This is needed if we wish to change the size of the resource structures.
Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
}
if (print_info) {
- printk(KERN_INFO "%s: CardBus functions mapped %8.8lx->%p\n",
- print_name, pci_resource_start(pdev, 2),
+ printk(KERN_INFO "%s: CardBus functions mapped "
+ "%16.16llx->%p\n",
+ print_name,
+ (unsigned long long)pci_resource_start(pdev, 2),
vp->cb_fn_base);
}
EL3WINDOW(2);
}
if (pci_resource_len(pdev, 1) < CP_REGS_SIZE) {
rc = -EIO;
- printk(KERN_ERR PFX "MMIO resource (%lx) too small on pci dev %s\n",
- pci_resource_len(pdev, 1), pci_name(pdev));
+ printk(KERN_ERR PFX "MMIO resource (%llx) too small on pci dev %s\n",
+ (unsigned long long)pci_resource_len(pdev, 1), pci_name(pdev));
goto err_out_res;
}
regs = ioremap(pciaddr, CP_REGS_SIZE);
if (!regs) {
rc = -EIO;
- printk(KERN_ERR PFX "Cannot map PCI MMIO (%lx@%lx) on pci dev %s\n",
- pci_resource_len(pdev, 1), pciaddr, pci_name(pdev));
+ printk(KERN_ERR PFX "Cannot map PCI MMIO (%llx@%llx) on pci dev %s\n",
+ (unsigned long long)pci_resource_len(pdev, 1),
+ (unsigned long long)pciaddr, pci_name(pdev));
goto err_out_res;
}
dev->base_addr = (unsigned long) regs;
netif_start_queue (dev);
if (netif_msg_ifup(tp))
- printk(KERN_DEBUG "%s: rtl8139_open() ioaddr %#lx IRQ %d"
- " GP Pins %2.2x %s-duplex.\n",
- dev->name, pci_resource_start (tp->pci_dev, 1),
+ printk(KERN_DEBUG "%s: rtl8139_open() ioaddr %#llx IRQ %d"
+ " GP Pins %2.2x %s-duplex.\n", dev->name,
+ (unsigned long long)pci_resource_start (tp->pci_dev, 1),
dev->irq, RTL_R8 (MediaStatus),
tp->mii.full_duplex ? "full" : "half");
goto err_out_free;
}
- DPRINTK(PROBE, INFO, "addr 0x%lx, irq %d, "
+ DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, "
"MAC addr %02X:%02X:%02X:%02X:%02X:%02X\n",
- pci_resource_start(pdev, 0), pdev->irq,
+ (unsigned long long)pci_resource_start(pdev, 0), pdev->irq,
netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]);
if (err)
goto err_out_free_irq;
- printk(KERN_INFO PFX DRV_VERSION " addr 0x%lx irq %d chip %s rev %d\n",
- pci_resource_start(pdev, 0), pdev->irq,
+ printk(KERN_INFO PFX DRV_VERSION " addr 0x%llx irq %d chip %s rev %d\n",
+ (unsigned long long)pci_resource_start(pdev, 0), pdev->irq,
skge_board_name(hw), hw->chip_rev);
if ((dev = skge_devinit(hw, 0, using_dac)) == NULL)
if (err)
goto err_out_iounmap;
- printk(KERN_INFO PFX "v%s addr 0x%lx irq %d Yukon-%s (0x%x) rev %d\n",
- DRV_VERSION, pci_resource_start(pdev, 0), pdev->irq,
- yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
+ printk(KERN_INFO PFX "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n",
+ DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0),
+ pdev->irq, yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
hw->chip_id, hw->chip_rev);
dev = sky2_init_netdev(hw, 0, using_dac);
}
if (pci_resource_len(pdev, 1) < DE_REGS_SIZE) {
rc = -EIO;
- printk(KERN_ERR PFX "MMIO resource (%lx) too small on pci dev %s\n",
- pci_resource_len(pdev, 1), pci_name(pdev));
+ printk(KERN_ERR PFX "MMIO resource (%llx) too small on pci dev %s\n",
+ (unsigned long long)pci_resource_len(pdev, 1), pci_name(pdev));
goto err_out_res;
}
regs = ioremap_nocache(pciaddr, DE_REGS_SIZE);
if (!regs) {
rc = -EIO;
- printk(KERN_ERR PFX "Cannot map PCI MMIO (%lx@%lx) on pci dev %s\n",
- pci_resource_len(pdev, 1), pciaddr, pci_name(pdev));
+ printk(KERN_ERR PFX "Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n",
+ (unsigned long long)pci_resource_len(pdev, 1),
+ pciaddr, pci_name(pdev));
goto err_out_res;
}
dev->base_addr = (unsigned long) regs;
SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) {
- printk (KERN_ERR PFX "%s: I/O region (0x%lx@0x%lx) too small, "
+ printk (KERN_ERR PFX "%s: I/O region (0x%llx@0x%llx) too small, "
"aborting\n", pci_name(pdev),
- pci_resource_len (pdev, 0),
- pci_resource_start (pdev, 0));
+ (unsigned long long)pci_resource_len (pdev, 0),
+ (unsigned long long)pci_resource_start (pdev, 0));
goto err_out_free_netdev;
}
pci_set_drvdata(pdev, dev);
- printk(KERN_INFO "%s: %s at %s 0x%lx, ",
+ printk(KERN_INFO "%s: %s at %s 0x%llx, ",
dev->name, typhoon_card_info[card_id].name,
- use_mmio ? "MMIO" : "IO", pci_resource_start(pdev, use_mmio));
+ use_mmio ? "MMIO" : "IO",
+ (unsigned long long)pci_resource_start(pdev, use_mmio));
for(i = 0; i < 5; i++)
printk("%2.2x:", dev->dev_addr[i]);
printk("%2.2x\n", dev->dev_addr[i]);
ioaddr = ioremap(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0));
if (!ioaddr) {
- printk(KERN_ERR "%s: cannot remap MMIO region %lx @ %lx\n",
- DRV_NAME, pci_resource_len(pdev, 0),
- pci_resource_start(pdev, 0));
+ printk(KERN_ERR "%s: cannot remap MMIO region %llx @ %llx\n",
+ DRV_NAME, (unsigned long long)pci_resource_len(pdev, 0),
+ (unsigned long long)pci_resource_start(pdev, 0));
rc = -EIO;
goto err_free_mmio_regions_2;
}
- printk(KERN_DEBUG "Siemens DSCC4, MMIO at %#lx (regs), %#lx (lbi), IRQ %d\n",
- pci_resource_start(pdev, 0),
- pci_resource_start(pdev, 1), pdev->irq);
+ printk(KERN_DEBUG "Siemens DSCC4, MMIO at %#llx (regs), %#llx (lbi), IRQ %d\n",
+ (unsigned long long)pci_resource_start(pdev, 0),
+ (unsigned long long)pci_resource_start(pdev, 1), pdev->irq);
/* Cf errata DS5 p.2 */
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xf8);
card = (pc300_t *) kmalloc(sizeof(pc300_t), GFP_KERNEL);
if (card == NULL) {
- printk("PC300 found at RAM 0x%08lx, "
+ printk("PC300 found at RAM 0x%016llx, "
"but could not allocate card structure.\n",
- pci_resource_start(pdev, 3));
+ (unsigned long long)pci_resource_start(pdev, 3));
err = -ENOMEM;
goto err_disable_dev;
}