ide: remove stale changelog/comments/TODO from ide.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index f3ea5ea41fd41fa1c14777409ad637aed748b3b0..c438cc314238cf6da70400c6cad32a4d2216bba8 100644 (file)
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -16,10 +16,6 @@
  *   (usually 14 & 15).
  * There can be up to two drives per interface, as per the ATA-2 spec.
  *
- * Primary:    ide0, port 0x1f0; major=3;  hda is minor=0; hdb is minor=64
- * Secondary:  ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64
- * Tertiary:   ide2, port 0x???; major=33; hde is minor=0; hdf is minor=64
- * Quaternary: ide3, port 0x???; major=34; hdg is minor=0; hdh is minor=64
  * ...
  *
  *  From hd.c:
@@ -47,80 +43,6 @@
  *  This was a rewrite of just about everything from hd.c, though some original
  *  code is still sprinkled about.  Think of it as a major evolution, with
  *  inspiration from lots of linux users, esp.  hamish@zot.apana.org.au
- *
- *  Version 1.0 ALPHA  initial code, primary i/f working okay
- *  Version 1.3 BETA   dual i/f on shared irq tested & working!
- *  Version 1.4 BETA   added auto probing for irq(s)
- *  Version 1.5 BETA   added ALPHA (untested) support for IDE cd-roms,
- *  ...
- * Version 5.50                allow values as small as 20 for idebus=
- * Version 5.51                force non io_32bit in drive_cmd_intr()
- *                     change delay_10ms() to delay_50ms() to fix problems
- * Version 5.52                fix incorrect invalidation of removable devices
- *                     add "hdx=slow" command line option
- * Version 5.60                start to modularize the driver; the disk and ATAPI
- *                      drivers can be compiled as loadable modules.
- *                     move IDE probe code to ide-probe.c
- *                     move IDE disk code to ide-disk.c
- *                     add support for generic IDE device subdrivers
- *                     add m68k code from Geert Uytterhoeven
- *                     probe all interfaces by default
- *                     add ioctl to (re)probe an interface
- * Version 6.00                use per device request queues
- *                     attempt to optimize shared hwgroup performance
- *                     add ioctl to manually adjust bandwidth algorithms
- *                     add kerneld support for the probe module
- *                     fix bug in ide_error()
- *                     fix bug in the first ide_get_lock() call for Atari
- *                     don't flush leftover data for ATAPI devices
- * Version 6.01                clear hwgroup->active while the hwgroup sleeps
- *                     support HDIO_GETGEO for floppies
- * Version 6.02                fix ide_ack_intr() call
- *                     check partition table on floppies
- * Version 6.03                handle bad status bit sequencing in ide_wait_stat()
- * Version 6.10                deleted old entries from this list of updates
- *                     replaced triton.c with ide-dma.c generic PCI DMA
- *                     added support for BIOS-enabled UltraDMA
- *                     rename all "promise" things to "pdc4030"
- *                     fix EZ-DRIVE handling on small disks
- * Version 6.11                fix probe error in ide_scan_devices()
- *                     fix ancient "jiffies" polling bugs
- *                     mask all hwgroup interrupts on each irq entry
- * Version 6.12                integrate ioctl and proc interfaces
- *                     fix parsing of "idex=" command line parameter
- * Version 6.13                add support for ide4/ide5 courtesy rjones@orchestream.com
- * Version 6.14                fixed IRQ sharing among PCI devices
- * Version 6.15                added SMP awareness to IDE drivers
- * Version 6.16                fixed various bugs; even more SMP friendly
- * Version 6.17                fix for newest EZ-Drive problem
- * Version 6.18                default unpartitioned-disk translation now "BIOS LBA"
- * Version 6.19                Re-design for a UNIFORM driver for all platforms,
- *                       model based on suggestions from Russell King and
- *                       Geert Uytterhoeven
- *                     Promise DC4030VL now supported.
- *                     add support for ide6/ide7
- *                     delay_50ms() changed to ide_delay_50ms() and exported.
- * Version 6.20                Added/Fixed Generic ATA-66 support and hwif detection.
- *                     Added hdx=flash to allow for second flash disk
- *                       detection w/o the hang loop.
- *                     Added support for ide8/ide9
- *                     Added idex=ata66 for the quirky chipsets that are
- *                       ATA-66 compliant, but have yet to determine a method
- *                       of verification of the 80c cable presence.
- *                       Specifically Promise's PDC20262 chipset.
- * Version 6.21                Fixing/Fixed SMP spinlock issue with insight from an old
- *                       hat that clarified original low level driver design.
- * Version 6.30                Added SMP support; fixed multmode issues.  -ml
- * Version 6.31                Debug Share INTR's and request queue streaming
- *                     Native ATA-100 support
- *                     Prep for Cascades Project
- * Version 7.00alpha   First named revision of ide rearrange
- *
- *  Some additional driver compile-time options are in ./include/linux/ide.h
- *
- *  To do, in likely order of completion:
- *     - modify kernel to obtain BIOS geometry for drives on 2nd/3rd/4th i/f
- *
  */
 
 #define        REVISION        "Revision: 7.00alpha2"