{PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939), .driver_data = TC35815_TX4939 },
{0,}
};
-MODULE_DEVICE_TABLE (pci, tc35815_pci_tbl);
+MODULE_DEVICE_TABLE(pci, tc35815_pci_tbl);
/* see MODULE_PARM_DESC */
static struct tc35815_options {
* Bit assignments
*/
/* DMA_Ctl bit asign ------------------------------------------------------- */
-#define DMA_RxAlign 0x00c00000 /* 1:Reception Alignment */
-#define DMA_RxAlign_1 0x00400000
-#define DMA_RxAlign_2 0x00800000
-#define DMA_RxAlign_3 0x00c00000
-#define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */
-#define DMA_IntMask 0x00040000 /* 1:Interupt mask */
-#define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */
-#define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */
-#define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */
-#define DMA_TxBigE 0x00004000 /* 1:Transmit Big Endian */
-#define DMA_TestMode 0x00002000 /* 1:Test Mode */
-#define DMA_PowrMgmnt 0x00001000 /* 1:Power Management */
-#define DMA_DmBurst_Mask 0x000001fc /* DMA Burst size */
+#define DMA_RxAlign 0x00c00000 /* 1:Reception Alignment */
+#define DMA_RxAlign_1 0x00400000
+#define DMA_RxAlign_2 0x00800000
+#define DMA_RxAlign_3 0x00c00000
+#define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */
+#define DMA_IntMask 0x00040000 /* 1:Interupt mask */
+#define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */
+#define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */
+#define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */
+#define DMA_TxBigE 0x00004000 /* 1:Transmit Big Endian */
+#define DMA_TestMode 0x00002000 /* 1:Test Mode */
+#define DMA_PowrMgmnt 0x00001000 /* 1:Power Management */
+#define DMA_DmBurst_Mask 0x000001fc /* DMA Burst size */
/* RxFragSize bit asign ---------------------------------------------------- */
-#define RxFrag_EnPack 0x00008000 /* 1:Enable Packing */
-#define RxFrag_MinFragMask 0x00000ffc /* Minimum Fragment */
+#define RxFrag_EnPack 0x00008000 /* 1:Enable Packing */
+#define RxFrag_MinFragMask 0x00000ffc /* Minimum Fragment */
/* MAC_Ctl bit asign ------------------------------------------------------- */
-#define MAC_Link10 0x00008000 /* 1:Link Status 10Mbits */
-#define MAC_EnMissRoll 0x00002000 /* 1:Enable Missed Roll */
-#define MAC_MissRoll 0x00000400 /* 1:Missed Roll */
-#define MAC_Loop10 0x00000080 /* 1:Loop 10 Mbps */
-#define MAC_Conn_Auto 0x00000000 /*00:Connection mode (Automatic) */
-#define MAC_Conn_10M 0x00000020 /*01: (10Mbps endec)*/
-#define MAC_Conn_Mll 0x00000040 /*10: (Mll clock) */
-#define MAC_MacLoop 0x00000010 /* 1:MAC Loopback */
-#define MAC_FullDup 0x00000008 /* 1:Full Duplex 0:Half Duplex */
-#define MAC_Reset 0x00000004 /* 1:Software Reset */
-#define MAC_HaltImm 0x00000002 /* 1:Halt Immediate */
-#define MAC_HaltReq 0x00000001 /* 1:Halt request */
+#define MAC_Link10 0x00008000 /* 1:Link Status 10Mbits */
+#define MAC_EnMissRoll 0x00002000 /* 1:Enable Missed Roll */
+#define MAC_MissRoll 0x00000400 /* 1:Missed Roll */
+#define MAC_Loop10 0x00000080 /* 1:Loop 10 Mbps */
+#define MAC_Conn_Auto 0x00000000 /*00:Connection mode (Automatic) */
+#define MAC_Conn_10M 0x00000020 /*01: (10Mbps endec)*/
+#define MAC_Conn_Mll 0x00000040 /*10: (Mll clock) */
+#define MAC_MacLoop 0x00000010 /* 1:MAC Loopback */
+#define MAC_FullDup 0x00000008 /* 1:Full Duplex 0:Half Duplex */
+#define MAC_Reset 0x00000004 /* 1:Software Reset */
+#define MAC_HaltImm 0x00000002 /* 1:Halt Immediate */
+#define MAC_HaltReq 0x00000001 /* 1:Halt request */
/* PROM_Ctl bit asign ------------------------------------------------------ */
-#define PROM_Busy 0x00008000 /* 1:Busy (Start Operation) */
-#define PROM_Read 0x00004000 /*10:Read operation */
-#define PROM_Write 0x00002000 /*01:Write operation */
-#define PROM_Erase 0x00006000 /*11:Erase operation */
- /*00:Enable or Disable Writting, */
- /* as specified in PROM_Addr. */
-#define PROM_Addr_Ena 0x00000030 /*11xxxx:PROM Write enable */
- /*00xxxx: disable */
+#define PROM_Busy 0x00008000 /* 1:Busy (Start Operation) */
+#define PROM_Read 0x00004000 /*10:Read operation */
+#define PROM_Write 0x00002000 /*01:Write operation */
+#define PROM_Erase 0x00006000 /*11:Erase operation */
+ /*00:Enable or Disable Writting, */
+ /* as specified in PROM_Addr. */
+#define PROM_Addr_Ena 0x00000030 /*11xxxx:PROM Write enable */
+ /*00xxxx: disable */
/* CAM_Ctl bit asign ------------------------------------------------------- */
-#define CAM_CompEn 0x00000010 /* 1:CAM Compare Enable */
-#define CAM_NegCAM 0x00000008 /* 1:Reject packets CAM recognizes,*/
- /* accept other */
-#define CAM_BroadAcc 0x00000004 /* 1:Broadcast assept */
-#define CAM_GroupAcc 0x00000002 /* 1:Multicast assept */
-#define CAM_StationAcc 0x00000001 /* 1:unicast accept */
+#define CAM_CompEn 0x00000010 /* 1:CAM Compare Enable */
+#define CAM_NegCAM 0x00000008 /* 1:Reject packets CAM recognizes,*/
+ /* accept other */
+#define CAM_BroadAcc 0x00000004 /* 1:Broadcast assept */
+#define CAM_GroupAcc 0x00000002 /* 1:Multicast assept */
+#define CAM_StationAcc 0x00000001 /* 1:unicast accept */
/* CAM_Ena bit asign ------------------------------------------------------- */
-#define CAM_ENTRY_MAX 21 /* CAM Data entry max count */
+#define CAM_ENTRY_MAX 21 /* CAM Data entry max count */
#define CAM_Ena_Mask ((1<<CAM_ENTRY_MAX)-1) /* CAM Enable bits (Max 21bits) */
-#define CAM_Ena_Bit(index) (1<<(index))
+#define CAM_Ena_Bit(index) (1 << (index))
#define CAM_ENTRY_DESTINATION 0
#define CAM_ENTRY_SOURCE 1
#define CAM_ENTRY_MACCTL 20
/* Tx_Ctl bit asign -------------------------------------------------------- */
-#define Tx_En 0x00000001 /* 1:Transmit enable */
-#define Tx_TxHalt 0x00000002 /* 1:Transmit Halt Request */
-#define Tx_NoPad 0x00000004 /* 1:Suppress Padding */
-#define Tx_NoCRC 0x00000008 /* 1:Suppress Padding */
-#define Tx_FBack 0x00000010 /* 1:Fast Back-off */
-#define Tx_EnUnder 0x00000100 /* 1:Enable Underrun */
-#define Tx_EnExDefer 0x00000200 /* 1:Enable Excessive Deferral */
-#define Tx_EnLCarr 0x00000400 /* 1:Enable Lost Carrier */
-#define Tx_EnExColl 0x00000800 /* 1:Enable Excessive Collision */
-#define Tx_EnLateColl 0x00001000 /* 1:Enable Late Collision */
-#define Tx_EnTxPar 0x00002000 /* 1:Enable Transmit Parity */
-#define Tx_EnComp 0x00004000 /* 1:Enable Completion */
+#define Tx_En 0x00000001 /* 1:Transmit enable */
+#define Tx_TxHalt 0x00000002 /* 1:Transmit Halt Request */
+#define Tx_NoPad 0x00000004 /* 1:Suppress Padding */
+#define Tx_NoCRC 0x00000008 /* 1:Suppress Padding */
+#define Tx_FBack 0x00000010 /* 1:Fast Back-off */
+#define Tx_EnUnder 0x00000100 /* 1:Enable Underrun */
+#define Tx_EnExDefer 0x00000200 /* 1:Enable Excessive Deferral */
+#define Tx_EnLCarr 0x00000400 /* 1:Enable Lost Carrier */
+#define Tx_EnExColl 0x00000800 /* 1:Enable Excessive Collision */
+#define Tx_EnLateColl 0x00001000 /* 1:Enable Late Collision */
+#define Tx_EnTxPar 0x00002000 /* 1:Enable Transmit Parity */
+#define Tx_EnComp 0x00004000 /* 1:Enable Completion */
/* Tx_Stat bit asign ------------------------------------------------------- */
-#define Tx_TxColl_MASK 0x0000000F /* Tx Collision Count */
-#define Tx_ExColl 0x00000010 /* Excessive Collision */
-#define Tx_TXDefer 0x00000020 /* Transmit Defered */
-#define Tx_Paused 0x00000040 /* Transmit Paused */
-#define Tx_IntTx 0x00000080 /* Interrupt on Tx */
-#define Tx_Under 0x00000100 /* Underrun */
-#define Tx_Defer 0x00000200 /* Deferral */
-#define Tx_NCarr 0x00000400 /* No Carrier */
-#define Tx_10Stat 0x00000800 /* 10Mbps Status */
-#define Tx_LateColl 0x00001000 /* Late Collision */
-#define Tx_TxPar 0x00002000 /* Tx Parity Error */
-#define Tx_Comp 0x00004000 /* Completion */
-#define Tx_Halted 0x00008000 /* Tx Halted */
-#define Tx_SQErr 0x00010000 /* Signal Quality Error(SQE) */
+#define Tx_TxColl_MASK 0x0000000F /* Tx Collision Count */
+#define Tx_ExColl 0x00000010 /* Excessive Collision */
+#define Tx_TXDefer 0x00000020 /* Transmit Defered */
+#define Tx_Paused 0x00000040 /* Transmit Paused */
+#define Tx_IntTx 0x00000080 /* Interrupt on Tx */
+#define Tx_Under 0x00000100 /* Underrun */
+#define Tx_Defer 0x00000200 /* Deferral */
+#define Tx_NCarr 0x00000400 /* No Carrier */
+#define Tx_10Stat 0x00000800 /* 10Mbps Status */
+#define Tx_LateColl 0x00001000 /* Late Collision */
+#define Tx_TxPar 0x00002000 /* Tx Parity Error */
+#define Tx_Comp 0x00004000 /* Completion */
+#define Tx_Halted 0x00008000 /* Tx Halted */
+#define Tx_SQErr 0x00010000 /* Signal Quality Error(SQE) */
/* Rx_Ctl bit asign -------------------------------------------------------- */
-#define Rx_EnGood 0x00004000 /* 1:Enable Good */
-#define Rx_EnRxPar 0x00002000 /* 1:Enable Receive Parity */
-#define Rx_EnLongErr 0x00000800 /* 1:Enable Long Error */
-#define Rx_EnOver 0x00000400 /* 1:Enable OverFlow */
-#define Rx_EnCRCErr 0x00000200 /* 1:Enable CRC Error */
-#define Rx_EnAlign 0x00000100 /* 1:Enable Alignment */
-#define Rx_IgnoreCRC 0x00000040 /* 1:Ignore CRC Value */
-#define Rx_StripCRC 0x00000010 /* 1:Strip CRC Value */
-#define Rx_ShortEn 0x00000008 /* 1:Short Enable */
-#define Rx_LongEn 0x00000004 /* 1:Long Enable */
-#define Rx_RxHalt 0x00000002 /* 1:Receive Halt Request */
-#define Rx_RxEn 0x00000001 /* 1:Receive Intrrupt Enable */
+#define Rx_EnGood 0x00004000 /* 1:Enable Good */
+#define Rx_EnRxPar 0x00002000 /* 1:Enable Receive Parity */
+#define Rx_EnLongErr 0x00000800 /* 1:Enable Long Error */
+#define Rx_EnOver 0x00000400 /* 1:Enable OverFlow */
+#define Rx_EnCRCErr 0x00000200 /* 1:Enable CRC Error */
+#define Rx_EnAlign 0x00000100 /* 1:Enable Alignment */
+#define Rx_IgnoreCRC 0x00000040 /* 1:Ignore CRC Value */
+#define Rx_StripCRC 0x00000010 /* 1:Strip CRC Value */
+#define Rx_ShortEn 0x00000008 /* 1:Short Enable */
+#define Rx_LongEn 0x00000004 /* 1:Long Enable */
+#define Rx_RxHalt 0x00000002 /* 1:Receive Halt Request */
+#define Rx_RxEn 0x00000001 /* 1:Receive Intrrupt Enable */
/* Rx_Stat bit asign ------------------------------------------------------- */
-#define Rx_Halted 0x00008000 /* Rx Halted */
-#define Rx_Good 0x00004000 /* Rx Good */
-#define Rx_RxPar 0x00002000 /* Rx Parity Error */
- /* 0x00001000 not use */
-#define Rx_LongErr 0x00000800 /* Rx Long Error */
-#define Rx_Over 0x00000400 /* Rx Overflow */
-#define Rx_CRCErr 0x00000200 /* Rx CRC Error */
-#define Rx_Align 0x00000100 /* Rx Alignment Error */
-#define Rx_10Stat 0x00000080 /* Rx 10Mbps Status */
-#define Rx_IntRx 0x00000040 /* Rx Interrupt */
-#define Rx_CtlRecd 0x00000020 /* Rx Control Receive */
-
-#define Rx_Stat_Mask 0x0000EFC0 /* Rx All Status Mask */
+#define Rx_Halted 0x00008000 /* Rx Halted */
+#define Rx_Good 0x00004000 /* Rx Good */
+#define Rx_RxPar 0x00002000 /* Rx Parity Error */
+ /* 0x00001000 not use */
+#define Rx_LongErr 0x00000800 /* Rx Long Error */
+#define Rx_Over 0x00000400 /* Rx Overflow */
+#define Rx_CRCErr 0x00000200 /* Rx CRC Error */
+#define Rx_Align 0x00000100 /* Rx Alignment Error */
+#define Rx_10Stat 0x00000080 /* Rx 10Mbps Status */
+#define Rx_IntRx 0x00000040 /* Rx Interrupt */
+#define Rx_CtlRecd 0x00000020 /* Rx Control Receive */
+
+#define Rx_Stat_Mask 0x0000EFC0 /* Rx All Status Mask */
/* Int_En bit asign -------------------------------------------------------- */
-#define Int_NRAbtEn 0x00000800 /* 1:Non-recoverable Abort Enable */
-#define Int_TxCtlCmpEn 0x00000400 /* 1:Transmit Control Complete Enable */
-#define Int_DmParErrEn 0x00000200 /* 1:DMA Parity Error Enable */
-#define Int_DParDEn 0x00000100 /* 1:Data Parity Error Enable */
-#define Int_EarNotEn 0x00000080 /* 1:Early Notify Enable */
-#define Int_DParErrEn 0x00000040 /* 1:Detected Parity Error Enable */
-#define Int_SSysErrEn 0x00000020 /* 1:Signalled System Error Enable */
-#define Int_RMasAbtEn 0x00000010 /* 1:Received Master Abort Enable */
-#define Int_RTargAbtEn 0x00000008 /* 1:Received Target Abort Enable */
-#define Int_STargAbtEn 0x00000004 /* 1:Signalled Target Abort Enable */
-#define Int_BLExEn 0x00000002 /* 1:Buffer List Exhausted Enable */
-#define Int_FDAExEn 0x00000001 /* 1:Free Descriptor Area */
- /* Exhausted Enable */
+#define Int_NRAbtEn 0x00000800 /* 1:Non-recoverable Abort Enable */
+#define Int_TxCtlCmpEn 0x00000400 /* 1:Transmit Ctl Complete Enable */
+#define Int_DmParErrEn 0x00000200 /* 1:DMA Parity Error Enable */
+#define Int_DParDEn 0x00000100 /* 1:Data Parity Error Enable */
+#define Int_EarNotEn 0x00000080 /* 1:Early Notify Enable */
+#define Int_DParErrEn 0x00000040 /* 1:Detected Parity Error Enable */
+#define Int_SSysErrEn 0x00000020 /* 1:Signalled System Error Enable */
+#define Int_RMasAbtEn 0x00000010 /* 1:Received Master Abort Enable */
+#define Int_RTargAbtEn 0x00000008 /* 1:Received Target Abort Enable */
+#define Int_STargAbtEn 0x00000004 /* 1:Signalled Target Abort Enable */
+#define Int_BLExEn 0x00000002 /* 1:Buffer List Exhausted Enable */
+#define Int_FDAExEn 0x00000001 /* 1:Free Descriptor Area */
+ /* Exhausted Enable */
/* Int_Src bit asign ------------------------------------------------------- */
-#define Int_NRabt 0x00004000 /* 1:Non Recoverable error */
-#define Int_DmParErrStat 0x00002000 /* 1:DMA Parity Error & Clear */
-#define Int_BLEx 0x00001000 /* 1:Buffer List Empty & Clear */
-#define Int_FDAEx 0x00000800 /* 1:FDA Empty & Clear */
-#define Int_IntNRAbt 0x00000400 /* 1:Non Recoverable Abort */
-#define Int_IntCmp 0x00000200 /* 1:MAC control packet complete */
-#define Int_IntExBD 0x00000100 /* 1:Interrupt Extra BD & Clear */
-#define Int_DmParErr 0x00000080 /* 1:DMA Parity Error & Clear */
-#define Int_IntEarNot 0x00000040 /* 1:Receive Data write & Clear */
-#define Int_SWInt 0x00000020 /* 1:Software request & Clear */
-#define Int_IntBLEx 0x00000010 /* 1:Buffer List Empty & Clear */
-#define Int_IntFDAEx 0x00000008 /* 1:FDA Empty & Clear */
-#define Int_IntPCI 0x00000004 /* 1:PCI controller & Clear */
-#define Int_IntMacRx 0x00000002 /* 1:Rx controller & Clear */
-#define Int_IntMacTx 0x00000001 /* 1:Tx controller & Clear */
+#define Int_NRabt 0x00004000 /* 1:Non Recoverable error */
+#define Int_DmParErrStat 0x00002000 /* 1:DMA Parity Error & Clear */
+#define Int_BLEx 0x00001000 /* 1:Buffer List Empty & Clear */
+#define Int_FDAEx 0x00000800 /* 1:FDA Empty & Clear */
+#define Int_IntNRAbt 0x00000400 /* 1:Non Recoverable Abort */
+#define Int_IntCmp 0x00000200 /* 1:MAC control packet complete */
+#define Int_IntExBD 0x00000100 /* 1:Interrupt Extra BD & Clear */
+#define Int_DmParErr 0x00000080 /* 1:DMA Parity Error & Clear */
+#define Int_IntEarNot 0x00000040 /* 1:Receive Data write & Clear */
+#define Int_SWInt 0x00000020 /* 1:Software request & Clear */
+#define Int_IntBLEx 0x00000010 /* 1:Buffer List Empty & Clear */
+#define Int_IntFDAEx 0x00000008 /* 1:FDA Empty & Clear */
+#define Int_IntPCI 0x00000004 /* 1:PCI controller & Clear */
+#define Int_IntMacRx 0x00000002 /* 1:Rx controller & Clear */
+#define Int_IntMacTx 0x00000001 /* 1:Tx controller & Clear */
/* MD_CA bit asign --------------------------------------------------------- */
-#define MD_CA_PreSup 0x00001000 /* 1:Preamble Supress */
-#define MD_CA_Busy 0x00000800 /* 1:Busy (Start Operation) */
-#define MD_CA_Wr 0x00000400 /* 1:Write 0:Read */
+#define MD_CA_PreSup 0x00001000 /* 1:Preamble Supress */
+#define MD_CA_Busy 0x00000800 /* 1:Busy (Start Operation) */
+#define MD_CA_Wr 0x00000400 /* 1:Write 0:Read */
/*
#define FD_ALIGN 16
/* Frame Descripter bit asign ---------------------------------------------- */
-#define FD_FDLength_MASK 0x0000FFFF /* Length MASK */
-#define FD_BDCnt_MASK 0x001F0000 /* BD count MASK in FD */
-#define FD_FrmOpt_MASK 0x7C000000 /* Frame option MASK */
+#define FD_FDLength_MASK 0x0000FFFF /* Length MASK */
+#define FD_BDCnt_MASK 0x001F0000 /* BD count MASK in FD */
+#define FD_FrmOpt_MASK 0x7C000000 /* Frame option MASK */
#define FD_FrmOpt_BigEndian 0x40000000 /* Tx/Rx */
-#define FD_FrmOpt_IntTx 0x20000000 /* Tx only */
-#define FD_FrmOpt_NoCRC 0x10000000 /* Tx only */
+#define FD_FrmOpt_IntTx 0x20000000 /* Tx only */
+#define FD_FrmOpt_NoCRC 0x10000000 /* Tx only */
#define FD_FrmOpt_NoPadding 0x08000000 /* Tx only */
#define FD_FrmOpt_Packing 0x04000000 /* Rx only */
-#define FD_CownsFD 0x80000000 /* FD Controller owner bit */
-#define FD_Next_EOL 0x00000001 /* FD EOL indicator */
-#define FD_BDCnt_SHIFT 16
+#define FD_CownsFD 0x80000000 /* FD Controller owner bit */
+#define FD_Next_EOL 0x00000001 /* FD EOL indicator */
+#define FD_BDCnt_SHIFT 16
/* Buffer Descripter bit asign --------------------------------------------- */
-#define BD_BuffLength_MASK 0x0000FFFF /* Recieve Data Size */
-#define BD_RxBDID_MASK 0x00FF0000 /* BD ID Number MASK */
-#define BD_RxBDSeqN_MASK 0x7F000000 /* Rx BD Sequence Number */
-#define BD_CownsBD 0x80000000 /* BD Controller owner bit */
-#define BD_RxBDID_SHIFT 16
+#define BD_BuffLength_MASK 0x0000FFFF /* Recieve Data Size */
+#define BD_RxBDID_MASK 0x00FF0000 /* BD ID Number MASK */
+#define BD_RxBDSeqN_MASK 0x7F000000 /* Rx BD Sequence Number */
+#define BD_CownsBD 0x80000000 /* BD Controller owner bit */
+#define BD_RxBDID_SHIFT 16
#define BD_RxBDSeqN_SHIFT 24
/* Tuning parameters */
#define DMA_BURST_SIZE 32
#define TX_THRESHOLD 1024
-#define TX_THRESHOLD_MAX 1536 /* used threshold with packet max byte for low pci transfer ability.*/
-#define TX_THRESHOLD_KEEP_LIMIT 10 /* setting threshold max value when overrun error occured this count. */
+/* used threshold with packet max byte for low pci transfer ability.*/
+#define TX_THRESHOLD_MAX 1536
+/* setting threshold max value when overrun error occured this count. */
+#define TX_THRESHOLD_KEEP_LIMIT 10
/* 16 + RX_BUF_NUM * 8 + RX_FD_NUM * 16 + TX_FD_NUM * 32 <= PAGE_SIZE*FD_PAGE_NUM */
#ifdef TC35815_USE_PACKEDBUFFER
int max_tx_qlen;
int tx_ints;
int rx_ints;
- int tx_underrun;
+ int tx_underrun;
} lstats;
/* Tx control lock. This protects the transmit buffer ring
* RX_BUF_NUM BD in Free Buffer FD.
* One Free Buffer BD has ETH_FRAME_LEN data buffer.
*/
- void * fd_buf; /* for TxFD, RxFD, FrFD */
+ void *fd_buf; /* for TxFD, RxFD, FrFD */
dma_addr_t fd_buf_dma;
struct TxFD *tfd_base;
unsigned int tfd_start;
struct FrFD *fbl_ptr;
#ifdef TC35815_USE_PACKEDBUFFER
unsigned char fbl_curid;
- void * data_buf[RX_BUF_NUM]; /* packing */
+ void *data_buf[RX_BUF_NUM]; /* packing */
dma_addr_t data_buf_dma[RX_BUF_NUM];
struct {
struct sk_buff *skb;
}
#define TC35815_DMA_SYNC_ONDEMAND
-static void* alloc_rxbuf_page(struct pci_dev *hwdev, dma_addr_t *dma_handle)
+static void *alloc_rxbuf_page(struct pci_dev *hwdev, dma_addr_t *dma_handle)
{
#ifdef TC35815_DMA_SYNC_ONDEMAND
void *buf;
/* pci_map + pci_dma_sync will be more effective than
* pci_alloc_consistent on some archs. */
- if ((buf = (void *)__get_free_page(GFP_ATOMIC)) == NULL)
+ buf = (void *)__get_free_page(GFP_ATOMIC);
+ if (!buf)
return NULL;
*dma_handle = pci_map_single(hwdev, buf, PAGE_SIZE,
PCI_DMA_FROMDEVICE);
static int tc35815_close(struct net_device *dev);
static struct net_device_stats *tc35815_get_stats(struct net_device *dev);
static void tc35815_set_multicast_list(struct net_device *dev);
-static void tc35815_tx_timeout(struct net_device *dev);
+static void tc35815_tx_timeout(struct net_device *dev);
static int tc35815_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
#ifdef CONFIG_NET_POLL_CONTROLLER
static void tc35815_poll_controller(struct net_device *dev);
static const struct ethtool_ops tc35815_ethtool_ops;
/* Example routines you must write ;->. */
-static void tc35815_chip_reset(struct net_device *dev);
-static void tc35815_chip_init(struct net_device *dev);
+static void tc35815_chip_reset(struct net_device *dev);
+static void tc35815_chip_init(struct net_device *dev);
#ifdef DEBUG
static void panic_queues(struct net_device *dev);
}
#endif
-static int __devinit tc35815_init_dev_addr (struct net_device *dev)
+static int __devinit tc35815_init_dev_addr(struct net_device *dev)
{
struct tc35815_regs __iomem *tr =
(struct tc35815_regs __iomem *)dev->base_addr;
return 0;
}
-static int __devinit tc35815_init_one (struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int __devinit tc35815_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
void __iomem *ioaddr = NULL;
struct net_device *dev;
}
/* dev zeroed in alloc_etherdev */
- dev = alloc_etherdev (sizeof (*lp));
+ dev = alloc_etherdev(sizeof(*lp));
if (dev == NULL) {
dev_err(&pdev->dev, "unable to alloc new ethernet\n");
return -ENOMEM;
#endif
dev->irq = pdev->irq;
- dev->base_addr = (unsigned long) ioaddr;
+ dev->base_addr = (unsigned long)ioaddr;
INIT_WORK(&lp->restart_work, tc35815_restart_work);
spin_lock_init(&lp->lock);
random_ether_addr(dev->dev_addr);
}
- rc = register_netdev (dev);
+ rc = register_netdev(dev);
if (rc)
goto err_out;
err_out_unregister:
unregister_netdev(dev);
err_out:
- free_netdev (dev);
+ free_netdev(dev);
return rc;
}
-static void __devexit tc35815_remove_one (struct pci_dev *pdev)
+static void __devexit tc35815_remove_one(struct pci_dev *pdev)
{
- struct net_device *dev = pci_get_drvdata (pdev);
+ struct net_device *dev = pci_get_drvdata(pdev);
struct tc35815_local *lp = netdev_priv(dev);
phy_disconnect(lp->phy_dev);
mdiobus_unregister(&lp->mii_bus);
kfree(lp->mii_bus.irq);
- unregister_netdev (dev);
- free_netdev (dev);
-
- pci_set_drvdata (pdev, NULL);
+ unregister_netdev(dev);
+ free_netdev(dev);
+ pci_set_drvdata(pdev, NULL);
}
static int
sizeof(struct TxFD) * TX_FD_NUM >
PAGE_SIZE * FD_PAGE_NUM);
- if ((lp->fd_buf = pci_alloc_consistent(lp->pci_dev, PAGE_SIZE * FD_PAGE_NUM, &lp->fd_buf_dma)) == 0)
+ lp->fd_buf = pci_alloc_consistent(lp->pci_dev,
+ PAGE_SIZE * FD_PAGE_NUM,
+ &lp->fd_buf_dma);
+ if (!lp->fd_buf)
return -ENOMEM;
for (i = 0; i < RX_BUF_NUM; i++) {
#ifdef TC35815_USE_PACKEDBUFFER
- if ((lp->data_buf[i] = alloc_rxbuf_page(lp->pci_dev, &lp->data_buf_dma[i])) == NULL) {
+ lp->data_buf[i] =
+ alloc_rxbuf_page(lp->pci_dev,
+ &lp->data_buf_dma[i]);
+ if (!lp->data_buf[i]) {
while (--i >= 0) {
free_rxbuf_page(lp->pci_dev,
lp->data_buf[i],
#endif
printk("\n");
} else {
- for (i = 0; i < FD_PAGE_NUM; i++) {
- clear_page((void *)((unsigned long)lp->fd_buf + i * PAGE_SIZE));
- }
+ for (i = 0; i < FD_PAGE_NUM; i++)
+ clear_page((void *)((unsigned long)lp->fd_buf +
+ i * PAGE_SIZE));
}
fd_addr = (unsigned long)lp->fd_buf;
/* Free Descriptors (for Receive) */
lp->rfd_base = (struct RxFD *)fd_addr;
fd_addr += sizeof(struct RxFD) * RX_FD_NUM;
- for (i = 0; i < RX_FD_NUM; i++) {
+ for (i = 0; i < RX_FD_NUM; i++)
lp->rfd_base[i].fd.FDCtl = cpu_to_le32(FD_CownsFD);
- }
lp->rfd_cur = lp->rfd_base;
lp->rfd_limit = (struct RxFD *)fd_addr - (RX_FD_RESERVE + 1);
le32_to_cpu(fd->fd.FDStat),
le32_to_cpu(fd->fd.FDCtl));
if (le32_to_cpu(fd->fd.FDCtl) & FD_CownsFD)
- return 0;
+ return 0;
printk("BD: ");
for (i = 0; i < bd_count; i++)
printk(" %08x %08x",
* This is used if the interrupt line can turned off (shared).
* See 3c503.c for an example of selecting the IRQ at config-time.
*/
- if (request_irq(dev->irq, &tc35815_interrupt, IRQF_SHARED, dev->name, dev)) {
+ if (request_irq(dev->irq, &tc35815_interrupt, IRQF_SHARED,
+ dev->name, dev))
return -EAGAIN;
- }
tc35815_chip_reset(dev);
struct tc35815_regs __iomem *tr =
(struct tc35815_regs __iomem *)dev->base_addr;
int head = (lp->tfd_start + TX_FD_NUM - 1) % TX_FD_NUM;
- struct TxFD* txhead = &lp->tfd_base[head];
+ struct TxFD *txhead = &lp->tfd_base[head];
int qlen = (lp->tfd_start + TX_FD_NUM
- lp->tfd_end) % TX_FD_NUM;
* condition, and space has now been made available,
* wake up the queue.
*/
- if (netif_queue_stopped(dev) && ! tc35815_tx_full(dev))
+ if (netif_queue_stopped(dev) && !tc35815_tx_full(dev))
netif_wake_queue(dev);
}
struct tc35815_regs __iomem *tr =
(struct tc35815_regs __iomem *)dev->base_addr;
- if (dev->flags&IFF_PROMISC)
- {
+ if (dev->flags & IFF_PROMISC) {
#ifdef WORKAROUND_100HALF_PROMISC
/* With some (all?) 100MHalf HUB, controller will hang
* if we enabled promiscuous mode before linkup... */
#endif
/* Enable promiscuous mode */
tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc | CAM_StationAcc, &tr->CAM_Ctl);
- }
- else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > CAM_ENTRY_MAX - 3)
- {
+ } else if ((dev->flags & IFF_ALLMULTI) ||
+ dev->mc_count > CAM_ENTRY_MAX - 3) {
/* CAM 0, 1, 20 are reserved. */
/* Disable promiscuous mode, use normal mode. */
tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc, &tr->CAM_Ctl);
- }
- else if(dev->mc_count)
- {
- struct dev_mc_list* cur_addr = dev->mc_list;
+ } else if (dev->mc_count) {
+ struct dev_mc_list *cur_addr = dev->mc_list;
int i;
int ena_bits = CAM_Ena_Bit(CAM_ENTRY_SOURCE);
}
tc_writel(ena_bits, &tr->CAM_Ena);
tc_writel(CAM_CompEn | CAM_BroadAcc, &tr->CAM_Ctl);
- }
- else {
+ } else {
tc_writel(CAM_Ena_Bit(CAM_ENTRY_SOURCE), &tr->CAM_Ena);
tc_writel(CAM_CompEn | CAM_BroadAcc, &tr->CAM_Ctl);
}
projects / linux-2.6 / commitdiff