]> err.no Git - linux-2.6/commitdiff
[IA64] hotplug/ia64: SN Hotplug Driver - SN Hotplug Driver code
authorPrarit Bhargava <prarit@sgi.com>
Wed, 6 Jul 2005 22:29:53 +0000 (15:29 -0700)
committerTony Luck <tony.luck@intel.com>
Wed, 6 Jul 2005 22:29:53 +0000 (15:29 -0700)
This patch is the SGI hotplug driver and additional changes required for
the driver.  These modifications include changes to the SN io_init.c code
for memory management, the inclusion of new SAL calls to enable and disable
PCI slots, and a hotplug-style driver.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
arch/ia64/sn/kernel/io_init.c
arch/ia64/sn/kernel/irq.c
arch/ia64/sn/pci/pcibr/pcibr_provider.c
drivers/pci/hotplug/Kconfig
drivers/pci/hotplug/Makefile
drivers/pci/hotplug/sgi_hotplug.c [new file with mode: 0644]
include/asm-ia64/sn/pcibr_provider.h
include/asm-ia64/sn/pcidev.h

index 041c4be02b2ac46b35b006466c80648f83a254ff..a67f39e448cb47a0d0aec8429bcbabbf0888d0bc 100644 (file)
 
 nasid_t master_nasid = INVALID_NASID;  /* Partition Master */
 
+static struct list_head sn_sysdata_list;
+
+/* sysdata list struct */
+struct sysdata_el {
+       struct list_head entry;
+       void *sysdata;
+};
+
 struct slab_info {
        struct hubdev_info hubdev;
 };
@@ -136,23 +144,6 @@ sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
        return ret_stuff.v0;
 }
 
-/*
- * sn_alloc_pci_sysdata() - This routine allocates a pci controller
- *     which is expected as the pci_dev and pci_bus sysdata by the Linux
- *     PCI infrastructure.
- */
-static inline struct pci_controller *sn_alloc_pci_sysdata(void)
-{
-       struct pci_controller *pci_sysdata;
-
-       pci_sysdata = kmalloc(sizeof(*pci_sysdata), GFP_KERNEL);
-       if (!pci_sysdata)
-               BUG();
-
-       memset(pci_sysdata, 0, sizeof(*pci_sysdata));
-       return pci_sysdata;
-}
-
 /*
  * sn_fixup_ionodes() - This routine initializes the HUB data strcuture for 
  *     each node in the system.
@@ -220,6 +211,15 @@ static void sn_fixup_ionodes(void)
 
 }
 
+void sn_pci_unfixup_slot(struct pci_dev *dev)
+{
+       struct pci_dev *host_pci_dev = SN_PCIDEV_INFO(dev)->host_pci_dev;
+
+       sn_irq_unfixup(dev);
+       pci_dev_put(host_pci_dev);
+       pci_dev_put(dev);
+}
+
 /*
  * sn_pci_fixup_slot() - This routine sets up a slot's resources
  * consistent with the Linux PCI abstraction layer.  Resources acquired
@@ -238,6 +238,7 @@ void sn_pci_fixup_slot(struct pci_dev *dev)
        unsigned long size;
        unsigned int bus_no, devfn;
 
+       pci_dev_get(dev); /* for the sysdata pointer */
        dev->sysdata = kmalloc(sizeof(struct pcidev_info), GFP_KERNEL);
        if (SN_PCIDEV_INFO(dev) <= 0)
                BUG();          /* Cannot afford to run out of memory */
@@ -276,7 +277,8 @@ void sn_pci_fixup_slot(struct pci_dev *dev)
                        dev->resource[idx].parent = &iomem_resource;
        }
 
-       /* Using the PROMs values for the PCI host bus, get the Linux
+       /*
+        * Using the PROMs values for the PCI host bus, get the Linux
         * PCI host_pci_dev struct and set up host bus linkages
         */
 
@@ -313,55 +315,57 @@ void sn_pci_fixup_slot(struct pci_dev *dev)
  * sn_pci_controller_fixup() - This routine sets up a bus's resources
  * consistent with the Linux PCI abstraction layer.
  */
-static void sn_pci_controller_fixup(int segment, int busnum)
+void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 {
        int status = 0;
        int nasid, cnode;
-       struct pci_bus *bus;
        struct pci_controller *controller;
        struct pcibus_bussoft *prom_bussoft_ptr;
        struct hubdev_info *hubdev_info;
        void *provider_soft;
        struct sn_pcibus_provider *provider;
 
-       status =
-           sal_get_pcibus_info((u64) segment, (u64) busnum,
-                               (u64) ia64_tpa(&prom_bussoft_ptr));
-       if (status > 0) {
-               return;         /* bus # does not exist */
-       }
-
+       status = sal_get_pcibus_info((u64) segment, (u64) busnum,
+                                    (u64) ia64_tpa(&prom_bussoft_ptr));
+       if (status > 0)
+               return;         /*bus # does not exist */
        prom_bussoft_ptr = __va(prom_bussoft_ptr);
-       controller = sn_alloc_pci_sysdata();
-       /* controller non-zero is BUG'd in sn_alloc_pci_sysdata */
 
-       bus = pci_scan_bus(busnum, &pci_root_ops, controller);
+       controller = kcalloc(1,sizeof(struct pci_controller), GFP_KERNEL);
+       if (!controller)
+               BUG();
+
        if (bus == NULL) {
-               return;         /* error, or bus already scanned */
+               bus = pci_scan_bus(busnum, &pci_root_ops, controller);
+               if (bus == NULL)
+                       return; /* error, or bus already scanned */
+               bus->sysdata = NULL;
        }
 
+       if (bus->sysdata)
+               goto error_return; /* sysdata already alloc'd */
+
        /*
         * Per-provider fixup.  Copies the contents from prom to local
         * area and links SN_PCIBUS_BUSSOFT().
         */
 
-       if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES) {
+       if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES)
                return;         /* unsupported asic type */
-       }
+
+       if (prom_bussoft_ptr->bs_asic_type == PCIIO_ASIC_TYPE_PPB)
+               goto error_return; /* no further fixup necessary */
 
        provider = sn_pci_provider[prom_bussoft_ptr->bs_asic_type];
-       if (provider == NULL) {
+       if (provider == NULL)
                return;         /* no provider registerd for this asic */
-       }
 
        provider_soft = NULL;
-       if (provider->bus_fixup) {
+       if (provider->bus_fixup)
                provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr);
-       }
 
-       if (provider_soft == NULL) {
+       if (provider_soft == NULL)
                return;         /* fixup failed or not applicable */
-       }
 
        /*
         * Generic bus fixup goes here.  Don't reference prom_bussoft_ptr
@@ -370,12 +374,47 @@ static void sn_pci_controller_fixup(int segment, int busnum)
 
        bus->sysdata = controller;
        PCI_CONTROLLER(bus)->platform_data = provider_soft;
-
        nasid = NASID_GET(SN_PCIBUS_BUSSOFT(bus)->bs_base);
        cnode = nasid_to_cnodeid(nasid);
        hubdev_info = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo);
        SN_PCIBUS_BUSSOFT(bus)->bs_xwidget_info =
            &(hubdev_info->hdi_xwidget_info[SN_PCIBUS_BUSSOFT(bus)->bs_xid]);
+
+       return;
+
+error_return:
+
+       kfree(controller);
+       return;
+}
+
+void sn_bus_store_sysdata(struct pci_dev *dev)
+{
+       struct sysdata_el *element;
+
+       element = kcalloc(1, sizeof(struct sysdata_el), GFP_KERNEL);
+       if (!element) {
+               dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__);
+               return;
+       }
+       element->sysdata = dev->sysdata;
+       list_add(&element->entry, &sn_sysdata_list);
+}
+
+void sn_bus_free_sysdata(void)
+{
+       struct sysdata_el *element;
+       struct list_head *list;
+
+sn_sysdata_free_start:
+       list_for_each(list, &sn_sysdata_list) {
+               element = list_entry(list, struct sysdata_el, entry);
+               list_del(&element->entry);
+               kfree(element->sysdata);
+               kfree(element);
+               goto sn_sysdata_free_start;
+       }
+       return;
 }
 
 /*
@@ -413,15 +452,16 @@ static int __init sn_pci_init(void)
        ia64_max_iommu_merge_mask = ~PAGE_MASK;
        sn_fixup_ionodes();
        sn_irq_lh_init();
+       INIT_LIST_HEAD(&sn_sysdata_list);
        sn_init_cpei_timer();
 
 #ifdef CONFIG_PROC_FS
        register_sn_procfs();
 #endif
 
-       for (i = 0; i < PCI_BUSES_TO_SCAN; i++) {
-               sn_pci_controller_fixup(0, i);
-       }
+       /* busses are not known yet ... */
+       for (i = 0; i < PCI_BUSES_TO_SCAN; i++)
+               sn_pci_controller_fixup(0, i, NULL);
 
        /*
         * Generic Linux PCI Layer has created the pci_bus and pci_dev 
@@ -430,9 +470,8 @@ static int __init sn_pci_init(void)
         */
 
        while ((pci_dev =
-               pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pci_dev)) != NULL) {
+               pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_dev)) != NULL)
                sn_pci_fixup_slot(pci_dev);
-       }
 
        sn_ioif_inited = 1;     /* sn I/O infrastructure now initialized */
 
@@ -474,3 +513,8 @@ cnodeid_get_geoid(cnodeid_t cnode)
 }
 
 subsys_initcall(sn_pci_init);
+EXPORT_SYMBOL(sn_pci_fixup_slot);
+EXPORT_SYMBOL(sn_pci_unfixup_slot);
+EXPORT_SYMBOL(sn_pci_controller_fixup);
+EXPORT_SYMBOL(sn_bus_store_sysdata);
+EXPORT_SYMBOL(sn_bus_free_sysdata);
index cf4dbf9645f1d1999d00639f3f9b07872123caa8..84d276a14ecb178d696d239f0758efaff251ee47 100644 (file)
@@ -284,7 +284,6 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info)
        int cpu = nasid_slice_to_cpuid(nasid, slice);
 
        pci_dev_get(pci_dev);
-
        sn_irq_info->irq_cpuid = cpu;
        sn_irq_info->irq_pciioinfo = SN_PCIDEV_INFO(pci_dev);
 
@@ -305,15 +304,16 @@ void sn_irq_unfixup(struct pci_dev *pci_dev)
                return;
 
        sn_irq_info = SN_PCIDEV_INFO(pci_dev)->pdi_sn_irq_info;
-       if (!sn_irq_info || !sn_irq_info->irq_irq)
+       if (!sn_irq_info || !sn_irq_info->irq_irq) {
+               kfree(sn_irq_info);
                return;
+       }
 
        unregister_intr_pda(sn_irq_info);
        spin_lock(&sn_irq_info_lock);
        list_del_rcu(&sn_irq_info->list);
        spin_unlock(&sn_irq_info_lock);
        call_rcu(&sn_irq_info->rcu, sn_irq_info_free);
-
        pci_dev_put(pci_dev);
 }
 
index 9bc4de4a3ec0778aa4724e75457bd253a6b1e45e..9813da56d3113c41fb1b413cfa4c7963cda316cb 100644 (file)
 #include "xtalk/xwidgetdev.h"
 #include "xtalk/hubdev.h"
 
+int
+sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp)
+{
+       struct ia64_sal_retval ret_stuff;
+       uint64_t busnum;
+
+       ret_stuff.status = 0;
+       ret_stuff.v0 = 0;
+
+       busnum = soft->pbi_buscommon.bs_persist_busnum;
+       SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_SLOT_ENABLE, (u64) busnum,
+                       (u64) device, (u64) resp, 0, 0, 0, 0);
+
+       return (int)ret_stuff.v0;
+}
+
+int
+sal_pcibr_slot_disable(struct pcibus_info *soft, int device, int action,
+                      void *resp)
+{
+       struct ia64_sal_retval ret_stuff;
+       uint64_t busnum;
+
+       ret_stuff.status = 0;
+       ret_stuff.v0 = 0;
+
+       busnum = soft->pbi_buscommon.bs_persist_busnum;
+       SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_SLOT_DISABLE,
+                       (u64) busnum, (u64) device, (u64) action,
+                       (u64) resp, 0, 0, 0);
+
+       return (int)ret_stuff.v0;
+}
+
 static int sal_pcibr_error_interrupt(struct pcibus_info *soft)
 {
        struct ia64_sal_retval ret_stuff;
@@ -187,3 +221,6 @@ pcibr_init_provider(void)
 
        return 0;
 }
+
+EXPORT_SYMBOL_GPL(sal_pcibr_slot_enable);
+EXPORT_SYMBOL_GPL(sal_pcibr_slot_disable);
index 1a4d4ca2a4dc386d3f63189ecc9cf30f806b947e..9c4a39ee89b57b5065f575b86b2798ed31dc2fc6 100644 (file)
@@ -187,9 +187,10 @@ config HOTPLUG_PCI_RPA_DLPAR
 
 config HOTPLUG_PCI_SGI
        tristate "SGI PCI Hotplug Support"
-       depends on HOTPLUG_PCI && IA64_SGI_SN2
+       depends on HOTPLUG_PCI && (IA64_SGI_SN2 || IA64_GENERIC)
        help
-         Say Y here if you have an SGI IA64 Altix system.
+         Say Y here if you want to use the SGI Altix Hotplug
+         Driver for PCI devices.
 
          When in doubt, say N.
 
index 3e632ff8c717116d0dca075a6ec969e2b1acf31f..31a307004b94404377dd15ab5dab210831d6b63b 100644 (file)
@@ -14,6 +14,7 @@ obj-$(CONFIG_HOTPLUG_PCI_PCIE)                += pciehp.o
 obj-$(CONFIG_HOTPLUG_PCI_SHPC)         += shpchp.o
 obj-$(CONFIG_HOTPLUG_PCI_RPA)          += rpaphp.o
 obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR)    += rpadlpar_io.o
+obj-$(CONFIG_HOTPLUG_PCI_SGI)          += sgi_hotplug.o
 
 pci_hotplug-objs       :=      pci_hotplug_core.o
 
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
new file mode 100644 (file)
index 0000000..323041f
--- /dev/null
@@ -0,0 +1,611 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005 Silicon Graphics, Inc. All rights reserved.
+ *
+ * This work was based on the 2.4/2.6 kernel development by Dick Reigner.
+ * Work to add BIOS PROM support was completed by Mike Habeck.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/types.h>
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/l1.h>
+#include <asm/sn/module.h>
+#include <asm/sn/pcibr_provider.h>
+#include <asm/sn/pcibus_provider_defs.h>
+#include <asm/sn/pcidev.h>
+#include <asm/sn/sn_sal.h>
+#include <asm/sn/types.h>
+
+#include "../pci.h"
+#include "pci_hotplug.h"
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("SGI (prarit@sgi.com, dickie@sgi.com, habeck@sgi.com)");
+MODULE_DESCRIPTION("SGI Altix Hot Plug PCI Controller Driver");
+
+#define PCIIO_ASIC_TYPE_TIOCA     4
+#define PCI_SLOT_ALREADY_UP       2     /* slot already up */
+#define PCI_SLOT_ALREADY_DOWN     3     /* slot already down */
+#define PCI_L1_ERR                7     /* L1 console command error */
+#define PCI_EMPTY_33MHZ          15     /* empty 33 MHz bus */
+#define PCI_L1_QSIZE            128     /* our L1 message buffer size */
+#define SN_MAX_HP_SLOTS                 32     /* max number of hotplug slots */
+#define SGI_HOTPLUG_PROM_REV   0x0420  /* Min. required PROM version */
+
+/* internal list head */
+static struct list_head sn_hp_list;
+
+/* hotplug_slot struct's private pointer */
+struct slot {
+       int device_num;
+       struct pci_bus *pci_bus;
+       /* this struct for glue internal only */
+       struct hotplug_slot *hotplug_slot;
+       struct list_head hp_list;
+};
+
+struct pcibr_slot_enable_resp {
+       int resp_sub_errno;
+       char resp_l1_msg[PCI_L1_QSIZE + 1];
+};
+
+struct pcibr_slot_disable_resp {
+       int resp_sub_errno;
+       char resp_l1_msg[PCI_L1_QSIZE + 1];
+};
+
+enum sn_pci_req_e {
+       PCI_REQ_SLOT_ELIGIBLE,
+       PCI_REQ_SLOT_DISABLE
+};
+
+static int enable_slot(struct hotplug_slot *slot);
+static int disable_slot(struct hotplug_slot *slot);
+static int get_power_status(struct hotplug_slot *slot, u8 *value);
+
+static struct hotplug_slot_ops sn_hotplug_slot_ops = {
+       .owner                  = THIS_MODULE,
+       .enable_slot            = enable_slot,
+       .disable_slot           = disable_slot,
+       .get_power_status       = get_power_status,
+};
+
+static DECLARE_MUTEX(sn_hotplug_sem);
+
+static int sn_pci_slot_valid(struct pci_bus *pci_bus, int device)
+{
+       struct pcibus_info *pcibus_info;
+       int bricktype;
+       int bus_num;
+
+       pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
+
+       /* Check to see if this is a valid slot on 'pci_bus' */
+       if (!(pcibus_info->pbi_valid_devices & (1 << device)))
+               return -EPERM;
+
+       bricktype = MODULE_GET_BTYPE(pcibus_info->pbi_moduleid);
+       bus_num = pcibus_info->pbi_buscommon.bs_persist_busnum & 0xf;
+
+       /* Do not allow hotplug operations on base I/O cards */
+       if ((bricktype == L1_BRICKTYPE_IX ||  bricktype == L1_BRICKTYPE_IA) &&
+           (bus_num == 1 && device != 1))
+               return -EPERM;
+
+       return 1;
+}
+
+static int sn_pci_bus_valid(struct pci_bus *pci_bus)
+{
+       struct pcibus_info *pcibus_info;
+       int asic_type;
+       int bricktype;
+
+       pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
+
+       /* Don't register slots hanging off the TIOCA bus */
+       asic_type = pcibus_info->pbi_buscommon.bs_asic_type;
+       if (asic_type == PCIIO_ASIC_TYPE_TIOCA)
+               return -EPERM;
+
+       /* Only register slots in I/O Bricks that support hotplug */
+       bricktype = MODULE_GET_BTYPE(pcibus_info->pbi_moduleid);
+       switch (bricktype) {
+       case L1_BRICKTYPE_IX:
+       case L1_BRICKTYPE_PX:
+       case L1_BRICKTYPE_IA:
+       case L1_BRICKTYPE_PA:
+               return 1;
+               break;
+       default:
+               return -EPERM;
+               break;
+       }
+
+       return -EIO;
+}
+
+static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot,
+                                   struct pci_bus *pci_bus, int device)
+{
+       struct pcibus_info *pcibus_info;
+       struct slot *slot;
+
+       pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
+
+       bss_hotplug_slot->private = kcalloc(1, sizeof(struct slot),
+                                           GFP_KERNEL);
+       if (!bss_hotplug_slot->private)
+               return -ENOMEM;
+       slot = (struct slot *)bss_hotplug_slot->private;
+
+       bss_hotplug_slot->name = kmalloc(33, GFP_KERNEL);
+       if (!bss_hotplug_slot->name) {
+               kfree(bss_hotplug_slot->private);
+               return -ENOMEM;
+       }
+
+       slot->device_num = device;
+       slot->pci_bus = pci_bus;
+
+       sprintf(bss_hotplug_slot->name, "module_%c%c%c%c%.2d_b_%d_s_%d",
+               '0'+RACK_GET_CLASS(MODULE_GET_RACK(pcibus_info->pbi_moduleid)),
+               '0'+RACK_GET_GROUP(MODULE_GET_RACK(pcibus_info->pbi_moduleid)),
+               '0'+RACK_GET_NUM(MODULE_GET_RACK(pcibus_info->pbi_moduleid)),
+               MODULE_GET_BTCHAR(pcibus_info->pbi_moduleid),
+               MODULE_GET_BPOS(pcibus_info->pbi_moduleid),
+               ((int)pcibus_info->pbi_buscommon.bs_persist_busnum) & 0xf,
+               device + 1);
+
+       slot->hotplug_slot = bss_hotplug_slot;
+       list_add(&slot->hp_list, &sn_hp_list);
+
+       return 0;
+}
+
+static struct hotplug_slot * sn_hp_destroy(void)
+{
+       struct slot *slot;
+       struct list_head *list;
+       struct hotplug_slot *bss_hotplug_slot = NULL;
+
+       list_for_each(list, &sn_hp_list) {
+               slot = list_entry(list, struct slot, hp_list);
+               bss_hotplug_slot = slot->hotplug_slot;
+               list_del(&((struct slot *)bss_hotplug_slot->private)->
+                        hp_list);
+               break;
+       }
+       return bss_hotplug_slot;
+}
+
+static void sn_bus_alloc_data(struct pci_dev *dev)
+{
+       struct list_head *node;
+       struct pci_bus *subordinate_bus;
+       struct pci_dev *child;
+
+       sn_pci_fixup_slot(dev);
+
+       /* Recursively sets up the sn_irq_info structs */
+       if (dev->subordinate) {
+               subordinate_bus = dev->subordinate;
+               list_for_each(node, &subordinate_bus->devices) {
+                       child = list_entry(node, struct pci_dev, bus_list);
+                       sn_bus_alloc_data(child);
+               }
+       }
+}
+
+static void sn_bus_free_data(struct pci_dev *dev)
+{
+       struct list_head *node;
+       struct pci_bus *subordinate_bus;
+       struct pci_dev *child;
+
+       /* Recursively clean up sn_irq_info structs */
+       if (dev->subordinate) {
+               subordinate_bus = dev->subordinate;
+               list_for_each(node, &subordinate_bus->devices) {
+                       child = list_entry(node, struct pci_dev, bus_list);
+                       sn_bus_free_data(child);
+               }
+       }
+       sn_pci_unfixup_slot(dev);
+}
+
+static u8 sn_power_status_get(struct hotplug_slot *bss_hotplug_slot)
+{
+       struct slot *slot = (struct slot *)bss_hotplug_slot->private;
+       struct pcibus_info *pcibus_info;
+       u8 retval;
+
+       pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
+       retval = pcibus_info->pbi_enabled_devices & (1 << slot->device_num);
+
+       return retval ? 1 : 0;
+}
+
+static void sn_slot_mark_enable(struct hotplug_slot *bss_hotplug_slot,
+                               int device_num)
+{
+       struct slot *slot = (struct slot *)bss_hotplug_slot->private;
+       struct pcibus_info *pcibus_info;
+
+       pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
+       pcibus_info->pbi_enabled_devices |= (1 << device_num);
+}
+
+static void sn_slot_mark_disable(struct hotplug_slot *bss_hotplug_slot,
+                                int device_num)
+{
+       struct slot *slot = (struct slot *)bss_hotplug_slot->private;
+       struct pcibus_info *pcibus_info;
+
+       pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
+       pcibus_info->pbi_enabled_devices &= ~(1 << device_num);
+}
+
+static int sn_slot_enable(struct hotplug_slot *bss_hotplug_slot,
+                         int device_num)
+{
+       struct slot *slot = (struct slot *)bss_hotplug_slot->private;
+       struct pcibus_info *pcibus_info;
+       struct pcibr_slot_enable_resp resp;
+       int rc;
+
+       pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
+
+       /*
+        * Power-on and initialize the slot in the SN
+        * PCI infrastructure.
+        */
+       rc = sal_pcibr_slot_enable(pcibus_info, device_num, &resp);
+
+       if (rc == PCI_SLOT_ALREADY_UP) {
+               dev_dbg(slot->pci_bus->self, "is already active\n");
+               return -EPERM;
+       }
+
+       if (rc == PCI_L1_ERR) {
+               dev_dbg(slot->pci_bus->self,
+                       "L1 failure %d with message: %s",
+                       resp.resp_sub_errno, resp.resp_l1_msg);
+               return -EPERM;
+       }
+
+       if (rc) {
+               dev_dbg(slot->pci_bus->self,
+                       "insert failed with error %d sub-error %d\n",
+                       rc, resp.resp_sub_errno);
+               return -EIO;
+       }
+
+       sn_slot_mark_enable(bss_hotplug_slot, device_num);
+
+       return 0;
+}
+
+static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot,
+                          int device_num, int action)
+{
+       struct slot *slot = (struct slot *)bss_hotplug_slot->private;
+       struct pcibus_info *pcibus_info;
+       struct pcibr_slot_disable_resp resp;
+       int rc;
+
+       pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
+
+       rc = sal_pcibr_slot_disable(pcibus_info, device_num, action, &resp);
+
+       if (action == PCI_REQ_SLOT_ELIGIBLE && rc == PCI_SLOT_ALREADY_DOWN) {
+               dev_dbg(slot->pci_bus->self, "Slot %s already inactive\n");
+               return -ENODEV;
+       }
+
+       if (action == PCI_REQ_SLOT_ELIGIBLE && rc == PCI_EMPTY_33MHZ) {
+               dev_dbg(slot->pci_bus->self,
+                       "Cannot remove last 33MHz card\n");
+               return -EPERM;
+       }
+
+       if (action == PCI_REQ_SLOT_ELIGIBLE && rc == PCI_L1_ERR) {
+               dev_dbg(slot->pci_bus->self,
+                       "L1 failure %d with message \n%s\n",
+                       resp.resp_sub_errno, resp.resp_l1_msg);
+               return -EPERM;
+       }
+
+       if (action == PCI_REQ_SLOT_ELIGIBLE && rc) {
+               dev_dbg(slot->pci_bus->self,
+                       "remove failed with error %d sub-error %d\n",
+                       rc, resp.resp_sub_errno);
+               return -EIO;
+       }
+
+       if (action == PCI_REQ_SLOT_ELIGIBLE && !rc)
+               return 0;
+
+       if (action == PCI_REQ_SLOT_DISABLE && !rc) {
+               sn_slot_mark_disable(bss_hotplug_slot, device_num);
+               dev_dbg(slot->pci_bus->self, "remove successful\n");
+               return 0;
+       }
+
+       if (action == PCI_REQ_SLOT_DISABLE && rc) {
+               dev_dbg(slot->pci_bus->self,"remove failed rc = %d\n", rc);
+               return rc;
+       }
+
+       return rc;
+}
+
+static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
+{
+       struct slot *slot = (struct slot *)bss_hotplug_slot->private;
+       struct pci_bus *new_bus = NULL;
+       struct pci_dev *dev;
+       int func, num_funcs;
+       int new_ppb = 0;
+       int rc;
+
+       /* Serialize the Linux PCI infrastructure */
+       down(&sn_hotplug_sem);
+
+       /*
+        * Power-on and initialize the slot in the SN
+        * PCI infrastructure.
+        */
+       rc = sn_slot_enable(bss_hotplug_slot, slot->device_num);
+       if (rc) {
+               up(&sn_hotplug_sem);
+               return rc;
+       }
+
+       num_funcs = pci_scan_slot(slot->pci_bus, PCI_DEVFN(slot->device_num+1,
+                                                          PCI_FUNC(0)));
+       if (!num_funcs) {
+               dev_dbg(slot->pci_bus->self, "no device in slot\n");
+               up(&sn_hotplug_sem);
+               return -ENODEV;
+       }
+
+       sn_pci_controller_fixup(pci_domain_nr(slot->pci_bus),
+                               slot->pci_bus->number,
+                               slot->pci_bus);
+       /*
+        * Map SN resources for all functions on the card
+        * to the Linux PCI interface and tell the drivers
+        * about them.
+        */
+       for (func = 0; func < num_funcs;  func++) {
+               dev = pci_get_slot(slot->pci_bus,
+                                  PCI_DEVFN(slot->device_num + 1,
+                                            PCI_FUNC(func)));
+
+
+               if (dev) {
+                       if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+                               unsigned char sec_bus;
+                               pci_read_config_byte(dev, PCI_SECONDARY_BUS,
+                                                    &sec_bus);
+                               new_bus = pci_add_new_bus(dev->bus, dev,
+                                                         sec_bus);
+                               pci_scan_child_bus(new_bus);
+                               sn_pci_controller_fixup(pci_domain_nr(new_bus),
+                                                       new_bus->number,
+                                                       new_bus);
+                               new_ppb = 1;
+                       }
+                       sn_bus_alloc_data(dev);
+                       pci_dev_put(dev);
+               }
+       }
+
+       /* Call the driver for the new device */
+       pci_bus_add_devices(slot->pci_bus);
+       /* Call the drivers for the new devices subordinate to PPB */
+       if (new_ppb)
+               pci_bus_add_devices(new_bus);
+
+       up(&sn_hotplug_sem);
+
+       if (rc == 0)
+               dev_dbg(slot->pci_bus->self,
+                       "insert operation successful\n");
+       else
+               dev_dbg(slot->pci_bus->self,
+                       "insert operation failed rc = %d\n", rc);
+
+       return rc;
+}
+
+static int disable_slot(struct hotplug_slot *bss_hotplug_slot)
+{
+       struct slot *slot = (struct slot *)bss_hotplug_slot->private;
+       struct pci_dev *dev;
+       int func;
+       int rc;
+
+       /* Acquire update access to the bus */
+       down(&sn_hotplug_sem);
+
+       /* is it okay to bring this slot down? */
+       rc = sn_slot_disable(bss_hotplug_slot, slot->device_num,
+                            PCI_REQ_SLOT_ELIGIBLE);
+       if (rc)
+               goto leaving;
+
+       /* Free the SN resources assigned to the Linux device.*/
+       for (func = 0; func < 8;  func++) {
+               dev = pci_get_slot(slot->pci_bus,
+                                  PCI_DEVFN(slot->device_num+1,
+                                            PCI_FUNC(func)));
+               if (dev) {
+                       /*
+                        * Some drivers may use dma accesses during the
+                        * driver remove function. We release the sysdata
+                        * areas after the driver remove functions have
+                        * been called.
+                        */
+                       sn_bus_store_sysdata(dev);
+                       sn_bus_free_data(dev);
+                       pci_remove_bus_device(dev);
+                       pci_dev_put(dev);
+               }
+       }
+
+       /* free the collected sysdata pointers */
+       sn_bus_free_sysdata();
+
+       /* Deactivate slot */
+       rc = sn_slot_disable(bss_hotplug_slot, slot->device_num,
+                            PCI_REQ_SLOT_DISABLE);
+ leaving:
+       /* Release the bus lock */
+       up(&sn_hotplug_sem);
+
+       return rc;
+}
+
+static int get_power_status(struct hotplug_slot *bss_hotplug_slot, u8 *value)
+{
+       down(&sn_hotplug_sem);
+       *value = sn_power_status_get(bss_hotplug_slot);
+       up(&sn_hotplug_sem);
+       return 0;
+}
+
+static void sn_release_slot(struct hotplug_slot *bss_hotplug_slot)
+{
+       kfree(bss_hotplug_slot->info);
+       kfree(bss_hotplug_slot->name);
+       kfree(bss_hotplug_slot->private);
+       kfree(bss_hotplug_slot);
+}
+
+static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
+{
+       int device;
+       struct hotplug_slot *bss_hotplug_slot;
+       int rc = 0;
+
+       /*
+        * Currently only four devices are supported,
+        * in the future there maybe more -- up to 32.
+        */
+
+       for (device = 0; device < SN_MAX_HP_SLOTS ; device++) {
+               if (sn_pci_slot_valid(pci_bus, device) != 1)
+                       continue;
+
+               bss_hotplug_slot = kcalloc(1,sizeof(struct hotplug_slot),
+                                          GFP_KERNEL);
+               if (!bss_hotplug_slot) {
+                       rc = -ENOMEM;
+                       goto alloc_err;
+               }
+
+               bss_hotplug_slot->info =
+                       kcalloc(1,sizeof(struct hotplug_slot_info),
+                               GFP_KERNEL);
+               if (!bss_hotplug_slot->info) {
+                       rc = -ENOMEM;
+                       goto alloc_err;
+               }
+
+               if (sn_hp_slot_private_alloc(bss_hotplug_slot,
+                                            pci_bus, device)) {
+                       rc = -ENOMEM;
+                       goto alloc_err;
+               }
+
+               bss_hotplug_slot->ops = &sn_hotplug_slot_ops;
+               bss_hotplug_slot->release = &sn_release_slot;
+
+               rc = pci_hp_register(bss_hotplug_slot);
+               if (rc)
+                       goto register_err;
+       }
+       dev_dbg(pci_bus->self, "Registered bus with hotplug\n");
+       return rc;
+
+register_err:
+       dev_dbg(pci_bus->self, "bus failed to register with err = %d\n",
+               rc);
+
+alloc_err:
+       if (rc == -ENOMEM)
+               dev_dbg(pci_bus->self, "Memory allocation error\n");
+
+       /* destroy THIS element */
+       if (bss_hotplug_slot)
+               sn_release_slot(bss_hotplug_slot);
+
+       /* destroy anything else on the list */
+       while ((bss_hotplug_slot = sn_hp_destroy()))
+               pci_hp_deregister(bss_hotplug_slot);
+
+       return rc;
+}
+
+static int sn_pci_hotplug_init(void)
+{
+       struct pci_bus *pci_bus = NULL;
+       int rc;
+       int registered = 0;
+
+       INIT_LIST_HEAD(&sn_hp_list);
+
+       if (sn_sal_rev() < SGI_HOTPLUG_PROM_REV) {
+               printk(KERN_ERR "%s: PROM version must be greater than 4.05\n",
+                      __FUNCTION__);
+               return -EPERM;
+       }
+
+       while ((pci_bus = pci_find_next_bus(pci_bus))) {
+               if (!pci_bus->sysdata)
+                       continue;
+
+               rc = sn_pci_bus_valid(pci_bus);
+               if (rc != 1) {
+                       dev_dbg(pci_bus->self, "not a valid hotplug bus\n");
+                       continue;
+               }
+               dev_dbg(pci_bus->self, "valid hotplug bus\n");
+
+               rc = sn_hotplug_slot_register(pci_bus);
+               if (!rc)
+                       registered = 1;
+               else {
+                       registered = 0;
+                       break;
+               }
+       }
+
+       return registered == 1 ? 0 : -ENODEV;
+}
+
+static void sn_pci_hotplug_exit(void)
+{
+       struct hotplug_slot *bss_hotplug_slot;
+
+       while ((bss_hotplug_slot = sn_hp_destroy())) {
+               pci_hp_deregister(bss_hotplug_slot);
+       }
+
+       if (!list_empty(&sn_hp_list))
+               printk(KERN_ERR "%s: internal list is not empty\n", __FILE__);
+}
+
+module_init(sn_pci_hotplug_init);
+module_exit(sn_pci_hotplug_exit);
index cbb4604c934902fc7f69f022a4f3ccc4922df270..2299c3ad2e3336dadbe87ab52f3c1dcc239f9150 100644 (file)
@@ -151,4 +151,8 @@ extern void                 pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info);
 extern int             pcibr_ate_alloc(struct pcibus_info *, int);
 extern void            pcibr_ate_free(struct pcibus_info *, int);
 extern void            ate_write(struct pcibus_info *, int, int, uint64_t);
+extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device,
+                                void *resp);
+extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device,
+                                 int action, void *resp);
 #endif
index 9610fcc635450e57bf9be693fb8fa5e22eb60be1..49711d00ad04f77d90467daf33bfd13d549e2109 100644 (file)
@@ -23,6 +23,8 @@
 #define SN_PCIBUS_BUSSOFT(pci_bus) \
         ((struct pcibus_bussoft *)(PCI_CONTROLLER((pci_bus))->platform_data))
 
+#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \
+       (struct pcibus_info *)((struct pcibus_bussoft *)(PCI_CONTROLLER((pci_bus))->platform_data))
 /*
  * Given a struct pci_dev, return the sn pcibus_bussoft struct.  Note
  * that this is not equivalent to SN_PCIBUS_BUSSOFT(pci_dev->bus) due
@@ -56,6 +58,10 @@ struct pcidev_info {
 extern void sn_irq_fixup(struct pci_dev *pci_dev,
                         struct sn_irq_info *sn_irq_info);
 extern void sn_irq_unfixup(struct pci_dev *pci_dev);
+extern void sn_pci_controller_fixup(int segment, int busnum,
+                                   struct pci_bus *bus);
+extern void sn_bus_store_sysdata(struct pci_dev *dev);
+extern void sn_bus_free_sysdata(void);
 extern void sn_pci_fixup_slot(struct pci_dev *dev);
 extern void sn_pci_unfixup_slot(struct pci_dev *dev);
 extern void sn_irq_lh_init(void);