--- /dev/null
+/* linux/include/linux/clocksource.h
+ *
+ * This file contains the structure definitions for clocksources.
+ *
+ * If you are not a clocksource, or timekeeping code, you should
+ * not be including this file!
+ */
+#ifndef _LINUX_CLOCKSOURCE_H
+#define _LINUX_CLOCKSOURCE_H
+
+#include <linux/types.h>
+#include <linux/timex.h>
+#include <linux/time.h>
+#include <linux/list.h>
+#include <asm/div64.h>
+#include <asm/io.h>
+
+/* clocksource cycle base type */
+typedef u64 cycle_t;
+
+/**
+ * struct clocksource - hardware abstraction for a free running counter
+ * Provides mostly state-free accessors to the underlying hardware.
+ *
+ * @name: ptr to clocksource name
+ * @list: list head for registration
+ * @rating: rating value for selection (higher is better)
+ * To avoid rating inflation the following
+ * list should give you a guide as to how
+ * to assign your clocksource a rating
+ * 1-99: Unfit for real use
+ * Only available for bootup and testing purposes.
+ * 100-199: Base level usability.
+ * Functional for real use, but not desired.
+ * 200-299: Good.
+ * A correct and usable clocksource.
+ * 300-399: Desired.
+ * A reasonably fast and accurate clocksource.
+ * 400-499: Perfect
+ * The ideal clocksource. A must-use where
+ * available.
+ * @read: returns a cycle value
+ * @mask: bitmask for two's complement
+ * subtraction of non 64 bit counters
+ * @mult: cycle to nanosecond multiplier
+ * @shift: cycle to nanosecond divisor (power of two)
+ * @update_callback: called when safe to alter clocksource values
+ * @is_continuous: defines if clocksource is free-running.
+ * @interval_cycles: Used internally by timekeeping core, please ignore.
+ * @interval_snsecs: Used internally by timekeeping core, please ignore.
+ */
+struct clocksource {
+ char *name;
+ struct list_head list;
+ int rating;
+ cycle_t (*read)(void);
+ cycle_t mask;
+ u32 mult;
+ u32 shift;
+ int (*update_callback)(void);
+ int is_continuous;
+
+ /* timekeeping specific data, ignore */
+ cycle_t interval_cycles;
+ u64 interval_snsecs;
+};
+
+
+/**
+ * clocksource_khz2mult - calculates mult from khz and shift
+ * @khz: Clocksource frequency in KHz
+ * @shift_constant: Clocksource shift factor
+ *
+ * Helper functions that converts a khz counter frequency to a timsource
+ * multiplier, given the clocksource shift value
+ */
+static inline u32 clocksource_khz2mult(u32 khz, u32 shift_constant)
+{
+ /* khz = cyc/(Million ns)
+ * mult/2^shift = ns/cyc
+ * mult = ns/cyc * 2^shift
+ * mult = 1Million/khz * 2^shift
+ * mult = 1000000 * 2^shift / khz
+ * mult = (1000000<<shift) / khz
+ */
+ u64 tmp = ((u64)1000000) << shift_constant;
+
+ tmp += khz/2; /* round for do_div */
+ do_div(tmp, khz);
+
+ return (u32)tmp;
+}
+
+/**
+ * clocksource_hz2mult - calculates mult from hz and shift
+ * @hz: Clocksource frequency in Hz
+ * @shift_constant: Clocksource shift factor
+ *
+ * Helper functions that converts a hz counter
+ * frequency to a timsource multiplier, given the
+ * clocksource shift value
+ */
+static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant)
+{
+ /* hz = cyc/(Billion ns)
+ * mult/2^shift = ns/cyc
+ * mult = ns/cyc * 2^shift
+ * mult = 1Billion/hz * 2^shift
+ * mult = 1000000000 * 2^shift / hz
+ * mult = (1000000000<<shift) / hz
+ */
+ u64 tmp = ((u64)1000000000) << shift_constant;
+
+ tmp += hz/2; /* round for do_div */
+ do_div(tmp, hz);
+
+ return (u32)tmp;
+}
+
+/**
+ * read_clocksource: - Access the clocksource's current cycle value
+ * @cs: pointer to clocksource being read
+ *
+ * Uses the clocksource to return the current cycle_t value
+ */
+static inline cycle_t read_clocksource(struct clocksource *cs)
+{
+ return cs->read();
+}
+
+/**
+ * cyc2ns - converts clocksource cycles to nanoseconds
+ * @cs: Pointer to clocksource
+ * @cycles: Cycles
+ *
+ * Uses the clocksource and ntp ajdustment to convert cycle_ts to nanoseconds.
+ *
+ * XXX - This could use some mult_lxl_ll() asm optimization
+ */
+static inline s64 cyc2ns(struct clocksource *cs, cycle_t cycles)
+{
+ u64 ret = (u64)cycles;
+ ret = (ret * cs->mult) >> cs->shift;
+ return ret;
+}
+
+/**
+ * calculate_clocksource_interval - Calculates a clocksource interval struct
+ *
+ * @c: Pointer to clocksource.
+ * @length_nsec: Desired interval length in nanoseconds.
+ *
+ * Calculates a fixed cycle/nsec interval for a given clocksource/adjustment
+ * pair and interval request.
+ *
+ * Unless you're the timekeeping code, you should not be using this!
+ */
+static inline void calculate_clocksource_interval(struct clocksource *c,
+ unsigned long length_nsec)
+{
+ u64 tmp;
+
+ /* XXX - All of this could use a whole lot of optimization */
+ tmp = length_nsec;
+ tmp <<= c->shift;
+ tmp += c->mult/2;
+ do_div(tmp, c->mult);
+
+ c->interval_cycles = (cycle_t)tmp;
+ if(c->interval_cycles == 0)
+ c->interval_cycles = 1;
+
+ c->interval_snsecs = (u64)c->interval_cycles * c->mult;
+}
+
+/* used to install a new clocksource */
+int register_clocksource(struct clocksource*);
+void reselect_clocksource(void);
+struct clocksource* get_next_clocksource(void);
+
+#endif /* _LINUX_CLOCKSOURCE_H */
--- /dev/null
+/*
+ * linux/kernel/time/clocksource.c
+ *
+ * This file contains the functions which manage clocksource drivers.
+ *
+ * Copyright (C) 2004, 2005 IBM, John Stultz (johnstul@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO WishList:
+ * o Allow clocksource drivers to be unregistered
+ * o get rid of clocksource_jiffies extern
+ */
+
+#include <linux/clocksource.h>
+#include <linux/sysdev.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+/* XXX - Would like a better way for initializing curr_clocksource */
+extern struct clocksource clocksource_jiffies;
+
+/*[Clocksource internal variables]---------
+ * curr_clocksource:
+ * currently selected clocksource. Initialized to clocksource_jiffies.
+ * next_clocksource:
+ * pending next selected clocksource.
+ * clocksource_list:
+ * linked list with the registered clocksources
+ * clocksource_lock:
+ * protects manipulations to curr_clocksource and next_clocksource
+ * and the clocksource_list
+ * override_name:
+ * Name of the user-specified clocksource.
+ */
+static struct clocksource *curr_clocksource = &clocksource_jiffies;
+static struct clocksource *next_clocksource;
+static LIST_HEAD(clocksource_list);
+static DEFINE_SPINLOCK(clocksource_lock);
+static char override_name[32];
+static int finished_booting;
+
+/* clocksource_done_booting - Called near the end of bootup
+ *
+ * Hack to avoid lots of clocksource churn at boot time
+ */
+static int clocksource_done_booting(void)
+{
+ finished_booting = 1;
+ return 0;
+}
+
+late_initcall(clocksource_done_booting);
+
+/**
+ * get_next_clocksource - Returns the selected clocksource
+ *
+ */
+struct clocksource *get_next_clocksource(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocksource_lock, flags);
+ if (next_clocksource && finished_booting) {
+ curr_clocksource = next_clocksource;
+ next_clocksource = NULL;
+ }
+ spin_unlock_irqrestore(&clocksource_lock, flags);
+
+ return curr_clocksource;
+}
+
+/**
+ * select_clocksource - Finds the best registered clocksource.
+ *
+ * Private function. Must hold clocksource_lock when called.
+ *
+ * Looks through the list of registered clocksources, returning
+ * the one with the highest rating value. If there is a clocksource
+ * name that matches the override string, it returns that clocksource.
+ */
+static struct clocksource *select_clocksource(void)
+{
+ struct clocksource *best = NULL;
+ struct list_head *tmp;
+
+ list_for_each(tmp, &clocksource_list) {
+ struct clocksource *src;
+
+ src = list_entry(tmp, struct clocksource, list);
+ if (!best)
+ best = src;
+
+ /* check for override: */
+ if (strlen(src->name) == strlen(override_name) &&
+ !strcmp(src->name, override_name)) {
+ best = src;
+ break;
+ }
+ /* pick the highest rating: */
+ if (src->rating > best->rating)
+ best = src;
+ }
+
+ return best;
+}
+
+/**
+ * is_registered_source - Checks if clocksource is registered
+ * @c: pointer to a clocksource
+ *
+ * Private helper function. Must hold clocksource_lock when called.
+ *
+ * Returns one if the clocksource is already registered, zero otherwise.
+ */
+static int is_registered_source(struct clocksource *c)
+{
+ int len = strlen(c->name);
+ struct list_head *tmp;
+
+ list_for_each(tmp, &clocksource_list) {
+ struct clocksource *src;
+
+ src = list_entry(tmp, struct clocksource, list);
+ if (strlen(src->name) == len && !strcmp(src->name, c->name))
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * register_clocksource - Used to install new clocksources
+ * @t: clocksource to be registered
+ *
+ * Returns -EBUSY if registration fails, zero otherwise.
+ */
+int register_clocksource(struct clocksource *c)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocksource_lock, flags);
+ /* check if clocksource is already registered */
+ if (is_registered_source(c)) {
+ printk("register_clocksource: Cannot register %s. "
+ "Already registered!", c->name);
+ ret = -EBUSY;
+ } else {
+ /* register it */
+ list_add(&c->list, &clocksource_list);
+ /* scan the registered clocksources, and pick the best one */
+ next_clocksource = select_clocksource();
+ }
+ spin_unlock_irqrestore(&clocksource_lock, flags);
+ return ret;
+}
+
+EXPORT_SYMBOL(register_clocksource);
+
+/**
+ * reselect_clocksource - Rescan list for next clocksource
+ *
+ * A quick helper function to be used if a clocksource changes its
+ * rating. Forces the clocksource list to be re-scaned for the best
+ * clocksource.
+ */
+void reselect_clocksource(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocksource_lock, flags);
+ next_clocksource = select_clocksource();
+ spin_unlock_irqrestore(&clocksource_lock, flags);
+}
+
+/**
+ * sysfs_show_current_clocksources - sysfs interface for current clocksource
+ * @dev: unused
+ * @buf: char buffer to be filled with clocksource list
+ *
+ * Provides sysfs interface for listing current clocksource.
+ */
+static ssize_t
+sysfs_show_current_clocksources(struct sys_device *dev, char *buf)
+{
+ char *curr = buf;
+
+ spin_lock_irq(&clocksource_lock);
+ curr += sprintf(curr, "%s ", curr_clocksource->name);
+ spin_unlock_irq(&clocksource_lock);
+
+ curr += sprintf(curr, "\n");
+
+ return curr - buf;
+}
+
+/**
+ * sysfs_override_clocksource - interface for manually overriding clocksource
+ * @dev: unused
+ * @buf: name of override clocksource
+ * @count: length of buffer
+ *
+ * Takes input from sysfs interface for manually overriding the default
+ * clocksource selction.
+ */
+static ssize_t sysfs_override_clocksource(struct sys_device *dev,
+ const char *buf, size_t count)
+{
+ size_t ret = count;
+ /* strings from sysfs write are not 0 terminated! */
+ if (count >= sizeof(override_name))
+ return -EINVAL;
+
+ /* strip of \n: */
+ if (buf[count-1] == '\n')
+ count--;
+ if (count < 1)
+ return -EINVAL;
+
+ spin_lock_irq(&clocksource_lock);
+
+ /* copy the name given: */
+ memcpy(override_name, buf, count);
+ override_name[count] = 0;
+
+ /* try to select it: */
+ next_clocksource = select_clocksource();
+
+ spin_unlock_irq(&clocksource_lock);
+
+ return ret;
+}
+
+/**
+ * sysfs_show_available_clocksources - sysfs interface for listing clocksource
+ * @dev: unused
+ * @buf: char buffer to be filled with clocksource list
+ *
+ * Provides sysfs interface for listing registered clocksources
+ */
+static ssize_t
+sysfs_show_available_clocksources(struct sys_device *dev, char *buf)
+{
+ struct list_head *tmp;
+ char *curr = buf;
+
+ spin_lock_irq(&clocksource_lock);
+ list_for_each(tmp, &clocksource_list) {
+ struct clocksource *src;
+
+ src = list_entry(tmp, struct clocksource, list);
+ curr += sprintf(curr, "%s ", src->name);
+ }
+ spin_unlock_irq(&clocksource_lock);
+
+ curr += sprintf(curr, "\n");
+
+ return curr - buf;
+}
+
+/*
+ * Sysfs setup bits:
+ */
+static SYSDEV_ATTR(current_clocksource, 0600, sysfs_show_current_clocksources,
+ sysfs_override_clocksource);
+
+static SYSDEV_ATTR(available_clocksource, 0600,
+ sysfs_show_available_clocksources, NULL);
+
+static struct sysdev_class clocksource_sysclass = {
+ set_kset_name("clocksource"),
+};
+
+static struct sys_device device_clocksource = {
+ .id = 0,
+ .cls = &clocksource_sysclass,
+};
+
+static int init_clocksource_sysfs(void)
+{
+ int error = sysdev_class_register(&clocksource_sysclass);
+
+ if (!error)
+ error = sysdev_register(&device_clocksource);
+ if (!error)
+ error = sysdev_create_file(
+ &device_clocksource,
+ &attr_current_clocksource);
+ if (!error)
+ error = sysdev_create_file(
+ &device_clocksource,
+ &attr_available_clocksource);
+ return error;
+}
+
+device_initcall(init_clocksource_sysfs);
+
+/**
+ * boot_override_clocksource - boot clock override
+ * @str: override name
+ *
+ * Takes a clocksource= boot argument and uses it
+ * as the clocksource override name.
+ */
+static int __init boot_override_clocksource(char* str)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&clocksource_lock, flags);
+ if (str)
+ strlcpy(override_name, str, sizeof(override_name));
+ spin_unlock_irqrestore(&clocksource_lock, flags);
+ return 1;
+}
+
+__setup("clocksource=", boot_override_clocksource);
+
+/**
+ * boot_override_clock - Compatibility layer for deprecated boot option
+ * @str: override name
+ *
+ * DEPRECATED! Takes a clock= boot argument and uses it
+ * as the clocksource override name
+ */
+static int __init boot_override_clock(char* str)
+{
+ printk("Warning! clock= boot option is deprecated.\n");
+
+ return boot_override_clocksource(str);
+}
+
+__setup("clock=", boot_override_clock);
--- /dev/null
+/***********************************************************************
+* linux/kernel/time/jiffies.c
+*
+* This file contains the jiffies based clocksource.
+*
+* Copyright (C) 2004, 2005 IBM, John Stultz (johnstul@us.ibm.com)
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*
+************************************************************************/
+#include <linux/clocksource.h>
+#include <linux/jiffies.h>
+#include <linux/init.h>
+
+/* The Jiffies based clocksource is the lowest common
+ * denominator clock source which should function on
+ * all systems. It has the same coarse resolution as
+ * the timer interrupt frequency HZ and it suffers
+ * inaccuracies caused by missed or lost timer
+ * interrupts and the inability for the timer
+ * interrupt hardware to accuratly tick at the
+ * requested HZ value. It is also not reccomended
+ * for "tick-less" systems.
+ */
+#define NSEC_PER_JIFFY ((u32)((((u64)NSEC_PER_SEC)<<8)/ACTHZ))
+
+/* Since jiffies uses a simple NSEC_PER_JIFFY multiplier
+ * conversion, the .shift value could be zero. However
+ * this would make NTP adjustments impossible as they are
+ * in units of 1/2^.shift. Thus we use JIFFIES_SHIFT to
+ * shift both the nominator and denominator the same
+ * amount, and give ntp adjustments in units of 1/2^8
+ *
+ * The value 8 is somewhat carefully chosen, as anything
+ * larger can result in overflows. NSEC_PER_JIFFY grows as
+ * HZ shrinks, so values greater then 8 overflow 32bits when
+ * HZ=100.
+ */
+#define JIFFIES_SHIFT 8
+
+static cycle_t jiffies_read(void)
+{
+ return (cycle_t) jiffies;
+}
+
+struct clocksource clocksource_jiffies = {
+ .name = "jiffies",
+ .rating = 0, /* lowest rating*/
+ .read = jiffies_read,
+ .mask = 0xffffffff, /*32bits*/
+ .mult = NSEC_PER_JIFFY << JIFFIES_SHIFT, /* details above */
+ .shift = JIFFIES_SHIFT,
+ .is_continuous = 0, /* tick based, not free running */
+};
+
+static int __init init_jiffies_clocksource(void)
+{
+ return register_clocksource(&clocksource_jiffies);
+}
+
+module_init(init_jiffies_clocksource);
projects / linux-2.6 / commitdiff