gpio: pca953x (i2c) handles max7310 too

The pca953x driver can handle another 8-bit I/O expander, the max7310.
This patch adds that chip to the list of supported IDs in that driver, and
expands the Kconfig helptext accordingly.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index bbd28342e771f415a4b7365653e3383757a398a2..008c38ba774f588f3a739983bb6f47e48ef618f5 100644 (file)
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -28,12 +28,18 @@ config DEBUG_GPIO
 comment "I2C GPIO expanders:"
 
 config GPIO_PCA953X
-       tristate "PCA953x I/O ports"
+       tristate "PCA953x, PCA955x, and MAX7310 I/O ports"
        depends on I2C
        help
-         Say yes here to support the PCA9534 (8-bit), PCA9535 (16-bit),
-         PCA9536 (4-bit), PCA9537 (4-bit), PCA9538 (8-bit), and PCA9539
-         (16-bit) I/O ports. These parts are made by NXP and TI.
+         Say yes here to provide access to several register-oriented
+         SMBus I/O expanders, made mostly by NXP or TI.  Compatible
+         models include:
+
+         4 bits:       pca9536, pca9537
+
+         8 bits:       max7310, pca9534, pca9538, pca9554, pca9557
+
+         16 bits:      pca9535, pca9539, pca9555
 
          This driver can also be built as a module.  If so, the module
          will be called pca953x.

diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 7e40e8a55edf247968690de9cb5348969df5c75b..a380730b61abe49800af8e655eaf5735d0524ad0 100644 (file)
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -33,7 +33,7 @@ static const struct i2c_device_id pca953x_id[] = {
        { "pca9554", 8, },
        { "pca9555", 16, },
        { "pca9557", 8, },
-       /* REVISIT several pca955x parts should work here too */
+       { "max7310", 8, },
        { }
 };
 MODULE_DEVICE_TABLE(i2c, pca953x_id);