]> err.no Git - linux-2.6/commitdiff
Macros to access the register of processors using the new MIPS
authorRalf Baechle <ralf@linux-mips.org>
Thu, 14 Jul 2005 07:30:27 +0000 (07:30 +0000)
committerRalf Baechle <ralf@linux-mips.org>
Sat, 29 Oct 2005 18:31:51 +0000 (19:31 +0100)
Multithreading ASE, also know as MT ASE.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/include/asm-mips/mipsmtregs.h b/include/asm-mips/mipsmtregs.h
new file mode 100644

include/asm-mips/mipsmtregs.h [new file with mode: 0644]
include/asm-mips/mipsregs.h

diff --git a/include/asm-mips/mipsmtregs.h b/include/asm-mips/mipsmtregs.h
new file mode 100644 (file)
index 0000000..9aaefc1
--- /dev/null
@@ -0,0 +1,367 @@
+/*
+ * MT regs definitions, follows on from mipsregs.h
+ * Copyright (C) 2004 - 2005 MIPS Technologies, Inc.  All rights reserved.
+ * Elizabeth Clarke et. al.
+ *
+ */
+#ifndef _ASM_MIPSMTREGS_H
+#define _ASM_MIPSMTREGS_H
+
+#include <asm/war.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * C macros
+ */
+
+#define read_c0_mvpcontrol()           __read_32bit_c0_register($0, 1)
+#define write_c0_mvpcontrol(val)       __write_32bit_c0_register($0, 1, val)
+
+#define read_c0_mvpconf0()             __read_32bit_c0_register($0, 2)
+#define read_c0_mvpconf1()             __read_32bit_c0_register($0, 3)
+
+#define read_c0_vpecontrol()           __read_32bit_c0_register($1, 1)
+#define write_c0_vpecontrol(val)       __write_32bit_c0_register($1, 1, val)
+
+#define read_c0_vpeconf0()             __read_32bit_c0_register($1, 2)
+#define write_c0_vpeconf0(val)         __write_32bit_c0_register($1, 2, val)
+
+#define read_c0_tcstatus()             __read_32bit_c0_register($2, 1)
+#define write_c0_tcstatus(val)         __write_32bit_c0_register($2, 1, val)
+
+#define read_c0_tcbind()               __read_32bit_c0_register($2, 2)
+
+#define read_c0_tccontext()            __read_32bit_c0_register($2, 5)
+#define write_c0_tccontext(val)                __write_32bit_c0_register($2, 5, val)
+
+#else /* Assembly */
+/*
+ * Macros for use in assembly language code
+ */
+
+#define CP0_MVPCONTROL         $0,1
+#define CP0_MVPCONF0           $0,2
+#define CP0_MVPCONF1           $0,3
+#define CP0_VPECONTROL         $1,1
+#define CP0_VPECONF0           $1,2
+#define CP0_VPECONF1           $1,3
+#define CP0_YQMASK             $1,4
+#define CP0_VPESCHEDULE        $1,5
+#define CP0_VPESCHEFBK         $1,6
+#define CP0_TCSTATUS           $2,1
+#define CP0_TCBIND             $2,2
+#define CP0_TCRESTART          $2,3
+#define CP0_TCHALT             $2,4
+#define CP0_TCCONTEXT          $2,5
+#define CP0_TCSCHEDULE         $2,6
+#define CP0_TCSCHEFBK          $2,7
+#define CP0_SRSCONF0           $6,1
+#define CP0_SRSCONF1           $6,2
+#define CP0_SRSCONF2           $6,3
+#define CP0_SRSCONF3           $6,4
+#define CP0_SRSCONF4           $6,5
+
+#endif
+
+/* MVPControl fields */
+#define MVPCONTROL_EVP         (_ULCAST_(1))
+
+#define MVPCONTROL_VPC_SHIFT   1
+#define MVPCONTROL_VPC         (_ULCAST_(1) << MVPCONTROL_VPC_SHIFT)
+
+#define MVPCONTROL_STLB_SHIFT  2
+#define MVPCONTROL_STLB                (_ULCAST_(1) << MVPCONTROL_STLB_SHIFT)
+
+
+/* MVPConf0 fields */
+#define MVPCONF0_PTC_SHIFT     0
+#define MVPCONF0_PTC           ( _ULCAST_(0xff))
+#define MVPCONF0_PVPE_SHIFT    10
+#define MVPCONF0_PVPE          ( _ULCAST_(0xf) << MVPCONF0_PVPE_SHIFT)
+#define MVPCONF0_TCA_SHIFT     15
+#define MVPCONF0_TCA           ( _ULCAST_(1) << MVPCONF0_TCA_SHIFT)
+#define MVPCONF0_PTLBE_SHIFT   16
+#define MVPCONF0_PTLBE         (_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT)
+#define MVPCONF0_TLBS_SHIFT    29
+#define MVPCONF0_TLBS          (_ULCAST_(1) << MVPCONF0_TLBS_SHIFT)
+#define MVPCONF0_M_SHIFT       31
+#define MVPCONF0_M             (_ULCAST_(0x1) << MVPCONF0_M_SHIFT)
+
+
+/* config3 fields */
+#define CONFIG3_MT_SHIFT       2
+#define CONFIG3_MT             (_ULCAST_(1) << CONFIG3_MT_SHIFT)
+
+
+/* VPEControl fields (per VPE) */
+#define VPECONTROL_TARGTC      (_ULCAST_(0xff))
+
+#define VPECONTROL_TE_SHIFT    15
+#define VPECONTROL_TE          (_ULCAST_(1) << VPECONTROL_TE_SHIFT)
+#define VPECONTROL_EXCPT_SHIFT 16
+#define VPECONTROL_EXCPT       (_ULCAST_(0x7) << VPECONTROL_EXCPT_SHIFT)
+
+/* Thread Exception Codes for EXCPT field */
+#define THREX_TU               0
+#define THREX_TO               1
+#define THREX_IYQ              2
+#define THREX_GSX              3
+#define THREX_YSCH             4
+#define THREX_GSSCH            5
+
+#define VPECONTROL_GSI_SHIFT   20
+#define VPECONTROL_GSI         (_ULCAST_(1) << VPECONTROL_GSI_SHIFT)
+#define VPECONTROL_YSI_SHIFT   21
+#define VPECONTROL_YSI         (_ULCAST_(1) << VPECONTROL_YSI_SHIFT)
+
+/* VPEConf0 fields (per VPE) */
+#define VPECONF0_VPA_SHIFT     0
+#define VPECONF0_VPA           (_ULCAST_(1) << VPECONF0_VPA_SHIFT)
+#define VPECONF0_MVP_SHIFT     1
+#define VPECONF0_MVP           (_ULCAST_(1) << VPECONF0_MVP_SHIFT)
+#define VPECONF0_XTC_SHIFT     21
+#define VPECONF0_XTC           (_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)
+
+/* TCStatus fields (per TC) */
+#define TCSTATUS_TASID         (_ULCAST_(0xff))
+#define TCSTATUS_IXMT_SHIFT    10
+#define TCSTATUS_IXMT          (_ULCAST_(1) << TCSTATUS_IXMT_SHIFT)
+#define TCSTATUS_TKSU_SHIFT    11
+#define TCSTATUS_TKSU          (_ULCAST_(3) << TCSTATUS_TKSU_SHIFT)
+#define TCSTATUS_A_SHIFT       13
+#define TCSTATUS_A             (_ULCAST_(1) << TCSTATUS_A_SHIFT)
+#define TCSTATUS_DA_SHIFT      15
+#define TCSTATUS_DA            (_ULCAST_(1) << TCSTATUS_DA_SHIFT)
+#define TCSTATUS_DT_SHIFT      20
+#define TCSTATUS_DT            (_ULCAST_(1) << TCSTATUS_DT_SHIFT)
+#define TCSTATUS_TDS_SHIFT     21
+#define TCSTATUS_TDS           (_ULCAST_(1) << TCSTATUS_TDS_SHIFT)
+#define TCSTATUS_TSST_SHIFT    22
+#define TCSTATUS_TSST          (_ULCAST_(1) << TCSTATUS_TSST_SHIFT)
+#define TCSTATUS_RNST_SHIFT    23
+#define TCSTATUS_RNST          (_ULCAST_(3) << TCSTATUS_RNST_SHIFT)
+/* Codes for RNST */
+#define TC_RUNNING             0
+#define TC_WAITING             1
+#define TC_YIELDING            2
+#define TC_GATED               3
+
+#define TCSTATUS_TMX_SHIFT     27
+#define TCSTATUS_TMX           (_ULCAST_(1) << TCSTATUS_TMX_SHIFT)
+/* TCStatus TCU bits can use same definitions/offsets as CU bits in Status */
+
+/* TCBind */
+#define TCBIND_CURVPE_SHIFT    0
+#define TCBIND_CURVPE          (_ULCAST_(0xf))
+
+#define TCBIND_CURTC_SHIFT     21
+
+#define TCBIND_CURTC           (_ULCAST_(0xff) << TCBIND_CURTC_SHIFT)
+
+/* TCHalt */
+#define TCHALT_H               (_ULCAST_(1))
+
+#ifndef __ASSEMBLY__
+
+extern void mips_mt_regdump(void);
+
+static inline unsigned int dvpe(void)
+{
+       int res = 0;
+
+       __asm__ __volatile__(
+       "       .set    push                                            \n"
+       "       .set    noreorder                                       \n"
+       "       .set    noat                                            \n"
+       "       .set    mips32r2                                        \n"
+       "       move    $1, %0                                          \n"
+       "       .word   0x41610001              # dvpe $1               \n"
+       "       ehb                                                     \n"
+       "       .set    pop                                             \n"
+       : "=r" (res));
+
+       instruction_hazard();
+
+       return res;
+}
+
+static inline void __raw_evpe(void)
+{
+       __asm__ __volatile__(
+       "       .set    push                                            \n"
+       "       .set    noreorder                                       \n"
+       "       .set    noat                                            \n"
+       "       .set    mips32r2                                        \n"
+       "       .word   0x41600021              # evpe                  \n"
+       "       ehb                                                     \n"
+       "       .set    pop                                             \n");
+}
+
+/* Enable multiMT if previous suggested it should be.
+   EMT_ENABLE to force */
+
+#define EVPE_ENABLE MVPCONTROL_EVP
+
+static inline void evpe(int previous)
+{
+       if ((previous & MVPCONTROL_EVP))
+               __raw_evpe();
+}
+
+static inline unsigned int dmt(void)
+{
+       int res;
+
+       __asm__ __volatile__(
+       "       .set    noreorder                                       \n"
+       "       .set    mips32r2                                        \n"
+       "       dmt     %0                                              \n"
+       "       ehb                                                     \n"
+       "       .set mips0                                              \n"
+       "       .set reorder                                            \n"
+       : "=r" (res));
+
+       instruction_hazard();
+
+       return res;
+}
+
+static inline void __raw_emt(void)
+{
+       __asm__ __volatile__(
+       "       .set    noreorder                                       \n"
+       "       .set    mips32r2                                        \n"
+       "       emt                                                     \n"
+       "       ehb                                                     \n"
+       "       .set    mips0                                           \n"
+       "       .set    reorder");
+}
+
+/* enable multiVPE if previous suggested it should be.
+   EVPE_ENABLE to force */
+
+#define EMT_ENABLE VPECONTROL_TE
+
+static inline void emt(int previous)
+{
+       if ((previous & EMT_ENABLE))
+               __raw_emt();
+}
+
+static inline void ehb(void)
+{
+       __asm__ __volatile__("ehb");
+}
+
+#define mftc0(rt,sel)                                                  \
+({                                                                     \
+        unsigned long  __res;                                          \
+                                                                       \
+       __asm__ __volatile__(                                           \
+        "      .set noat\n\t"                                          \
+        "      mftc0\t%0," #rt ", " #sel "\n\t"                        \
+        "      .set at\n\t"                                            \
+        : "=r" (__res));                                               \
+                                                                       \
+       __res;                                                          \
+})
+
+#define mftgpr(rt)                                                     \
+({                                                                     \
+       unsigned long __res;                                            \
+                                                                       \
+       __asm__ __volatile__(                                           \
+       "       .set    noat                                    \n"     \
+       "       mftgpr  %0," #rt "                              \n"     \
+       "       .set    at                                      \n"     \
+       : "=r" (__res));                                                \
+                                                                       \
+       __res;                                                          \
+})
+
+#define mftr(rt,u,sel)                                                 \
+({                                                                     \
+       unsigned long __res;                                            \
+                                                                       \
+       __asm__ __volatile__(                                           \
+       ".set noat\n\t"                                                 \
+       "mftr\t%0, " #rt ", " #u ", " #sel "\n\t"                       \
+       ".set at\n\t"                                                   \
+       : "=r" (__res));                                                \
+                                                                       \
+       __res;                                                          \
+})
+
+#define mttgpr(rd,v)                                                   \
+({                                                                     \
+       __asm__ __volatile__(                                           \
+       "mttgpr %0," #rd                                                \
+       : : "r" (v));                                                   \
+})
+
+#define mttc0(rd,sel,v)                                                        \
+({                                                                     \
+       __asm__ __volatile__(                                           \
+       "mttc0\t %0," #rd ", " #sel                                     \
+       : : "r" (v));                                                   \
+})
+
+
+#define mttr(rd,u,sel,v)                                               \
+({                                                                     \
+       __asm__ __volatile__(                                           \
+       "mttr   %0," #rd ", " #u ", " #sel                              \
+       : : "r" (v));                                                   \
+})
+
+
+#define settc(tc)                                                      \
+do {                                                                   \
+       write_c0_vpecontrol((read_c0_vpecontrol()&~VPECONTROL_TARGTC) | (tc)); \
+       ehb();                                                          \
+} while (0)
+
+
+/* you *must* set the target tc (settc) before trying to use these */
+#define read_vpe_c0_vpecontrol()       mftc0($1, 1)
+#define write_vpe_c0_vpecontrol(val)   mttc0($1, 1, val)
+#define read_vpe_c0_vpeconf0()         mftc0($1, 2)
+#define write_vpe_c0_vpeconf0(val)     mttc0($1, 2, val)
+#define read_vpe_c0_status()           mftc0($12, 0)
+#define write_vpe_c0_status(val)       mttc0($12, 0, val)
+#define read_vpe_c0_cause()            mftc0($13, 0)
+#define write_vpe_c0_cause(val)                mttc0($13, 0, val)
+#define read_vpe_c0_config()           mftc0($16, 0)
+#define write_vpe_c0_config(val)       mttc0($16, 0, val)
+#define read_vpe_c0_config1()          mftc0($16, 1)
+#define write_vpe_c0_config1(val)      mttc0($16, 1, val)
+#define read_vpe_c0_config7()          mftc0($16, 7)
+#define write_vpe_c0_config7(val)      mttc0($16, 7, val)
+#define read_vpe_c0_ebase()            mftc0($15,1)
+#define write_vpe_c0_ebase(val)                mttc0($15, 1, val)
+#define write_vpe_c0_compare(val)      mttc0($11, 0, val)
+
+
+/* TC */
+#define read_tc_c0_tcstatus()          mftc0($2, 1)
+#define write_tc_c0_tcstatus(val)      mttc0($2,1,val)
+#define read_tc_c0_tcbind()            mftc0($2, 2)
+#define write_tc_c0_tcbind(val)                mttc0($2,2,val)
+#define read_tc_c0_tcrestart()         mftc0($2, 3)
+#define write_tc_c0_tcrestart(val)     mttc0($2,3,val)
+#define read_tc_c0_tchalt()            mftc0($2, 4)
+#define write_tc_c0_tchalt(val)                mttc0($2,4,val)
+#define read_tc_c0_tccontext()         mftc0($2, 5)
+#define write_tc_c0_tccontext(val)     mttc0($2,5,val)
+
+/* GPR */
+#define read_tc_gpr_sp()               mftgpr($29)
+#define write_tc_gpr_sp(val)           mttgpr($29, val)
+#define read_tc_gpr_gp()               mftgpr($28)
+#define write_tc_gpr_gp(val)           mttgpr($28, val)
+
+
+#endif /* Not __ASSEMBLY__ */
+
+#endif
index 802b1c41ff6a2982ab3ec88d376b2f26e613bab7..89aac1e1f34846c78ccc0a436d6d57c8b6d922e6 100644 (file)
@@ -37,6 +37,8 @@
 #define _ULCAST_ (unsigned long)
 #endif
 
+#include <asm/mipsmtregs.h>
+
 /*
  * Coprocessor 0 register names
  */