]> err.no Git - linux-2.6/commitdiff
[SCSI] stex: change wait loop code
authorEd Lin <ed.lin@promise.com>
Tue, 5 Dec 2006 01:49:42 +0000 (17:49 -0800)
committerJames Bottomley <jejb@mulgrave.il.steeleye.com>
Tue, 5 Dec 2006 17:33:38 +0000 (11:33 -0600)
The original wait loop may be much longer than intended time.
Use more accurate timer_after for it. Also adjust wait value to
avoid unnecessary long waiting.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
drivers/scsi/stex.c

index bfd7983045b7208d50d36ff847c6febc0ccdb618..7edbcc9bc9d693853b3fad6310a0300df0de890f 100644 (file)
@@ -76,9 +76,10 @@ enum {
        MU_STATE_STARTED                        = 4,
        MU_STATE_RESETTING                      = 5,
 
-       MU_MAX_DELAY_TIME                       = 240000,
+       MU_MAX_DELAY                            = 120,
        MU_HANDSHAKE_SIGNATURE                  = 0x55aaaa55,
        MU_HANDSHAKE_SIGNATURE_HALF             = 0x5a5a0000,
+       MU_HARD_RESET_WAIT                      = 30000,
        HMU_PARTNER_TYPE                        = 2,
 
        /* firmware returned values */
@@ -910,23 +911,22 @@ static int stex_handshake(struct st_hba *hba)
        struct handshake_frame *h;
        dma_addr_t status_phys;
        u32 data;
-       int i;
+       unsigned long before;
 
        if (readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE) {
                writel(MU_INBOUND_DOORBELL_HANDSHAKE, base + IDBL);
                readl(base + IDBL);
-               for (i = 0; readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE
-                       && i < MU_MAX_DELAY_TIME; i++) {
+               before = jiffies;
+               while (readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE) {
+                       if (time_after(jiffies, before + MU_MAX_DELAY * HZ)) {
+                               printk(KERN_ERR DRV_NAME
+                                       "(%s): no handshake signature\n",
+                                       pci_name(hba->pdev));
+                               return -1;
+                       }
                        rmb();
                        msleep(1);
                }
-
-               if (i == MU_MAX_DELAY_TIME) {
-                       printk(KERN_ERR DRV_NAME
-                               "(%s): no handshake signature\n",
-                               pci_name(hba->pdev));
-                       return -1;
-               }
        }
 
        udelay(10);
@@ -965,19 +965,18 @@ static int stex_handshake(struct st_hba *hba)
        readl(base + IDBL); /* flush */
 
        udelay(10);
-       for (i = 0; readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE
-               && i < MU_MAX_DELAY_TIME; i++) {
+       before = jiffies;
+       while (readl(base + OMR0) != MU_HANDSHAKE_SIGNATURE) {
+               if (time_after(jiffies, before + MU_MAX_DELAY * HZ)) {
+                       printk(KERN_ERR DRV_NAME
+                               "(%s): no signature after handshake frame\n",
+                               pci_name(hba->pdev));
+                       return -1;
+               }
                rmb();
                msleep(1);
        }
 
-       if (i == MU_MAX_DELAY_TIME) {
-               printk(KERN_ERR DRV_NAME
-                       "(%s): no signature after handshake frame\n",
-                       pci_name(hba->pdev));
-               return -1;
-       }
-
        writel(0, base + IMR0);
        readl(base + IMR0);
        writel(0, base + OMR0);
@@ -1059,7 +1058,7 @@ static void stex_hard_reset(struct st_hba *hba)
        pci_bctl &= ~PCI_BRIDGE_CTL_BUS_RESET;
        pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, pci_bctl);
 
-       for (i = 0; i < MU_MAX_DELAY_TIME; i++) {
+       for (i = 0; i < MU_HARD_RESET_WAIT; i++) {
                pci_read_config_word(hba->pdev, PCI_COMMAND, &pci_cmd);
                if (pci_cmd != 0xffff && (pci_cmd & PCI_COMMAND_MASTER))
                        break;