Blackfin Serial driver: Fix bug - serial driver in PIO mode cant handle input very...

Output as many bytes as possible in PIO tx handler.
This reduce the number of tx interrupts and shorten the delay to handle
rx interrupt. So, rx overrun disappears.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index ac2a3ef28d55435d3673a8909e01ee27c77ebd82..e059475c91ae803c318641ef0a0897991cd771ba 100644 (file)
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -74,7 +74,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
 #else
 static void bfin_serial_do_work(struct work_struct *work);
 static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
-static void local_put_char(struct bfin_serial_port *uart, char ch);
 #endif
 
 static void bfin_serial_mctrl_check(struct bfin_serial_port *uart);
@@ -85,6 +84,9 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart);
 static void bfin_serial_stop_tx(struct uart_port *port)
 {
        struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+#ifndef CONFIG_BF54x
+       unsigned short ier;
+#endif
 
        while (!(UART_GET_LSR(uart) & TEMT))
                continue;
@@ -100,8 +102,6 @@ static void bfin_serial_stop_tx(struct uart_port *port)
        UART_PUT_LSR(uart, TFI);
        UART_CLEAR_IER(uart, ETBEI);
 #else
-       unsigned short ier;
-
        ier = UART_GET_IER(uart);
        ier &= ~ETBEI;
        UART_PUT_IER(uart, ier);
@@ -210,23 +210,6 @@ int kgdb_get_debug_char(void)
 #endif
 
 #ifdef CONFIG_SERIAL_BFIN_PIO
-static void local_put_char(struct bfin_serial_port *uart, char ch)
-{
-       unsigned short status;
-       int flags = 0;
-
-       spin_lock_irqsave(&uart->port.lock, flags);
-
-       do {
-               status = UART_GET_LSR(uart);
-       } while (!(status & THRE));
-
-       UART_PUT_CHAR(uart, ch);
-       SSYNC();
-
-       spin_unlock_irqrestore(&uart->port.lock, flags);
-}
-
 static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 {
        struct tty_struct *tty = uart->port.info->tty;
@@ -236,8 +219,8 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
        struct pt_regs *regs = get_irq_regs();
 #endif
 
-       status = UART_GET_LSR(uart);
        ch = UART_GET_CHAR(uart);
+       status = UART_GET_LSR(uart);
        uart->port.icount.rx++;
 
 #ifdef CONFIG_KGDB_UART
@@ -337,9 +320,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
                return;
        }
 
-       local_put_char(uart, xmit->buf[xmit->tail]);
-       xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-       uart->port.icount.tx++;
+       while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
+               UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
+               xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+               uart->port.icount.tx++;
+               SSYNC();
+       }
 
        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
                uart_write_wakeup(&uart->port);
@@ -352,21 +338,11 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
 {
        struct bfin_serial_port *uart = dev_id;
 
-#ifdef CONFIG_BF54x
-       unsigned short status;
        spin_lock(&uart->port.lock);
-       status = UART_GET_LSR(uart);
-       while ((UART_GET_IER(uart) & ERBFI) && (status & DR)) {
+       while ((UART_GET_IER(uart) & ERBFI) && (UART_GET_LSR(uart) & DR))
                bfin_serial_rx_chars(uart);
-               status = UART_GET_LSR(uart);
-       }
        spin_unlock(&uart->port.lock);
-#else
-       spin_lock(&uart->port.lock);
-       while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY)
-               bfin_serial_rx_chars(uart);
-       spin_unlock(&uart->port.lock);
-#endif
+
        return IRQ_HANDLED;
 }
 
@@ -374,21 +350,11 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
 {
        struct bfin_serial_port *uart = dev_id;
 
-#ifdef CONFIG_BF54x
-       unsigned short status;
        spin_lock(&uart->port.lock);
-       status = UART_GET_LSR(uart);
-       while ((UART_GET_IER(uart) & ETBEI) && (status & THRE)) {
+       if ((UART_GET_IER(uart) & ETBEI) && (UART_GET_LSR(uart) & THRE))
                bfin_serial_tx_chars(uart);
-               status = UART_GET_LSR(uart);
-       }
        spin_unlock(&uart->port.lock);
-#else
-       spin_lock(&uart->port.lock);
-       while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY)
-               bfin_serial_tx_chars(uart);
-       spin_unlock(&uart->port.lock);
-#endif
+
        return IRQ_HANDLED;
 }