--- /dev/null
+/*
+ * m52790 i2c ivtv driver.
+ * Copyright (C) 2007 Hans Verkuil
+ *
+ * A/V source switching Mitsubishi M52790SP/FP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <asm/uaccess.h>
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/videodev.h>
+#include <media/m52790.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-i2c-drv-legacy.h>
+
+MODULE_DESCRIPTION("i2c device driver for m52790 A/V switch");
+MODULE_AUTHOR("Hans Verkuil");
+MODULE_LICENSE("GPL");
+
+static unsigned short normal_i2c[] = { 0x90 >> 1, I2C_CLIENT_END };
+
+
+I2C_CLIENT_INSMOD;
+
+struct m52790_state {
+ u16 input;
+ u16 output;
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int m52790_write(struct i2c_client *client)
+{
+ struct m52790_state *state = i2c_get_clientdata(client);
+ u8 sw1 = (state->input | state->output) & 0xff;
+ u8 sw2 = (state->input | state->output) >> 8;
+
+ return i2c_smbus_write_byte_data(client, sw1, sw2);
+}
+
+static int m52790_command(struct i2c_client *client, unsigned int cmd,
+ void *arg)
+{
+ struct m52790_state *state = i2c_get_clientdata(client);
+ struct v4l2_routing *route = arg;
+
+ /* Note: audio and video are linked and cannot be switched separately.
+ So audio and video routing commands are identical for this chip.
+ In theory the video amplifier and audio modes could be handled
+ separately for the output, but that seems to be overkill right now.
+ The same holds for implementing an audio mute control, this is now
+ part of the audio output routing. The normal case is that another
+ chip takes care of the actual muting so making it part of the
+ output routing seems to be the right thing to do for now. */
+ switch (cmd) {
+ case VIDIOC_INT_G_AUDIO_ROUTING:
+ case VIDIOC_INT_G_VIDEO_ROUTING:
+ route->input = state->input;
+ route->output = state->output;
+ break;
+
+ case VIDIOC_INT_S_AUDIO_ROUTING:
+ case VIDIOC_INT_S_VIDEO_ROUTING:
+ state->input = route->input;
+ state->output = route->output;
+ m52790_write(client);
+ break;
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ case VIDIOC_DBG_G_REGISTER:
+ case VIDIOC_DBG_S_REGISTER:
+ {
+ struct v4l2_register *reg = arg;
+
+ if (!v4l2_chip_match_i2c_client(client,
+ reg->match_type, reg->match_chip))
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (reg->reg != 0)
+ return -EINVAL;
+ if (cmd == VIDIOC_DBG_G_REGISTER)
+ reg->val = state->input | state->output;
+ else {
+ state->input = reg->val & 0x0303;
+ state->output = reg->val & ~0x0303;
+ m52790_write(client);
+ }
+ break;
+ }
+#endif
+
+ case VIDIOC_G_CHIP_IDENT:
+ return v4l2_chip_ident_i2c_client(client, arg,
+ V4L2_IDENT_M52790, 0);
+
+ case VIDIOC_LOG_STATUS:
+ v4l_info(client, "Switch 1: %02x\n",
+ (state->input | state->output) & 0xff);
+ v4l_info(client, "Switch 2: %02x\n",
+ (state->input | state->output) >> 8);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+/* i2c implementation */
+
+static int m52790_probe(struct i2c_client *client)
+{
+ struct m52790_state *state;
+
+ /* Check if the adapter supports the needed features */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EIO;
+
+ snprintf(client->name, sizeof(client->name) - 1, "m52790");
+
+ v4l_info(client, "chip found @ 0x%x (%s)\n",
+ client->addr << 1, client->adapter->name);
+
+ state = kmalloc(sizeof(struct m52790_state), GFP_KERNEL);
+ if (state == NULL)
+ return -ENOMEM;
+
+ state->input = M52790_IN_TUNER;
+ state->output = M52790_OUT_STEREO;
+ i2c_set_clientdata(client, state);
+ m52790_write(client);
+ return 0;
+}
+
+static int m52790_remove(struct i2c_client *client)
+{
+ kfree(i2c_get_clientdata(client));
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+ .name = "m52790",
+ .driverid = I2C_DRIVERID_M52790,
+ .command = m52790_command,
+ .probe = m52790_probe,
+ .remove = m52790_remove,
+};
+
--- /dev/null
+/*
+ m52790.h - definition for m52790 inputs and outputs
+
+ Copyright (C) 2007 Hans Verkuil (hverkuil@xs4all.nl)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _M52790_H_
+#define _M52790_H_
+
+/* Input routing switch 1 */
+
+#define M52790_SW1_IN_MASK 0x0003
+#define M52790_SW1_IN_TUNER 0x0000
+#define M52790_SW1_IN_V2 0x0001
+#define M52790_SW1_IN_V3 0x0002
+#define M52790_SW1_IN_V4 0x0003
+
+/* Selects component input instead of composite */
+#define M52790_SW1_YCMIX 0x0004
+
+
+/* Input routing switch 2 */
+
+#define M52790_SW2_IN_MASK 0x0300
+#define M52790_SW2_IN_TUNER 0x0000
+#define M52790_SW2_IN_V2 0x0100
+#define M52790_SW2_IN_V3 0x0200
+#define M52790_SW2_IN_V4 0x0300
+
+/* Selects component input instead of composite */
+#define M52790_SW2_YCMIX 0x0400
+
+
+/* Output routing switch 1 */
+
+/* Enable 6dB amplifier for composite out */
+#define M52790_SW1_V_AMP 0x0008
+
+/* Enable 6dB amplifier for component out */
+#define M52790_SW1_YC_AMP 0x0010
+
+/* Audio output mode */
+#define M52790_SW1_AUDIO_MASK 0x00c0
+#define M52790_SW1_AUDIO_MUTE 0x0000
+#define M52790_SW1_AUDIO_R 0x0040
+#define M52790_SW1_AUDIO_L 0x0080
+#define M52790_SW1_AUDIO_STEREO 0x00c0
+
+
+/* Output routing switch 2 */
+
+/* Enable 6dB amplifier for composite out */
+#define M52790_SW2_V_AMP 0x0800
+
+/* Enable 6dB amplifier for component out */
+#define M52790_SW2_YC_AMP 0x1000
+
+/* Audio output mode */
+#define M52790_SW2_AUDIO_MASK 0xc000
+#define M52790_SW2_AUDIO_MUTE 0x0000
+#define M52790_SW2_AUDIO_R 0x4000
+#define M52790_SW2_AUDIO_L 0x8000
+#define M52790_SW2_AUDIO_STEREO 0xc000
+
+
+/* Common values */
+#define M52790_IN_TUNER (M52790_SW1_IN_TUNER | M52790_SW2_IN_TUNER)
+#define M52790_IN_V2 (M52790_SW1_IN_V2 | M52790_SW2_IN_V2)
+#define M52790_IN_V3 (M52790_SW1_IN_V3 | M52790_SW2_IN_V3)
+#define M52790_IN_V4 (M52790_SW1_IN_V4 | M52790_SW2_IN_V4)
+
+#define M52790_OUT_STEREO (M52790_SW1_AUDIO_STEREO | \
+ M52790_SW2_AUDIO_STEREO)
+#define M52790_OUT_AMP_STEREO (M52790_SW1_AUDIO_STEREO | \
+ M52790_SW1_V_AMP | \
+ M52790_SW2_AUDIO_STEREO | \
+ M52790_SW2_V_AMP)
+
+#endif
projects / linux-2.6 / commitdiff