]> err.no Git - linux-2.6/commitdiff
bnx2: Support secondary MAC addresses.
authorBenjamin Li <benli@broadcom.com>
Tue, 15 Jul 2008 05:39:52 +0000 (22:39 -0700)
committerDavid S. Miller <davem@davemloft.net>
Tue, 15 Jul 2008 05:39:52 +0000 (22:39 -0700)
Add support for configuring secondary unicast addresses.  There
are 4 additional perfect match filters which can be used for
secondary unicast address support.

  *  Modified bnx2_set_mac_addr() to be more generic in handling
     the setting of the perfect match filters
  *  Changed bnx2_set_rx_mode() to handle the unicast dev_addr_list

Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/bnx2.c
drivers/net/bnx2.h

index 2d0213ed6e7d68be5ff7ec59b842cd9f45941f6f..0d0bb93d1cf8d7eec5db0968f4209d8c6bcc4452 100644 (file)
@@ -2451,19 +2451,18 @@ bnx2_alloc_bad_rbuf(struct bnx2 *bp)
 }
 
 static void
-bnx2_set_mac_addr(struct bnx2 *bp)
+bnx2_set_mac_addr(struct bnx2 *bp, u8 *mac_addr, u32 pos)
 {
        u32 val;
-       u8 *mac_addr = bp->dev->dev_addr;
 
        val = (mac_addr[0] << 8) | mac_addr[1];
 
-       REG_WR(bp, BNX2_EMAC_MAC_MATCH0, val);
+       REG_WR(bp, BNX2_EMAC_MAC_MATCH0 + (pos * 8), val);
 
        val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
                (mac_addr[4] << 8) | mac_addr[5];
 
-       REG_WR(bp, BNX2_EMAC_MAC_MATCH1, val);
+       REG_WR(bp, BNX2_EMAC_MAC_MATCH1 + (pos * 8), val);
 }
 
 static inline int
@@ -3223,6 +3222,7 @@ bnx2_set_rx_mode(struct net_device *dev)
 {
        struct bnx2 *bp = netdev_priv(dev);
        u32 rx_mode, sort_mode;
+       struct dev_addr_list *uc_ptr;
        int i;
 
        spin_lock_bh(&bp->phy_lock);
@@ -3278,6 +3278,25 @@ bnx2_set_rx_mode(struct net_device *dev)
                sort_mode |= BNX2_RPM_SORT_USER0_MC_HSH_EN;
        }
 
+       uc_ptr = NULL;
+       if (dev->uc_count > BNX2_MAX_UNICAST_ADDRESSES) {
+               rx_mode |= BNX2_EMAC_RX_MODE_PROMISCUOUS;
+               sort_mode |= BNX2_RPM_SORT_USER0_PROM_EN |
+                            BNX2_RPM_SORT_USER0_PROM_VLAN;
+       } else if (!(dev->flags & IFF_PROMISC)) {
+               uc_ptr = dev->uc_list;
+
+               /* Add all entries into to the match filter list */
+               for (i = 0; i < dev->uc_count; i++) {
+                       bnx2_set_mac_addr(bp, uc_ptr->da_addr,
+                                         i + BNX2_START_UNICAST_ADDRESS_INDEX);
+                       sort_mode |= (1 <<
+                                     (i + BNX2_START_UNICAST_ADDRESS_INDEX));
+                       uc_ptr = uc_ptr->next;
+               }
+
+       }
+
        if (rx_mode != bp->rx_mode) {
                bp->rx_mode = rx_mode;
                REG_WR(bp, BNX2_EMAC_RX_MODE, rx_mode);
@@ -3562,7 +3581,7 @@ bnx2_set_power_state(struct bnx2 *bp, pci_power_t state)
                        bp->autoneg = autoneg;
                        bp->advertising = advertising;
 
-                       bnx2_set_mac_addr(bp);
+                       bnx2_set_mac_addr(bp, bp->dev->dev_addr, 0);
 
                        val = REG_RD(bp, BNX2_EMAC_MODE);
 
@@ -4472,7 +4491,7 @@ bnx2_init_chip(struct bnx2 *bp)
 
        bnx2_init_nvram(bp);
 
-       bnx2_set_mac_addr(bp);
+       bnx2_set_mac_addr(bp, bp->dev->dev_addr, 0);
 
        val = REG_RD(bp, BNX2_MQ_CONFIG);
        val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE;
@@ -7100,7 +7119,7 @@ bnx2_change_mac_addr(struct net_device *dev, void *p)
 
        memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
        if (netif_running(dev))
-               bnx2_set_mac_addr(bp);
+               bnx2_set_mac_addr(bp, bp->dev->dev_addr, 0);
 
        return 0;
 }
@@ -7643,7 +7662,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
        dev->hard_start_xmit = bnx2_start_xmit;
        dev->stop = bnx2_close;
        dev->get_stats = bnx2_get_stats;
-       dev->set_multicast_list = bnx2_set_rx_mode;
+       dev->set_rx_mode = bnx2_set_rx_mode;
        dev->do_ioctl = bnx2_ioctl;
        dev->set_mac_address = bnx2_change_mac_addr;
        dev->change_mtu = bnx2_change_mtu;
index 7b882fd9d57f2b0b0595603dc6fc3b81eeaf6a6c..bb7b5d5471dde61b9321959cf227921ef6995171 100644 (file)
@@ -6440,6 +6440,11 @@ struct l2_fhdr {
 
 #define BNX2_MISC_ENABLE_DEFAULT       0x17ffffff
 
+#define BNX2_START_UNICAST_ADDRESS_INDEX       4
+#define BNX2_END_UNICAST_ADDRESS_INDEX         7
+#define BNX2_MAX_UNICAST_ADDRESSES             (BNX2_END_UNICAST_ADDRESS_INDEX - \
+                                        BNX2_START_UNICAST_ADDRESS_INDEX + 1)
+
 #define DMA_READ_CHANS 5
 #define DMA_WRITE_CHANS        3