]> err.no Git - linux-2.6/commitdiff
Blackfin arch: move the init sections to the end of memory to help decrease memory...
authorRobin Getz <robin.getz@analog.com>
Thu, 15 Nov 2007 12:57:53 +0000 (20:57 +0800)
committerBryan Wu <bryan.wu@analog.com>
Thu, 15 Nov 2007 12:57:53 +0000 (20:57 +0800)
move the init sections to the end of memory, so that after they
are free, run time memory is all continugous - this should help decrease
memory fragementation. When doing this, we also pack some of the other
sections a little closer together, to make sure we don't waste memory.
To make this happen, we need to rename the .data.init_task section to
.init_task.data, so it doesn't get picked up by the linker script glob.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
arch/blackfin/kernel/init_task.c
arch/blackfin/kernel/setup.c
arch/blackfin/kernel/vmlinux.lds.S

index 673c860ffc239f4a5655eb22940839d16f73c255..c640154030e270d358c5f748f11222038cbbf286 100644 (file)
@@ -57,5 +57,5 @@ EXPORT_SYMBOL(init_task);
  * "init_task" linker map entry.
  */
 union thread_union init_thread_union
-    __attribute__ ((__section__(".data.init_task"))) = {
+    __attribute__ ((__section__(".init_task.data"))) = {
 INIT_THREAD_INFO(init_task)};
index 934234f438390d8ddfb11c664528bfe984cc297d..dfe06b09a9d4ea8cd215900fb43c42d89199f7c3 100644 (file)
@@ -236,7 +236,7 @@ void __init setup_arch(char **cmdline_p)
        /* by now the stack is part of the init task */
        memory_end = _ramend - DMA_UNCACHED_REGION;
 
-       _ramstart = (unsigned long)__bss_stop;
+       _ramstart = (unsigned long)_end;
        memory_start = PAGE_ALIGN(_ramstart);
 
 #if defined(CONFIG_MTD_UCLINUX)
@@ -285,7 +285,7 @@ void __init setup_arch(char **cmdline_p)
        }
 
        /* Relocate MTD image to the top of memory after the uncached memory area */
-       dma_memcpy((char *)memory_end, __bss_stop, mtd_size);
+       dma_memcpy((char *)memory_end, _end, mtd_size);
 
        memory_mtd_start = memory_end;
        _ebss = memory_mtd_start;       /* define _ebss for compatible */
@@ -357,10 +357,10 @@ void __init setup_arch(char **cmdline_p)
        printk(KERN_INFO "Memory map:\n"
               KERN_INFO "  text      = 0x%p-0x%p\n"
               KERN_INFO "  rodata    = 0x%p-0x%p\n"
+              KERN_INFO "  bss       = 0x%p-0x%p\n"
               KERN_INFO "  data      = 0x%p-0x%p\n"
               KERN_INFO "    stack   = 0x%p-0x%p\n"
               KERN_INFO "  init      = 0x%p-0x%p\n"
-              KERN_INFO "  bss       = 0x%p-0x%p\n"
               KERN_INFO "  available = 0x%p-0x%p\n"
 #ifdef CONFIG_MTD_UCLINUX
               KERN_INFO "  rootfs    = 0x%p-0x%p\n"
@@ -370,10 +370,10 @@ void __init setup_arch(char **cmdline_p)
 #endif
               , _stext, _etext,
               __start_rodata, __end_rodata,
+              __bss_start, __bss_stop,
               _sdata, _edata,
               (void *)&init_thread_union, (void *)((int)(&init_thread_union) + 0x2000),
               __init_begin, __init_end,
-              __bss_start, __bss_stop,
               (void *)_ramstart, (void *)memory_end
 #ifdef CONFIG_MTD_UCLINUX
               , (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size)
index 9b75bc83c71fac9847cd8e0f578183dbfb87115c..5bdc0f79bb1aab910d156836680ea13acfda00bd 100644 (file)
@@ -41,6 +41,9 @@ _jiffies = _jiffies_64;
 SECTIONS
 {
        . = CONFIG_BOOT_LOAD;
+       /* Neither the text, ro_data or bss section need to be aligned
+        * So pack them back to back
+        */
        .text :
        {
                __text = .;
@@ -58,22 +61,25 @@ SECTIONS
                *(__ex_table)
                ___stop___ex_table = .;
 
-               . = ALIGN(4);
                __etext = .;
        }
 
-       RO_DATA(PAGE_SIZE)
+       /* Just in case the first read only is a 32-bit access */
+       RO_DATA(4)
+
+       .bss :
+       {
+               . = ALIGN(4);
+               ___bss_start = .;
+               *(.bss .bss.*)
+               *(COMMON)
+               ___bss_stop = .;
+       }
 
        .data :
        {
-               /* make sure the init_task is aligned to the
-                * kernel thread size so we can locate the kernel
-                * stack properly and quickly.
-                */
                __sdata = .;
-               . = ALIGN(THREAD_SIZE);
-               *(.data.init_task)
-
+               /* This gets done first, so the glob doesn't suck it in */
                . = ALIGN(32);
                *(.data.cacheline_aligned)
 
@@ -81,10 +87,22 @@ SECTIONS
                *(.data.*)
                CONSTRUCTORS
 
+               /* make sure the init_task is aligned to the
+                * kernel thread size so we can locate the kernel
+                * stack properly and quickly.
+                */
                . = ALIGN(THREAD_SIZE);
+               *(.init_task.data)
+
                __edata = .;
        }
 
+       /* The init section should be last, so when we free it, it goes into
+        * the general memory pool, and (hopefully) will decrease fragmentation
+        * a tiny bit. The init section has a _requirement_ that it be
+        * PAGE_SIZE aligned
+        */
+       . = ALIGN(PAGE_SIZE);
        ___init_begin = .;
 
        .init.text :
@@ -179,16 +197,7 @@ SECTIONS
        . = ALIGN(PAGE_SIZE);
        ___init_end = .;
 
-       .bss :
-       {
-               . = ALIGN(4);
-               ___bss_start = .;
-               *(.bss .bss.*)
-               *(COMMON)
-               . = ALIGN(4);
-               ___bss_stop = .;
-               __end = .;
-       }
+       __end =.;
 
        STABS_DEBUG