[MIPS] Ocelot G: Fix build error and numerous warnings.

The cause of the build errors was a 64-bit kernel being configured in
ocelot_g_defconfig without the code being 64-bit proof.  Fixed for now
by limiting 64-bit selection to SYS_SUPPORTS_64BIT_KERNEL if BROKEN.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 9c92b491733f02003929f7ebb22e87af56b8720b..74ba7637811346c479ea3902016060afede53405 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -408,7 +408,7 @@ config MOMENCO_OCELOT_C
        select SWAP_IO_SPACE
        select SYS_HAS_CPU_RM7000
        select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_64BIT_KERNEL
+       select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
        select SYS_SUPPORTS_BIG_ENDIAN
        help
          The Ocelot is a MIPS-based Single Board Computer (SBC) made by

diff --git a/arch/mips/momentum/ocelot_g/ocelot_pld.h b/arch/mips/momentum/ocelot_g/ocelot_pld.h
index fcb8275e219dc74d833fd041e07e7fd53b9e3d28..95e0534026d0756bfb99de5d4c2595538f01a05c 100644 (file)
--- a/arch/mips/momentum/ocelot_g/ocelot_pld.h
+++ b/arch/mips/momentum/ocelot_g/ocelot_pld.h
@@ -23,8 +23,8 @@
 #define OCELOT_REG_INTSET (12)
 #define OCELOT_REG_INTCLR (13)
 
-#define OCELOT_PLD_WRITE(x, y) writeb(x, OCELOT_CS0_ADDR + OCELOT_REG_##y)
-#define OCELOT_PLD_READ(x) readb(OCELOT_CS0_ADDR + OCELOT_REG_##x)
-
+#define __PLD_REG_TO_ADDR(reg) ((void *) OCELOT_CS0_ADDR + OCELOT_REG_##reg)
+#define OCELOT_PLD_WRITE(x, reg) writeb(x, __PLD_REG_TO_ADDR(reg))
+#define OCELOT_PLD_READ(reg) readb(__PLD_REG_TO_ADDR(reg))
 
 #endif /* __MOMENCO_OCELOT_PLD_H__ */

diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c
index 56ec47039c16b3cfe742d500d528baadb5c35aa3..d288f7b018426260a114fc240fa3083a7899b5fc 100644 (file)
--- a/arch/mips/momentum/ocelot_g/setup.c
+++ b/arch/mips/momentum/ocelot_g/setup.c
@@ -57,6 +57,7 @@
 #include <asm/gt64240.h>
 #include <asm/irq.h>
 #include <asm/pci.h>
+#include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/reboot.h>
 #include <linux/bootmem.h>
@@ -160,6 +161,10 @@ static void __init setup_l3cache(unsigned long size)
        printk("Done\n");
 }
 
+void __init plat_timer_setup(struct irqaction *irq)
+{
+}
+
 void __init plat_mem_setup(void)
 {
        void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache);