[SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error

This patch adds function to print the pending frame details before returning
failure from the reset routine. It also exposes a new variable megasas_dbg_lvl
that allows the user to set the debug level for logging.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index c3b50b3757993758f8f93f1c43ad33e7e42405aa..0791d62b167fb15cffdcf920c9cd4449008a1518 100644 (file)
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -71,6 +71,8 @@ static struct megasas_mgmt_info megasas_mgmt_info;
 static struct fasync_struct *megasas_async_queue;
 static DEFINE_MUTEX(megasas_async_queue_mutex);
 
+static u32 megasas_dbg_lvl;
+
 /**
  * megasas_get_cmd -   Get a command from the free pool
  * @instance:          Adapter soft state
@@ -758,6 +760,69 @@ static inline int megasas_is_ldio(struct scsi_cmnd *cmd)
        }
 }
 
+ /**
+ * megasas_dump_pending_frames -       Dumps the frame address of all pending cmds
+ *                                     in FW
+ * @instance:                          Adapter soft state
+ */
+static inline void
+megasas_dump_pending_frames(struct megasas_instance *instance)
+{
+       struct megasas_cmd *cmd;
+       int i,n;
+       union megasas_sgl *mfi_sgl;
+       struct megasas_io_frame *ldio;
+       struct megasas_pthru_frame *pthru;
+       u32 sgcount;
+       u32 max_cmd = instance->max_fw_cmds;
+
+       printk(KERN_ERR "\nmegasas[%d]: Dumping Frame Phys Address of all pending cmds in FW\n",instance->host->host_no);
+       printk(KERN_ERR "megasas[%d]: Total OS Pending cmds : %d\n",instance->host->host_no,atomic_read(&instance->fw_outstanding));
+       if (IS_DMA64)
+               printk(KERN_ERR "\nmegasas[%d]: 64 bit SGLs were sent to FW\n",instance->host->host_no);
+       else
+               printk(KERN_ERR "\nmegasas[%d]: 32 bit SGLs were sent to FW\n",instance->host->host_no);
+
+       printk(KERN_ERR "megasas[%d]: Pending OS cmds in FW : \n",instance->host->host_no);
+       for (i = 0; i < max_cmd; i++) {
+               cmd = instance->cmd_list[i];
+               if(!cmd->scmd)
+                       continue;
+               printk(KERN_ERR "megasas[%d]: Frame addr :0x%08lx : ",instance->host->host_no,(unsigned long)cmd->frame_phys_addr);
+               if (megasas_is_ldio(cmd->scmd)){
+                       ldio = (struct megasas_io_frame *)cmd->frame;
+                       mfi_sgl = &ldio->sgl;
+                       sgcount = ldio->sge_count;
+                       printk(KERN_ERR "megasas[%d]: frame count : 0x%x, Cmd : 0x%x, Tgt id : 0x%x, lba lo : 0x%x, lba_hi : 0x%x, sense_buf addr : 0x%x,sge count : 0x%x\n",instance->host->host_no, cmd->frame_count,ldio->cmd,ldio->target_id, ldio->start_lba_lo,ldio->start_lba_hi,ldio->sense_buf_phys_addr_lo,sgcount);
+               }
+               else {
+                       pthru = (struct megasas_pthru_frame *) cmd->frame;
+                       mfi_sgl = &pthru->sgl;
+                       sgcount = pthru->sge_count;
+                       printk(KERN_ERR "megasas[%d]: frame count : 0x%x, Cmd : 0x%x, Tgt id : 0x%x, lun : 0x%x, cdb_len : 0x%x, data xfer len : 0x%x, sense_buf addr : 0x%x,sge count : 0x%x\n",instance->host->host_no,cmd->frame_count,pthru->cmd,pthru->target_id,pthru->lun,pthru->cdb_len , pthru->data_xfer_len,pthru->sense_buf_phys_addr_lo,sgcount);
+               }
+       if(megasas_dbg_lvl & MEGASAS_DBG_LVL){
+               for (n = 0; n < sgcount; n++){
+                       if (IS_DMA64)
+                               printk(KERN_ERR "megasas: sgl len : 0x%x, sgl addr : 0x%08lx ",mfi_sgl->sge64[n].length , (unsigned long)mfi_sgl->sge64[n].phys_addr) ;
+                       else
+                               printk(KERN_ERR "megasas: sgl len : 0x%x, sgl addr : 0x%x ",mfi_sgl->sge32[n].length , mfi_sgl->sge32[n].phys_addr) ;
+                       }
+               }
+               printk(KERN_ERR "\n");
+       } /*for max_cmd*/
+       printk(KERN_ERR "\nmegasas[%d]: Pending Internal cmds in FW : \n",instance->host->host_no);
+       for (i = 0; i < max_cmd; i++) {
+
+               cmd = instance->cmd_list[i];
+
+               if(cmd->sync_cmd == 1){
+                       printk(KERN_ERR "0x%08lx : ", (unsigned long)cmd->frame_phys_addr);
+               }
+       }
+       printk(KERN_ERR "megasas[%d]: Dumping Done.\n\n",instance->host->host_no);
+}
+
 /**
  * megasas_queue_command -     Queue entry point
  * @scmd:                      SCSI command to be queued
@@ -869,6 +934,7 @@ static int megasas_wait_for_outstanding(struct megasas_instance *instance)
                */
                writel(MFI_STOP_ADP,
                                &instance->reg_set->inbound_doorbell);
+               megasas_dump_pending_frames(instance);
                instance->hw_crit_error = 1;
                return FAILED;
        }
@@ -2236,6 +2302,8 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
        instance->unique_id = pdev->bus->number << 8 | pdev->devfn;
        instance->init_id = MEGASAS_DEFAULT_INIT_ID;
 
+       megasas_dbg_lvl = 0;
+
        /*
         * Initialize MFI Firmware
         */
@@ -2862,6 +2930,26 @@ megasas_sysfs_show_release_date(struct device_driver *dd, char *buf)
 static DRIVER_ATTR(release_date, S_IRUGO, megasas_sysfs_show_release_date,
                   NULL);
 
+static ssize_t
+megasas_sysfs_show_dbg_lvl(struct device_driver *dd, char *buf)
+{
+       return sprintf(buf,"%u",megasas_dbg_lvl);
+}
+
+static ssize_t
+megasas_sysfs_set_dbg_lvl(struct device_driver *dd, const char *buf, size_t count)
+{
+       int retval = count;
+       if(sscanf(buf,"%u",&megasas_dbg_lvl)<1){
+               printk(KERN_ERR "megasas: could not set dbg_lvl\n");
+               retval = -EINVAL;
+       }
+       return retval;
+}
+
+static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUGO, megasas_sysfs_show_dbg_lvl,
+                  megasas_sysfs_set_dbg_lvl);
+
 /**
  * megasas_init - Driver load entry point
  */
@@ -2902,6 +2990,8 @@ static int __init megasas_init(void)
        driver_create_file(&megasas_pci_driver.driver, &driver_attr_version);
        driver_create_file(&megasas_pci_driver.driver,
                           &driver_attr_release_date);
+       driver_create_file(&megasas_pci_driver.driver,
+                          &driver_attr_dbg_lvl);
 
        return rval;
 }
@@ -2914,6 +3004,8 @@ static void __exit megasas_exit(void)
        driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
        driver_remove_file(&megasas_pci_driver.driver,
                           &driver_attr_release_date);
+       driver_remove_file(&megasas_pci_driver.driver,
+                          &driver_attr_dbg_lvl);
 
        pci_unregister_driver(&megasas_pci_driver);
        unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");

diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 74feffe2fff3cd621d446808214a6dd22f70b478..ad7ef7444069ee3dff8a72ba8be15ee1a8b2e631 100644 (file)
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -537,6 +537,8 @@ struct megasas_ctrl_info {
 #define MEGASAS_MAX_LUN                                8
 #define MEGASAS_MAX_LD                         64
 
+#define MEGASAS_DBG_LVL                                1
+
 /*
  * When SCSI mid-layer calls driver's reset routine, driver waits for
  * MEGASAS_RESET_WAIT_TIME seconds for all outstanding IO to complete. Note