# Revision 1.38 1998/03/23 14:03:55 ftplinux
# In an upload failure message, say explicitly that the job will be
# retried, to avoid confusion of users.
-# $failure_file was put on @keep_list only for first retry.
+# $failure_file was put on @keep_list only for first retry.
# If the daemon removes a .changes, set SGID bit on all files associated
# with it, so that the test for Debian files without a .changes doesn't
# find them.
$junk = $conf::ar;
$junk = $conf::gzip;
$junk = $conf::cp;
-#$junk = $conf::ls;
+$junk = $conf::ls;
$junk = $conf::chmod;
$junk = $conf::ftpdebug;
$junk = $conf::ftptimeout;
$junk = @conf::nonus_packages;
$junk = @conf::test_binaries;
$junk = @conf::maintainer_mail;
-$junk = @conf::targetdir_delayed;
$junk = $conf::mail ||= '/usr/sbin/sendmail';
$conf::target = "localhost" if $conf::upload_method eq "copy";
package main;
}
# test for another instance of the queued already running
-my ($pid, $delayed_dirs, $adelayedcore);
+my $pid;
if (open( PIDFILE, "<$conf::pidfile" )) {
chomp( $pid = <PIDFILE> );
close( PIDFILE );
unlink( "$conf::incoming/core" );
print "(Removed core file)\n";
}
- for ($delayed_dirs = 0; $delayed_dirs <= $conf::max_delayed;
- $delayed_dirs++) {
- $adelayedcore = sprintf( "$conf::incoming_delayed/core",
- $delayed_dirs );
- if (-e $adelayedcore) {
- unlink( $adelayedcore );
- print "(Removed core file)\n";
- }
- }
exit 0 if $main::arg eq "kill";
}
else {
die "No keyrings\n" if ! @conf::keyrings;
}
-die "statusfile path must be absolute."
- if $conf::statusfile !~ m,^/,;
-die "upload and target queue paths must be absolute."
- if $conf::incoming !~ m,^/, ||
- $conf::incoming_delayed !~ m,^/, ||
- $conf::targetdir !~ m,^/, ||
- $conf::targetdir_delayed !~ m,^/,;
-
# ---------------------------------------------------------------------------
# initializations
# prototypes
sub calc_delta();
sub check_dir();
-sub get_filelist_from_known_good_changes($);
-sub age_delayed_queues();
sub process_changes($\@);
sub process_commands($);
-sub age_delayed_queues();
-sub is_on_target($\@);
+sub is_on_target($);
sub copy_to_target(@);
sub pgp_check($);
sub check_alive(;$);
# the mainloop
# ---------------------------------------------------------------------------
-# default to classical incoming/target
-$main::current_incoming = $conf::incoming;
-$main::current_targetdir = $conf::targetdir;
-
$main::dstat = "i";
write_status_file() if $conf::statusdelay;
while( 1 ) {
# ping target only if there is the possibility that we'll contact it (but
# also don't wait too long).
my @have_changes = <*.changes *.commands>;
- for ( my $delayed_dirs = 0; $delayed_dirs <= $conf::max_delayed;
- $delayed_dirs++) {
- my $adelayeddir = sprintf( "$conf::incoming_delayed",
- $delayed_dirs );
- push( @have_changes,
- <$adelayeddir/*.changes> );
- }
check_alive() if @have_changes || (time - $main::last_ping_time) > 8*60*60;
if (@have_changes && $main::target_up) {
$main::dstat = "i";
write_status_file() if $conf::statusdelay;
- if ($conf::upload_method eq "copy") {
- age_delayed_queues();
- }
-
# sleep() returns if we received a signal (SIGUSR1 for status FIFO), so
# calculate the end time once and wait for it being reached.
format_status_num( $main::next_run, time + $conf::queue_delay );
# main function for checking the incoming dir
#
sub check_dir() {
- my( @files, @changes, @keep_files, @this_keep_files, @stats, $file ,
- $adelay );
+ my( @files, @changes, @keep_files, @this_keep_files, @stats, $file );
debug( "starting checkdir" );
$main::dstat = "c";
msg( "log", "binary test failed for $_; delaying queue run\n");
goto end_run;
}
-
- for ( $adelay=-1; $adelay <= $conf::max_delayed; $adelay++ ) {
- if ( $adelay == -1 ) {
- $main::current_incoming = $conf::incoming;
- $main::current_incoming_short = "";
- $main::current_targetdir = $conf::targetdir;
- }
- else {
- $main::current_incoming = sprintf( $conf::incoming_delayed,
- $adelay );
- $main::current_incoming_short = sprintf( "DELAYED/%d-day",
- $adelay );
- $main::current_targetdir = sprintf( $conf::targetdir_delayed,
- $adelay );
- }
-
- # need to clear directory specific variables
- undef ( @keep_files );
- undef ( @this_keep_files );
-
- chdir ( $main::current_incoming )
- or (msg( "log",
- "Cannot change to dir ".
- "${main::current_incoming_short}: $!\n" ),
- return);
-
- # look for *.commands files but not in delayed queues
- if ( $adelay==-1 ) {
- foreach $file ( <*.commands> ) {
- init_mail( $file );
- block_signals();
- process_commands( $file );
- unblock_signals();
- $main::dstat = "c";
- write_status_file() if $conf::statusdelay;
- finish_mail();
- }
- }
- opendir( INC, "." )
- or (msg( "log", "Cannot open dir ${main::current_incoming_short}: $!\n" ),
- return);
- @files = readdir( INC );
- closedir( INC );
-
- # process all .changes files found
- @changes = grep /\.changes$/, @files;
- push( @keep_files, @changes ); # .changes files aren't stray
- foreach $file ( @changes ) {
- init_mail( $file );
- # wrap in an eval to allow jumpbacks to here with die in case
- # of errors
- block_signals();
- eval { process_changes( $file, @this_keep_files ); };
- unblock_signals();
- msg( "log,mail", $@ ) if $@;
- $main::dstat = "c";
- write_status_file() if $conf::statusdelay;
+
+ # look for *.commands files
+ foreach $file ( <*.commands> ) {
+ init_mail( $file );
+ block_signals();
+ process_commands( $file );
+ unblock_signals();
+ $main::dstat = "c";
+ write_status_file() if $conf::statusdelay;
+ finish_mail();
+ }
+
+ opendir( INC, "." )
+ or (msg( "log", "Cannot open incoming dir $conf::incoming: $!\n" ),
+ return);
+ @files = readdir( INC );
+ closedir( INC );
+
+ # process all .changes files found
+ @changes = grep /\.changes$/, @files;
+ push( @keep_files, @changes ); # .changes files aren't stray
+ foreach $file ( @changes ) {
+ init_mail( $file );
+ # wrap in an eval to allow jumpbacks to here with die in case
+ # of errors
+ block_signals();
+ eval { process_changes( $file, @this_keep_files ); };
+ unblock_signals();
+ msg( "log,mail", $@ ) if $@;
+ $main::dstat = "c";
+ write_status_file() if $conf::statusdelay;
- # files which are ok in conjunction with this .changes
- debug( "$file tells to keep @this_keep_files" );
- push( @keep_files, @this_keep_files );
- finish_mail();
+ # files which are ok in conjunction with this .changes
+ debug( "$file tells to keep @this_keep_files" );
+ push( @keep_files, @this_keep_files );
+ finish_mail();
- # break out of this loop if the incoming dir has become unwritable
- goto end_run if !$main::incoming_writable;
- }
- ftp_close() if $conf::upload_method eq "ftp";
+ # break out of this loop if the incoming dir has become unwritable
+ goto end_run if !$main::incoming_writable;
+ }
+ ftp_close() if $conf::upload_method eq "ftp";
- # find files which aren't related to any .changes
- foreach $file ( @files ) {
- # filter out files we never want to delete
- next if ! -f $file || # may have disappeared in the meantime
+ # find files which aren't related to any .changes
+ foreach $file ( @files ) {
+ # filter out files we never want to delete
+ next if ! -f $file || # may have disappeared in the meantime
$file eq "." || $file eq ".." ||
(grep { $_ eq $file } @keep_files) ||
$file =~ /$conf::keep_files/;
- # Delete such files if they're older than
- # $stray_remove_timeout; they could be part of an
- # yet-incomplete upload, with the .changes still missing.
- # Cannot send any notification, since owner unknown.
- next if !(@stats = stat( $file ));
- my $age = time - $stats[ST_MTIME];
- my( $maint, $pattern, @job_files );
- if ($file =~ /^junk-for-writable-test/ ||
- $file !~ m,$conf::valid_files, ||
- $age >= $conf::stray_remove_timeout) {
- msg( "log", "Deleted stray file ${main::current_incoming_short}/$file\n" ) if rm( $file );
+ # Delete such files if they're older than
+ # $stray_remove_timeout; they could be part of an
+ # yet-incomplete upload, with the .changes still missing.
+ # Cannot send any notification, since owner unknown.
+ next if !(@stats = stat( $file ));
+ my $age = time - $stats[ST_MTIME];
+ my( $maint, $pattern, @job_files );
+ if ($file =~ /^junk-for-writable-test/ ||
+ $file !~ m,$conf::valid_files, ||
+ $age >= $conf::stray_remove_timeout) {
+ msg( "log", "Deleted stray file $file\n" ) if rm( $file );
+ }
+ elsif ($age > $conf::no_changes_timeout &&
+ is_debian_file( $file ) &&
+ # not already reported
+ !($stats[ST_MODE] & S_ISGID) &&
+ ($pattern = debian_file_stem( $file )) &&
+ (@job_files = glob($pattern)) &&
+ # If a .changes is in the list, it has the same stem as the
+ # found file (probably a .orig.tar.gz). Don't report in this
+ # case.
+ !(grep( /\.changes$/, @job_files ))) {
+ $maint = get_maintainer( $file );
+ # Don't send a mail if this looks like the recompilation of a
+ # package for a non-i386 arch. For those, the maintainer field is
+ # useless :-(
+ if (!grep( /(\.dsc|_(i386|all)\.deb)$/, @job_files )) {
+ msg( "log", "Found an upload without .changes and with no ",
+ ".dsc file\n" );
+ msg( "log", "Not sending a report, because probably ",
+ "recompilation job\n" );
}
- elsif ($age > $conf::no_changes_timeout &&
- is_debian_file( $file ) &&
- # not already reported
- !($stats[ST_MODE] & S_ISGID) &&
- ($pattern = debian_file_stem( $file )) &&
- (@job_files = glob($pattern)) &&
- # If a .changes is in the list, it has the same stem as the
- # found file (probably a .orig.tar.gz). Don't report in this
- # case.
- !(grep( /\.changes$/, @job_files ))) {
- $maint = get_maintainer( $file );
- # Don't send a mail if this looks like the recompilation of a
- # package for a non-i386 arch. For those, the maintainer field is
- # useless :-(
- if (!grep( /(\.dsc|_(i386|all)\.deb)$/, @job_files )) {
- msg( "log", "Found an upload without .changes and with no ",
- ".dsc file\n" );
- msg( "log", "Not sending a report, because probably ",
- "recompilation job\n" );
- }
- elsif ($maint) {
- init_mail();
- $main::mail_addr = $maint;
- $main::mail_addr = $1 if $main::mail_addr =~ /<([^>]*)>/;
- $main::mail_subject = "Incomplete upload found in ".
- "Debian upload queue";
- msg( "mail", "Probably you are the uploader of the following ".
- "file(s) in\n" );
- msg( "mail", "the Debian upload queue directory:\n " );
- msg( "mail", join( "\n ", @job_files ), "\n" );
- msg( "mail", "This looks like an upload, but a .changes file ".
- "is missing, so the job\n" );
- msg( "mail", "cannot be processed.\n\n" );
- msg( "mail", "If no .changes file arrives within ",
- print_time( $conf::stray_remove_timeout - $age ),
- ", the files will be deleted.\n\n" );
- msg( "mail", "If you didn't upload those files, please just ".
- "ignore this message.\n" );
- finish_mail();
- msg( "log", "Sending problem report for an upload without a ".
- ".changes\n" );
- msg( "log", "Maintainer: $maint\n" );
- }
- else {
- msg( "log", "Found an upload without .changes, but can't ".
- "find a maintainer address\n" );
- }
- msg( "log", "Files: @job_files\n" );
- # remember we already have sent a mail regarding this file
- foreach ( @job_files ) {
- my @st = stat($_);
- next if !@st; # file may have disappeared in the meantime
- chmod +($st[ST_MODE] |= S_ISGID), $_;
- }
+ elsif ($maint) {
+ init_mail();
+ $main::mail_addr = $maint;
+ $main::mail_addr = $1 if $main::mail_addr =~ /<([^>]*)>/;
+ $main::mail_subject = "Incomplete upload found in ".
+ "Debian upload queue";
+ msg( "mail", "Probably you are the uploader of the following ".
+ "file(s) in\n" );
+ msg( "mail", "the Debian upload queue directory:\n " );
+ msg( "mail", join( "\n ", @job_files ), "\n" );
+ msg( "mail", "This looks like an upload, but a .changes file ".
+ "is missing, so the job\n" );
+ msg( "mail", "cannot be processed.\n\n" );
+ msg( "mail", "If no .changes file arrives within ",
+ print_time( $conf::stray_remove_timeout - $age ),
+ ", the files will be deleted.\n\n" );
+ msg( "mail", "If you didn't upload those files, please just ".
+ "ignore this message.\n" );
+ finish_mail();
+ msg( "log", "Sending problem report for an upload without a ".
+ ".changes\n" );
+ msg( "log", "Maintainer: $maint\n" );
}
else {
- debug( "found stray file ${main::current_incoming_short}/$file, deleting in ",
- print_time($conf::stray_remove_timeout - $age) );
+ msg( "log", "Found an upload without .changes, but can't ".
+ "find a maintainer address\n" );
+ }
+ msg( "log", "Files: @job_files\n" );
+ # remember we already have sent a mail regarding this file
+ foreach ( @job_files ) {
+ my @st = stat($_);
+ next if !@st; # file may have disappeared in the meantime
+ chmod +($st[ST_MODE] |= S_ISGID), $_;
}
}
+ else {
+ debug( "found stray file $file, deleting in ",
+ print_time($conf::stray_remove_timeout - $age) );
+ }
}
- chdir( $conf::incoming );
end_run:
$main::dstat = "i";
write_status_file() if $conf::statusdelay;
}
-sub get_filelist_from_known_good_changes($) {
- my $changes = shift;
-
- local( *CHANGES );
- my(@filenames);
-
- # parse the .changes file
- open( CHANGES, "<$changes" )
- or die "$changes: $!\n";
- outer_loop: while( <CHANGES> ) {
- if (/^Files:/i) {
- while( <CHANGES> ) {
- redo outer_loop if !/^\s/;
- my @field = split( /\s+/ );
- next if @field != 6;
- # forbid shell meta chars in the name, we pass it to a
- # subshell several times...
- $field[5] =~ /^([a-zA-Z0-9.+_:@=%-][~a-zA-Z0-9.+_:@=%-]*)/;
- if ($1 ne $field[5]) {
- msg( "log", "found suspicious filename $field[5]\n" );
- next;
- }
- push( @filenames, $field[5] );
- }
- }
- }
- close( CHANGES );
- return @filenames;
-}
-
#
# process one .changes file
#
local( *CHANGES );
local( *FAILS );
- format_status_str( $main::current_changes, "$main::current_incoming_short/$changes" );
+ format_status_str( $main::current_changes, $changes );
$main::dstat = "c";
write_status_file() if $conf::statusdelay;
@$keep_list = ();
- msg( "log", "processing ${main::current_incoming_short}/$changes\n" );
+ msg( "log", "processing $changes\n" );
# parse the .changes file
open( CHANGES, "<$changes" )
- or die "Cannot open ${main::current_incoming_short}/$changes: $!\n";
+ or die "Cannot open $changes: $!\n";
$pgplines = 0;
$main::mail_addr = "";
@files = ();
$field[5] =~ /^([a-zA-Z0-9.+_:@=%-][~a-zA-Z0-9.+_:@=%-]*)/;
if ($1 ne $field[5]) {
msg( "log", "found suspicious filename $field[5]\n" );
- msg( "mail", "File '$field[5]' mentioned in $main::current_incoming_short/$changes\n",
+ msg( "mail", "File '$field[5]' mentioned in $changes\n",
"has bad characters in its name. Removed.\n" );
rm( $field[5] );
next;
# some consistency checks
if (!$main::mail_addr) {
- msg( "log,mail", "$main::current_incoming_short/$changes doesn't contain a Maintainer: field; ".
+ msg( "log,mail", "$changes doesn't contain a Maintainer: field; ".
"cannot process\n" );
goto remove_only_changes;
}
# not found or not unique: hold the job and inform queue maintainer
my $old_addr = $main::mail_addr;
$main::mail_addr = $conf::maintainer_mail;
- msg( "mail", "The job ${main::current_incoming_short}/$changes doesn't have a correct email\n" );
- msg( "mail", "address in the Maintainer: field:\n" );
+ msg( "mail", "The job $changes doesn't have a correct email\n" );
+ msg( "mail", "address in the Maintainer: field:\n" );
msg( "mail", " $old_addr\n" );
msg( "mail", "A check for this in the Debian keyring gave:\n" );
msg( "mail", @addr_list ?
" " . join( ", ", @addr_list ) . "\n" :
" nothing\n" );
msg( "mail", "Please fix this manually\n" );
- msg( "log", "Bad Maintainer: field in ${main::current_incoming_short}/$changes: $old_addr\n" );
+ msg( "log", "Bad Maintainer: field in $changes: $old_addr\n" );
goto remove_only_changes;
}
}
if ($pgplines < 3) {
- msg( "log,mail", "$main::current_incoming_short/$changes isn't signed with PGP/GnuPG\n" );
+ msg( "log,mail", "$changes isn't signed with PGP/GnuPG\n" );
msg( "log", "(uploader $main::mail_addr)\n" );
goto remove_only_changes;
}
if (!@files) {
- msg( "log,mail", "$main::current_incoming_short/$changes doesn't mention any files\n" );
+ msg( "log,mail", "$changes doesn't mention any files\n" );
msg( "log", "(uploader $main::mail_addr)\n" );
goto remove_only_changes;
}
$retries = $last_retry = 0;
if (-f $failure_file) {
open( FAILS, "<$failure_file" )
- or die "Cannot open $main::current_incoming_short/$failure_file: $!\n";
+ or die "Cannot open $failure_file: $!\n";
my $line = <FAILS>;
close( FAILS );
( $retries, $last_retry ) = ( $1, $2 ) if $line =~ /^(\d+)\s+(\d+)$/;
# run PGP on the file to check the signature
if (!($signator = pgp_check( $changes ))) {
- msg( "log,mail", "$main::current_incoming_short/$changes has bad PGP/GnuPG signature!\n" );
+ msg( "log,mail", "$changes has bad PGP/GnuPG signature!\n" );
msg( "log", "(uploader $main::mail_addr)\n" );
remove_only_changes:
- msg( "log,mail", "Removing $main::current_incoming_short/$changes, but keeping its associated ",
+ msg( "log,mail", "Removing $changes, but keeping its associated ",
"files for now.\n" );
rm( $changes );
# Set SGID bit on associated files, so that the test for Debian files
elsif ($signator eq "LOCAL ERROR") {
# An error has appened when starting pgp... Don't process the file,
# but also don't delete it
- debug( "Can't PGP/GnuPG check $main::current_incoming_short/$changes -- don't process it for now" );
+ debug( "Can't PGP/GnuPG check $changes -- don't process it for now" );
return;
}
- die "Cannot stat ${main::current_incoming_short}/$changes (??): $!\n"
+ die "Cannot stat $changes (??): $!\n"
if !(@changes_stats = stat( $changes ));
# Make $upload_time the maximum of all modification times of files
# related to this .changes (and the .changes it self). This is the
# if a .changes fails for a really long time (several days
# or so), remove it and all associated files
msg( "log,mail",
- "$main::current_incoming_short/$changes couldn't be processed for ",
+ "$changes couldn't be processed for ",
int($conf::bad_changes_timeout/(60*60)),
" hours and is now deleted\n" );
msg( "log,mail",
# check if the job is already present on target
# (moved to here, to avoid bothering target as long as there are errors in
# the job)
- if ($ls_l = is_on_target( $changes, @filenames )) {
- msg( "log,mail", "$main::current_incoming_short/$changes is already present on target host:\n" );
+ if ($ls_l = is_on_target( $changes )) {
+ msg( "log,mail", "$changes is already present on target host:\n" );
msg( "log,mail", "$ls_l\n" );
msg( "mail", "Either you already uploaded it, or someone else ",
"came first.\n" );
my $commands = shift;
my( @cmds, $cmd, $pgplines, $signator );
local( *COMMANDS );
- my( @files, $file, @removed, $target_delay );
format_status_str( $main::current_changes, $commands );
$main::dstat = "c";
write_status_file() if $conf::statusdelay;
- msg( "log", "processing $main::current_incoming_short/$commands\n" );
+ msg( "log", "processing $commands\n" );
# parse the .commands file
if (!open( COMMANDS, "<$commands" )) {
- msg( "log", "Cannot open $main::current_incoming_short/$commands: $!\n" );
+ msg( "log", "Cannot open $commands: $!\n" );
return;
}
$pgplines = 0;
# some consistency checks
if (!$main::mail_addr || $main::mail_addr !~ /^\S+\@\S+\.\S+/) {
- msg( "log,mail", "$main::current_incoming_short/$commands contains no or bad Uploader: field: ".
+ msg( "log,mail", "$commands contains no or bad Uploader: field: ".
"$main::mail_addr\n" );
- msg( "log,mail", "cannot process $main::current_incoming_short/$commands\n" );
+ msg( "log,mail", "cannot process $commands\n" );
$main::mail_addr = "";
goto remove;
}
msg( "log", "(command uploader $main::mail_addr)\n" );
if ($pgplines < 3) {
- msg( "log,mail", "$main::current_incoming_short/$commands isn't signed with PGP/GnuPG\n" );
+ msg( "log,mail", "$commands isn't signed with PGP/GnuPG\n" );
msg( "mail", "or the uploaded file is broken. Make sure to transfer in binary mode\n" );
msg( "mail", "or better yet - use dcut for commands files\n");
goto remove;
# run PGP on the file to check the signature
if (!($signator = pgp_check( $commands ))) {
- msg( "log,mail", "$main::current_incoming_short/$commands has bad PGP/GnuPG signature!\n" );
+ msg( "log,mail", "$commands has bad PGP/GnuPG signature!\n" );
remove:
- msg( "log,mail", "Removing $main::current_incoming_short/$commands\n" );
+ msg( "log,mail", "Removing $commands\n" );
rm( $commands );
return;
}
elsif ($signator eq "LOCAL ERROR") {
# An error has appened when starting pgp... Don't process the file,
# but also don't delete it
- debug( "Can't PGP/GnuPG check $main::current_incoming_short/$commands -- don't process it for now" );
+ debug( "Can't PGP/GnuPG check $commands -- don't process it for now" );
return;
}
msg( "log", "(PGP/GnuPG signature by $signator)\n" );
# now process commands
- msg( "mail", "Log of processing your commands file $main::current_incoming_short/$commands:\n\n" );
+ msg( "mail", "Log of processing your commands file $commands:\n\n" );
foreach $cmd ( @cmds ) {
my @word = split( /\s+/, $cmd );
msg( "mail,log", "> @word\n" );
next if @word < 1;
if ($word[0] eq "rm") {
+ my( @files, $file, @removed );
foreach ( @word[1..$#word] ) {
if (m,/,) {
msg( "mail,log", "$_: filename may not contain slashes\n" );
}
elsif (/[*?[]/) {
- # process wildcards but also plain names (for delayed target removal)
- my (@thesefiles);
+ # process wildcards
my $pat = quotemeta($_);
$pat =~ s/\\\*/.*/g;
$pat =~ s/\\\?/.?/g;
$pat =~ s/\\([][])/$1/g;
opendir( DIR, "." );
- push (@thesefiles, grep /^$pat$/, readdir(DIR) );
+ push( @files, grep /^$pat$/, readdir(DIR) );
closedir( DIR );
- for ( my($adelay)=0; (! @thesefiles) && $adelay <= $conf::max_delayed; $adelay++ ) {
- my($dir) = sprintf( $conf::incoming_delayed,
- $adelay );
- opendir( DIR, "$dir" );
- push( @thesefiles, map ("$dir/$_", grep /^$pat$/, readdir(DIR) ));
- closedir( DIR );
- }
- push (@files, @thesefiles);
- if (! @thesefiles) {
- msg( "mail,log", "$_ did not match anything\n" );
- }
}
else {
- my (@thesefiles);
- $file = $_;
- if (-f $file) {
- push (@thesefiles, $file);
- }
- for ( my($adelay)=0; $adelay <= $conf::max_delayed; $adelay++ ) {
- my($dir) = sprintf( $conf::incoming_delayed, $adelay );
- if (-f "$dir/$file") {
- push (@thesefiles, "$dir/$file");
- }
- }
- if ($file =~ m/\.changes$/ && $conf::upload_method eq "copy") {
- for ( my($adelay)=0; $adelay <= $conf::max_delayed; $adelay++ ) {
- my($dir) = sprintf( "$conf::targetdir_delayed",$adelay );
- if (-f "$dir/$file") {
- push (@thesefiles, "$dir/$file");
- push (@thesefiles, map( "$dir/$_",get_filelist_from_known_good_changes("$dir/$file")));
- }
- }
- }
- if (!@thesefiles) {
- msg( "mail,log", "No file found: $file\n" );
- }
- push (@files, @thesefiles);
+ push( @files, $_ );
}
}
if (!@files) {
if (@word != 3) {
msg( "mail,log", "Wrong number of arguments\n" );
}
- elsif ($word[1] =~ m,/, || $word[1] !~ m/\.changes/) {
+ elsif ($word[1] =~ m,/,) {
msg( "mail,log", "$word[1]: filename may not contain slashes\n" );
}
- elsif (! (($target_delay) = $word[2] =~ m,^([0-9]+)-day$,) || $target_delay > $conf::max_delayed) {
- msg( "mail,log", "$word[2]: target must be #-day with # between 0 and $conf::max_delayed (in particular, no '/' allowed)\n");
+ elsif ($word[2] =~ m,/,) {
+ msg( "mail,log", "$word[2]: filename may not contain slashes\n" );
+ }
+ elsif (!-f $word[1]) {
+ msg( "mail,log", "$word[1]: no such file\n" );
+ }
+ elsif (-e $word[2]) {
+ msg( "mail,log", "$word[2]: file exists\n" );
}
elsif ($word[1] =~ /$conf::keep_files/) {
msg( "mail,log", "$word[1] is protected, cannot rename\n" );
}
else {
- my($adelay);
- for ( $adelay=0; $adelay <= $conf::max_delayed && ! -f (sprintf( "$conf::targetdir_delayed",$adelay )."/$word[1]"); $adelay++ ) {
- }
- if ( $adelay > $conf::max_delayed) {
- msg( "mail,log", "$word[1] not found\n" );
- }
- elsif ($adelay == $target_delay) {
- msg( "mail,log", "$word[1] already is in $word[2]\n" );
+ if (!rename( $word[1], $word[2] )) {
+ msg( "mail,log", "rename: $!\n" );
}
else {
- my(@thesefiles);
- my($dir) = sprintf( "$conf::targetdir_delayed",$adelay );
- my($target_dir) = sprintf( "$conf::targetdir_delayed",$target_delay );
- push (@thesefiles, $word[1]);
- push (@thesefiles, get_filelist_from_known_good_changes("$dir/$word[1]"));
- for my $afile(@thesefiles) {
- if (! rename "$dir/$afile","$target_dir/$afile") {
- msg( "mail,log", "rename: $!\n" );
- }
- else {
- msg( "mail,log", "$afile moved to $target_delay-day\n" );
- }
- }
+ msg( "mail,log", "OK\n" );
}
}
}
}
}
rm( $commands );
- msg( "log", "-- End of $main::current_incoming_short/$commands processing\n" );
-}
-
-sub age_delayed_queues() {
- for ( my($adelay)=0 ; $adelay <= $conf::max_delayed ; $adelay++ ) {
- my($dir) = sprintf( "$conf::targetdir_delayed",$adelay );
- my($target_dir);
- if ($adelay == 0) {
- $target_dir = $conf::targetdir;
- }
- else {
- $target_dir = sprintf( "$conf::targetdir_delayed",$adelay-1 );
- }
- for my $achanges (<$dir/*.changes>) {
- my $mtime = (stat($achanges))[9];
- if ($mtime + 24*60*60 <= time) {
- utime undef,undef,($achanges);
- my @thesefiles = ($achanges =~ m,.*/([^/]*),);
- push (@thesefiles, get_filelist_from_known_good_changes($achanges));
- for my $afile(@thesefiles) {
- if (! rename "$dir/$afile","$target_dir/$afile") {
- msg( "log", "rename: $!\n" );
- }
- else {
- msg( "log", "$afile moved to $target_dir\n" );
- }
- }
- }
- }
- }
+ msg( "log", "-- End of $commands processing\n" );
}
#
# check if a file is already on target
#
-sub is_on_target($\@) {
+sub is_on_target($) {
my $file = shift;
- my $filelist = shift;
my $msg;
my $stat;
-
+
if ($conf::upload_method eq "ssh") {
($msg, $stat) = ssh_cmd( "ls -l $file" );
}
}
}
else {
- my @allfiles = ($file);
- push ( @allfiles, @$filelist);
- $stat = 1;
- $msg = "no such file";
- for my $afile(@allfiles) {
- if (-f "$conf::incoming/$afile") {
- $stat = 0;
- $msg = "$afile";
- }
- }
- for ( my($adelay)=0 ; $adelay <= $conf::max_delayed && $stat ; $adelay++ ) {
- for my $afile(@allfiles) {
- if (-f (sprintf( "$conf::targetdir_delayed",$adelay )."/$afile")) {
- $stat = 0;
- $msg = sprintf( "%d-day",$adelay )."/$afile";
- }
- }
- }
+ ($msg, $stat) = local_cmd( "$conf::ls -l $file" );
}
chomp( $msg );
debug( "exit status: $stat, output was: $msg" );
}
elsif ($conf::upload_method eq "ftp") {
my($rv, $file);
- if (!$main::FTP_chan->cwd( $main::current_targetdir )) {
- msg( "log,mail", "Can't cd to $main::current_targetdir on $conf::target\n" );
- goto err;
- }
foreach $file (@files) {
($rv, $msgs) = ftp_cmd( "put", $file );
goto err if !$rv;
}
}
else {
- ($msgs, $stat) = local_cmd( "$conf::cp @files $main::current_targetdir", 'NOCD' );
+ ($msgs, $stat) = local_cmd( "$conf::cp @files $conf::targetdir", 'NOCD' );
goto err if $stat;
}
}
}
else {
- my @tfiles = map { "$main::current_targetdir/$_" } @files;
+ my @tfiles = map { "$conf::targetdir/$_" } @files;
debug( "executing unlink(@tfiles)" );
rm( @tfiles );
}
my $found = 0;
my $stat;
local( *PIPE );
-
+
$stat = 1;
if (-x $conf::gpg) {
debug( "executing $conf::gpg --no-options --batch ".
if ($main::FTP_chan) {
# is already open, but might have timed out; test with a cwd
- return $main::FTP_chan if $main::FTP_chan->cwd( $main::current_targetdir );
+ return $main::FTP_chan if $main::FTP_chan->cwd( $conf::targetdir );
# cwd didn't work, channel is closed, try to reopen it
$main::FTP_chan = undef;
}
msg( "log,mail", "Can't set binary FTP mode on $conf::target\n" );
goto err;
}
- if (!$main::FTP_chan->cwd( $main::current_targetdir )) {
- msg( "log,mail", "Can't cd to $main::current_targetdir on $conf::target\n" );
+ if (!$main::FTP_chan->cwd( $conf::targetdir )) {
+ msg( "log,mail", "Can't cd to $conf::targetdir on $conf::target\n" );
goto err;
}
debug( "opened FTP channel to $conf::target" );
my ($msg, $stat);
my $ecmd = "$conf::ssh $conf::ssh_options $conf::target ".
- "-l $conf::targetlogin \'cd $main::current_targetdir; $cmd\'";
+ "-l $conf::targetlogin \'cd $conf::targetdir; $cmd\'";
debug( "executing $ecmd" );
$SIG{"ALRM"} = sub { die "timeout in ssh command\n" } ;
alarm( $conf::remote_timeout );
my ($msg, $stat);
my $ecmd = "$conf::scp $conf::ssh_options @_ ".
- "$conf::targetlogin\@$conf::target:$main::current_targetdir";
+ "$conf::targetlogin\@$conf::target:$conf::targetdir";
debug( "executing $ecmd" );
$SIG{"ALRM"} = sub { die "timeout in scp\n" } ;
alarm( $conf::remote_timeout );
my $nocd = shift;
my ($msg, $stat);
- my $ecmd = ($nocd ? "" : "cd $main::current_targetdir; ") . $cmd;
+ my $ecmd = ($nocd ? "" : "cd $conf::targetdir; ") . $cmd;
debug( "executing $ecmd" );
$msg = `($ecmd) 2>&1`;
$stat = $?;
projects / dak / commitdiff