Input: ads7846 - miscellaneous fixes

- Add disable attribute to support device locking mode where
  unintentional touch event shouldn't wake up the system;
- Update comments;
- Add missing spin_lock_init;
- Do device resume with the lock held;
- Do cleanup calls / free memory in the reverse order of initialization.

Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index bdec112e89c4b4c79966fc9d63c70370ef7d7882..fec3b9b22309fe5e8d74ebe204f707805c54be56 100644 (file)
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -2,6 +2,8 @@
  * ADS7846 based touchscreen and sensor driver
  *
  * Copyright (c) 2005 David Brownell
+ * Copyright (c) 2006 Nokia Corporation
+ * Various changes: Imre Deak <imre.deak@nokia.com>
  *
  * Using code from:
  *  - corgi_ts.c
@@ -34,17 +36,25 @@
 
 
 /*
- * This code has been lightly tested on an ads7846.
+ * This code has been tested on an ads7846 / N770 device.
  * Support for ads7843 and ads7845 has only been stubbed in.
  *
- * Not yet done:  investigate the values reported.  Are x/y/pressure
- * event values sane enough for X11?  How accurate are the temperature
- * and voltage readings?  (System-specific calibration should support
+ * Not yet done:  How accurate are the temperature and voltage
+ * readings? (System-specific calibration should support
  * accuracy of 0.3 degrees C; otherwise it's 2.0 degrees.)
  *
+ * IRQ handling needs a workaround because of a shortcoming in handling
+ * edge triggered IRQs on some platforms like the OMAP1/2. These
+ * platforms don't handle the ARM lazy IRQ disabling properly, thus we
+ * have to maintain our own SW IRQ disabled status. This should be
+ * removed as soon as the affected platform's IRQ handling is fixed.
+ *
  * app note sbaa036 talks in more detail about accurate sampling...
  * that ought to help in situations like LCDs inducing noise (which
  * can also be helped by using synch signals) and more generally.
+ * This driver tries to utilize the measures described in the app
+ * note. The strength of filtering can be set in the board-* specific
+ * files.
  */
 
 #define        TS_POLL_PERIOD  msecs_to_jiffies(10)
@@ -91,6 +101,7 @@ struct ads7846 {
        unsigned                pending:1;      /* P: lock */
 // FIXME remove "irq_disabled"
        unsigned                irq_disabled:1; /* P: lock */
+       unsigned                disabled:1;
 };
 
 /* leave chip selected when we're done, for quicker re-select? */
@@ -161,6 +172,9 @@ struct ser_req {
        struct spi_transfer     xfer[6];
 };
 
+static void ads7846_enable(struct ads7846 *ts);
+static void ads7846_disable(struct ads7846 *ts);
+
 static int ads7846_read12_ser(struct device *dev, unsigned command)
 {
        struct spi_device       *spi = to_spi_device(dev);
@@ -257,6 +271,37 @@ static ssize_t ads7846_pen_down_show(struct device *dev,
 
 static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL);
 
+static ssize_t ads7846_disable_show(struct device *dev,
+                                    struct device_attribute *attr, char *buf)
+{
+       struct ads7846  *ts = dev_get_drvdata(dev);
+
+       return sprintf(buf, "%u\n", ts->disabled);
+}
+
+static ssize_t ads7846_disable_store(struct device *dev,
+                                    struct device_attribute *attr,
+                                    const char *buf, size_t count)
+{
+       struct ads7846 *ts = dev_get_drvdata(dev);
+       char *endp;
+       int i;
+
+       i = simple_strtoul(buf, &endp, 10);
+       spin_lock_irq(&ts->lock);
+
+       if (i)
+               ads7846_disable(ts);
+       else
+               ads7846_enable(ts);
+
+       spin_unlock_irq(&ts->lock);
+
+       return count;
+}
+
+static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
+
 /*--------------------------------------------------------------------------*/
 
 /*
@@ -396,12 +441,9 @@ static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
 {
        struct ads7846 *ts = handle;
        unsigned long flags;
-       int r = IRQ_HANDLED;
 
        spin_lock_irqsave(&ts->lock, flags);
-       if (ts->irq_disabled)
-               r = IRQ_HANDLED;
-       else {
+       if (likely(!ts->irq_disabled && !ts->disabled)) {
                if (!ts->irq_disabled) {
                        /* REVISIT irq logic for many ARM chips has cloned a
                         * bug wherein disabling an irq in its handler won't
@@ -419,20 +461,17 @@ static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
                }
        }
        spin_unlock_irqrestore(&ts->lock, flags);
-       return r;
+
+       return IRQ_HANDLED;
 }
 
 /*--------------------------------------------------------------------------*/
 
-static int
-ads7846_suspend(struct spi_device *spi, pm_message_t message)
+/* Must be called with ts->lock held */
+static void ads7846_disable(struct ads7846 *ts)
 {
-       struct ads7846 *ts = dev_get_drvdata(&spi->dev);
-       unsigned long   flags;
-
-       spin_lock_irqsave(&ts->lock, flags);
-
-       spi->dev.power.power_state = message;
+       if (ts->disabled)
+               return;
 
        /* are we waiting for IRQ, or polling? */
        if (!ts->pendown) {
@@ -448,9 +487,9 @@ ads7846_suspend(struct spi_device *spi, pm_message_t message)
                        mod_timer(&ts->timer, jiffies);
 
                while (ts->pendown || ts->pending) {
-                       spin_unlock_irqrestore(&ts->lock, flags);
+                       spin_unlock_irq(&ts->lock);
                        msleep(1);
-                       spin_lock_irqsave(&ts->lock, flags);
+                       spin_lock_irq(&ts->lock);
                }
        }
 
@@ -458,17 +497,46 @@ ads7846_suspend(struct spi_device *spi, pm_message_t message)
         * leave it that way after every request
         */
 
-       spin_unlock_irqrestore(&ts->lock, flags);
+       ts->disabled = 1;
+}
+
+/* Must be called with ts->lock held */
+static void ads7846_enable(struct ads7846 *ts)
+{
+       if (!ts->disabled)
+               return;
+
+       ts->disabled = 0;
+       ts->irq_disabled = 0;
+       enable_irq(ts->spi->irq);
+}
+
+static int ads7846_suspend(struct spi_device *spi, pm_message_t message)
+{
+       struct ads7846 *ts = dev_get_drvdata(&spi->dev);
+
+       spin_lock_irq(&ts->lock);
+
+       spi->dev.power.power_state = message;
+       ads7846_disable(ts);
+
+       spin_unlock_irq(&ts->lock);
+
        return 0;
+
 }
 
 static int ads7846_resume(struct spi_device *spi)
 {
        struct ads7846 *ts = dev_get_drvdata(&spi->dev);
 
-       ts->irq_disabled = 0;
-       enable_irq(ts->spi->irq);
+       spin_lock_irq(&ts->lock);
+
        spi->dev.power.power_state = PMSG_ON;
+       ads7846_enable(ts);
+
+       spin_unlock_irq(&ts->lock);
+
        return 0;
 }
 
@@ -521,6 +589,8 @@ static int __devinit ads7846_probe(struct spi_device *spi)
        ts->timer.data = (unsigned long) ts;
        ts->timer.function = ads7846_timer;
 
+       spin_lock_init(&ts->lock);
+
        ts->model = pdata->model ? : 7846;
        ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
        ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
@@ -671,13 +741,25 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
        device_create_file(&spi->dev, &dev_attr_pen_down);
 
+       device_create_file(&spi->dev, &dev_attr_disable);
+
        err = input_register_device(input_dev);
        if (err)
-               goto err_free_irq;
+               goto err_remove_attr;
 
        return 0;
 
- err_free_irq:
+ err_remove_attr:
+       device_remove_file(&spi->dev, &dev_attr_disable);
+       device_remove_file(&spi->dev, &dev_attr_pen_down);
+       if (ts->model == 7846) {
+               device_remove_file(&spi->dev, &dev_attr_temp1);
+               device_remove_file(&spi->dev, &dev_attr_temp0);
+       }
+       if (ts->model != 7845)
+               device_remove_file(&spi->dev, &dev_attr_vbatt);
+       device_remove_file(&spi->dev, &dev_attr_vaux);
+
        free_irq(spi->irq, ts);
  err_free_mem:
        input_free_device(input_dev);
@@ -689,22 +771,24 @@ static int __devexit ads7846_remove(struct spi_device *spi)
 {
        struct ads7846          *ts = dev_get_drvdata(&spi->dev);
 
+       input_unregister_device(ts->input);
+
        ads7846_suspend(spi, PMSG_SUSPEND);
-       free_irq(ts->spi->irq, ts);
-       if (ts->irq_disabled)
-               enable_irq(ts->spi->irq);
 
+       device_remove_file(&spi->dev, &dev_attr_disable);
        device_remove_file(&spi->dev, &dev_attr_pen_down);
-
        if (ts->model == 7846) {
-               device_remove_file(&spi->dev, &dev_attr_temp0);
                device_remove_file(&spi->dev, &dev_attr_temp1);
+               device_remove_file(&spi->dev, &dev_attr_temp0);
        }
        if (ts->model != 7845)
                device_remove_file(&spi->dev, &dev_attr_vbatt);
        device_remove_file(&spi->dev, &dev_attr_vaux);
 
-       input_unregister_device(ts->input);
+       free_irq(ts->spi->irq, ts);
+       if (ts->irq_disabled)
+               enable_irq(ts->spi->irq);
+
        kfree(ts);
 
        dev_dbg(&spi->dev, "unregistered touchscreen\n");