This patch adds nommu version start-up code head-nommu.S.
The common part of the start-up codes is moved to head-common.S.
Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
CHECKFLAGS += -D__arm__
#Default value
-head-y := arch/arm/kernel/head.o arch/arm/kernel/init_task.o
+head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
textofs-y := 0x00008000
machine-$(CONFIG_ARCH_RPC) := rpc
--- /dev/null
+/*
+ * linux/arch/arm/kernel/head-common.S
+ *
+ * Copyright (C) 1994-2002 Russell King
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ .type __switch_data, %object
+__switch_data:
+ .long __mmap_switched
+ .long __data_loc @ r4
+ .long __data_start @ r5
+ .long __bss_start @ r6
+ .long _end @ r7
+ .long processor_id @ r4
+ .long __machine_arch_type @ r5
+ .long cr_alignment @ r6
+ .long init_thread_union + THREAD_START_SP @ sp
+
+/*
+ * The following fragment of code is executed with the MMU on in MMU mode,
+ * and uses absolute addresses; this is not position independent.
+ *
+ * r0 = cp#15 control register
+ * r1 = machine ID
+ * r9 = processor ID
+ */
+ .type __mmap_switched, %function
+__mmap_switched:
+ adr r3, __switch_data + 4
+
+ ldmia r3!, {r4, r5, r6, r7}
+ cmp r4, r5 @ Copy data segment if needed
+1: cmpne r5, r6
+ ldrne fp, [r4], #4
+ strne fp, [r5], #4
+ bne 1b
+
+ mov fp, #0 @ Clear BSS (and zero fp)
+1: cmp r6, r7
+ strcc fp, [r6],#4
+ bcc 1b
+
+ ldmia r3, {r4, r5, r6, sp}
+ str r9, [r4] @ Save processor ID
+ str r1, [r5] @ Save machine type
+ bic r4, r0, #CR_A @ Clear 'A' bit
+ stmia r6, {r0, r4} @ Save control register values
+ b start_kernel
+
+/*
+ * Exception handling. Something went wrong and we can't proceed. We
+ * ought to tell the user, but since we don't have any guarantee that
+ * we're even running on the right architecture, we do virtually nothing.
+ *
+ * If CONFIG_DEBUG_LL is set we try to print out something about the error
+ * and hope for the best (useful if bootloader fails to pass a proper
+ * machine ID for example).
+ */
+
+ .type __error_p, %function
+__error_p:
+#ifdef CONFIG_DEBUG_LL
+ adr r0, str_p1
+ bl printascii
+ b __error
+str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n"
+ .align
+#endif
+
+ .type __error_a, %function
+__error_a:
+#ifdef CONFIG_DEBUG_LL
+ mov r4, r1 @ preserve machine ID
+ adr r0, str_a1
+ bl printascii
+ mov r0, r4
+ bl printhex8
+ adr r0, str_a2
+ bl printascii
+ adr r3, 3f
+ ldmia r3, {r4, r5, r6} @ get machine desc list
+ sub r4, r3, r4 @ get offset between virt&phys
+ add r5, r5, r4 @ convert virt addresses to
+ add r6, r6, r4 @ physical address space
+1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type
+ bl printhex8
+ mov r0, #'\t'
+ bl printch
+ ldr r0, [r5, #MACHINFO_NAME] @ get machine name
+ add r0, r0, r4
+ bl printascii
+ mov r0, #'\n'
+ bl printch
+ add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
+ cmp r5, r6
+ blo 1b
+ adr r0, str_a3
+ bl printascii
+ b __error
+str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x"
+str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
+str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n"
+ .align
+#endif
+
+ .type __error, %function
+__error:
+#ifdef CONFIG_ARCH_RPC
+/*
+ * Turn the screen red on a error - RiscPC only.
+ */
+ mov r0, #0x02000000
+ mov r3, #0x11
+ orr r3, r3, r3, lsl #8
+ orr r3, r3, r3, lsl #16
+ str r3, [r0], #4
+ str r3, [r0], #4
+ str r3, [r0], #4
+ str r3, [r0], #4
+#endif
+1: mov r0, r0
+ b 1b
+
+
+/*
+ * Read processor ID register (CP#15, CR0), and look up in the linker-built
+ * supported processor list. Note that we can't use the absolute addresses
+ * for the __proc_info lists since we aren't running with the MMU on
+ * (and therefore, we are not in the correct address space). We have to
+ * calculate the offset.
+ *
+ * r9 = cpuid
+ * Returns:
+ * r3, r4, r6 corrupted
+ * r5 = proc_info pointer in physical address space
+ * r9 = cpuid (preserved)
+ */
+ .type __lookup_processor_type, %function
+__lookup_processor_type:
+ adr r3, 3f
+ ldmda r3, {r5 - r7}
+ sub r3, r3, r7 @ get offset between virt&phys
+ add r5, r5, r3 @ convert virt addresses to
+ add r6, r6, r3 @ physical address space
+1: ldmia r5, {r3, r4} @ value, mask
+ and r4, r4, r9 @ mask wanted bits
+ teq r3, r4
+ beq 2f
+ add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list)
+ cmp r5, r6
+ blo 1b
+ mov r5, #0 @ unknown processor
+2: mov pc, lr
+
+/*
+ * This provides a C-API version of the above function.
+ */
+ENTRY(lookup_processor_type)
+ stmfd sp!, {r4 - r7, r9, lr}
+ mov r9, r0
+ bl __lookup_processor_type
+ mov r0, r5
+ ldmfd sp!, {r4 - r7, r9, pc}
+
+/*
+ * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
+ * more information about the __proc_info and __arch_info structures.
+ */
+ .long __proc_info_begin
+ .long __proc_info_end
+3: .long .
+ .long __arch_info_begin
+ .long __arch_info_end
+
+/*
+ * Lookup machine architecture in the linker-build list of architectures.
+ * Note that we can't use the absolute addresses for the __arch_info
+ * lists since we aren't running with the MMU on (and therefore, we are
+ * not in the correct address space). We have to calculate the offset.
+ *
+ * r1 = machine architecture number
+ * Returns:
+ * r3, r4, r6 corrupted
+ * r5 = mach_info pointer in physical address space
+ */
+ .type __lookup_machine_type, %function
+__lookup_machine_type:
+ adr r3, 3b
+ ldmia r3, {r4, r5, r6}
+ sub r3, r3, r4 @ get offset between virt&phys
+ add r5, r5, r3 @ convert virt addresses to
+ add r6, r6, r3 @ physical address space
+1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type
+ teq r3, r1 @ matches loader number?
+ beq 2f @ found
+ add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
+ cmp r5, r6
+ blo 1b
+ mov r5, #0 @ unknown machine
+2: mov pc, lr
+
+/*
+ * This provides a C-API version of the above function.
+ */
+ENTRY(lookup_machine_type)
+ stmfd sp!, {r4 - r6, lr}
+ mov r1, r0
+ bl __lookup_machine_type
+ mov r0, r5
+ ldmfd sp!, {r4 - r6, pc}
--- /dev/null
+/*
+ * linux/arch/arm/kernel/head-nommu.S
+ *
+ * Copyright (C) 1994-2002 Russell King
+ * Copyright (C) 2003-2006 Hyok S. Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common kernel startup code (non-paged MM)
+ * for 32-bit CPUs which has a process ID register(CP15).
+ *
+ */
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/assembler.h>
+#include <asm/mach-types.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+#include <asm/constants.h>
+#include <asm/system.h>
+
+#define PROCINFO_INITFUNC 12
+
+/*
+ * Kernel startup entry point.
+ * ---------------------------
+ *
+ * This is normally called from the decompressor code. The requirements
+ * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
+ * r1 = machine nr.
+ *
+ * See linux/arch/arm/tools/mach-types for the complete list of machine
+ * numbers for r1.
+ *
+ */
+ __INIT
+ .type stext, %function
+ENTRY(stext)
+ msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode
+ @ and irqs disabled
+ mrc p15, 0, r9, c0, c0 @ get processor id
+ bl __lookup_processor_type @ r5=procinfo r9=cpuid
+ movs r10, r5 @ invalid processor (r5=0)?
+ beq __error_p @ yes, error 'p'
+ bl __lookup_machine_type @ r5=machinfo
+ movs r8, r5 @ invalid machine (r5=0)?
+ beq __error_a @ yes, error 'a'
+
+ ldr r13, __switch_data @ address to jump to after
+ @ the initialization is done
+ adr lr, __after_proc_init @ return (PIC) address
+ add pc, r10, #PROCINFO_INITFUNC
+
+/*
+ * Set the Control Register and Read the process ID.
+ */
+ .type __after_proc_init, %function
+__after_proc_init:
+ mrc p15, 0, r0, c1, c0, 0 @ read control reg
+#ifdef CONFIG_ALIGNMENT_TRAP
+ orr r0, r0, #CR_A
+#else
+ bic r0, r0, #CR_A
+#endif
+#ifdef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #CR_C
+#endif
+#ifdef CONFIG_CPU_BPREDICT_DISABLE
+ bic r0, r0, #CR_Z
+#endif
+#ifdef CONFIG_CPU_ICACHE_DISABLE
+ bic r0, r0, #CR_I
+#endif
+ mcr p15, 0, r0, c1, c0, 0 @ write control reg
+
+ mov pc, r13 @ clear the BSS and jump
+ @ to start_kernel
+
+#include "head-common.S"
adr lr, __enable_mmu @ return (PIC) address
add pc, r10, #PROCINFO_INITFUNC
- .type __switch_data, %object
-__switch_data:
- .long __mmap_switched
- .long __data_loc @ r4
- .long __data_start @ r5
- .long __bss_start @ r6
- .long _end @ r7
- .long processor_id @ r4
- .long __machine_arch_type @ r5
- .long cr_alignment @ r6
- .long init_thread_union + THREAD_START_SP @ sp
-
-/*
- * The following fragment of code is executed with the MMU on, and uses
- * absolute addresses; this is not position independent.
- *
- * r0 = cp#15 control register
- * r1 = machine ID
- * r9 = processor ID
- */
- .type __mmap_switched, %function
-__mmap_switched:
- adr r3, __switch_data + 4
-
- ldmia r3!, {r4, r5, r6, r7}
- cmp r4, r5 @ Copy data segment if needed
-1: cmpne r5, r6
- ldrne fp, [r4], #4
- strne fp, [r5], #4
- bne 1b
-
- mov fp, #0 @ Clear BSS (and zero fp)
-1: cmp r6, r7
- strcc fp, [r6],#4
- bcc 1b
-
- ldmia r3, {r4, r5, r6, sp}
- str r9, [r4] @ Save processor ID
- str r1, [r5] @ Save machine type
- bic r4, r0, #CR_A @ Clear 'A' bit
- stmia r6, {r0, r4} @ Save control register values
- b start_kernel
-
#if defined(CONFIG_SMP)
.type secondary_startup, #function
ENTRY(secondary_startup)
mov pc, lr
.ltorg
-
-
-/*
- * Exception handling. Something went wrong and we can't proceed. We
- * ought to tell the user, but since we don't have any guarantee that
- * we're even running on the right architecture, we do virtually nothing.
- *
- * If CONFIG_DEBUG_LL is set we try to print out something about the error
- * and hope for the best (useful if bootloader fails to pass a proper
- * machine ID for example).
- */
-
- .type __error_p, %function
-__error_p:
-#ifdef CONFIG_DEBUG_LL
- adr r0, str_p1
- bl printascii
- b __error
-str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n"
- .align
-#endif
-
- .type __error_a, %function
-__error_a:
-#ifdef CONFIG_DEBUG_LL
- mov r4, r1 @ preserve machine ID
- adr r0, str_a1
- bl printascii
- mov r0, r4
- bl printhex8
- adr r0, str_a2
- bl printascii
- adr r3, 3f
- ldmia r3, {r4, r5, r6} @ get machine desc list
- sub r4, r3, r4 @ get offset between virt&phys
- add r5, r5, r4 @ convert virt addresses to
- add r6, r6, r4 @ physical address space
-1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type
- bl printhex8
- mov r0, #'\t'
- bl printch
- ldr r0, [r5, #MACHINFO_NAME] @ get machine name
- add r0, r0, r4
- bl printascii
- mov r0, #'\n'
- bl printch
- add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
- cmp r5, r6
- blo 1b
- adr r0, str_a3
- bl printascii
- b __error
-str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x"
-str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
-str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n"
- .align
-#endif
-
- .type __error, %function
-__error:
-#ifdef CONFIG_ARCH_RPC
-/*
- * Turn the screen red on a error - RiscPC only.
- */
- mov r0, #0x02000000
- mov r3, #0x11
- orr r3, r3, r3, lsl #8
- orr r3, r3, r3, lsl #16
- str r3, [r0], #4
- str r3, [r0], #4
- str r3, [r0], #4
- str r3, [r0], #4
-#endif
-1: mov r0, r0
- b 1b
-
-
-/*
- * Read processor ID register (CP#15, CR0), and look up in the linker-built
- * supported processor list. Note that we can't use the absolute addresses
- * for the __proc_info lists since we aren't running with the MMU on
- * (and therefore, we are not in the correct address space). We have to
- * calculate the offset.
- *
- * r9 = cpuid
- * Returns:
- * r3, r4, r6 corrupted
- * r5 = proc_info pointer in physical address space
- * r9 = cpuid (preserved)
- */
- .type __lookup_processor_type, %function
-__lookup_processor_type:
- adr r3, 3f
- ldmda r3, {r5 - r7}
- sub r3, r3, r7 @ get offset between virt&phys
- add r5, r5, r3 @ convert virt addresses to
- add r6, r6, r3 @ physical address space
-1: ldmia r5, {r3, r4} @ value, mask
- and r4, r4, r9 @ mask wanted bits
- teq r3, r4
- beq 2f
- add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list)
- cmp r5, r6
- blo 1b
- mov r5, #0 @ unknown processor
-2: mov pc, lr
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_processor_type)
- stmfd sp!, {r4 - r7, r9, lr}
- mov r9, r0
- bl __lookup_processor_type
- mov r0, r5
- ldmfd sp!, {r4 - r7, r9, pc}
-
-/*
- * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
- * more information about the __proc_info and __arch_info structures.
- */
- .long __proc_info_begin
- .long __proc_info_end
-3: .long .
- .long __arch_info_begin
- .long __arch_info_end
-
-/*
- * Lookup machine architecture in the linker-build list of architectures.
- * Note that we can't use the absolute addresses for the __arch_info
- * lists since we aren't running with the MMU on (and therefore, we are
- * not in the correct address space). We have to calculate the offset.
- *
- * r1 = machine architecture number
- * Returns:
- * r3, r4, r6 corrupted
- * r5 = mach_info pointer in physical address space
- */
- .type __lookup_machine_type, %function
-__lookup_machine_type:
- adr r3, 3b
- ldmia r3, {r4, r5, r6}
- sub r3, r3, r4 @ get offset between virt&phys
- add r5, r5, r3 @ convert virt addresses to
- add r6, r6, r3 @ physical address space
-1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type
- teq r3, r1 @ matches loader number?
- beq 2f @ found
- add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
- cmp r5, r6
- blo 1b
- mov r5, #0 @ unknown machine
-2: mov pc, lr
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_machine_type)
- stmfd sp!, {r4 - r6, lr}
- mov r1, r0
- bl __lookup_machine_type
- mov r0, r5
- ldmfd sp!, {r4 - r6, pc}
+#include "head-common.S"
projects / linux-2.6 / commitdiff