SAVE_ITEM(S3C2410_REFRESH),
};
-static struct sleep_save gpio_save[] = {
- SAVE_ITEM(S3C2410_GPACON),
- SAVE_ITEM(S3C2410_GPADAT),
-
- SAVE_ITEM(S3C2410_GPBCON),
- SAVE_ITEM(S3C2410_GPBDAT),
- SAVE_ITEM(S3C2410_GPBUP),
-
- SAVE_ITEM(S3C2410_GPCCON),
- SAVE_ITEM(S3C2410_GPCDAT),
- SAVE_ITEM(S3C2410_GPCUP),
-
- SAVE_ITEM(S3C2410_GPDCON),
- SAVE_ITEM(S3C2410_GPDDAT),
- SAVE_ITEM(S3C2410_GPDUP),
-
- SAVE_ITEM(S3C2410_GPECON),
- SAVE_ITEM(S3C2410_GPEDAT),
- SAVE_ITEM(S3C2410_GPEUP),
-
- SAVE_ITEM(S3C2410_GPFCON),
- SAVE_ITEM(S3C2410_GPFDAT),
- SAVE_ITEM(S3C2410_GPFUP),
-
- SAVE_ITEM(S3C2410_GPGCON),
- SAVE_ITEM(S3C2410_GPGDAT),
- SAVE_ITEM(S3C2410_GPGUP),
-
- SAVE_ITEM(S3C2410_GPHCON),
- SAVE_ITEM(S3C2410_GPHDAT),
- SAVE_ITEM(S3C2410_GPHUP),
+static struct gpio_sleep {
+ void __iomem *base;
+ unsigned int gpcon;
+ unsigned int gpdat;
+ unsigned int gpup;
+} gpio_save[] = {
+ [0] = {
+ .base = S3C2410_GPACON,
+ },
+ [1] = {
+ .base = S3C2410_GPBCON,
+ },
+ [2] = {
+ .base = S3C2410_GPCCON,
+ },
+ [3] = {
+ .base = S3C2410_GPDCON,
+ },
+ [4] = {
+ .base = S3C2410_GPECON,
+ },
+ [5] = {
+ .base = S3C2410_GPFCON,
+ },
+ [6] = {
+ .base = S3C2410_GPGCON,
+ },
+ [7] = {
+ .base = S3C2410_GPHCON,
+ },
+};
+static struct sleep_save misc_save[] = {
SAVE_ITEM(S3C2410_DCLKCON),
};
}
}
+/* offsets for CON/DAT/UP registers */
+
+#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON)
+#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON)
+#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON)
+
+/* s3c2410_pm_save_gpios()
+ *
+ * Save the state of the GPIOs
+ */
+
+static void s3c2410_pm_save_gpios(void)
+{
+ struct gpio_sleep *gps = gpio_save;
+ unsigned int gpio;
+
+ for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
+ void __iomem *base = gps->base;
+
+ gps->gpcon = __raw_readl(base + OFFS_CON);
+ gps->gpdat = __raw_readl(base + OFFS_DAT);
+
+ if (gpio > 0)
+ gps->gpup = __raw_readl(base + OFFS_UP);
+
+ }
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+ return (con == 2 || con == 3);
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+ return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+ return con == 1;
+}
+
+/* s3c2410_pm_restore_gpio()
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT } Change DAT first
+ * { IN => SFN } Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN } Change CON first, so new data will not glitch
+ * { SFN => IN } Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ * state for when it is next output.
+ */
+
+static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
+{
+ void __iomem *base = gps->base;
+ unsigned long gps_gpcon = gps->gpcon;
+ unsigned long gps_gpdat = gps->gpdat;
+ unsigned long old_gpcon;
+ unsigned long old_gpdat;
+ unsigned long old_gpup = 0x0;
+ unsigned long gpcon;
+ int nr;
+
+ old_gpcon = __raw_readl(base + OFFS_CON);
+ old_gpdat = __raw_readl(base + OFFS_DAT);
+
+ if (base == S3C2410_GPACON) {
+ /* GPACON only has one bit per control / data and no PULLUPs.
+ * GPACON[x] = 0 => Output, 1 => SFN */
+
+ /* first set all SFN bits to SFN */
+
+ gpcon = old_gpcon | gps->gpcon;
+ __raw_writel(gpcon, base + OFFS_CON);
+
+ /* now set all the other bits */
+
+ __raw_writel(gps_gpdat, base + OFFS_DAT);
+ __raw_writel(gps_gpcon, base + OFFS_CON);
+ } else {
+ unsigned long old, new, mask;
+ unsigned long change_mask = 0x0;
+
+ old_gpup = __raw_readl(base + OFFS_UP);
+
+ /* Create a change_mask of all the items that need to have
+ * their CON value changed before their DAT value, so that
+ * we minimise the work between the two settings.
+ */
+
+ for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+ old = (old_gpcon & mask) >> nr;
+ new = (gps_gpcon & mask) >> nr;
+
+ /* If there is no change, then skip */
+
+ if (old == new)
+ continue;
+
+ /* If both are special function, then skip */
+
+ if (is_sfn(old) && is_sfn(new))
+ continue;
+
+ /* Change is IN => OUT, do not change now */
+
+ if (is_in(old) && is_out(new))
+ continue;
+
+ /* Change is SFN => OUT, do not change now */
+
+ if (is_sfn(old) && is_out(new))
+ continue;
+
+ /* We should now be at the case of IN=>SFN,
+ * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+ change_mask |= mask;
+ }
+
+ /* Write the new CON settings */
+
+ gpcon = old_gpcon & ~change_mask;
+ gpcon |= gps_gpcon & change_mask;
+
+ __raw_writel(gpcon, base + OFFS_CON);
+
+ /* Now change any items that require DAT,CON */
+
+ __raw_writel(gps_gpdat, base + OFFS_DAT);
+ __raw_writel(gps_gpcon, base + OFFS_CON);
+ __raw_writel(gps->gpup, base + OFFS_UP);
+ }
+
+ DBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
+ index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+
+/** s3c2410_pm_restore_gpios()
+ *
+ * Restore the state of the GPIOs
+ */
+
+static void s3c2410_pm_restore_gpios(void)
+{
+ struct gpio_sleep *gps = gpio_save;
+ int gpio;
+
+ for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
+ s3c2410_pm_restore_gpio(gpio, gps);
+ }
+}
+
void (*pm_cpu_prep)(void);
void (*pm_cpu_sleep)(void);
/* save all necessary core registers not covered by the drivers */
- s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
+ s3c2410_pm_save_gpios();
+ s3c2410_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
/* restore the system state */
s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
+ s3c2410_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
+ s3c2410_pm_restore_gpios();
s3c2410_pm_debug_init();
projects / linux-2.6 / commitdiff