]> err.no Git - linux-2.6/commitdiff
spi: spi_bfin cleanups, error handling
authorBryan Wu <bryan.wu@analog.com>
Wed, 5 Dec 2007 07:45:13 +0000 (23:45 -0800)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Wed, 5 Dec 2007 17:21:19 +0000 (09:21 -0800)
Cleanup and error handling

 - add error handling in SPI bus driver with selecting clients
 - use proper defines to access Blackfin MMRs
 - remove useless SSYNCs
 - cleaner use of portmux calls

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/spi/spi_bfin5xx.c

index 759a6fc9b4d4c88e0e155124025293519e960401..803c5b25db505faca18218a20c5c6516a91f8f3d 100644 (file)
@@ -59,10 +59,9 @@ MODULE_LICENSE("GPL");
 
 #define DEFINE_SPI_REG(reg, off) \
 static inline u16 read_##reg(void) \
-            { return *(volatile unsigned short*)(SPI0_REGBASE + off); } \
+       { return bfin_read16(SPI0_REGBASE + off); } \
 static inline void write_##reg(u16 v) \
-            {*(volatile unsigned short*)(SPI0_REGBASE + off) = v;\
-             SSYNC();}
+       {bfin_write16(SPI0_REGBASE + off, v); }
 
 DEFINE_SPI_REG(CTRL, 0x00)
 DEFINE_SPI_REG(FLAG, 0x04)
@@ -145,7 +144,6 @@ static void bfin_spi_enable(struct driver_data *drv_data)
 
        cr = read_CTRL();
        write_CTRL(cr | BIT_CTL_ENABLE);
-       SSYNC();
 }
 
 static void bfin_spi_disable(struct driver_data *drv_data)
@@ -154,7 +152,6 @@ static void bfin_spi_disable(struct driver_data *drv_data)
 
        cr = read_CTRL();
        write_CTRL(cr & (~BIT_CTL_ENABLE));
-       SSYNC();
 }
 
 /* Caculate the SPI_BAUD register value based on input HZ */
@@ -182,52 +179,44 @@ static int flush(struct driver_data *drv_data)
        return limit;
 }
 
+#define MAX_SPI0_SSEL  7
+
 /* stop controller and re-config current chip*/
-static void restore_state(struct driver_data *drv_data)
+static int restore_state(struct driver_data *drv_data)
 {
        struct chip_data *chip = drv_data->cur_chip;
+       int ret = 0;
+       u16 ssel[MAX_SPI0_SSEL] = {P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
+                                       P_SPI0_SSEL4, P_SPI0_SSEL5,
+                                       P_SPI0_SSEL6, P_SPI0_SSEL7,};
 
        /* Clear status and disable clock */
        write_STAT(BIT_STAT_CLR);
        bfin_spi_disable(drv_data);
        dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n");
 
+       /* Load the registers */
+       write_CTRL(chip->ctl_reg);
+       write_BAUD(chip->baud);
+       write_FLAG(chip->flag);
+
        if (!chip->chip_select_requested) {
+               int i = chip->chip_select_num;
 
-               dev_dbg(&drv_data->pdev->dev,
-               "chip select number is %d\n", chip->chip_select_num);
-
-               switch (chip->chip_select_num) {
-               case 1:
-                       peripheral_request(P_SPI0_SSEL1, DRV_NAME);
-                       break;
-               case 2:
-                       peripheral_request(P_SPI0_SSEL2, DRV_NAME);
-                       break;
-               case 3:
-                       peripheral_request(P_SPI0_SSEL3, DRV_NAME);
-                       break;
-               case 4:
-                       peripheral_request(P_SPI0_SSEL4, DRV_NAME);
-                       break;
-               case 5:
-                       peripheral_request(P_SPI0_SSEL5, DRV_NAME);
-                       break;
-               case 6:
-                       peripheral_request(P_SPI0_SSEL6, DRV_NAME);
-                       break;
-               case 7:
-                       peripheral_request(P_SPI0_SSEL7, DRV_NAME);
-                       break;
-               }
+               dev_dbg(&drv_data->pdev->dev, "chip select number is %d\n", i);
+
+               if ((i > 0) && (i <= MAX_SPI0_SSEL))
+                       ret = peripheral_request(ssel[i-1], DRV_NAME);
 
                chip->chip_select_requested = 1;
        }
 
-       /* Load the registers */
-       write_CTRL(chip->ctl_reg);
-       write_BAUD(chip->baud);
-       write_FLAG(chip->flag);
+       if (ret)
+               dev_dbg(&drv_data->pdev->dev,
+                       ": request chip select number %d failed\n",
+                       chip->chip_select_num);
+
+       return ret;
 }
 
 /* used to kick off transfer in rx mode */
@@ -285,7 +274,6 @@ static void u8_cs_chg_writer(struct driver_data *drv_data)
 
        while (drv_data->tx < drv_data->tx_end) {
                write_FLAG(chip->flag);
-               SSYNC();
 
                write_TDBR(*(u8 *) (drv_data->tx));
                while (read_STAT() & BIT_STAT_TXS)
@@ -293,13 +281,13 @@ static void u8_cs_chg_writer(struct driver_data *drv_data)
                while (!(read_STAT() & BIT_STAT_SPIF))
                        continue;
                write_FLAG(0xFF00 | chip->flag);
-               SSYNC();
+
                if (chip->cs_chg_udelay)
                        udelay(chip->cs_chg_udelay);
                ++drv_data->tx;
        }
        write_FLAG(0xFF00);
-       SSYNC();
+
 }
 
 static void u8_reader(struct driver_data *drv_data)
@@ -331,7 +319,6 @@ static void u8_cs_chg_reader(struct driver_data *drv_data)
 
        while (drv_data->rx < drv_data->rx_end) {
                write_FLAG(chip->flag);
-               SSYNC();
 
                read_RDBR();    /* kick off */
                while (!(read_STAT() & BIT_STAT_RXS))
@@ -340,13 +327,13 @@ static void u8_cs_chg_reader(struct driver_data *drv_data)
                        continue;
                *(u8 *) (drv_data->rx) = read_SHAW();
                write_FLAG(0xFF00 | chip->flag);
-               SSYNC();
+
                if (chip->cs_chg_udelay)
                        udelay(chip->cs_chg_udelay);
                ++drv_data->rx;
        }
        write_FLAG(0xFF00);
-       SSYNC();
+
 }
 
 static void u8_duplex(struct driver_data *drv_data)
@@ -370,7 +357,7 @@ static void u8_cs_chg_duplex(struct driver_data *drv_data)
 
        while (drv_data->rx < drv_data->rx_end) {
                write_FLAG(chip->flag);
-               SSYNC();
+
 
                write_TDBR(*(u8 *) (drv_data->tx));
                while (!(read_STAT() & BIT_STAT_SPIF))
@@ -379,14 +366,14 @@ static void u8_cs_chg_duplex(struct driver_data *drv_data)
                        continue;
                *(u8 *) (drv_data->rx) = read_RDBR();
                write_FLAG(0xFF00 | chip->flag);
-               SSYNC();
+
                if (chip->cs_chg_udelay)
                        udelay(chip->cs_chg_udelay);
                ++drv_data->rx;
                ++drv_data->tx;
        }
        write_FLAG(0xFF00);
-       SSYNC();
+
 }
 
 static void u16_writer(struct driver_data *drv_data)
@@ -412,7 +399,6 @@ static void u16_cs_chg_writer(struct driver_data *drv_data)
 
        while (drv_data->tx < drv_data->tx_end) {
                write_FLAG(chip->flag);
-               SSYNC();
 
                write_TDBR(*(u16 *) (drv_data->tx));
                while ((read_STAT() & BIT_STAT_TXS))
@@ -420,13 +406,12 @@ static void u16_cs_chg_writer(struct driver_data *drv_data)
                while (!(read_STAT() & BIT_STAT_SPIF))
                        continue;
                write_FLAG(0xFF00 | chip->flag);
-               SSYNC();
+
                if (chip->cs_chg_udelay)
                        udelay(chip->cs_chg_udelay);
                drv_data->tx += 2;
        }
        write_FLAG(0xFF00);
-       SSYNC();
 }
 
 static void u16_reader(struct driver_data *drv_data)
@@ -454,7 +439,6 @@ static void u16_cs_chg_reader(struct driver_data *drv_data)
 
        while (drv_data->rx < drv_data->rx_end) {
                write_FLAG(chip->flag);
-               SSYNC();
 
                read_RDBR();    /* kick off */
                while (!(read_STAT() & BIT_STAT_RXS))
@@ -463,13 +447,12 @@ static void u16_cs_chg_reader(struct driver_data *drv_data)
                        continue;
                *(u16 *) (drv_data->rx) = read_SHAW();
                write_FLAG(0xFF00 | chip->flag);
-               SSYNC();
+
                if (chip->cs_chg_udelay)
                        udelay(chip->cs_chg_udelay);
                drv_data->rx += 2;
        }
        write_FLAG(0xFF00);
-       SSYNC();
 }
 
 static void u16_duplex(struct driver_data *drv_data)
@@ -493,7 +476,6 @@ static void u16_cs_chg_duplex(struct driver_data *drv_data)
 
        while (drv_data->tx < drv_data->tx_end) {
                write_FLAG(chip->flag);
-               SSYNC();
 
                write_TDBR(*(u16 *) (drv_data->tx));
                while (!(read_STAT() & BIT_STAT_SPIF))
@@ -502,14 +484,13 @@ static void u16_cs_chg_duplex(struct driver_data *drv_data)
                        continue;
                *(u16 *) (drv_data->rx) = read_RDBR();
                write_FLAG(0xFF00 | chip->flag);
-               SSYNC();
+
                if (chip->cs_chg_udelay)
                        udelay(chip->cs_chg_udelay);
                drv_data->rx += 2;
                drv_data->tx += 2;
        }
        write_FLAG(0xFF00);
-       SSYNC();
 }
 
 /* test if ther is more transfer to be done */
@@ -811,7 +792,6 @@ static void pump_transfers(unsigned long data)
                                "IO duplex: cr is 0x%x\n", cr);
 
                        write_CTRL(cr);
-                       SSYNC();
 
                        drv_data->duplex(drv_data);
 
@@ -826,7 +806,6 @@ static void pump_transfers(unsigned long data)
                                "IO write: cr is 0x%x\n", cr);
 
                        write_CTRL(cr);
-                       SSYNC();
 
                        drv_data->write(drv_data);
 
@@ -841,7 +820,6 @@ static void pump_transfers(unsigned long data)
                                "IO read: cr is 0x%x\n", cr);
 
                        write_CTRL(cr);
-                       SSYNC();
 
                        drv_data->read(drv_data);
                        if (drv_data->rx != drv_data->rx_end)
@@ -892,6 +870,14 @@ static void pump_messages(struct work_struct *work)
        /* Extract head of queue */
        drv_data->cur_msg = list_entry(drv_data->queue.next,
                                       struct spi_message, queue);
+
+       /* Setup the SSP using the per chip configuration */
+       drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
+       if (restore_state(drv_data)) {
+               spin_unlock_irqrestore(&drv_data->lock, flags);
+               return;
+       };
+
        list_del_init(&drv_data->cur_msg->queue);
 
        /* Initial message state */
@@ -899,13 +885,10 @@ static void pump_messages(struct work_struct *work)
        drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
                                            struct spi_transfer, transfer_list);
 
-       /* Setup the SSP using the per chip configuration */
-       drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
-       restore_state(drv_data);
-       dev_dbg(&drv_data->pdev->dev,
-               "got a message to pump, state is set to: baud %d, flag 0x%x, ctl 0x%x\n",
-               drv_data->cur_chip->baud, drv_data->cur_chip->flag,
-               drv_data->cur_chip->ctl_reg);
+       dev_dbg(&drv_data->pdev->dev, "got a message to pump, "
+               "state is set to: baud %d, flag 0x%x, ctl 0x%x\n",
+               drv_data->cur_chip->baud, drv_data->cur_chip->flag,
+               drv_data->cur_chip->ctl_reg);
 
        dev_dbg(&drv_data->pdev->dev,
                "the first transfer len is %d\n",