#include <linux/delay.h>
#include <linux/mutex.h>
#include <asm/io.h>
-#include <asm/msr.h>
#include <linux/scx200.h>
u8 *ptr;
char needs_reset;
unsigned len;
+
+ /* PCI device info */
+ struct pci_dev *pdev;
+ int bar;
};
/* Register Definitions */
return 0;
}
-static int __init scx200_acb_create(const char *text, int base, int index)
+static __init struct scx200_acb_iface *scx200_create_iface(const char *text,
+ int index)
{
struct scx200_acb_iface *iface;
struct i2c_adapter *adapter;
- int rc;
iface = kzalloc(sizeof(*iface), GFP_KERNEL);
if (!iface) {
printk(KERN_ERR NAME ": can't allocate memory\n");
- rc = -ENOMEM;
- goto errout;
+ return NULL;
}
adapter = &iface->adapter;
mutex_init(&iface->mutex);
- if (!request_region(base, 8, adapter->name)) {
- printk(KERN_ERR NAME ": can't allocate io 0x%x-0x%x\n",
- base, base + 8-1);
- rc = -EBUSY;
- goto errout_free;
- }
- iface->base = base;
+ return iface;
+}
+
+static int __init scx200_acb_create(struct scx200_acb_iface *iface)
+{
+ struct i2c_adapter *adapter;
+ int rc;
+
+ adapter = &iface->adapter;
rc = scx200_acb_probe(iface);
if (rc) {
printk(KERN_WARNING NAME ": probe failed\n");
- goto errout_release;
+ return rc;
}
scx200_acb_reset(iface);
if (i2c_add_adapter(adapter) < 0) {
printk(KERN_ERR NAME ": failed to register\n");
- rc = -ENODEV;
- goto errout_release;
+ return -ENODEV;
}
down(&scx200_acb_list_mutex);
up(&scx200_acb_list_mutex);
return 0;
+}
- errout_release:
- release_region(iface->base, 8);
+static __init int scx200_create_pci(const char *text, struct pci_dev *pdev,
+ int bar)
+{
+ struct scx200_acb_iface *iface;
+ int rc;
+
+ iface = scx200_create_iface(text, 0);
+
+ if (iface == NULL)
+ return -ENOMEM;
+
+ iface->pdev = pdev;
+ iface->bar = bar;
+
+ pci_enable_device_bars(iface->pdev, 1 << iface->bar);
+
+ rc = pci_request_region(iface->pdev, iface->bar, iface->adapter.name);
+
+ if (rc != 0) {
+ printk(KERN_ERR NAME ": can't allocate PCI BAR %d\n",
+ iface->bar);
+ goto errout_free;
+ }
+
+ iface->base = pci_resource_start(iface->pdev, iface->bar);
+ rc = scx200_acb_create(iface);
+
+ if (rc == 0)
+ return 0;
+
+ pci_release_region(iface->pdev, iface->bar);
+ pci_dev_put(iface->pdev);
errout_free:
kfree(iface);
- errout:
return rc;
}
-static struct pci_device_id scx200[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) },
- { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) },
- { },
-};
+static int __init scx200_create_isa(const char *text, unsigned long base,
+ int index)
+{
+ struct scx200_acb_iface *iface;
+ int rc;
+
+ iface = scx200_create_iface(text, index);
+
+ if (iface == NULL)
+ return -ENOMEM;
+
+ if (request_region(base, 8, iface->adapter.name) == 0) {
+ printk(KERN_ERR NAME ": can't allocate io 0x%lx-0x%lx\n",
+ base, base + 8 - 1);
+ rc = -EBUSY;
+ goto errout_free;
+ }
+
+ iface->base = base;
+ rc = scx200_acb_create(iface);
+
+ if (rc == 0)
+ return 0;
-static struct pci_device_id divil_pci[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) },
- { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
- { } /* NULL entry */
+ release_region(base, 8);
+ errout_free:
+ kfree(iface);
+ return rc;
+}
+
+/* Driver data is an index into the scx200_data array that indicates
+ * the name and the BAR where the I/O address resource is located. ISA
+ * devices are flagged with a bar value of -1 */
+
+static struct pci_device_id scx200_pci[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE),
+ .driver_data = 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE),
+ .driver_data = 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA),
+ .driver_data = 1 },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA),
+ .driver_data = 2 }
};
-#define MSR_LBAR_SMB 0x5140000B
+static struct {
+ const char *name;
+ int bar;
+} scx200_data[] = {
+ { "SCx200", -1 },
+ { "CS5535", 0 },
+ { "CS5536", 0 }
+};
-static __init int scx200_add_cs553x(void)
+static __init int scx200_scan_pci(void)
{
- u32 low, hi;
- u32 smb_base;
-
- /* Grab & reserve the SMB I/O range */
- rdmsr(MSR_LBAR_SMB, low, hi);
+ int data, dev;
+ int rc = -ENODEV;
+ struct pci_dev *pdev;
+
+ for(dev = 0; dev < ARRAY_SIZE(scx200_pci); dev++) {
+ pdev = pci_get_device(scx200_pci[dev].vendor,
+ scx200_pci[dev].device, NULL);
+
+ if (pdev == NULL)
+ continue;
+
+ data = scx200_pci[dev].driver_data;
+
+ /* if .bar is greater or equal to zero, this is a
+ * PCI device - otherwise, we assume
+ that the ports are ISA based
+ */
+
+ if (scx200_data[data].bar >= 0)
+ rc = scx200_create_pci(scx200_data[data].name, pdev,
+ scx200_data[data].bar);
+ else {
+ int i;
+
+ for (i = 0; i < MAX_DEVICES; ++i) {
+ if (base[i] == 0)
+ continue;
+
+ rc = scx200_create_isa(scx200_data[data].name,
+ base[i],
+ i);
+ }
+ }
- /* Check the IO mask and whether SMB is enabled */
- if (hi != 0x0000F001) {
- printk(KERN_WARNING NAME ": SMBus not enabled\n");
- return -ENODEV;
+ break;
}
- /* SMBus IO size is 8 bytes */
- smb_base = low & 0x0000FFF8;
-
- return scx200_acb_create("CS5535", smb_base, 0);
+ return rc;
}
static int __init scx200_acb_init(void)
{
- int i;
- int rc = -ENODEV;
+ int rc;
pr_debug(NAME ": NatSemi SCx200 ACCESS.bus Driver\n");
- /* Verify that this really is a SCx200 processor */
- if (pci_dev_present(scx200)) {
- for (i = 0; i < MAX_DEVICES; ++i) {
- if (base[i] > 0)
- rc = scx200_acb_create("SCx200", base[i], i);
- }
- } else if (pci_dev_present(divil_pci))
- rc = scx200_add_cs553x();
+ rc = scx200_scan_pci();
/* If at least one bus was created, init must succeed */
if (scx200_acb_list)
up(&scx200_acb_list_mutex);
i2c_del_adapter(&iface->adapter);
- release_region(iface->base, 8);
+
+ if (iface->pdev) {
+ pci_release_region(iface->pdev, iface->bar);
+ pci_dev_put(iface->pdev);
+ }
+ else
+ release_region(iface->base, 8);
+
kfree(iface);
down(&scx200_acb_list_mutex);
}
projects / linux-2.6 / commitdiff