struct hermes_tx_descriptor desc;
unsigned long flags;
- TRACE_ENTER(dev->name);
-
if (! netif_running(dev)) {
printk(KERN_ERR "%s: Tx on stopped device!\n",
dev->name);
- TRACE_EXIT(dev->name);
return 1;
}
if (netif_queue_stopped(dev)) {
printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
dev->name);
- TRACE_EXIT(dev->name);
return 1;
}
if (orinoco_lock(priv, &flags) != 0) {
printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n",
dev->name);
- TRACE_EXIT(dev->name);
return 1;
}
stats->tx_errors++;
orinoco_unlock(priv, &flags);
dev_kfree_skb(skb);
- TRACE_EXIT(dev->name);
return 0;
}
dev_kfree_skb(skb);
- TRACE_EXIT(dev->name);
-
return 0;
fail:
- TRACE_EXIT(dev->name);
orinoco_unlock(priv, &flags);
return err;
u16 reclen;
int len;
- TRACE_ENTER(dev->name);
-
/* No need to lock, the hw_unavailable flag is already set in
* alloc_orinocodev() */
priv->nicbuf_size = IEEE80211_FRAME_LEN + ETH_HLEN;
printk(KERN_DEBUG "%s: ready\n", dev->name);
out:
- TRACE_EXIT(dev->name);
return err;
}
int numrates;
int i, k;
- TRACE_ENTER(dev->name);
-
rrq->length = sizeof(struct iw_range);
memset(range, 0, sizeof(struct iw_range));
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP);
- TRACE_EXIT(dev->name);
-
return 0;
}
int err = 0;
unsigned long flags;
- TRACE_ENTER(dev->name);
-
if (netif_running(dev)) {
err = orinoco_hw_get_essid(priv, &active, essidbuf);
if (err)
erq->flags = 1;
erq->length = strlen(essidbuf) + 1;
- TRACE_EXIT(dev->name);
-
return 0;
}
.get_link = ethtool_op_get_link,
};
-/********************************************************************/
-/* Debugging */
-/********************************************************************/
-
-#if 0
-static void show_rx_frame(struct orinoco_rxframe_hdr *frame)
-{
- printk(KERN_DEBUG "RX descriptor:\n");
- printk(KERN_DEBUG " status = 0x%04x\n", frame->desc.status);
- printk(KERN_DEBUG " time = 0x%08x\n", frame->desc.time);
- printk(KERN_DEBUG " silence = 0x%02x\n", frame->desc.silence);
- printk(KERN_DEBUG " signal = 0x%02x\n", frame->desc.signal);
- printk(KERN_DEBUG " rate = 0x%02x\n", frame->desc.rate);
- printk(KERN_DEBUG " rxflow = 0x%02x\n", frame->desc.rxflow);
- printk(KERN_DEBUG " reserved = 0x%08x\n", frame->desc.reserved);
-
- printk(KERN_DEBUG "IEEE 802.11 header:\n");
- printk(KERN_DEBUG " frame_ctl = 0x%04x\n",
- frame->p80211.frame_ctl);
- printk(KERN_DEBUG " duration_id = 0x%04x\n",
- frame->p80211.duration_id);
- printk(KERN_DEBUG " addr1 = %02x:%02x:%02x:%02x:%02x:%02x\n",
- frame->p80211.addr1[0], frame->p80211.addr1[1],
- frame->p80211.addr1[2], frame->p80211.addr1[3],
- frame->p80211.addr1[4], frame->p80211.addr1[5]);
- printk(KERN_DEBUG " addr2 = %02x:%02x:%02x:%02x:%02x:%02x\n",
- frame->p80211.addr2[0], frame->p80211.addr2[1],
- frame->p80211.addr2[2], frame->p80211.addr2[3],
- frame->p80211.addr2[4], frame->p80211.addr2[5]);
- printk(KERN_DEBUG " addr3 = %02x:%02x:%02x:%02x:%02x:%02x\n",
- frame->p80211.addr3[0], frame->p80211.addr3[1],
- frame->p80211.addr3[2], frame->p80211.addr3[3],
- frame->p80211.addr3[4], frame->p80211.addr3[5]);
- printk(KERN_DEBUG " seq_ctl = 0x%04x\n",
- frame->p80211.seq_ctl);
- printk(KERN_DEBUG " addr4 = %02x:%02x:%02x:%02x:%02x:%02x\n",
- frame->p80211.addr4[0], frame->p80211.addr4[1],
- frame->p80211.addr4[2], frame->p80211.addr4[3],
- frame->p80211.addr4[4], frame->p80211.addr4[5]);
- printk(KERN_DEBUG " data_len = 0x%04x\n",
- frame->p80211.data_len);
-
- printk(KERN_DEBUG "IEEE 802.3 header:\n");
- printk(KERN_DEBUG " dest = %02x:%02x:%02x:%02x:%02x:%02x\n",
- frame->p8023.h_dest[0], frame->p8023.h_dest[1],
- frame->p8023.h_dest[2], frame->p8023.h_dest[3],
- frame->p8023.h_dest[4], frame->p8023.h_dest[5]);
- printk(KERN_DEBUG " src = %02x:%02x:%02x:%02x:%02x:%02x\n",
- frame->p8023.h_source[0], frame->p8023.h_source[1],
- frame->p8023.h_source[2], frame->p8023.h_source[3],
- frame->p8023.h_source[4], frame->p8023.h_source[5]);
- printk(KERN_DEBUG " len = 0x%04x\n", frame->p8023.h_proto);
-
- printk(KERN_DEBUG "IEEE 802.2 LLC/SNAP header:\n");
- printk(KERN_DEBUG " DSAP = 0x%02x\n", frame->p8022.dsap);
- printk(KERN_DEBUG " SSAP = 0x%02x\n", frame->p8022.ssap);
- printk(KERN_DEBUG " ctrl = 0x%02x\n", frame->p8022.ctrl);
- printk(KERN_DEBUG " OUI = %02x:%02x:%02x\n",
- frame->p8022.oui[0], frame->p8022.oui[1], frame->p8022.oui[2]);
- printk(KERN_DEBUG " ethertype = 0x%04x\n", frame->ethertype);
-}
-#endif /* 0 */
-
/********************************************************************/
/* Module initialization */
/********************************************************************/