b43legacy: Convert to use of the new SPROM structure

The b43legacy driver is modified to use the new SPROM structure.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/b43legacy/leds.c b/drivers/net/wireless/b43legacy/leds.c
index b4319c99cf701831adbe9608ece493491b0fba8c..f0affb781002dc2d9cafb350e322ca022b5011d6 100644 (file)
--- a/drivers/net/wireless/b43legacy/leds.c
+++ b/drivers/net/wireless/b43legacy/leds.c
@@ -189,10 +189,10 @@ void b43legacy_leds_init(struct b43legacy_wldev *dev)
        enum b43legacy_led_behaviour behaviour;
        bool activelow;
 
-       sprom[0] = bus->sprom.r1.gpio0;
-       sprom[1] = bus->sprom.r1.gpio1;
-       sprom[2] = bus->sprom.r1.gpio2;
-       sprom[3] = bus->sprom.r1.gpio3;
+       sprom[0] = bus->sprom.gpio0;
+       sprom[1] = bus->sprom.gpio1;
+       sprom[2] = bus->sprom.gpio2;
+       sprom[3] = bus->sprom.gpio3;
 
        for (i = 0; i < 4; i++) {
                if (sprom[i] == 0xFF) {

diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index e545f79ac7478260287ff00b9ae4003448bc6d8f..1a8b67619077e1c00b2eaf5baac7f1db8229ef4f 100644 (file)
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -1745,7 +1745,7 @@ static int b43legacy_gpio_init(struct b43legacy_wldev *dev)
                mask |= 0x0060;
                set |= 0x0060;
        }
-       if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_PACTRL) {
+       if (dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_PACTRL) {
                b43legacy_write16(dev, B43legacy_MMIO_GPIO_MASK,
                                  b43legacy_read16(dev,
                                  B43legacy_MMIO_GPIO_MASK)
@@ -2122,7 +2122,7 @@ static void b43legacy_periodic_every120sec(struct b43legacy_wldev *dev)
 static void b43legacy_periodic_every60sec(struct b43legacy_wldev *dev)
 {
        b43legacy_phy_lo_mark_all_unused(dev);
-       if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_RSSI) {
+       if (dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_RSSI) {
                b43legacy_mac_suspend(dev);
                b43legacy_calc_nrssi_slope(dev);
                b43legacy_mac_enable(dev);
@@ -3064,7 +3064,7 @@ static int b43legacy_wireless_core_init(struct b43legacy_wldev *dev)
                hf |= B43legacy_HF_SYMW;
                if (phy->rev == 1)
                        hf |= B43legacy_HF_GDCW;
-               if (sprom->r1.boardflags_lo & B43legacy_BFL_PACTRL)
+               if (sprom->boardflags_lo & B43legacy_BFL_PACTRL)
                        hf |= B43legacy_HF_OFDMPABOOST;
        } else if (phy->type == B43legacy_PHYTYPE_B) {
                hf |= B43legacy_HF_SYMW;
@@ -3556,12 +3556,12 @@ static void b43legacy_sprom_fixup(struct ssb_bus *bus)
        if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
            bus->boardinfo.type == 0x4E &&
            bus->boardinfo.rev > 0x40)
-               bus->sprom.r1.boardflags_lo |= B43legacy_BFL_PACTRL;
+               bus->sprom.boardflags_lo |= B43legacy_BFL_PACTRL;
 
        /* Convert Antennagain values to Q5.2 */
-       if (bus->sprom.r1.antenna_gain_bg == 0xFF)
-               bus->sprom.r1.antenna_gain_bg = 2; /* if unset, use 2 dBm */
-       bus->sprom.r1.antenna_gain_bg <<= 2;
+       if (bus->sprom.antenna_gain_bg == 0xFF)
+               bus->sprom.antenna_gain_bg = 2; /* if unset, use 2 dBm */
+       bus->sprom.antenna_gain_bg <<= 2;
 }
 
 static void b43legacy_wireless_exit(struct ssb_device *dev,
@@ -3596,10 +3596,10 @@ static int b43legacy_wireless_init(struct ssb_device *dev)
        hw->max_noise = -110;
        hw->queues = 1; /* FIXME: hardware has more queues */
        SET_IEEE80211_DEV(hw, dev->dev);
-       if (is_valid_ether_addr(sprom->r1.et1mac))
-               SET_IEEE80211_PERM_ADDR(hw, sprom->r1.et1mac);
+       if (is_valid_ether_addr(sprom->et1mac))
+               SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
        else
-               SET_IEEE80211_PERM_ADDR(hw, sprom->r1.il0mac);
+               SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
 
        /* Get and initialize struct b43legacy_wl */
        wl = hw_to_b43legacy_wl(hw);

diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c
index d121fae53aa095959ca2e5113c80b9865b9469a4..9d527e6d6ced84be4c42fa750d292e58a03f071b 100644 (file)
--- a/drivers/net/wireless/b43legacy/phy.c
+++ b/drivers/net/wireless/b43legacy/phy.c
@@ -441,7 +441,7 @@ static void b43legacy_phy_inita(struct b43legacy_wldev *dev)
        might_sleep();
 
        b43legacy_phy_setupg(dev);
-       if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_PACTRL)
+       if (dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_PACTRL)
                b43legacy_phy_write(dev, 0x046E, 0x03CF);
 }
 
@@ -543,7 +543,7 @@ static void b43legacy_phy_initb4(struct b43legacy_wldev *dev)
        if (phy->radio_ver == 0x2050)
                b43legacy_phy_write(dev, 0x002A, 0x88C2);
        b43legacy_radio_set_txpower_bg(dev, 0xFFFF, 0xFFFF, 0xFFFF);
-       if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_RSSI) {
+       if (dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_RSSI) {
                b43legacy_calc_nrssi_slope(dev);
                b43legacy_calc_nrssi_threshold(dev);
        }
@@ -699,7 +699,7 @@ static void b43legacy_phy_initb6(struct b43legacy_wldev *dev)
                b43legacy_radio_write16(dev, 0x005A, 0x0088);
                b43legacy_radio_write16(dev, 0x005B, 0x006B);
                b43legacy_radio_write16(dev, 0x005C, 0x000F);
-               if (dev->dev->bus->sprom.r1.boardflags_lo & 0x8000) {
+               if (dev->dev->bus->sprom.boardflags_lo & 0x8000) {
                        b43legacy_radio_write16(dev, 0x005D, 0x00FA);
                        b43legacy_radio_write16(dev, 0x005E, 0x00D8);
                } else {
@@ -797,7 +797,7 @@ static void b43legacy_phy_initb6(struct b43legacy_wldev *dev)
                b43legacy_phy_write(dev, 0x0062, 0x0007);
                b43legacy_radio_init2050(dev);
                b43legacy_phy_lo_g_measure(dev);
-               if (dev->dev->bus->sprom.r1.boardflags_lo &
+               if (dev->dev->bus->sprom.boardflags_lo &
                    B43legacy_BFL_RSSI) {
                        b43legacy_calc_nrssi_slope(dev);
                        b43legacy_calc_nrssi_threshold(dev);
@@ -921,7 +921,7 @@ static void b43legacy_calc_loopback_gain(struct b43legacy_wldev *dev)
                            b43legacy_phy_read(dev, 0x0811) | 0x0100);
        b43legacy_phy_write(dev, 0x0812,
                            b43legacy_phy_read(dev, 0x0812) & 0xCFFF);
-       if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_EXTLNA) {
+       if (dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_EXTLNA) {
                if (phy->rev >= 7) {
                        b43legacy_phy_write(dev, 0x0811,
                                            b43legacy_phy_read(dev, 0x0811)
@@ -1072,7 +1072,7 @@ static void b43legacy_phy_initg(struct b43legacy_wldev *dev)
                        b43legacy_phy_write(dev, 0x0036,
                                            (b43legacy_phy_read(dev, 0x0036)
                                             & 0x0FFF) | (phy->txctl2 << 12));
-               if (dev->dev->bus->sprom.r1.boardflags_lo &
+               if (dev->dev->bus->sprom.boardflags_lo &
                    B43legacy_BFL_PACTRL)
                        b43legacy_phy_write(dev, 0x002E, 0x8075);
                else
@@ -1087,7 +1087,7 @@ static void b43legacy_phy_initg(struct b43legacy_wldev *dev)
                b43legacy_phy_write(dev, 0x080F, 0x8078);
        }
 
-       if (!(dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_RSSI)) {
+       if (!(dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_RSSI)) {
                /* The specs state to update the NRSSI LT with
                 * the value 0x7FFFFFFF here. I think that is some weird
                 * compiler optimization in the original driver.
@@ -1838,9 +1838,9 @@ void b43legacy_phy_xmitpower(struct b43legacy_wldev *dev)
 
        estimated_pwr = b43legacy_phy_estimate_power_out(dev, average);
 
-       max_pwr = dev->dev->bus->sprom.r1.maxpwr_bg;
+       max_pwr = dev->dev->bus->sprom.maxpwr_bg;
 
-       if ((dev->dev->bus->sprom.r1.boardflags_lo
+       if ((dev->dev->bus->sprom.boardflags_lo
             & B43legacy_BFL_PACTRL) &&
            (phy->type == B43legacy_PHYTYPE_G))
                max_pwr -= 0x3;
@@ -1848,7 +1848,7 @@ void b43legacy_phy_xmitpower(struct b43legacy_wldev *dev)
                b43legacywarn(dev->wl, "Invalid max-TX-power value in SPROM."
                        "\n");
                max_pwr = 74; /* fake it */
-               dev->dev->bus->sprom.r1.maxpwr_bg = max_pwr;
+               dev->dev->bus->sprom.maxpwr_bg = max_pwr;
        }
 
        /* Use regulatory information to get the maximum power.
@@ -1858,7 +1858,8 @@ void b43legacy_phy_xmitpower(struct b43legacy_wldev *dev)
         * and 1.5 dBm (a safety factor??). The result is in Q5.2 format
         * which accounts for the factor of 4 */
 #define REG_MAX_PWR 20
-       max_pwr = min(REG_MAX_PWR * 4 - dev->dev->bus->sprom.r1.antenna_gain_bg
+       max_pwr = min(REG_MAX_PWR * 4
+                     - dev->dev->bus->sprom.antenna_gain_bg
                      - 0x6, max_pwr);
 
        /* find the desired power in Q5.2 - power_level is in dBm
@@ -1918,7 +1919,7 @@ void b43legacy_phy_xmitpower(struct b43legacy_wldev *dev)
                                txpower = 3;
                                radio_attenuation += 2;
                                baseband_attenuation += 2;
-                       } else if (dev->dev->bus->sprom.r1.boardflags_lo
+                       } else if (dev->dev->bus->sprom.boardflags_lo
                                   & B43legacy_BFL_PACTRL) {
                                baseband_attenuation += 4 *
                                                     (radio_attenuation - 2);
@@ -2000,9 +2001,9 @@ int b43legacy_phy_init_tssi2dbm_table(struct b43legacy_wldev *dev)
 
        B43legacy_WARN_ON(!(phy->type == B43legacy_PHYTYPE_B ||
                          phy->type == B43legacy_PHYTYPE_G));
-       pab0 = (s16)(dev->dev->bus->sprom.r1.pa0b0);
-       pab1 = (s16)(dev->dev->bus->sprom.r1.pa0b1);
-       pab2 = (s16)(dev->dev->bus->sprom.r1.pa0b2);
+       pab0 = (s16)(dev->dev->bus->sprom.pa0b0);
+       pab1 = (s16)(dev->dev->bus->sprom.pa0b1);
+       pab2 = (s16)(dev->dev->bus->sprom.pa0b2);
 
        if ((dev->dev->bus->chip_id == 0x4301) && (phy->radio_ver != 0x2050)) {
                phy->idle_tssi = 0x34;
@@ -2013,9 +2014,10 @@ int b43legacy_phy_init_tssi2dbm_table(struct b43legacy_wldev *dev)
        if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
            pab0 != -1 && pab1 != -1 && pab2 != -1) {
                /* The pabX values are set in SPROM. Use them. */
-               if ((s8)dev->dev->bus->sprom.r1.itssi_bg != 0 &&
-                   (s8)dev->dev->bus->sprom.r1.itssi_bg != -1)
-                       phy->idle_tssi = (s8)(dev->dev->bus->sprom.r1.itssi_bg);
+               if ((s8)dev->dev->bus->sprom.itssi_bg != 0 &&
+                   (s8)dev->dev->bus->sprom.itssi_bg != -1)
+                       phy->idle_tssi = (s8)(dev->dev->bus->sprom.
+                                         itssi_bg);
                else
                        phy->idle_tssi = 62;
                dyn_tssi2dbm = kmalloc(64, GFP_KERNEL);

diff --git a/drivers/net/wireless/b43legacy/radio.c b/drivers/net/wireless/b43legacy/radio.c
index ccdb6fc8932bdb29ce728bc7c0f0b2ea9080871c..1a72eb0f8f661e06770788da9024dcb5a0314d86 100644 (file)
--- a/drivers/net/wireless/b43legacy/radio.c
+++ b/drivers/net/wireless/b43legacy/radio.c
@@ -827,7 +827,7 @@ void b43legacy_calc_nrssi_threshold(struct b43legacy_wldev *dev)
        case B43legacy_PHYTYPE_B: {
                if (phy->radio_ver != 0x2050)
                        return;
-               if (!(dev->dev->bus->sprom.r1.boardflags_lo &
+               if (!(dev->dev->bus->sprom.boardflags_lo &
                    B43legacy_BFL_RSSI))
                        return;
 
@@ -857,7 +857,7 @@ void b43legacy_calc_nrssi_threshold(struct b43legacy_wldev *dev)
        }
        case B43legacy_PHYTYPE_G:
                if (!phy->gmode ||
-                   !(dev->dev->bus->sprom.r1.boardflags_lo &
+                   !(dev->dev->bus->sprom.boardflags_lo &
                    B43legacy_BFL_RSSI)) {
                        tmp16 = b43legacy_nrssi_hw_read(dev, 0x20);
                        if (tmp16 >= 0x20)
@@ -1406,7 +1406,7 @@ static u16 b43legacy_get_812_value(struct b43legacy_wldev *dev, u8 lpd)
        if (!phy->gmode)
                return 0;
        if (!has_loopback_gain(phy)) {
-               if (phy->rev < 7 || !(dev->dev->bus->sprom.r1.boardflags_lo
+               if (phy->rev < 7 || !(dev->dev->bus->sprom.boardflags_lo
                    & B43legacy_BFL_EXTLNA)) {
                        switch (lpd) {
                        case LPD(0, 1, 1):
@@ -1459,7 +1459,7 @@ static u16 b43legacy_get_812_value(struct b43legacy_wldev *dev, u8 lpd)
                }
 
                loop_or = (loop << 8) | extern_lna_control;
-               if (phy->rev >= 7 && dev->dev->bus->sprom.r1.boardflags_lo
+               if (phy->rev >= 7 && dev->dev->bus->sprom.boardflags_lo
                    & B43legacy_BFL_EXTLNA) {
                        if (extern_lna_control)
                                loop_or |= 0x8000;
@@ -1550,7 +1550,7 @@ u16 b43legacy_radio_init2050(struct b43legacy_wldev *dev)
                                            b43legacy_get_812_value(dev,
                                            LPD(0, 1, 1)));
                        if (phy->rev < 7 ||
-                           !(dev->dev->bus->sprom.r1.boardflags_lo
+                           !(dev->dev->bus->sprom.boardflags_lo
                            & B43legacy_BFL_EXTLNA))
                                b43legacy_phy_write(dev, 0x0811, 0x01B3);
                        else
@@ -1786,7 +1786,7 @@ int b43legacy_radio_selectchannel(struct b43legacy_wldev *dev,
                          channel2freq_bg(channel));
 
        if (channel == 14) {
-               if (dev->dev->bus->sprom.r1.country_code == 5)   /* JAPAN) */
+               if (dev->dev->bus->sprom.country_code == 5)   /* JAPAN) */
                        b43legacy_shm_write32(dev, B43legacy_SHM_SHARED,
                                              B43legacy_UCODEFLAGS_OFFSET,
                                              b43legacy_shm_read32(dev,

diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index 23496f45a4d7326f2854d8312b22779fe733f1e9..c24399dc0ede4014ecf8d05dde281aadb03d44d5 100644 (file)
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -379,7 +379,7 @@ static s8 b43legacy_rssi_postprocess(struct b43legacy_wldev *dev,
                        else
                                tmp -= 3;
                } else {
-                       if (dev->dev->bus->sprom.r1.boardflags_lo
+                       if (dev->dev->bus->sprom.boardflags_lo
                            & B43legacy_BFL_RSSI) {
                                if (in_rssi > 63)
                                        in_rssi = 63;