The Cypress HID->COM device will work successfully up to
* 115200bps (but the actual throughput is around 3kBps).
*/
- new_rate = mask_to_rate(baud_mask);
- if (new_rate < 0) {
- dbg("%s - failed setting baud rate, untranslatable speed",
- __func__);
- return -1;
- }
if (port->serial->dev->speed == USB_SPEED_LOW) {
/*
* Mike Isely <isely@pobox.com> 2-Feb-2008: The
/* This function can either set or retrieve the current serial line settings */
-static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits,
+static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_rate, int data_bits, int stop_bits,
int parity_enable, int parity_type, int reset, int cypress_request_type)
{
int new_baudrate = 0, retval = 0, tries = 0;
switch(cypress_request_type) {
case CYPRESS_SET_CONFIG:
new_baudrate = priv->baud_rate;
- if (baud_mask != priv->cbr_mask) {
+ /* 0 means 'Hang up' so doesn't change the true bit rate */
+ if (baud_rate == 0)
+ new_baudrate = priv->baud_rate;
+ /* Change of speed ? */
+ else if (baud_rate != priv->baud_rate) {
dbg("%s - baud rate is changing", __FUNCTION__);
- retval = analyze_baud_rate(port, baud_mask);
+ retval = analyze_baud_rate(port, baud_rate);
if (retval >= 0) {
new_baudrate = retval;
dbg("%s - New baud rate set to %d",
} else {
spin_lock_irqsave(&priv->lock, flags);
priv->baud_rate = new_baudrate;
- priv->cbr_mask = baud_mask;
priv->current_config = feature_buffer[4];
spin_unlock_irqrestore(&priv->lock, flags);
+ /* If we asked for a speed change encode it */
+ if (baud_rate)
+ tty_encode_baud_rate(port->tty,
+ new_baudrate, new_baudrate);
}
break;
case CYPRESS_GET_CONFIG:
/* store the config in one byte, and later use bit masks to check values */
priv->current_config = feature_buffer[4];
priv->baud_rate = *((u_int32_t *)feature_buffer);
-
- if ( (priv->cbr_mask = rate_to_mask(priv->baud_rate)) == 0x40)
- dbg("%s - failed setting the baud mask (not defined)", __FUNCTION__);
spin_unlock_irqrestore(&priv->lock, flags);
}
}
}
-/* given a baud mask, it will return integer baud on success */
-static int mask_to_rate (unsigned mask)
-{
- int rate;
-
- switch (mask) {
- case B0: rate = 0; break;
- case B300: rate = 300; break;
- case B600: rate = 600; break;
- case B1200: rate = 1200; break;
- case B2400: rate = 2400; break;
- case B4800: rate = 4800; break;
- case B9600: rate = 9600; break;
- case B19200: rate = 19200; break;
- case B38400: rate = 38400; break;
- case B57600: rate = 57600; break;
- case B115200: rate = 115200; break;
- default: rate = -1;
- }
-
- return rate;
-}
-
-
-static unsigned rate_to_mask (int rate)
-{
- unsigned mask;
-
- switch (rate) {
- case 0: mask = B0; break;
- case 300: mask = B300; break;
- case 600: mask = B600; break;
- case 1200: mask = B1200; break;
- case 2400: mask = B2400; break;
- case 4800: mask = B4800; break;
- case 9600: mask = B9600; break;
- case 19200: mask = B19200; break;
- case 38400: mask = B38400; break;
- case 57600: mask = B57600; break;
- case 115200: mask = B115200; break;
- default: mask = 0x40;
- }
-
- return mask;
-}
/*****************************************************************************
* Cypress serial driver functions
*****************************************************************************/
priv->line_control = 0;
priv->termios_initialized = 0;
priv->rx_flags = 0;
- priv->cbr_mask = B300;
/* Default packet format setting is determined by packet size.
Anything with a size larger then 9 must have a separate
count field since the 3 bit count field is otherwise too
priv->line_control &= ~CONTROL_RTS;
if (clear & TIOCM_DTR)
priv->line_control &= ~CONTROL_DTR;
+ priv->cmd_ctrl = 1;
spin_unlock_irqrestore(&priv->lock, flags);
- priv->cmd_ctrl = 1;
return cypress_write(port, NULL, 0);
}
dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
switch (cmd) {
- case TIOCGSERIAL:
- if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct ktermios))) {
- return -EFAULT;
- }
- return (0);
- break;
- case TIOCSSERIAL:
- if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct ktermios))) {
- return -EFAULT;
- }
- /* here we need to call cypress_set_termios to invoke the new settings */
- cypress_set_termios(port, &priv->tmp_termios);
- return (0);
- break;
/* This code comes from drivers/char/serial.c and ftdi_sio.c */
case TIOCMIWAIT:
while (priv != NULL) {
struct cypress_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
int data_bits, stop_bits, parity_type, parity_enable;
- unsigned cflag, iflag, baud_mask;
+ unsigned cflag, iflag;
unsigned long flags;
__u8 oldlines;
int linechange = 0;
dbg("%s - port %d", __FUNCTION__, port->number);
tty = port->tty;
- if ((!tty) || (!tty->termios)) {
- dbg("%s - no tty structures", __FUNCTION__);
- return;
- }
spin_lock_irqsave(&priv->lock, flags);
if (!priv->termios_initialized) {
*(tty->termios) = tty_std_termios;
tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
CLOCAL;
+ tty->termios->c_ispeed = 4800;
+ tty->termios->c_ospeed = 4800;
} else if (priv->chiptype == CT_CYPHIDCOM) {
*(tty->termios) = tty_std_termios;
tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
CLOCAL;
+ tty->termios->c_ispeed = 9600;
+ tty->termios->c_ospeed = 9600;
} else if (priv->chiptype == CT_CA42V2) {
*(tty->termios) = tty_std_termios;
tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
CLOCAL;
+ tty->termios->c_ispeed = 9600;
+ tty->termios->c_ospeed = 9600;
}
priv->termios_initialized = 1;
}
spin_unlock_irqrestore(&priv->lock, flags);
+ /* Unsupported features need clearing */
+ tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS);
+
cflag = tty->termios->c_cflag;
iflag = tty->termios->c_iflag;
/* check if there are new settings */
if (old_termios) {
- if ((cflag != old_termios->c_cflag) ||
- (RELEVANT_IFLAG(iflag) !=
- RELEVANT_IFLAG(old_termios->c_iflag))) {
- dbg("%s - attempting to set new termios settings",
- __FUNCTION__);
- /* should make a copy of this in case something goes
- * wrong in the function, we can restore it */
- spin_lock_irqsave(&priv->lock, flags);
- priv->tmp_termios = *(tty->termios);
- spin_unlock_irqrestore(&priv->lock, flags);
- } else {
- dbg("%s - nothing to do, exiting", __FUNCTION__);
- return;
- }
- } else
- return;
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->tmp_termios = *(tty->termios);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
/* set number of data bits, parity, stop bits */
/* when parity is disabled the parity type bit is ignored */
if ((cflag & CBAUD) == B0) {
/* drop dtr and rts */
dbg("%s - dropping the lines, baud rate 0bps", __FUNCTION__);
- baud_mask = B0;
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
- } else {
- baud_mask = (cflag & CBAUD);
- switch(baud_mask) {
- case B300:
- dbg("%s - setting baud 300bps", __FUNCTION__);
- break;
- case B600:
- dbg("%s - setting baud 600bps", __FUNCTION__);
- break;
- case B1200:
- dbg("%s - setting baud 1200bps", __FUNCTION__);
- break;
- case B2400:
- dbg("%s - setting baud 2400bps", __FUNCTION__);
- break;
- case B4800:
- dbg("%s - setting baud 4800bps", __FUNCTION__);
- break;
- case B9600:
- dbg("%s - setting baud 9600bps", __FUNCTION__);
- break;
- case B19200:
- dbg("%s - setting baud 19200bps", __FUNCTION__);
- break;
- case B38400:
- dbg("%s - setting baud 38400bps", __FUNCTION__);
- break;
- case B57600:
- dbg("%s - setting baud 57600bps", __FUNCTION__);
- break;
- case B115200:
- dbg("%s - setting baud 115200bps", __FUNCTION__);
- break;
- default:
- dbg("%s - unknown masked baud rate", __FUNCTION__);
- }
+ } else
priv->line_control = (CONTROL_DTR | CONTROL_RTS);
- }
spin_unlock_irqrestore(&priv->lock, flags);
dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
"%d data_bits (+5)", __FUNCTION__, stop_bits,
parity_enable, parity_type, data_bits);
- cypress_serial_control(port, baud_mask, data_bits, stop_bits,
+ cypress_serial_control(port, tty_get_baud_rate(tty), data_bits, stop_bits,
parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
/* we perform a CYPRESS_GET_CONFIG so that the current settings are
projects / linux-2.6 / commitdiff