]> err.no Git - linux-2.6/commitdiff
[ALSA] Add support for Cyrix/NatSemi Geode CS5530 (VSA1)
authorTakashi Iwai <tiwai@suse.de>
Thu, 24 May 2007 16:46:54 +0000 (18:46 +0200)
committerJaroslav Kysela <perex@suse.cz>
Fri, 20 Jul 2007 09:11:19 +0000 (11:11 +0200)
Add support for Cyrix/NatSemi Geode SC5530 (VSA1).
The driver is snd-cs5530.
Signed-off-by Ash Willis <ashwillis@programmer.net>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Documentation/sound/alsa/ALSA-Configuration.txt
include/sound/sb.h
sound/isa/sb/sb16_main.c
sound/isa/sb/sb_common.c
sound/isa/sb/sb_mixer.c
sound/pci/Kconfig
sound/pci/Makefile
sound/pci/cs5530.c [new file with mode: 0644]

index bef13521f6c41f502194c9e95c37029b27a3ecb9..47daca0ecd32ce527a9e4546523c33eb4312b41a 100644 (file)
@@ -467,7 +467,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     above explicitly.
 
     The power-management is supported.
-    
+
+  Module snd-cs5530
+  _________________
+
+    Module for Cyrix/NatSemi Geode 5530 chip. 
+  
   Module snd-cs5535audio
   ----------------------
 
index 2dd5c8e5b4feabc027a48dfed2320421c26d4c26..3ad854b397d27234378276982d764ab649d55c27 100644 (file)
@@ -38,6 +38,7 @@ enum sb_hw_type {
        SB_HW_ALS100,           /* Avance Logic ALS100 chip */
        SB_HW_ALS4000,          /* Avance Logic ALS4000 chip */
        SB_HW_DT019X,           /* Diamond Tech. DT-019X / Avance Logic ALS-007 */
+       SB_HW_CS5530,           /* Cyrix/NatSemi 5530 VSA1 */
 };
 
 #define SB_OPEN_PCM                    0x01
index 383911b9e74dcc709c1e32412953660b2c49796f..5d4d3aafe2d5aaae3c2ca204e8d4030c583826e7 100644 (file)
@@ -563,6 +563,11 @@ static int snd_sb16_playback_open(struct snd_pcm_substream *substream)
       __open_ok:
        if (chip->hardware == SB_HW_ALS100)
                runtime->hw.rate_max = 48000;
+       if (chip->hardware == SB_HW_CS5530) {
+               runtime->hw.buffer_bytes_max = 32 * 1024;
+               runtime->hw.periods_min = 2;
+               runtime->hw.rate_min = 44100;
+       }
        if (chip->mode & SB_RATE_LOCK)
                runtime->hw.rate_min = runtime->hw.rate_max = chip->locked_rate;
        chip->playback_substream = substream;
@@ -633,6 +638,11 @@ static int snd_sb16_capture_open(struct snd_pcm_substream *substream)
       __open_ok:
        if (chip->hardware == SB_HW_ALS100)
                runtime->hw.rate_max = 48000;
+       if (chip->hardware == SB_HW_CS5530) {
+               runtime->hw.buffer_bytes_max = 32 * 1024;
+               runtime->hw.periods_min = 2;
+               runtime->hw.rate_min = 44100;
+       }
        if (chip->mode & SB_RATE_LOCK)
                runtime->hw.rate_min = runtime->hw.rate_max = chip->locked_rate;
        chip->capture_substream = substream;
index 3094f3852167c57585ff58418d3d92b45e8a1aea..efa9d5c2558a7a5b4cfcf75890523fcf6faafb79 100644 (file)
@@ -128,7 +128,7 @@ static int snd_sbdsp_probe(struct snd_sb * chip)
        minor = version & 0xff;
        snd_printdd("SB [0x%lx]: DSP chip found, version = %i.%i\n",
                    chip->port, major, minor);
-       
+
        switch (chip->hardware) {
        case SB_HW_AUTO:
                switch (major) {
@@ -168,6 +168,9 @@ static int snd_sbdsp_probe(struct snd_sb * chip)
        case SB_HW_DT019X:
                str = "(DT019X/ALS007)";
                break;
+       case SB_HW_CS5530:
+               str = "16 (CS5530)";
+               break;
        default:
                return -ENODEV;
        }
index 490b1ca5cf5882c3cff630dca4f637697e32117c..3d4befcff28efaf732167059ab3120c2a43f08ce 100644 (file)
@@ -821,6 +821,7 @@ int snd_sbmixer_new(struct snd_sb *chip)
                break;
        case SB_HW_16:
        case SB_HW_ALS100:
+       case SB_HW_CS5530:
                if ((err = snd_sbmixer_init(chip,
                                            snd_sb16_controls,
                                            ARRAY_SIZE(snd_sb16_controls),
@@ -950,6 +951,7 @@ void snd_sbmixer_suspend(struct snd_sb *chip)
                break;
        case SB_HW_16:
        case SB_HW_ALS100:
+       case SB_HW_CS5530:
                save_mixer(chip, sb16_saved_regs, ARRAY_SIZE(sb16_saved_regs));
                break;
        case SB_HW_ALS4000:
@@ -975,6 +977,7 @@ void snd_sbmixer_resume(struct snd_sb *chip)
                break;
        case SB_HW_16:
        case SB_HW_ALS100:
+       case SB_HW_CS5530:
                restore_mixer(chip, sb16_saved_regs, ARRAY_SIZE(sb16_saved_regs));
                break;
        case SB_HW_ALS4000:
index 61e35ecc57b8586eacc939111938a2ca2ad01c4b..fa17786e1587de310f4e13dbbff8fe7b06845c04 100644 (file)
@@ -215,6 +215,16 @@ config SND_CS46XX_NEW_DSP
 
          This works better than the old code, so say Y.
 
+config SND_CS5530
+       tristate "CS5530 Audio"
+       depends on SND && ISA_DMA_API
+       select SND_SB16
+       help
+         Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
+
+         To compile this driver as a module, choose M here: the module
+         will be called snd-cs5530.
+
 config SND_CS5535AUDIO
        tristate "CS5535/CS5536 Audio"
        depends on SND && X86 && !X86_64
index e06736da9ef196e8fc766d2c2c96a8f7258ec94d..cd76e0293d06b53d2e74e1ccc87b1181e320c59a 100644 (file)
@@ -12,6 +12,7 @@ snd-azt3328-objs := azt3328.o
 snd-bt87x-objs := bt87x.o
 snd-cmipci-objs := cmipci.o
 snd-cs4281-objs := cs4281.o
+snd-cs5530-objs := cs5530.o
 snd-ens1370-objs := ens1370.o
 snd-ens1371-objs := ens1371.o
 snd-es1938-objs := es1938.o
@@ -36,6 +37,7 @@ obj-$(CONFIG_SND_AZT3328) += snd-azt3328.o
 obj-$(CONFIG_SND_BT87X) += snd-bt87x.o
 obj-$(CONFIG_SND_CMIPCI) += snd-cmipci.o
 obj-$(CONFIG_SND_CS4281) += snd-cs4281.o
+obj-$(CONFIG_SND_CS5530) += snd-cs5530.o
 obj-$(CONFIG_SND_ENS1370) += snd-ens1370.o
 obj-$(CONFIG_SND_ENS1371) += snd-ens1371.o
 obj-$(CONFIG_SND_ES1938) += snd-es1938.o
diff --git a/sound/pci/cs5530.c b/sound/pci/cs5530.c
new file mode 100644 (file)
index 0000000..240a0a4
--- /dev/null
@@ -0,0 +1,306 @@
+/*
+ * cs5530.c - Initialisation code for Cyrix/NatSemi VSA1 softaudio
+ *
+ *     (C) Copyright 2007 Ash Willis <ashwillis@programmer.net>
+ *     (C) Copyright 2003 Red Hat Inc <alan@redhat.com>
+ *
+ * This driver was ported (shamelessly ripped ;) from oss/kahlua.c but I did
+ * mess with it a bit. The chip seems to have to have trouble with full duplex
+ * mode. If we're recording in 8bit 8000kHz, say, and we then attempt to
+ * simultaneously play back audio at 16bit 44100kHz, the device actually plays
+ * back in the same format in which it is capturing. By forcing the chip to
+ * always play/capture in 16/44100, we can let alsa-lib convert the samples and
+ * that way we can hack up some full duplex audio. 
+ * 
+ * XpressAudio(tm) is used on the Cyrix MediaGX (now NatSemi Geode) systems.
+ * The older version (VSA1) provides fairly good soundblaster emulation
+ * although there are a couple of bugs: large DMA buffers break record,
+ * and the MPU event handling seems suspect. VSA2 allows the native driver
+ * to control the AC97 audio engine directly and requires a different driver.
+ *
+ * Thanks to National Semiconductor for providing the needed information
+ * on the XpressAudio(tm) internals.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * TO DO:
+ *     Investigate whether we can portably support Cognac (5520) in the
+ *     same manner.
+ */
+
+#include <sound/driver.h>
+#include <linux/delay.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <sound/core.h>
+#include <sound/sb.h>
+#include <sound/initval.h>
+
+MODULE_AUTHOR("Ash Willis");
+MODULE_DESCRIPTION("CS5530 Audio");
+MODULE_LICENSE("GPL");
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+struct snd_cs5530 {
+       struct snd_card *card;
+       struct pci_dev *pci;
+       struct snd_sb *sb;
+       unsigned long pci_base;
+};
+
+static struct pci_device_id snd_cs5530_ids[] = {
+       {PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO, PCI_ANY_ID,
+                                                       PCI_ANY_ID, 0, 0},
+       {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, snd_cs5530_ids);
+
+static int snd_cs5530_free(struct snd_cs5530 *chip)
+{
+       pci_release_regions(chip->pci);
+       pci_disable_device(chip->pci);
+       kfree(chip);
+       return 0;
+}
+
+static int snd_cs5530_dev_free(struct snd_device *device)
+{
+       struct snd_cs5530 *chip = device->device_data;
+       return snd_cs5530_free(chip);
+}
+
+static void __devexit snd_cs5530_remove(struct pci_dev *pci)
+{
+       snd_card_free(pci_get_drvdata(pci));
+       pci_set_drvdata(pci, NULL);
+}
+
+static u8 __devinit snd_cs5530_mixer_read(unsigned long io, u8 reg)
+{
+       outb(reg, io + 4);
+       udelay(20);
+       reg = inb(io + 5);
+       udelay(20);
+       return reg;
+}
+
+static int __devinit snd_cs5530_create(struct snd_card *card,
+                                      struct pci_dev *pci,
+                                      struct snd_cs5530 **rchip)
+{
+       struct snd_cs5530 *chip;
+       unsigned long sb_base;
+       u8 irq, dma8, dma16 = 0;
+       u16 map;
+       void __iomem *mem;
+       int err;
+
+       static struct snd_device_ops ops = {
+               .dev_free = snd_cs5530_dev_free,
+       };
+       *rchip = NULL;
+
+       err = pci_enable_device(pci);
+       if (err < 0)
+               return err;
+
+       chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+       if (chip == NULL) {
+               pci_disable_device(pci);
+               return -ENOMEM;
+       }
+
+       chip->card = card;
+       chip->pci = pci;
+
+       err = pci_request_regions(pci, "CS5530");
+       if (err < 0) {
+               kfree(chip); 
+               pci_disable_device(pci);
+               return err;
+       }
+       chip->pci_base = pci_resource_start(pci, 0);
+
+       mem = ioremap_nocache(chip->pci_base, pci_resource_len(pci, 0));
+       if (mem == NULL) {
+               kfree(chip);
+               pci_disable_device(pci);
+               return -EBUSY;
+       }
+
+       map = readw(mem + 0x18);
+       iounmap(mem);
+
+       /* Map bits
+               0:1     * 0x20 + 0x200 = sb base
+               2       sb enable
+               3       adlib enable
+               5       MPU enable 0x330
+               6       MPU enable 0x300
+
+          The other bits may be used internally so must be masked */
+
+       sb_base = 0x220 + 0x20 * (map & 3);
+
+       if (map & (1<<2))
+               printk(KERN_INFO "CS5530: XpressAudio at 0x%lx\n", sb_base);
+       else {
+               printk(KERN_ERR "Could not find XpressAudio!\n");
+               snd_cs5530_free(chip);
+               return -ENODEV;
+       }
+
+       if (map & (1<<5))
+               printk(KERN_INFO "CS5530: MPU at 0x300\n");
+       else if (map & (1<<6))
+               printk(KERN_INFO "CS5530: MPU at 0x330\n");
+
+       irq = snd_cs5530_mixer_read(sb_base, 0x80) & 0x0F;
+       dma8 = snd_cs5530_mixer_read(sb_base, 0x81);
+
+       if (dma8 & 0x20)
+               dma16 = 5;
+       else if (dma8 & 0x40)
+               dma16 = 6;
+       else if (dma8 & 0x80)
+               dma16 = 7;
+       else {
+               printk(KERN_ERR "CS5530: No 16bit DMA enabled\n");
+               snd_cs5530_free(chip);
+               return -ENODEV;
+       }
+
+       if (dma8 & 0x01)
+               dma8 = 0;
+       else if (dma8 & 02)
+               dma8 = 1;
+       else if (dma8 & 0x08)
+               dma8 = 3;
+       else {
+               printk(KERN_ERR "CS5530: No 8bit DMA enabled\n");
+               snd_cs5530_free(chip);
+               return -ENODEV;
+       }
+
+       if (irq & 1)
+               irq = 9;
+       else if (irq & 2)
+               irq = 5;
+       else if (irq & 4)
+               irq = 7;
+       else if (irq & 8)
+               irq = 10;
+       else {
+               printk(KERN_ERR "CS5530: SoundBlaster IRQ not set\n");
+               snd_cs5530_free(chip);
+               return -ENODEV;
+       }
+
+       printk(KERN_INFO "CS5530: IRQ: %d DMA8: %d DMA16: %d\n", irq, dma8, 
+                                                                       dma16);
+
+       err = snd_sbdsp_create(card, sb_base, irq, snd_sb16dsp_interrupt, dma8,
+                                               dma16, SB_HW_CS5530, &chip->sb);
+       if (err < 0) {
+               printk(KERN_ERR "CS5530: Could not create SoundBlaster\n");
+               snd_cs5530_free(chip);
+               return err;
+       }
+
+       err = snd_sb16dsp_pcm(chip->sb, 0, &chip->sb->pcm);
+       if (err < 0) {
+               printk(KERN_ERR "CS5530: Could not create PCM\n");
+               snd_cs5530_free(chip);
+               return err;
+       }
+
+       err = snd_sbmixer_new(chip->sb);
+       if (err < 0) {
+               printk(KERN_ERR "CS5530: Could not create Mixer\n");
+               snd_cs5530_free(chip);
+               return err;
+       }
+
+       err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+       if (err < 0) {
+               snd_cs5530_free(chip);
+               return err;
+       }
+
+       snd_card_set_dev(card, &pci->dev);
+       *rchip = chip;
+       return 0;
+}
+
+static int __devinit snd_cs5530_probe(struct pci_dev *pci,
+                                       const struct pci_device_id *pci_id)
+{
+       static int dev;
+       struct snd_card *card;
+       struct snd_cs5530 *chip = NULL;
+       int err;
+
+       if (dev >= SNDRV_CARDS)
+               return -ENODEV;
+       if (!enable[dev]) {
+               dev++;
+               return -ENOENT;
+       }
+
+       card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
+
+       if (card == NULL)
+               return -ENOMEM;
+
+       err = snd_cs5530_create(card, pci, &chip);
+       if (err < 0) {
+               snd_card_free(card);
+               return err;
+       }
+
+       strcpy(card->driver, "CS5530");
+       strcpy(card->shortname, "CS5530 Audio");
+       sprintf(card->longname, "%s at 0x%lx", card->shortname, chip->pci_base);
+
+       err = snd_card_register(card);
+       if (err < 0) {
+               snd_card_free(card);
+               return err;
+       }
+       pci_set_drvdata(pci, card);
+       dev++;
+       return 0;
+}
+
+static struct pci_driver driver = {
+       .name = "CS5530_Audio",
+       .id_table = snd_cs5530_ids,
+       .probe = snd_cs5530_probe,
+       .remove = __devexit_p(snd_cs5530_remove),
+};
+
+static int __init alsa_card_cs5530_init(void)
+{
+       return pci_register_driver(&driver);
+}
+
+static void __exit alsa_card_cs5530_exit(void)
+{
+       pci_unregister_driver(&driver);
+}
+
+module_init(alsa_card_cs5530_init)
+module_exit(alsa_card_cs5530_exit)
+