OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable);
OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable);
OFFSET(PV_CPU_iret, pv_cpu_ops, iret);
- OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit);
+ OFFSET(PV_CPU_irq_enable_syscall_ret, pv_cpu_ops, irq_enable_syscall_ret);
OFFSET(PV_CPU_read_cr0, pv_cpu_ops, read_cr0);
#endif
* for paravirtualization. The following will never clobber any registers:
* INTERRUPT_RETURN (aka. "iret")
* GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
- * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
+ * ENABLE_INTERRUPTS_SYSCALL_RET (aka "sti; sysexit").
*
* For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
* specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
xorl %ebp,%ebp
TRACE_IRQS_ON
1: mov PT_FS(%esp), %fs
- ENABLE_INTERRUPTS_SYSEXIT
+ ENABLE_INTERRUPTS_SYSCALL_RET
CFI_ENDPROC
.pushsection .fixup,"ax"
2: movl $0,PT_FS(%esp)
.previous
END(native_iret)
-ENTRY(native_irq_enable_sysexit)
+ENTRY(native_irq_enable_syscall_ret)
sti
sysexit
-END(native_irq_enable_sysexit)
+END(native_irq_enable_syscall_ret)
#endif
KPROBE_ENTRY(int3)
DEF_NATIVE(pv_irq_ops, restore_fl, "push %eax; popf");
DEF_NATIVE(pv_irq_ops, save_fl, "pushf; pop %eax");
DEF_NATIVE(pv_cpu_ops, iret, "iret");
-DEF_NATIVE(pv_cpu_ops, irq_enable_sysexit, "sti; sysexit");
+DEF_NATIVE(pv_cpu_ops, irq_enable_syscall_ret, "sti; sysexit");
DEF_NATIVE(pv_mmu_ops, read_cr2, "mov %cr2, %eax");
DEF_NATIVE(pv_mmu_ops, write_cr3, "mov %eax, %cr3");
DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax");
SITE(pv_irq_ops, restore_fl);
SITE(pv_irq_ops, save_fl);
SITE(pv_cpu_ops, iret);
- SITE(pv_cpu_ops, irq_enable_sysexit);
+ SITE(pv_cpu_ops, irq_enable_syscall_ret);
SITE(pv_mmu_ops, read_cr2);
SITE(pv_mmu_ops, read_cr3);
SITE(pv_mmu_ops, write_cr3);
/* If the operation is a nop, then nop the callsite */
ret = paravirt_patch_nop();
else if (type == PARAVIRT_PATCH(pv_cpu_ops.iret) ||
- type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit))
+ type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_syscall_ret))
/* If operation requires a jmp, then jmp */
ret = paravirt_patch_jmp(insnbuf, opfunc, addr, len);
else
/* These are in entry.S */
extern void native_iret(void);
-extern void native_irq_enable_sysexit(void);
+extern void native_irq_enable_syscall_ret(void);
static int __init print_banner(void)
{
.write_idt_entry = write_dt_entry,
.load_esp0 = native_load_esp0,
- .irq_enable_sysexit = native_irq_enable_sysexit,
+ .irq_enable_syscall_ret = native_irq_enable_syscall_ret,
.iret = native_iret,
.set_iopl_mask = native_set_iopl_mask,
insns, eip);
case PARAVIRT_PATCH(pv_cpu_ops.iret):
return patch_internal(VMI_CALL_IRET, len, insns, eip);
- case PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit):
+ case PARAVIRT_PATCH(pv_cpu_ops.irq_enable_syscall_ret):
return patch_internal(VMI_CALL_SYSEXIT, len, insns, eip);
default:
break;
* the backend. They are performance critical anyway, so requiring
* a patch is not a big problem.
*/
- pv_cpu_ops.irq_enable_sysexit = (void *)0xfeedbab0;
+ pv_cpu_ops.irq_enable_syscall_ret = (void *)0xfeedbab0;
pv_cpu_ops.iret = (void *)0xbadbab0;
#ifdef CONFIG_SMP
.read_pmc = native_read_pmc,
.iret = (void *)&hypercall_page[__HYPERVISOR_iret],
- .irq_enable_sysexit = NULL, /* never called */
+ .irq_enable_syscall_ret = NULL, /* never called */
.load_tr_desc = paravirt_nop,
.set_ldt = xen_set_ldt,
-#ifdef CONFIG_X86_32
-# include "irqflags_32.h"
+#ifndef _X86_IRQFLAGS_H_
+#define _X86_IRQFLAGS_H_
+
+#include <asm/processor-flags.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * Interrupt control:
+ */
+
+static inline unsigned long native_save_fl(void)
+{
+ unsigned long flags;
+
+ __asm__ __volatile__(
+ "# __raw_save_flags\n\t"
+ "pushf ; pop %0"
+ : "=g" (flags)
+ : /* no input */
+ : "memory"
+ );
+
+ return flags;
+}
+
+static inline void native_restore_fl(unsigned long flags)
+{
+ __asm__ __volatile__(
+ "push %0 ; popf"
+ : /* no output */
+ :"g" (flags)
+ :"memory", "cc"
+ );
+}
+
+static inline void native_irq_disable(void)
+{
+ asm volatile("cli": : :"memory");
+}
+
+static inline void native_irq_enable(void)
+{
+ asm volatile("sti": : :"memory");
+}
+
+static inline void native_safe_halt(void)
+{
+ asm volatile("sti; hlt": : :"memory");
+}
+
+static inline void native_halt(void)
+{
+ asm volatile("hlt": : :"memory");
+}
+
+#endif
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#ifndef __ASSEMBLY__
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+ return native_save_fl();
+}
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+ native_restore_fl(flags);
+}
+
+static inline void raw_local_irq_disable(void)
+{
+ native_irq_disable();
+}
+
+static inline void raw_local_irq_enable(void)
+{
+ native_irq_enable();
+}
+
+/*
+ * Used in the idle loop; sti takes one instruction cycle
+ * to complete:
+ */
+static inline void raw_safe_halt(void)
+{
+ native_safe_halt();
+}
+
+/*
+ * Used when interrupts are already enabled or to
+ * shutdown the processor:
+ */
+static inline void halt(void)
+{
+ native_halt();
+}
+
+/*
+ * For spinlocks, etc:
+ */
+static inline unsigned long __raw_local_irq_save(void)
+{
+ unsigned long flags = __raw_local_save_flags();
+
+ raw_local_irq_disable();
+
+ return flags;
+}
+#else
+
+#define ENABLE_INTERRUPTS(x) sti
+#define DISABLE_INTERRUPTS(x) cli
+
+#ifdef CONFIG_X86_64
+#define INTERRUPT_RETURN iretq
+#define ENABLE_INTERRUPTS_SYSCALL_RET \
+ movq %gs:pda_oldrsp, %rsp; \
+ swapgs; \
+ sysretq;
+#else
+#define INTERRUPT_RETURN iret
+#define ENABLE_INTERRUPTS_SYSCALL_RET sti; sysexit
+#define GET_CR0_INTO_EAX movl %cr0, %eax
+#endif
+
+
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_PARAVIRT */
+
+#ifndef __ASSEMBLY__
+#define raw_local_save_flags(flags) \
+ do { (flags) = __raw_local_save_flags(); } while (0)
+
+#define raw_local_irq_save(flags) \
+ do { (flags) = __raw_local_irq_save(); } while (0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+ return !(flags & X86_EFLAGS_IF);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+ unsigned long flags = __raw_local_save_flags();
+
+ return raw_irqs_disabled_flags(flags);
+}
+
+/*
+ * makes the traced hardirq state match with the machine state
+ *
+ * should be a rarely used function, only in places where its
+ * otherwise impossible to know the irq state, like in traps.
+ */
+static inline void trace_hardirqs_fixup_flags(unsigned long flags)
+{
+ if (raw_irqs_disabled_flags(flags))
+ trace_hardirqs_off();
+ else
+ trace_hardirqs_on();
+}
+
+static inline void trace_hardirqs_fixup(void)
+{
+ unsigned long flags = __raw_local_save_flags();
+
+ trace_hardirqs_fixup_flags(flags);
+}
+
#else
-# include "irqflags_64.h"
+
+#ifdef CONFIG_X86_64
+/*
+ * Currently paravirt can't handle swapgs nicely when we
+ * don't have a stack we can rely on (such as a user space
+ * stack). So we either find a way around these or just fault
+ * and emulate if a guest tries to call swapgs directly.
+ *
+ * Either way, this is a good way to document that we don't
+ * have a reliable stack. x86_64 only.
+ */
+#define SWAPGS_UNSAFE_STACK swapgs
+#define ARCH_TRACE_IRQS_ON call trace_hardirqs_on_thunk
+#define ARCH_TRACE_IRQS_OFF call trace_hardirqs_off_thunk
+#define ARCH_LOCKDEP_SYS_EXIT call lockdep_sys_exit_thunk
+#define ARCH_LOCKDEP_SYS_EXIT_IRQ \
+ TRACE_IRQS_ON; \
+ sti; \
+ SAVE_REST; \
+ LOCKDEP_SYS_EXIT; \
+ RESTORE_REST; \
+ cli; \
+ TRACE_IRQS_OFF;
+
+#else
+#define ARCH_TRACE_IRQS_ON \
+ pushl %eax; \
+ pushl %ecx; \
+ pushl %edx; \
+ call trace_hardirqs_on; \
+ popl %edx; \
+ popl %ecx; \
+ popl %eax;
+
+#define ARCH_TRACE_IRQS_OFF \
+ pushl %eax; \
+ pushl %ecx; \
+ pushl %edx; \
+ call trace_hardirqs_off; \
+ popl %edx; \
+ popl %ecx; \
+ popl %eax;
+
+#define ARCH_LOCKDEP_SYS_EXIT \
+ pushl %eax; \
+ pushl %ecx; \
+ pushl %edx; \
+ call lockdep_sys_exit; \
+ popl %edx; \
+ popl %ecx; \
+ popl %eax;
+
+#define ARCH_LOCKDEP_SYS_EXIT_IRQ
+#endif
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+# define TRACE_IRQS_ON ARCH_TRACE_IRQS_ON
+# define TRACE_IRQS_OFF ARCH_TRACE_IRQS_OFF
+#else
+# define TRACE_IRQS_ON
+# define TRACE_IRQS_OFF
+#endif
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define LOCKDEP_SYS_EXIT ARCH_LOCKDEP_SYS_EXIT
+# define LOCKDEP_SYS_EXIT_IRQ ARCH_LOCKDEP_SYS_EXIT_IRQ
+# else
+# define LOCKDEP_SYS_EXIT
+# define LOCKDEP_SYS_EXIT_IRQ
+# endif
+
+#endif /* __ASSEMBLY__ */
#endif
+++ /dev/null
-/*
- * IRQ flags handling
- *
- * This file gets included from lowlevel asm headers too, to provide
- * wrapped versions of the local_irq_*() APIs, based on the
- * raw_local_irq_*() functions from the lowlevel headers.
- */
-#ifndef _ASM_IRQFLAGS_H
-#define _ASM_IRQFLAGS_H
-#include <asm/processor-flags.h>
-
-#ifndef __ASSEMBLY__
-static inline unsigned long native_save_fl(void)
-{
- unsigned long f;
- asm volatile("pushfl ; popl %0":"=g" (f): /* no input */);
- return f;
-}
-
-static inline void native_restore_fl(unsigned long f)
-{
- asm volatile("pushl %0 ; popfl": /* no output */
- :"g" (f)
- :"memory", "cc");
-}
-
-static inline void native_irq_disable(void)
-{
- asm volatile("cli": : :"memory");
-}
-
-static inline void native_irq_enable(void)
-{
- asm volatile("sti": : :"memory");
-}
-
-static inline void native_safe_halt(void)
-{
- asm volatile("sti; hlt": : :"memory");
-}
-
-static inline void native_halt(void)
-{
- asm volatile("hlt": : :"memory");
-}
-#endif /* __ASSEMBLY__ */
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#ifndef __ASSEMBLY__
-
-static inline unsigned long __raw_local_save_flags(void)
-{
- return native_save_fl();
-}
-
-static inline void raw_local_irq_restore(unsigned long flags)
-{
- native_restore_fl(flags);
-}
-
-static inline void raw_local_irq_disable(void)
-{
- native_irq_disable();
-}
-
-static inline void raw_local_irq_enable(void)
-{
- native_irq_enable();
-}
-
-/*
- * Used in the idle loop; sti takes one instruction cycle
- * to complete:
- */
-static inline void raw_safe_halt(void)
-{
- native_safe_halt();
-}
-
-/*
- * Used when interrupts are already enabled or to
- * shutdown the processor:
- */
-static inline void halt(void)
-{
- native_halt();
-}
-
-/*
- * For spinlocks, etc:
- */
-static inline unsigned long __raw_local_irq_save(void)
-{
- unsigned long flags = __raw_local_save_flags();
-
- raw_local_irq_disable();
-
- return flags;
-}
-
-#else
-#define DISABLE_INTERRUPTS(clobbers) cli
-#define ENABLE_INTERRUPTS(clobbers) sti
-#define ENABLE_INTERRUPTS_SYSEXIT sti; sysexit
-#define INTERRUPT_RETURN iret
-#define GET_CR0_INTO_EAX movl %cr0, %eax
-#endif /* __ASSEMBLY__ */
-#endif /* CONFIG_PARAVIRT */
-
-#ifndef __ASSEMBLY__
-#define raw_local_save_flags(flags) \
- do { (flags) = __raw_local_save_flags(); } while (0)
-
-#define raw_local_irq_save(flags) \
- do { (flags) = __raw_local_irq_save(); } while (0)
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
- return !(flags & X86_EFLAGS_IF);
-}
-
-static inline int raw_irqs_disabled(void)
-{
- unsigned long flags = __raw_local_save_flags();
-
- return raw_irqs_disabled_flags(flags);
-}
-
-/*
- * makes the traced hardirq state match with the machine state
- *
- * should be a rarely used function, only in places where its
- * otherwise impossible to know the irq state, like in traps.
- */
-static inline void trace_hardirqs_fixup_flags(unsigned long flags)
-{
- if (raw_irqs_disabled_flags(flags))
- trace_hardirqs_off();
- else
- trace_hardirqs_on();
-}
-
-static inline void trace_hardirqs_fixup(void)
-{
- unsigned long flags = __raw_local_save_flags();
-
- trace_hardirqs_fixup_flags(flags);
-}
-#endif /* __ASSEMBLY__ */
-
-/*
- * Do the CPU's IRQ-state tracing from assembly code. We call a
- * C function, so save all the C-clobbered registers:
- */
-#ifdef CONFIG_TRACE_IRQFLAGS
-
-# define TRACE_IRQS_ON \
- pushl %eax; \
- pushl %ecx; \
- pushl %edx; \
- call trace_hardirqs_on; \
- popl %edx; \
- popl %ecx; \
- popl %eax;
-
-# define TRACE_IRQS_OFF \
- pushl %eax; \
- pushl %ecx; \
- pushl %edx; \
- call trace_hardirqs_off; \
- popl %edx; \
- popl %ecx; \
- popl %eax;
-
-#else
-# define TRACE_IRQS_ON
-# define TRACE_IRQS_OFF
-#endif
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define LOCKDEP_SYS_EXIT \
- pushl %eax; \
- pushl %ecx; \
- pushl %edx; \
- call lockdep_sys_exit; \
- popl %edx; \
- popl %ecx; \
- popl %eax;
-#else
-# define LOCKDEP_SYS_EXIT
-#endif
-
-#endif
+++ /dev/null
-/*
- * IRQ flags handling
- *
- * This file gets included from lowlevel asm headers too, to provide
- * wrapped versions of the local_irq_*() APIs, based on the
- * raw_local_irq_*() functions from the lowlevel headers.
- */
-#ifndef _ASM_IRQFLAGS_H
-#define _ASM_IRQFLAGS_H
-#include <asm/processor-flags.h>
-
-#ifndef __ASSEMBLY__
-/*
- * Interrupt control:
- */
-
-static inline unsigned long __raw_local_save_flags(void)
-{
- unsigned long flags;
-
- __asm__ __volatile__(
- "# __raw_save_flags\n\t"
- "pushfq ; popq %q0"
- : "=g" (flags)
- : /* no input */
- : "memory"
- );
-
- return flags;
-}
-
-#define raw_local_save_flags(flags) \
- do { (flags) = __raw_local_save_flags(); } while (0)
-
-static inline void raw_local_irq_restore(unsigned long flags)
-{
- __asm__ __volatile__(
- "pushq %0 ; popfq"
- : /* no output */
- :"g" (flags)
- :"memory", "cc"
- );
-}
-
-#ifdef CONFIG_X86_VSMP
-
-/*
- * Interrupt control for the VSMP architecture:
- */
-
-static inline void raw_local_irq_disable(void)
-{
- unsigned long flags = __raw_local_save_flags();
-
- raw_local_irq_restore((flags & ~X86_EFLAGS_IF) | X86_EFLAGS_AC);
-}
-
-static inline void raw_local_irq_enable(void)
-{
- unsigned long flags = __raw_local_save_flags();
-
- raw_local_irq_restore((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
-}
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
- return !(flags & X86_EFLAGS_IF) || (flags & X86_EFLAGS_AC);
-}
-
-#else /* CONFIG_X86_VSMP */
-
-static inline void raw_local_irq_disable(void)
-{
- __asm__ __volatile__("cli" : : : "memory");
-}
-
-static inline void raw_local_irq_enable(void)
-{
- __asm__ __volatile__("sti" : : : "memory");
-}
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
- return !(flags & X86_EFLAGS_IF);
-}
-
-#endif
-
-/*
- * For spinlocks, etc.:
- */
-
-static inline unsigned long __raw_local_irq_save(void)
-{
- unsigned long flags = __raw_local_save_flags();
-
- raw_local_irq_disable();
-
- return flags;
-}
-
-#define raw_local_irq_save(flags) \
- do { (flags) = __raw_local_irq_save(); } while (0)
-
-static inline int raw_irqs_disabled(void)
-{
- unsigned long flags = __raw_local_save_flags();
-
- return raw_irqs_disabled_flags(flags);
-}
-
-/*
- * makes the traced hardirq state match with the machine state
- *
- * should be a rarely used function, only in places where its
- * otherwise impossible to know the irq state, like in traps.
- */
-static inline void trace_hardirqs_fixup_flags(unsigned long flags)
-{
- if (raw_irqs_disabled_flags(flags))
- trace_hardirqs_off();
- else
- trace_hardirqs_on();
-}
-
-static inline void trace_hardirqs_fixup(void)
-{
- unsigned long flags = __raw_local_save_flags();
-
- trace_hardirqs_fixup_flags(flags);
-}
-/*
- * Used in the idle loop; sti takes one instruction cycle
- * to complete:
- */
-static inline void raw_safe_halt(void)
-{
- __asm__ __volatile__("sti; hlt" : : : "memory");
-}
-
-/*
- * Used when interrupts are already enabled or to
- * shutdown the processor:
- */
-static inline void halt(void)
-{
- __asm__ __volatile__("hlt": : :"memory");
-}
-
-#else /* __ASSEMBLY__: */
-# ifdef CONFIG_TRACE_IRQFLAGS
-# define TRACE_IRQS_ON call trace_hardirqs_on_thunk
-# define TRACE_IRQS_OFF call trace_hardirqs_off_thunk
-# else
-# define TRACE_IRQS_ON
-# define TRACE_IRQS_OFF
-# endif
-# ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define LOCKDEP_SYS_EXIT call lockdep_sys_exit_thunk
-# define LOCKDEP_SYS_EXIT_IRQ \
- TRACE_IRQS_ON; \
- sti; \
- SAVE_REST; \
- LOCKDEP_SYS_EXIT; \
- RESTORE_REST; \
- cli; \
- TRACE_IRQS_OFF;
-# else
-# define LOCKDEP_SYS_EXIT
-# define LOCKDEP_SYS_EXIT_IRQ
-# endif
-#endif
-
-#endif
u64 (*read_pmc)(void);
/* These two are jmp to, not actually called. */
- void (*irq_enable_sysexit)(void);
+ void (*irq_enable_syscall_ret)(void);
void (*iret)(void);
struct pv_lazy_ops lazy_mode;
call *%cs:pv_irq_ops+PV_IRQ_irq_enable; \
popl %edx; popl %ecx; popl %eax)
-#define ENABLE_INTERRUPTS_SYSEXIT \
- PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_sysexit), CLBR_NONE,\
- jmp *%cs:pv_cpu_ops+PV_CPU_irq_enable_sysexit)
+#define ENABLE_INTERRUPTS_SYSCALL_RET \
+ PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_syscall_ret),\
+ CLBR_NONE, \
+ jmp *%cs:pv_cpu_ops+PV_CPU_irq_enable_syscall_ret)
#define GET_CR0_INTO_EAX \
push %ecx; push %edx; \
projects / linux-2.6 / commitdiff