ide: Kconfig face-lift

* Convert config options for PCI host drivers to select BLK_DEV_IDEPCI.

* Same for BLK_DEV_IDEDMA_PCI and PCI DMA host drivers, also make this
  config option select BLK_DEV_IDEPCI.

* Remove no longer needed help for BLK_DEV_IDEPCI and BLK_DEV_IDEDMA_PCI.

* Remove redundant IDE_CHIPSETS config option.

As a result of this patch users have now three less config options
to worry about and can just select host drivers that they need
(IDE config menu is "flatter").

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 75b2737510a6e8ee36aebebe5bfe3dd79f958666..aa0e0c9f74c5a132c043b1c6efd82e9e19bf1a94 100644 (file)
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -359,17 +359,16 @@ config BLK_DEV_IDEPNP
          would like the kernel to automatically detect and activate
          it, say Y here.
 
+if PCI
+
+comment "PCI IDE chipsets support"
+
 config BLK_DEV_IDEPCI
-       bool "PCI IDE chipset support" if PCI
-       default BLK_DEV_IDEDMA_PMAC if PPC_PMAC && BLK_DEV_IDEDMA_PMAC
-       help
-         Say Y here for PCI systems which use IDE drive(s).
-         This option helps the IDE driver to automatically detect and
-         configure all PCI-based IDE interfaces in your system.
+       bool
 
 config IDEPCI_SHARE_IRQ
        bool "Sharing PCI IDE interrupts support"
-       depends on PCI && BLK_DEV_IDEPCI
+       depends on BLK_DEV_IDEPCI
        help
          Some ATA/IDE chipsets have hardware support which allows for
          sharing a single IRQ with other cards. To enable support for
@@ -379,11 +378,11 @@ config IDEPCI_SHARE_IRQ
          If unsure, say N.
 
 config IDEPCI_PCIBUS_ORDER
-       def_bool PCI && BLK_DEV_IDE=y && BLK_DEV_IDEPCI
+       def_bool BLK_DEV_IDE=y && BLK_DEV_IDEPCI
 
 config BLK_DEV_OFFBOARD
        bool "Boot off-board chipsets first support"
-       depends on PCI && BLK_DEV_IDEPCI
+       depends on BLK_DEV_IDEPCI
        help
          Normally, IDE controllers built into the motherboard (on-board
          controllers) are assigned to ide0 and ide1 while those on add-in PCI
@@ -406,21 +405,23 @@ config BLK_DEV_OFFBOARD
 
 config BLK_DEV_GENERIC
        tristate "Generic PCI IDE Chipset Support"
-       depends on BLK_DEV_IDEPCI
+       select BLK_DEV_IDEPCI
         help
           This option provides generic support for various PCI IDE Chipsets
           which otherwise might not be supported.
 
 config BLK_DEV_OPTI621
        tristate "OPTi 82C621 chipset enhanced support (EXPERIMENTAL)"
-       depends on PCI && BLK_DEV_IDEPCI && EXPERIMENTAL
+       depends on EXPERIMENTAL
+       select BLK_DEV_IDEPCI
        help
          This is a driver for the OPTi 82C621 EIDE controller.
          Please read the comments at the top of <file:drivers/ide/pci/opti621.c>.
 
 config BLK_DEV_RZ1000
        tristate "RZ1000 chipset bugfix/support"
-       depends on PCI && BLK_DEV_IDEPCI && X86
+       depends on X86
+       select BLK_DEV_IDEPCI
        help
          The PC-Technologies RZ1000 IDE chip is used on many common 486 and
          Pentium motherboards, usually along with the "Neptune" chipset.
@@ -431,35 +432,21 @@ config BLK_DEV_RZ1000
          things will operate 100% reliably.
 
 config BLK_DEV_IDEDMA_PCI
-       bool "Generic PCI bus-master DMA support"
-       depends on PCI && BLK_DEV_IDEPCI
-       ---help---
-         If your PCI system uses IDE drive(s) (as opposed to SCSI, say) and
-         is capable of bus-master DMA operation (most Pentium PCI systems),
-         you will want to say Y here to reduce CPU overhead. You can then use
-         the "hdparm" utility to enable DMA for drives for which it was not
-         enabled automatically. By default, DMA is not enabled automatically
-         for these drives, but you can change that by saying Y to the
-         following question "Use DMA by default when available". You can get
-         the latest version of the hdparm utility from
-         <ftp://ibiblio.org/pub/Linux/system/hardware/>.
-
-         Read the comments at the beginning of <file:drivers/ide/ide-dma.c>
-         and the file <file:Documentation/ide.txt> for more information.
-
-         It is safe to say Y to this question.
-
-if BLK_DEV_IDEDMA_PCI
+       bool
+       select BLK_DEV_IDEPCI
 
 config BLK_DEV_IDEDMA_FORCED
        bool "Force enable legacy 2.0.X HOSTS to use DMA"
+       depends on BLK_DEV_IDEDMA_PCI
        help
          This is an old piece of lost code from Linux 2.0 Kernels.
 
          Generally say N here.
 
+# TODO: remove it
 config IDEDMA_ONLYDISK
        bool "Enable DMA only for disks "
+       depends on BLK_DEV_IDEDMA_PCI
        help
          This is used if you know your ATAPI Devices are going to fail DMA
          Transfers.
@@ -468,6 +455,7 @@ config IDEDMA_ONLYDISK
 
 config BLK_DEV_AEC62XX
        tristate "AEC62XX chipset support"
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver adds explicit support for Acard AEC62xx (Artop ATP8xx)
          IDE controllers. This allows the kernel to change PIO, DMA and UDMA
@@ -475,6 +463,7 @@ config BLK_DEV_AEC62XX
 
 config BLK_DEV_ALI15X3
        tristate "ALI M15x3 chipset support"
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C
          onboard chipsets.  It also tests for Simplex mode and enables
@@ -503,6 +492,7 @@ config WDC_ALI15X3
 
 config BLK_DEV_AMD74XX
        tristate "AMD and nVidia IDE support"
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver adds explicit support for AMD-7xx and AMD-8111 chips
          and also for the nVidia nForce chip.  This allows the kernel to
@@ -512,6 +502,7 @@ config BLK_DEV_AMD74XX
 config BLK_DEV_ATIIXP
        tristate "ATI IXP chipset IDE support"
        depends on X86
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver adds explicit support for ATI IXP chipset.
          This allows the kernel to change PIO, DMA and UDMA speeds
@@ -521,18 +512,21 @@ config BLK_DEV_ATIIXP
 
 config BLK_DEV_CMD64X
        tristate "CMD64{3|6|8|9} chipset support"
+       select BLK_DEV_IDEDMA_PCI
        help
          Say Y here if you have an IDE controller which uses any of these
          chipsets: CMD643, CMD646, or CMD648.
 
 config BLK_DEV_TRIFLEX
        tristate "Compaq Triflex IDE support"
+       select BLK_DEV_IDEDMA_PCI
        help
          Say Y here if you have a Compaq Triflex IDE controller, such
          as those commonly found on Compaq Pentium-Pro systems
 
 config BLK_DEV_CY82C693
        tristate "CY82C693 chipset support"
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver adds detection and support for the CY82C693 chipset
          used on Digital's PC-Alpha 164SX boards.
@@ -543,6 +537,7 @@ config BLK_DEV_CY82C693
 config BLK_DEV_CS5520
        tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"
        depends on EXPERIMENTAL
+       select BLK_DEV_IDEDMA_PCI
        help
          Include support for PIO tuning and virtual DMA on the Cyrix MediaGX
          5510/5520 chipset. This will automatically be detected and
@@ -552,6 +547,7 @@ config BLK_DEV_CS5520
 
 config BLK_DEV_CS5530
        tristate "Cyrix/National Semiconductor CS5530 MediaGX chipset support"
+       select BLK_DEV_IDEDMA_PCI
        help
          Include support for UDMA on the Cyrix MediaGX 5530 chipset. This
          will automatically be detected and configured if found.
@@ -561,6 +557,7 @@ config BLK_DEV_CS5530
 config BLK_DEV_CS5535
        tristate "AMD CS5535 chipset support"
        depends on X86 && !X86_64
+       select BLK_DEV_IDEDMA_PCI
        help
          Include support for UDMA on the NSC/AMD CS5535 companion chipset.
          This will automatically be detected and configured if found.
@@ -569,6 +566,7 @@ config BLK_DEV_CS5535
 
 config BLK_DEV_HPT34X
        tristate "HPT34X chipset support"
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver adds up to 4 more EIDE devices sharing a single
          interrupt. The HPT343 chipset in its current form is a non-bootable
@@ -589,7 +587,8 @@ config HPT34X_AUTODMA
 
 config BLK_DEV_HPT366
        tristate "HPT36X/37X chipset support"
-       ---help---
+       select BLK_DEV_IDEDMA_PCI
+       help
          HPT366 is an Ultra DMA chipset for ATA-66.
          HPT368 is an Ultra DMA chipset for ATA-66 RAID Based.
          HPT370 is an Ultra DMA chipset for ATA-100.
@@ -613,18 +612,21 @@ config BLK_DEV_HPT366
 
 config BLK_DEV_JMICRON
        tristate "JMicron JMB36x support"
+       select BLK_DEV_IDEDMA_PCI
        help
          Basic support for the JMicron ATA controllers. For full support
          use the libata drivers.
 
 config BLK_DEV_SC1200
        tristate "National SCx200 chipset support"
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver adds support for the built in IDE on the National
          SCx200 series of embedded x86 "Geode" systems
 
 config BLK_DEV_PIIX
        tristate "Intel PIIXn chipsets support"
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver adds explicit support for Intel PIIX and ICH chips
          and also for the Efar Victory66 (slc90e66) chip.  This allows
@@ -633,17 +635,20 @@ config BLK_DEV_PIIX
 
 config BLK_DEV_IT8213
        tristate "IT8213 IDE support"
+       select BLK_DEV_IDEDMA_PCI
        help
         This driver adds support for the ITE 8213 IDE controller.
 
 config BLK_DEV_IT821X
        tristate "IT821X IDE support"
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver adds support for the ITE 8211 IDE controller and the
          IT 8212 IDE RAID controller in both RAID and pass-through mode.
 
 config BLK_DEV_NS87415
        tristate "NS87415 chipset support"
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver adds detection and support for the NS87415 chip
          (used mainly on SPARC64 and PA-RISC machines).
@@ -652,6 +657,7 @@ config BLK_DEV_NS87415
 
 config BLK_DEV_PDC202XX_OLD
        tristate "PROMISE PDC202{46|62|65|67} support"
+       select BLK_DEV_IDEDMA_PCI
        help
          Promise Ultra33 or PDC20246
          Promise Ultra66 or PDC20262
@@ -693,9 +699,11 @@ config PDC202XX_BURST
 
 config BLK_DEV_PDC202XX_NEW
        tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
+       select BLK_DEV_IDEDMA_PCI
 
 config BLK_DEV_SVWKS
        tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver adds PIO/(U)DMA support for the ServerWorks OSB4/CSB5
          chipsets.
@@ -704,6 +712,7 @@ config BLK_DEV_SGIIOC4
        tristate "Silicon Graphics IOC4 chipset ATA/ATAPI support"
        depends on (IA64_SGI_SN2 || IA64_GENERIC) && SGI_IOC4
        select IDEPCI_SHARE_IRQ
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4
          chipset, which has one channel and can support two devices.
@@ -711,6 +720,7 @@ config BLK_DEV_SGIIOC4
 
 config BLK_DEV_SIIMAGE
        tristate "Silicon Image chipset support"
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver adds PIO/(U)DMA support for the SI CMD680 and SII
          3112 (Serial ATA) chips.
@@ -718,7 +728,8 @@ config BLK_DEV_SIIMAGE
 config BLK_DEV_SIS5513
        tristate "SiS5513 chipset support"
        depends on X86
-       ---help---
+       select BLK_DEV_IDEDMA_PCI
+       help
          This driver ensures (U)DMA support for SIS5513 chipset family based
          mainboards.
 
@@ -737,6 +748,7 @@ config BLK_DEV_SIS5513
 config BLK_DEV_SL82C105
        tristate "Winbond SL82c105 support"
        depends on (PPC || ARM)
+       select BLK_DEV_IDEDMA_PCI
        help
          If you have a Winbond SL82c105 IDE controller, say Y here to enable
          special configuration for this chip. This is common on various CHRP
@@ -744,6 +756,7 @@ config BLK_DEV_SL82C105
 
 config BLK_DEV_SLC90E66
        tristate "SLC90E66 chipset support"
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver ensures (U)DMA support for Victory66 SouthBridges for
          SMsC with Intel NorthBridges.  This is an Ultra66 based chipset.
@@ -759,6 +772,7 @@ config BLK_DEV_SLC90E66
 
 config BLK_DEV_TRM290
        tristate "Tekram TRM290 chipset support"
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver adds support for bus master DMA transfers
          using the Tekram TRM290 PCI IDE chip. Volunteers are
@@ -767,6 +781,7 @@ config BLK_DEV_TRM290
 
 config BLK_DEV_VIA82CXXX
        tristate "VIA82CXXX chipset support"
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver adds explicit support for VIA BusMastering IDE chips.
          This allows the kernel to change PIO, DMA and UDMA speeds and to
@@ -774,12 +789,14 @@ config BLK_DEV_VIA82CXXX
 
 config BLK_DEV_TC86C001
        tristate "Toshiba TC86C001 support"
+       select BLK_DEV_IDEDMA_PCI
        help
        This driver adds support for Toshiba TC86C001 GOKU-S chip.
 
 config BLK_DEV_CELLEB
        tristate "Toshiba's Cell Reference Set IDE support"
        depends on PPC_CELLEB
+       select BLK_DEV_IDEDMA_PCI
        help
          This driver provides support for the built-in IDE controller on
          Toshiba Cell Reference Board.
@@ -993,24 +1010,9 @@ config IDE_EXT_DIRECT
 endchoice
 
 # no isa -> no vlb
-config IDE_CHIPSETS
-       bool "Other IDE chipset support"
-       depends on ISA
-       ---help---
-         Say Y here if you want to include enhanced support for various IDE
-         interface chipsets used on motherboards and add-on cards. You can
-         then pick your particular IDE chip from among the following options.
-         This enhanced support may be necessary for Linux to be able to
-         access the 3rd/4th drives in some systems. It may also enable
-         setting of higher speed I/O rates to improve system performance with
-         these chipsets. Most of these also require special kernel boot
-         parameters to actually turn on the support at runtime; you can find
-         a list of these in the file <file:Documentation/ide.txt>.
-
-         People with SCSI-only systems can say N here.
-
-if IDE_CHIPSETS
+if ISA
 
+comment "Other IDE chipsets support"
 comment "Note: most of these also require special kernel boot parameters"
 
 config BLK_DEV_4DRIVES