]> err.no Git - linux-2.6/commitdiff
MMC/SD card driver learns SPI
authorDavid Brownell <david-b@pacbell.net>
Wed, 8 Aug 2007 16:10:23 +0000 (09:10 -0700)
committerPierre Ossman <drzeus@drzeus.cx>
Sun, 23 Sep 2007 19:39:47 +0000 (21:39 +0200)
Teaching the MMC/SD block card driver about SPI.

 - Provide the SPI response type flags with each request issued.

 - Understand that multiblock SPI writes don't use STOP_TRANSMISSION.

 - Correct check for APP_CMD failure.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
drivers/mmc/card/block.c

index ab510689ecde7e0e709e242be821f2601e8d4514..e38d5a3b2a899d6f9988e12ad294bf47862959c6 100644 (file)
@@ -151,17 +151,19 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 
        cmd.opcode = MMC_APP_CMD;
        cmd.arg = card->rca << 16;
-       cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+       cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
 
        err = mmc_wait_for_cmd(card->host, &cmd, 0);
-       if (err || !(cmd.resp[0] & R1_APP_CMD))
+       if (err)
+               return (u32)-1;
+       if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD))
                return (u32)-1;
 
        memset(&cmd, 0, sizeof(struct mmc_command));
 
        cmd.opcode = SD_APP_SEND_NUM_WR_BLKS;
        cmd.arg = 0;
-       cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+       cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
 
        memset(&data, 0, sizeof(struct mmc_data));
 
@@ -220,11 +222,11 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
                brq.cmd.arg = req->sector;
                if (!mmc_card_blockaddr(card))
                        brq.cmd.arg <<= 9;
-               brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+               brq.cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
                brq.data.blksz = 1 << md->block_bits;
                brq.stop.opcode = MMC_STOP_TRANSMISSION;
                brq.stop.arg = 0;
-               brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
+               brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
                brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
                if (brq.data.blocks > card->host->max_blk_count)
                        brq.data.blocks = card->host->max_blk_count;
@@ -241,7 +243,12 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
                        brq.data.blocks = 1;
 
                if (brq.data.blocks > 1) {
-                       brq.mrq.stop = &brq.stop;
+                       /* SPI multiblock writes terminate using a special
+                        * token, not a STOP_TRANSMISSION request.
+                        */
+                       if (!mmc_host_is_spi(card->host)
+                                       || rq_data_dir(req) == READ)
+                               brq.mrq.stop = &brq.stop;
                        readcmd = MMC_READ_MULTIPLE_BLOCK;
                        writecmd = MMC_WRITE_MULTIPLE_BLOCK;
                } else {
@@ -301,7 +308,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
                        goto cmd_err;
                }
 
-               if (rq_data_dir(req) != READ) {
+               if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
                        do {
                                int err;
 
@@ -509,7 +516,7 @@ mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card)
        mmc_claim_host(card->host);
        cmd.opcode = MMC_SET_BLOCKLEN;
        cmd.arg = 1 << md->block_bits;
-       cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+       cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
        err = mmc_wait_for_cmd(card->host, &cmd, 5);
        mmc_release_host(card->host);