]> err.no Git - linux-2.6/commitdiff
[PATCH] libata: fix READ CAPACITY simulation
authorTejun Heo <htejun@gmail.com>
Mon, 20 Nov 2006 02:15:47 +0000 (11:15 +0900)
committerTejun Heo <htejun@gmail.com>
Sun, 3 Dec 2006 08:56:23 +0000 (17:56 +0900)
* READ CAPACITY (16) implementation fixed.  Result was shifted by two
  bytes.  Carlos Pardo spotted this problem and submitted preliminary
  patch.  Capacity => 2TB is handled correctly now.  (verifid w/ fake
  capacity)

* Use dev->n_sectors instead of re-reading directly from ID data.

* Define and use ATA_SCSI_RBUF_SET() which considers rbuf length.
  This should be done for all simulation functions.  Userland can
  issue any simulated command with arbitrary buffer length.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Carlos Pardo <Carlos.Pardo@siliconimage.com>
drivers/ata/libata-scsi.c

index 56d7e1ea9d7226a403ab8c11ca5be8dd15869a99..7ff1adfc729c5a6157820f2db0228ec5f47bdd5d 100644 (file)
@@ -1697,6 +1697,22 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
        args->done(cmd);
 }
 
+/**
+ *     ATA_SCSI_RBUF_SET - helper to set values in SCSI response buffer
+ *     @idx: byte index into SCSI response buffer
+ *     @val: value to set
+ *
+ *     To be used by SCSI command simulator functions.  This macros
+ *     expects two local variables, u8 *rbuf and unsigned int buflen,
+ *     are in scope.
+ *
+ *     LOCKING:
+ *     None.
+ */
+#define ATA_SCSI_RBUF_SET(idx, val) do { \
+               if ((idx) < buflen) rbuf[(idx)] = (u8)(val); \
+       } while (0)
+
 /**
  *     ata_scsiop_inq_std - Simulate INQUIRY command
  *     @args: device IDENTIFY data / SCSI command of interest.
@@ -2156,67 +2172,42 @@ saving_not_supp:
  *     Simulate READ CAPACITY commands.
  *
  *     LOCKING:
- *     spin_lock_irqsave(host lock)
+ *     None.
  */
-
 unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf,
                                unsigned int buflen)
 {
-       u64 n_sectors;
-       u32 tmp;
+       u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */
 
        VPRINTK("ENTER\n");
 
-       if (ata_id_has_lba(args->id)) {
-               if (ata_id_has_lba48(args->id))
-                       n_sectors = ata_id_u64(args->id, 100);
-               else
-                       n_sectors = ata_id_u32(args->id, 60);
-       } else {
-               /* CHS default translation */
-               n_sectors = args->id[1] * args->id[3] * args->id[6];
-
-               if (ata_id_current_chs_valid(args->id))
-                       /* CHS current translation */
-                       n_sectors = ata_id_u32(args->id, 57);
-       }
-
-       n_sectors--;            /* ATA TotalUserSectors - 1 */
-
        if (args->cmd->cmnd[0] == READ_CAPACITY) {
-               if( n_sectors >= 0xffffffffULL )
-                       tmp = 0xffffffff ;  /* Return max count on overflow */
-               else
-                       tmp = n_sectors ;
+               if (last_lba >= 0xffffffffULL)
+                       last_lba = 0xffffffff;
 
                /* sector count, 32-bit */
-               rbuf[0] = tmp >> (8 * 3);
-               rbuf[1] = tmp >> (8 * 2);
-               rbuf[2] = tmp >> (8 * 1);
-               rbuf[3] = tmp;
+               ATA_SCSI_RBUF_SET(0, last_lba >> (8 * 3));
+               ATA_SCSI_RBUF_SET(1, last_lba >> (8 * 2));
+               ATA_SCSI_RBUF_SET(2, last_lba >> (8 * 1));
+               ATA_SCSI_RBUF_SET(3, last_lba);
 
                /* sector size */
-               tmp = ATA_SECT_SIZE;
-               rbuf[6] = tmp >> 8;
-               rbuf[7] = tmp;
-
+               ATA_SCSI_RBUF_SET(6, ATA_SECT_SIZE >> 8);
+               ATA_SCSI_RBUF_SET(7, ATA_SECT_SIZE);
        } else {
                /* sector count, 64-bit */
-               tmp = n_sectors >> (8 * 4);
-               rbuf[2] = tmp >> (8 * 3);
-               rbuf[3] = tmp >> (8 * 2);
-               rbuf[4] = tmp >> (8 * 1);
-               rbuf[5] = tmp;
-               tmp = n_sectors;
-               rbuf[6] = tmp >> (8 * 3);
-               rbuf[7] = tmp >> (8 * 2);
-               rbuf[8] = tmp >> (8 * 1);
-               rbuf[9] = tmp;
+               ATA_SCSI_RBUF_SET(0, last_lba >> (8 * 7));
+               ATA_SCSI_RBUF_SET(1, last_lba >> (8 * 6));
+               ATA_SCSI_RBUF_SET(2, last_lba >> (8 * 5));
+               ATA_SCSI_RBUF_SET(3, last_lba >> (8 * 4));
+               ATA_SCSI_RBUF_SET(4, last_lba >> (8 * 3));
+               ATA_SCSI_RBUF_SET(5, last_lba >> (8 * 2));
+               ATA_SCSI_RBUF_SET(6, last_lba >> (8 * 1));
+               ATA_SCSI_RBUF_SET(7, last_lba);
 
                /* sector size */
-               tmp = ATA_SECT_SIZE;
-               rbuf[12] = tmp >> 8;
-               rbuf[13] = tmp;
+               ATA_SCSI_RBUF_SET(10, ATA_SECT_SIZE >> 8);
+               ATA_SCSI_RBUF_SET(11, ATA_SECT_SIZE);
        }
 
        return 0;