*
* NAND read out-of-band data from the spare area
*/
-static int nand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, uint8_t *buf)
+static int nand_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, uint8_t *buf)
{
- int i, col, page, chipnr;
+ int col, page, realpage, chipnr, sndcmd = 1;
struct nand_chip *chip = mtd->priv;
- int blockcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
-
- DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int)from, (int)len);
-
- /* Shift to get page */
- page = (int)(from >> chip->page_shift);
- chipnr = (int)(from >> chip->chip_shift);
+ int blkcheck = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
+ int readlen = len;
- /* Mask to get column */
- col = from & (mtd->oobsize - 1);
+ DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n",
+ (unsigned int)from, (int)len);
/* Initialize return length value */
*retlen = 0;
/* Do not allow reads past end of device */
if ((from + len) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: Attempt read beyond end of device\n");
- *retlen = 0;
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
+ "Attempt read beyond end of device\n");
return -EINVAL;
}
- /* Grab the lock and see if the device is available */
nand_get_device(chip, mtd, FL_READING);
- /* Select the NAND device */
+ chipnr = (int)(from >> chip->chip_shift);
chip->select_chip(mtd, chipnr);
- /* Send the read command */
- chip->cmdfunc(mtd, NAND_CMD_READOOB, col, page & chip->pagemask);
- /*
- * Read the data, if we read more than one page
- * oob data, let the device transfer the data !
- */
- i = 0;
- while (i < len) {
- int thislen = mtd->oobsize - col;
- thislen = min_t(int, thislen, len);
- chip->read_buf(mtd, &buf[i], thislen);
- i += thislen;
-
- /* Read more ? */
- if (i < len) {
- page++;
- col = 0;
+ /* Shift to get page */
+ realpage = (int)(from >> chip->page_shift);
+ page = realpage & chip->pagemask;
- /* Check, if we cross a chip boundary */
- if (!(page & chip->pagemask)) {
- chipnr++;
- chip->select_chip(mtd, -1);
- chip->select_chip(mtd, chipnr);
- }
+ /* Mask to get column */
+ col = from & (mtd->oobsize - 1);
+
+ while(1) {
+ int bytes = min((int)(mtd->oobsize - col), readlen);
+
+ if (likely(sndcmd)) {
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, col, page);
+ sndcmd = 0;
+ }
+
+ chip->read_buf(mtd, buf, bytes);
- /* Apply delay or wait for ready/busy pin
- * Do this before the AUTOINCR check, so no problems
- * arise if a chip which does auto increment
- * is marked as NOAUTOINCR by the board driver.
+ readlen -= bytes;
+ if (!readlen)
+ break;
+
+ if (!(chip->options & NAND_NO_READRDY)) {
+ /*
+ * Apply delay or wait for ready/busy pin. Do this
+ * before the AUTOINCR check, so no problems arise if a
+ * chip which does auto increment is marked as
+ * NOAUTOINCR by the board driver.
*/
if (!chip->dev_ready)
udelay(chip->chip_delay);
else
nand_wait_ready(mtd);
+ }
- /* Check, if the chip supports auto page increment
- * or if we have hit a block boundary.
- */
- if (!NAND_CANAUTOINCR(chip) || !(page & blockcheck)) {
- /* For subsequent page reads set offset to 0 */
- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0x0, page & chip->pagemask);
- }
+ buf += bytes;
+ bytes = mtd->oobsize;
+ col = 0;
+
+ /* Increment page address */
+ realpage++;
+
+ page = realpage & chip->pagemask;
+ /* Check, if we cross a chip boundary */
+ if (!page) {
+ chipnr++;
+ chip->select_chip(mtd, -1);
+ chip->select_chip(mtd, chipnr);
}
+
+ /* Check, if the chip supports auto page increment
+ * or if we have hit a block boundary.
+ */
+ if (!NAND_CANAUTOINCR(chip) || !(page & blkcheck))
+ sndcmd = 1;
}
/* Deselect and wake up anyone waiting on the device */
nand_release_device(mtd);
- /* Return happy */
*retlen = len;
return 0;
}
return ret;
}
+
/**
* nand_write_oob - [MTD Interface] NAND write out-of-band
* @mtd: MTD device structure
*
* NAND write out-of-band
*/
-static int nand_write_oob(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const uint8_t *buf)
+static int nand_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const uint8_t *buf)
{
int column, page, status, ret = -EIO, chipnr;
struct nand_chip *chip = mtd->priv;
- DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int)to, (int)len);
-
- /* Shift to get page */
- page = (int)(to >> chip->page_shift);
- chipnr = (int)(to >> chip->chip_shift);
-
- /* Mask to get column */
- column = to & (mtd->oobsize - 1);
+ DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n",
+ (unsigned int)to, (int)len);
/* Initialize return length value */
*retlen = 0;
/* Do not allow write past end of page */
+ column = to & (mtd->oobsize - 1);
if ((column + len) > mtd->oobsize) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n");
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
+ "Attempt to write past end of page\n");
return -EINVAL;
}
- /* Grab the lock and see if the device is available */
nand_get_device(chip, mtd, FL_WRITING);
- /* Select the NAND device */
+ chipnr = (int)(to >> chip->chip_shift);
chip->select_chip(mtd, chipnr);
- /* Reset the chip. Some chips (like the Toshiba TC5832DC found
- in one of my DiskOnChip 2000 test units) will clear the whole
- data page too if we don't do this. I have no clue why, but
- I seem to have 'fixed' it in the doc2000 driver in
- August 1999. dwmw2. */
+ /* Shift to get page */
+ page = (int)(to >> chip->page_shift);
+
+ /*
+ * Reset the chip. Some chips (like the Toshiba TC5832DC found in one
+ * of my DiskOnChip 2000 test units) will clear the whole data page too
+ * if we don't do this. I have no clue why, but I seem to have 'fixed'
+ * it in the doc2000 driver in August 1999. dwmw2.
+ */
chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
/* Check, if it is write protected */
chip->pagebuf = -1;
if (NAND_MUST_PAD(chip)) {
- /* Write out desired data */
- chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page & chip->pagemask);
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize,
+ page & chip->pagemask);
/* prepad 0xff for partial programming */
chip->write_buf(mtd, ffchars, column);
/* write data */
/* postpad 0xff for partial programming */
chip->write_buf(mtd, ffchars, mtd->oobsize - (len + column));
} else {
- /* Write out desired data */
- chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + column, page & chip->pagemask);
- /* write data */
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + column,
+ page & chip->pagemask);
chip->write_buf(mtd, buf, len);
}
/* Send command to program the OOB data */
/* See if device thinks it succeeded */
if (status & NAND_STATUS_FAIL) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
+ "Failed write, page 0x%08x\n", page);
ret = -EIO;
goto out;
}
- /* Return happy */
*retlen = len;
#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
chip->cmdfunc(mtd, NAND_CMD_READOOB, column, page & chip->pagemask);
if (chip->verify_buf(mtd, buf, len)) {
- DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write verify, page 0x%08x\n", page);
+ DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
+ "Failed write verify, page 0x%08x\n", page);
ret = -EIO;
goto out;
}
projects / linux-2.6 / commitdiff