The iseries has a bar graph on the front panel that shows how busy it is.
The operating system sets and clears a bit in the CTRL register to control
it.
Instead of going to the complexity of using a thread info bit, just set and
clear it in the idle loop.
Also create two helper functions, ppc64_runlatch_on and ppc64_runlatch_off.
Finally don't use the short form of the SPR defines.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
REST_8GPRS(14, r1)
REST_10GPRS(22, r1)
-#ifdef CONFIG_PPC_ISERIES
- clrrdi r7,r1,THREAD_SHIFT /* get current_thread_info() */
- ld r7,TI_FLAGS(r7) /* Get run light flag */
- mfspr r9,CTRLF
- srdi r7,r7,TIF_RUN_LIGHT
- insrdi r9,r7,1,63 /* Insert run light into CTRL */
- mtspr CTRLT,r9
-#endif
-
/* convert old thread to its task_struct for return value */
addi r3,r3,-THREAD
ld r7,_NIP(r1) /* Return to _switch caller in new task */
lhz r24,PACAPACAINDEX(r13) /* Get processor # */
cmpwi 0,r24,0 /* Are we processor 0? */
beq .__start_initialization_iSeries /* Start up the first processor */
- mfspr r4,CTRLF
- li r5,RUNLATCH /* Turn off the run light */
+ mfspr r4,SPRN_CTRLF
+ li r5,CTRL_RUNLATCH /* Turn off the run light */
andc r4,r4,r5
- mtspr CTRLT,r4
+ mtspr SPRN_CTRLT,r4
1:
HMT_LOW
mfspr r4, HID0
ori r4, r4, 0x1
mtspr HID0, r4
- mfspr r4, CTRLF
+ mfspr r4, SPRN_CTRLF
oris r4, r4, 0x40
- mtspr CTRLT, r4
+ mtspr SPRN_CTRLT, r4
blr
#endif
{
struct paca_struct *lpaca;
long oldval;
- unsigned long CTRL;
/* ensure iSeries run light will be out when idle */
- clear_thread_flag(TIF_RUN_LIGHT);
- CTRL = mfspr(CTRLF);
- CTRL &= ~RUNLATCH;
- mtspr(CTRLT, CTRL);
+ ppc64_runlatch_off();
lpaca = get_paca();
}
}
+ ppc64_runlatch_on();
schedule();
+ ppc64_runlatch_off();
}
return 0;
childregs->gpr[1] = sp + sizeof(struct pt_regs);
p->thread.regs = NULL; /* no user register state */
clear_ti_thread_flag(p->thread_info, TIF_32BIT);
-#ifdef CONFIG_PPC_ISERIES
- set_ti_thread_flag(p->thread_info, TIF_RUN_LIGHT);
-#endif
} else {
childregs->gpr[1] = usp;
p->thread.regs = childregs;
#ifdef CONFIG_PPC_PSERIES
unsigned long set, reset;
int ret;
- unsigned int ctrl;
#endif /* CONFIG_PPC_PSERIES */
/* Only need to enable them once */
* On SMT machines we have to set the run latch in the ctrl register
* in order to make PMC6 spin.
*/
- if (cpu_has_feature(CPU_FTR_SMT)) {
- ctrl = mfspr(CTRLF);
- ctrl |= RUNLATCH;
- mtspr(CTRLT, ctrl);
- }
+ if (cpu_has_feature(CPU_FTR_SMT))
+ ppc64_runlatch_on();
#endif /* CONFIG_PPC_PSERIES */
}
#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
#define SPRN_XER 0x001 /* Fixed Point Exception Register */
#define SPRN_VRSAVE 0x100 /* Vector save */
+#define SPRN_CTRLF 0x088
+#define SPRN_CTRLT 0x098
+#define CTRL_RUNLATCH 0x1
/* Performance monitor SPRs */
#define SPRN_SIAR 780
#define XGLUE(a,b) a##b
#define GLUE(a,b) XGLUE(a,b)
-/* iSeries CTRL register (for runlatch) */
-
-#define CTRLT 0x098
-#define CTRLF 0x088
-#define RUNLATCH 0x0001
-
#ifdef __ASSEMBLY__
#define _GLOBAL(name) \
#define HAVE_ARCH_PICK_MMAP_LAYOUT
+static inline void ppc64_runlatch_on(void)
+{
+ unsigned long ctrl;
+
+ ctrl = mfspr(SPRN_CTRLF);
+ ctrl |= CTRL_RUNLATCH;
+ mtspr(SPRN_CTRLT, ctrl);
+}
+
+static inline void ppc64_runlatch_off(void)
+{
+ unsigned long ctrl;
+
+ ctrl = mfspr(SPRN_CTRLF);
+ ctrl &= ~CTRL_RUNLATCH;
+ mtspr(SPRN_CTRLT, ctrl);
+}
+
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
#define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling
TIF_NEED_RESCHED */
#define TIF_32BIT 5 /* 32 bit binary */
-#define TIF_RUN_LIGHT 6 /* iSeries run light */
+/* #define SPARE 6 */
#define TIF_ABI_PENDING 7 /* 32/64 bit switch needed */
#define TIF_SYSCALL_AUDIT 8 /* syscall auditing active */
#define TIF_SINGLESTEP 9 /* singlestepping active */
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_32BIT (1<<TIF_32BIT)
-#define _TIF_RUN_LIGHT (1<<TIF_RUN_LIGHT)
+/* #define _SPARE (1<<SPARE) */
#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)