]> err.no Git - linux-2.6/commitdiff
EHCI: don't hide ports owned by the companion
authorAlan Stern <stern@rowland.harvard.edu>
Tue, 16 Jan 2007 16:58:47 +0000 (11:58 -0500)
committerGreg Kroah-Hartman <gregkh@suse.de>
Wed, 7 Feb 2007 23:44:37 +0000 (15:44 -0800)
This patch (as709) changes the way ehci-hcd presents port status
values for ports owned by the companion controller.  It no longer
hides the information; in particular, it allows the core to see the
disconnect event that occurs when a full- or low-speed device is
switched over to the companion.  This is required for the next patch
in this series.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/host/ehci-hub.c

index 12f881ff4b2302088760ec4739cdb7118b3c86c7..076474d95dbfd0e8155c71626b30be06ced555dc 100644 (file)
@@ -270,16 +270,14 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
        spin_lock_irqsave (&ehci->lock, flags);
        for (i = 0; i < ports; i++) {
                temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
-               if (temp & PORT_OWNER) {
-                       /* don't report this in GetPortStatus */
-                       if (temp & PORT_CSC) {
-                               temp &= ~PORT_RWC_BITS;
-                               temp |= PORT_CSC;
-                               ehci_writel(ehci, temp,
-                                           &ehci->regs->port_status [i]);
-                       }
-                       continue;
-               }
+
+               /*
+                * Return status information even for ports with OWNER set.
+                * Otherwise khubd wouldn't see the disconnect event when a
+                * high-speed device is switched over to the companion
+                * controller by the user.
+                */
+
                if (!(temp & PORT_CONNECT))
                        ehci->reset_done [i] = 0;
                if ((temp & mask) != 0
@@ -377,8 +375,13 @@ static int ehci_hub_control (
                        goto error;
                wIndex--;
                temp = ehci_readl(ehci, status_reg);
-               if (temp & PORT_OWNER)
-                       break;
+
+               /*
+                * Even if OWNER is set, so the port is owned by the
+                * companion controller, khubd needs to be able to clear
+                * the port-change status bits (especially
+                * USB_PORT_FEAT_C_CONNECTION).
+                */
 
                switch (wValue) {
                case USB_PORT_FEAT_ENABLE:
@@ -501,24 +504,27 @@ static int ehci_hub_control (
                                        ehci_readl(ehci, status_reg));
                }
 
-               // don't show wPortStatus if it's owned by a companion hc
-               if (!(temp & PORT_OWNER)) {
-                       if (temp & PORT_CONNECT) {
-                               status |= 1 << USB_PORT_FEAT_CONNECTION;
-                               // status may be from integrated TT
-                               status |= ehci_port_speed(ehci, temp);
-                       }
-                       if (temp & PORT_PE)
-                               status |= 1 << USB_PORT_FEAT_ENABLE;
-                       if (temp & (PORT_SUSPEND|PORT_RESUME))
-                               status |= 1 << USB_PORT_FEAT_SUSPEND;
-                       if (temp & PORT_OC)
-                               status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
-                       if (temp & PORT_RESET)
-                               status |= 1 << USB_PORT_FEAT_RESET;
-                       if (temp & PORT_POWER)
-                               status |= 1 << USB_PORT_FEAT_POWER;
+               /*
+                * Even if OWNER is set, there's no harm letting khubd
+                * see the wPortStatus values (they should all be 0 except
+                * for PORT_POWER anyway).
+                */
+
+               if (temp & PORT_CONNECT) {
+                       status |= 1 << USB_PORT_FEAT_CONNECTION;
+                       // status may be from integrated TT
+                       status |= ehci_port_speed(ehci, temp);
                }
+               if (temp & PORT_PE)
+                       status |= 1 << USB_PORT_FEAT_ENABLE;
+               if (temp & (PORT_SUSPEND|PORT_RESUME))
+                       status |= 1 << USB_PORT_FEAT_SUSPEND;
+               if (temp & PORT_OC)
+                       status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+               if (temp & PORT_RESET)
+                       status |= 1 << USB_PORT_FEAT_RESET;
+               if (temp & PORT_POWER)
+                       status |= 1 << USB_PORT_FEAT_POWER;
 
 #ifndef        EHCI_VERBOSE_DEBUG
        if (status & ~0xffff)   /* only if wPortChange is interesting */