.attr = {
.name = "hs_reg",
.mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = VAL_LEN_MAX,
.read = mv64xxx_hs_reg_read,
.attr = {
.name = "binary_parameter",
.mode = S_IRUGO,
- .owner = THIS_MODULE,
},
.size = PAGE_SIZE,
.read = &ipl_parameter_read,
.attr = {
.name = "scp_data",
.mode = S_IRUGO,
- .owner = THIS_MODULE,
},
.size = PAGE_SIZE,
.read = &ipl_scp_data_read,
bus->drivers_probe_attr.attr.name = "drivers_probe";
bus->drivers_probe_attr.attr.mode = S_IWUSR;
- bus->drivers_probe_attr.attr.owner = bus->owner;
bus->drivers_probe_attr.store = store_drivers_probe;
retval = bus_create_file(bus, &bus->drivers_probe_attr);
if (retval)
bus->drivers_autoprobe_attr.attr.name = "drivers_autoprobe";
bus->drivers_autoprobe_attr.attr.mode = S_IWUSR | S_IRUGO;
- bus->drivers_autoprobe_attr.attr.owner = bus->owner;
bus->drivers_autoprobe_attr.show = show_drivers_autoprobe;
bus->drivers_autoprobe_attr.store = store_drivers_autoprobe;
retval = bus_create_file(bus, &bus->drivers_autoprobe_attr);
goto out3;
class_dev->uevent_attr.attr.name = "uevent";
class_dev->uevent_attr.attr.mode = S_IWUSR;
- class_dev->uevent_attr.attr.owner = parent_class->owner;
class_dev->uevent_attr.store = store_uevent;
error = class_device_create_file(class_dev, &class_dev->uevent_attr);
if (error)
}
attr->attr.name = "dev";
attr->attr.mode = S_IRUGO;
- attr->attr.owner = parent_class->owner;
attr->show = show_dev;
error = class_device_create_file(class_dev, attr);
if (error) {
dev->uevent_attr.attr.name = "uevent";
dev->uevent_attr.attr.mode = S_IRUGO | S_IWUSR;
- if (dev->driver)
- dev->uevent_attr.attr.owner = dev->driver->owner;
dev->uevent_attr.store = store_uevent;
dev->uevent_attr.show = show_uevent;
error = device_create_file(dev, &dev->uevent_attr);
}
attr->attr.name = "dev";
attr->attr.mode = S_IRUGO;
- if (dev->driver)
- attr->attr.owner = dev->driver->owner;
attr->show = show_dev;
error = device_create_file(dev, attr);
if (error) {
}
static struct bin_attribute firmware_attr_data_tmpl = {
- .attr = {.name = "data", .mode = 0644, .owner = THIS_MODULE},
+ .attr = {.name = "data", .mode = 0644},
.size = 0,
.read = firmware_data_read,
.write = firmware_data_write,
**********************************************************/
#define DEF_ATTR(_obj,_name,_mode) \
- static struct attribute _obj = { \
- .name = _name, .owner = THIS_MODULE, .mode = _mode }
+ static struct attribute _obj = { .name = _name, .mode = _mode }
/**********************************************************
/sys/class/pktcdvd/pktcdvd[0-7]/
int err;
bmc->device_id_attr.attr.name = "device_id";
- bmc->device_id_attr.attr.owner = THIS_MODULE;
bmc->device_id_attr.attr.mode = S_IRUGO;
bmc->device_id_attr.show = device_id_show;
bmc->provides_dev_sdrs_attr.attr.name = "provides_device_sdrs";
- bmc->provides_dev_sdrs_attr.attr.owner = THIS_MODULE;
bmc->provides_dev_sdrs_attr.attr.mode = S_IRUGO;
bmc->provides_dev_sdrs_attr.show = provides_dev_sdrs_show;
bmc->revision_attr.attr.name = "revision";
- bmc->revision_attr.attr.owner = THIS_MODULE;
bmc->revision_attr.attr.mode = S_IRUGO;
bmc->revision_attr.show = revision_show;
bmc->firmware_rev_attr.attr.name = "firmware_revision";
- bmc->firmware_rev_attr.attr.owner = THIS_MODULE;
bmc->firmware_rev_attr.attr.mode = S_IRUGO;
bmc->firmware_rev_attr.show = firmware_rev_show;
bmc->version_attr.attr.name = "ipmi_version";
- bmc->version_attr.attr.owner = THIS_MODULE;
bmc->version_attr.attr.mode = S_IRUGO;
bmc->version_attr.show = ipmi_version_show;
bmc->add_dev_support_attr.attr.name = "additional_device_support";
- bmc->add_dev_support_attr.attr.owner = THIS_MODULE;
bmc->add_dev_support_attr.attr.mode = S_IRUGO;
bmc->add_dev_support_attr.show = add_dev_support_show;
bmc->manufacturer_id_attr.attr.name = "manufacturer_id";
- bmc->manufacturer_id_attr.attr.owner = THIS_MODULE;
bmc->manufacturer_id_attr.attr.mode = S_IRUGO;
bmc->manufacturer_id_attr.show = manufacturer_id_show;
bmc->product_id_attr.attr.name = "product_id";
- bmc->product_id_attr.attr.owner = THIS_MODULE;
bmc->product_id_attr.attr.mode = S_IRUGO;
bmc->product_id_attr.show = product_id_show;
bmc->guid_attr.attr.name = "guid";
- bmc->guid_attr.attr.owner = THIS_MODULE;
bmc->guid_attr.attr.mode = S_IRUGO;
bmc->guid_attr.show = guid_show;
bmc->aux_firmware_rev_attr.attr.name = "aux_firmware_revision";
- bmc->aux_firmware_rev_attr.attr.owner = THIS_MODULE;
bmc->aux_firmware_rev_attr.attr.mode = S_IRUGO;
bmc->aux_firmware_rev_attr.show = aux_firmware_rev_show;
#define CPUFREQ_STATDEVICE_ATTR(_name,_mode,_show) \
static struct freq_attr _attr_##_name = {\
- .attr = {.name = __stringify(_name), .owner = THIS_MODULE, \
- .mode = _mode, }, \
+ .attr = {.name = __stringify(_name), .mode = _mode, }, \
.show = _show,\
};
static struct freq_attr freq_attr_scaling_setspeed =
{
- .attr = { .name = "scaling_setspeed", .mode = 0644, .owner = THIS_MODULE },
+ .attr = { .name = "scaling_setspeed", .mode = 0644 },
.show = show_speed,
.store = store_speed,
};
struct freq_attr cpufreq_freq_attr_scaling_available_freqs = {
.attr = { .name = "scaling_available_frequencies",
.mode = 0444,
- .owner=THIS_MODULE
},
.show = show_available_freqs,
};
#define DCDBAS_BIN_ATTR_RW(_name) \
struct bin_attribute bin_attr_##_name = { \
.attr = { .name = __stringify(_name), \
- .mode = 0600, \
- .owner = THIS_MODULE }, \
+ .mode = 0600 }, \
.read = _name##_read, \
.write = _name##_write, \
}
}
static struct bin_attribute rbu_data_attr = {
- .attr = {.name = "data",.owner = THIS_MODULE,.mode = 0444},
+ .attr = {.name = "data", .mode = 0444},
.read = read_rbu_data,
};
static struct bin_attribute rbu_image_type_attr = {
- .attr = {.name = "image_type",.owner = THIS_MODULE,.mode = 0644},
+ .attr = {.name = "image_type", .mode = 0644},
.read = read_rbu_image_type,
.write = write_rbu_image_type,
};
static struct bin_attribute rbu_packet_size_attr = {
- .attr = {.name = "packet_size",.owner = THIS_MODULE,.mode = 0644},
+ .attr = {.name = "packet_size", .mode = 0644},
.read = read_rbu_packet_size,
.write = write_rbu_packet_size,
};
#define EDD_DEVICE_ATTR(_name,_mode,_show,_test) \
struct edd_attribute edd_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE }, \
+ .attr = {.name = __stringify(_name), .mode = _mode }, \
.show = _show, \
.test = _test, \
};
#define EFI_ATTR(_name, _mode, _show, _store) \
struct subsys_attribute efi_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+ .attr = {.name = __stringify(_name), .mode = _mode}, \
.show = _show, \
.store = _store, \
};
#define EFIVAR_ATTR(_name, _mode, _show, _store) \
struct efivar_attribute efivar_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+ .attr = {.name = __stringify(_name), .mode = _mode}, \
.show = _show, \
.store = _store, \
};
#define VAR_SUBSYS_ATTR(_name, _mode, _show, _store) \
struct subsys_attribute var_subsys_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+ .attr = {.name = __stringify(_name), .mode = _mode}, \
.show = _show, \
.store = _store, \
};
.attr = {
.name = "eeprom",
.mode = S_IRUGO,
- .owner = THIS_MODULE,
},
.size = EEPROM_SIZE,
.read = eeprom_read,
.attr = {
.name = "eeprom",
.mode = S_IRUGO,
- .owner = THIS_MODULE,
},
.size = USER_EEPROM_SIZE,
.read = max6875_read,
element->attr.attr.name = element->name;
element->attr.attr.mode = S_IRUGO;
- element->attr.attr.owner = THIS_MODULE;
element->attr.show = show;
element->index = i;
.attr = { \
.name = __stringify(_name), \
.mode = _mode, \
- .owner = THIS_MODULE, \
}, \
.show = psmouse_attr_show_helper, \
.store = psmouse_attr_set_helper, \
list_add(&new_ct->link, &wf_controls);
new_ct->attr.attr.name = new_ct->name;
- new_ct->attr.attr.owner = THIS_MODULE;
new_ct->attr.attr.mode = 0644;
new_ct->attr.show = wf_show_control;
new_ct->attr.store = wf_store_control;
list_add(&new_sr->link, &wf_sensors);
new_sr->attr.attr.name = new_sr->name;
- new_sr->attr.attr.owner = THIS_MODULE;
new_sr->attr.attr.mode = 0444;
new_sr->attr.show = wf_show_sensor;
new_sr->attr.store = NULL;
struct device_attribute dev_attr_##_name = { \
.attr = { \
.name = __stringify(_name), \
- .mode = 0, \
- .owner = THIS_MODULE }, \
+ .mode = 0 }, \
.show = NULL, \
.store = NULL, \
}
#define ATTR(_name, _mode) \
struct attribute veth_##_name##_attr = { \
- .name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE \
+ .name = __stringify(_name), .mode = _mode, \
};
static ATTR(active, 0644);
#define PDCS_ATTR(_name, _mode, _show, _store) \
struct subsys_attribute pdcs_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+ .attr = {.name = __stringify(_name), .mode = _mode}, \
.show = _show, \
.store = _store, \
};
#define PATHS_ATTR(_name, _mode, _show, _store) \
struct pdcspath_attribute paths_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+ .attr = {.name = __stringify(_name), .mode = _mode}, \
.show = _show, \
.store = _store, \
};
static struct bin_attribute ibm_apci_table_attr = {
.attr = {
.name = "apci_table",
- .owner = THIS_MODULE,
.mode = S_IRUGO,
},
.read = ibm_read_apci_table,
sprintf(res_attr_name, "resource%d", i);
res_attr->attr.name = res_attr_name;
res_attr->attr.mode = S_IRUSR | S_IWUSR;
- res_attr->attr.owner = THIS_MODULE;
res_attr->size = pci_resource_len(pdev, i);
res_attr->mmap = pci_mmap_resource;
res_attr->private = &pdev->resource[i];
.attr = {
.name = "config",
.mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 256,
.read = pci_read_config,
.attr = {
.name = "config",
.mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 4096,
.read = pci_read_config,
rom_attr->size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
rom_attr->attr.name = "rom";
rom_attr->attr.mode = S_IRUSR;
- rom_attr->attr.owner = THIS_MODULE;
rom_attr->read = pci_read_rom;
rom_attr->write = pci_write_rom;
retval = sysfs_create_bin_file(&pdev->dev.kobj, rom_attr);
b->legacy_io->attr.name = "legacy_io";
b->legacy_io->size = 0xffff;
b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
- b->legacy_io->attr.owner = THIS_MODULE;
b->legacy_io->read = pci_read_legacy_io;
b->legacy_io->write = pci_write_legacy_io;
class_device_create_bin_file(&b->class_dev, b->legacy_io);
b->legacy_mem->attr.name = "legacy_mem";
b->legacy_mem->size = 1024*1024;
b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
- b->legacy_mem->attr.owner = THIS_MODULE;
b->legacy_mem->mmap = pci_mmap_legacy_mem;
class_device_create_bin_file(&b->class_dev, b->legacy_mem);
}
};
static struct bin_attribute pccard_cis_attr = {
- .attr = { .name = "cis", .mode = S_IRUGO | S_IWUSR, .owner = THIS_MODULE},
+ .attr = { .name = "cis", .mode = S_IRUGO | S_IWUSR },
.size = 0x200,
.read = pccard_show_cis,
.write = pccard_store_cis,
.attr = {
.name = "config",
.mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 0x200000,
.read = rio_read_config,
.attr = {
.name = "nvram",
.mode = S_IRUGO | S_IWUGO,
- .owner = THIS_MODULE,
},
.size = RTC_OFFSET,
.read = ds1553_nvram_read,
.attr = {
.name = "nvram",
.mode = S_IRUGO | S_IWUGO,
- .owner = THIS_MODULE,
},
.read = ds1742_nvram_read,
.write = ds1742_nvram_write,
.attr = {
.name = "measurement_chars",
.mode = S_IRUSR,
- .owner = THIS_MODULE,
},
.size = sizeof(struct cmg_chars),
.read = chp_measurement_chars_read,
.attr = {
.name = "measurement",
.mode = S_IRUSR,
- .owner = THIS_MODULE,
},
.size = sizeof(struct cmg_entry),
.read = chp_measurement_read,
#define QETH_DEVICE_ATTR(_id,_name,_mode,_show,_store) \
struct device_attribute dev_attr_##_id = { \
- .attr = {.name=__stringify(_name), .mode=_mode, .owner=THIS_MODULE },\
+ .attr = {.name=__stringify(_name), .mode=_mode, },\
.show = _show, \
.store = _store, \
};
.attr = {
.name = "mu_read",
.mode = S_IRUSR ,
- .owner = THIS_MODULE,
},
.size = 1032,
.read = arcmsr_sysfs_iop_message_read,
.attr = {
.name = "mu_write",
.mode = S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 1032,
.write = arcmsr_sysfs_iop_message_write,
.attr = {
.name = "mu_clear",
.mode = S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 1,
.write = arcmsr_sysfs_iop_message_clear,
memset(bin_attr, 0, sizeof(*bin_attr));
bin_attr->attr.name = SMP_BIN_ATTR_NAME;
- bin_attr->attr.owner = THIS_MODULE;
bin_attr->attr.mode = 0600;
bin_attr->size = 0;
.attr = {
.name = "ctlreg",
.mode = S_IRUSR | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 256,
.read = sysfs_ctlreg_read,
.attr = {
.name = "mbox",
.mode = S_IRUSR | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = MAILBOX_CMD_SIZE,
.read = sysfs_mbox_read,
.attr = {
.name = "fw_dump",
.mode = S_IRUSR | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 0,
.read = qla2x00_sysfs_read_fw_dump,
.attr = {
.name = "nvram",
.mode = S_IRUSR | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 512,
.read = qla2x00_sysfs_read_nvram,
.attr = {
.name = "optrom",
.mode = S_IRUSR | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = OPTROM_SIZE_24XX,
.read = qla2x00_sysfs_read_optrom,
.attr = {
.name = "optrom_ctl",
.mode = S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 0,
.write = qla2x00_sysfs_write_optrom_ctl,
.attr = {
.name = "vpd",
.mode = S_IRUSR | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 0,
.read = qla2x00_sysfs_read_vpd,
.attr = {
.name = "sfp",
.mode = S_IRUSR | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = SFP_DEV_SIZE * 2,
.read = qla2x00_sysfs_read_sfp,
*/
at25->bin.attr.name = "eeprom";
at25->bin.attr.mode = S_IRUSR;
- at25->bin.attr.owner = THIS_MODULE;
at25->bin.read = at25_bin_read;
at25->bin.size = at25->chip.byte_len;
static struct bin_attribute edid1_attr = {
.attr = {
.name = "edid1",
- .owner = THIS_MODULE,
.mode = 0444,
},
.size = EDID_LENGTH,
static struct bin_attribute edid2_attr = {
.attr = {
.name = "edid2",
- .owner = THIS_MODULE,
.mode = 0444,
},
.size = EDID_LENGTH,
#define DECLARE_ATTR(_name,_mode,_show,_store) \
{ \
- .attr = { .name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE }, \
+ .attr = { .name = __stringify(_name), .mode = _mode }, \
.show = _show, \
.store = _store, \
}
#define DECLARE_ATTR(_name,_mode,_show,_store) \
{ \
- .attr = { .name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE }, \
+ .attr = { .name = __stringify(_name), .mode = _mode }, \
.show = _show, \
.store = _store, \
}
.attr = {
.name = "eeprom",
.mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = W1_EEPROM_SIZE,
.read = w1_f23_read_bin,
.attr = {
.name = "w1_slave",
.mode = S_IRUGO,
- .owner = THIS_MODULE,
},
.size = W1_SLAVE_DATA_SIZE,
.read = w1_therm_read_bin,
.attr = {
.name = "id",
.mode = S_IRUGO,
- .owner = THIS_MODULE,
},
.size = 8,
.read = w1_slave_read_id,
.attr = {
.name = "rw",
.mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = PAGE_SIZE,
.read = w1_default_read,
.attr = {
.name = "config",
.mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE
},
.size = sizeof(struct ConfigDev),
.read = zorro_read_config,
goto out;
}
kobj_set_kset_s(&ecryptfs_subsys, fs_subsys);
- sysfs_attr_version.attr.owner = THIS_MODULE;
- sysfs_attr_version_str.attr.owner = THIS_MODULE;
rc = do_sysfs_registration();
if (rc) {
printk(KERN_ERR "sysfs registration failed\n");
#define define_mask(_name) { \
.attr = { \
.name = #_name, \
- .owner = THIS_MODULE, \
.mode = S_IRUGO | S_IWUSR, \
}, \
.mask = ML_##_name, \
static struct attribute addpartattr = {
.name = "whole_disk",
.mode = S_IRUSR | S_IRGRP | S_IROTH,
- .owner = THIS_MODULE,
};
sysfs_create_file(&p->kobj, &addpartattr);
if (!sysfs_get_active(attr_sd))
return -ENODEV;
- /* Grab the module reference for this attribute */
- error = -ENODEV;
- if (!try_module_get(attr->attr.owner))
- goto err_sput;
-
error = -EACCES;
if ((file->f_mode & FMODE_WRITE) && !(attr->write || attr->mmap))
- goto err_mput;
+ goto err_out;
if ((file->f_mode & FMODE_READ) && !(attr->read || attr->mmap))
- goto err_mput;
+ goto err_out;
error = -ENOMEM;
bb = kzalloc(sizeof(*bb), GFP_KERNEL);
if (!bb)
- goto err_mput;
+ goto err_out;
bb->buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!bb->buffer)
- goto err_mput;
+ goto err_out;
mutex_init(&bb->mutex);
file->private_data = bb;
sysfs_get(attr_sd);
return 0;
- err_mput:
- module_put(attr->attr.owner);
- err_sput:
+ err_out:
sysfs_put_active(attr_sd);
kfree(bb);
return error;
static int release(struct inode * inode, struct file * file)
{
struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
- struct bin_attribute *attr = attr_sd->s_elem.bin_attr.bin_attr;
struct bin_buffer *bb = file->private_data;
if (bb->mmapped)
sysfs_put_active_two(attr_sd);
sysfs_put(attr_sd);
- module_put(attr->attr.owner);
kfree(bb->buffer);
kfree(bb);
return 0;
static int sysfs_open_file(struct inode *inode, struct file *file)
{
struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
- struct attribute *attr = attr_sd->s_elem.attr.attr;
struct kobject *kobj = attr_sd->s_parent->s_elem.dir.kobj;
struct sysfs_buffer * buffer;
struct sysfs_ops * ops = NULL;
if (!sysfs_get_active_two(attr_sd))
return -ENODEV;
- /* Grab the module reference for this attribute */
- error = -ENODEV;
- if (!try_module_get(attr->owner))
- goto err_sput;
-
/* if the kobject has no ktype, then we assume that it is a subsystem
* itself, and use ops for it.
*/
* or the subsystem have no operations.
*/
if (!ops)
- goto err_mput;
+ goto err_out;
/* File needs write support.
* The inode's perms must say it's ok,
*/
if (file->f_mode & FMODE_WRITE) {
if (!(inode->i_mode & S_IWUGO) || !ops->store)
- goto err_mput;
+ goto err_out;
}
/* File needs read support.
*/
if (file->f_mode & FMODE_READ) {
if (!(inode->i_mode & S_IRUGO) || !ops->show)
- goto err_mput;
+ goto err_out;
}
/* No error? Great, allocate a buffer for the file, and store it
error = -ENOMEM;
buffer = kzalloc(sizeof(struct sysfs_buffer), GFP_KERNEL);
if (!buffer)
- goto err_mput;
+ goto err_out;
init_MUTEX(&buffer->sem);
buffer->needs_read_fill = 1;
sysfs_get(attr_sd);
return 0;
- err_mput:
- module_put(attr->owner);
- err_sput:
+ err_out:
sysfs_put_active_two(attr_sd);
return error;
}
static int sysfs_release(struct inode * inode, struct file * filp)
{
struct sysfs_dirent *attr_sd = filp->f_path.dentry->d_fsdata;
- struct attribute *attr = attr_sd->s_elem.attr.attr;
struct sysfs_buffer *buffer = filp->private_data;
sysfs_put(attr_sd);
- /* After this point, attr should not be accessed. */
- module_put(attr->owner);
if (buffer) {
if (buffer->page)
#define _SYSDEV_ATTR(_name,_mode,_show,_store) \
{ \
- .attr = { .name = __stringify(_name), .mode = _mode, \
- .owner = THIS_MODULE }, \
+ .attr = { .name = __stringify(_name), .mode = _mode }, \
.show = _show, \
.store = _store, \
}
struct nameidata;
struct dentry;
+/* FIXME
+ * The *owner field is no longer used, but leave around
+ * until the tree gets cleaned up fully.
+ */
struct attribute {
const char * name;
- struct module * owner;
+ struct module * owner;
mode_t mode;
};
*/
#define __ATTR(_name,_mode,_show,_store) { \
- .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE }, \
+ .attr = {.name = __stringify(_name), .mode = _mode }, \
.show = _show, \
.store = _store, \
}
#define __ATTR_RO(_name) { \
- .attr = { .name = __stringify(_name), .mode = 0444, .owner = THIS_MODULE }, \
- .show = _name##_show, \
+ .attr = { .name = __stringify(_name), .mode = 0444 }, \
+ .show = _name##_show, \
}
#define __ATTR_NULL { .attr = { .name = NULL } }
mod->field = NULL; \
} \
static struct module_attribute modinfo_##field = { \
- .attr = { .name = __stringify(field), .mode = 0444, \
- .owner = THIS_MODULE }, \
+ .attr = { .name = __stringify(field), .mode = 0444 }, \
.show = show_modinfo_##field, \
.setup = setup_modinfo_##field, \
.test = modinfo_##field##_exists, \
}
static struct module_attribute refcnt = {
- .attr = { .name = "refcnt", .mode = 0444, .owner = THIS_MODULE },
+ .attr = { .name = "refcnt", .mode = 0444 },
.show = show_refcnt,
};
}
static struct module_attribute initstate = {
- .attr = { .name = "initstate", .mode = 0444, .owner = THIS_MODULE },
+ .attr = { .name = "initstate", .mode = 0444 },
.show = show_initstate,
};
sattr->mattr.show = module_sect_show;
sattr->mattr.store = NULL;
sattr->mattr.attr.name = sattr->name;
- sattr->mattr.attr.owner = mod;
sattr->mattr.attr.mode = S_IRUGO;
*(gattr++) = &(sattr++)->mattr.attr;
}
if (!attr->test ||
(attr->test && attr->test(mod))) {
memcpy(temp_attr, attr, sizeof(*temp_attr));
- temp_attr->attr.owner = mod;
error = sysfs_create_file(&mod->mkobj.kobj,&temp_attr->attr);
++temp_attr;
}
pattr->mattr.show = param_attr_show;
pattr->mattr.store = param_attr_store;
pattr->mattr.attr.name = (char *)&kp->name[name_skip];
- pattr->mattr.attr.owner = mk->mod;
pattr->mattr.attr.mode = kp->perm;
*(gattr++) = &(pattr++)->mattr.attr;
}
static struct bin_attribute bridge_forward = {
.attr = { .name = SYSFS_BRIDGE_FDB,
- .mode = S_IRUGO,
- .owner = THIS_MODULE, },
+ .mode = S_IRUGO, },
.read = brforward_read,
};
#define BRPORT_ATTR(_name,_mode,_show,_store) \
struct brport_attribute brport_attr_##_name = { \
.attr = {.name = __stringify(_name), \
- .mode = _mode, \
- .owner = THIS_MODULE, }, \
+ .mode = _mode }, \
.show = _show, \
.store = _store, \
};