--- /dev/null
+/*
+ * linux/drivers/mfd/mcp-sa11x0.c
+ *
+ * Copyright (C) 2001-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * SA11x0 MCP (Multimedia Communications Port) driver.
+ *
+ * MCP read/write timeouts from Jordi Colomer, rehacked by rmk.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+
+#include <asm/dma.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/system.h>
+
+#include <asm/arch/assabet.h>
+
+#include "mcp.h"
+
+struct mcp_sa11x0 {
+ u32 mccr0;
+ u32 mccr1;
+};
+
+#define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp))
+
+static void
+mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor)
+{
+ unsigned int mccr0;
+
+ divisor /= 32;
+
+ mccr0 = Ser4MCCR0 & ~0x00007f00;
+ mccr0 |= divisor << 8;
+ Ser4MCCR0 = mccr0;
+}
+
+static void
+mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor)
+{
+ unsigned int mccr0;
+
+ divisor /= 32;
+
+ mccr0 = Ser4MCCR0 & ~0x0000007f;
+ mccr0 |= divisor;
+ Ser4MCCR0 = mccr0;
+}
+
+/*
+ * Write data to the device. The bit should be set after 3 subframe
+ * times (each frame is 64 clocks). We wait a maximum of 6 subframes.
+ * We really should try doing something more productive while we
+ * wait.
+ */
+static void
+mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val)
+{
+ int ret = -ETIME;
+ int i;
+
+ Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff);
+
+ for (i = 0; i < 2; i++) {
+ udelay(mcp->rw_timeout);
+ if (Ser4MCSR & MCSR_CWC) {
+ ret = 0;
+ break;
+ }
+ }
+
+ if (ret < 0)
+ printk(KERN_WARNING "mcp: write timed out\n");
+}
+
+/*
+ * Read data from the device. The bit should be set after 3 subframe
+ * times (each frame is 64 clocks). We wait a maximum of 6 subframes.
+ * We really should try doing something more productive while we
+ * wait.
+ */
+static unsigned int
+mcp_sa11x0_read(struct mcp *mcp, unsigned int reg)
+{
+ int ret = -ETIME;
+ int i;
+
+ Ser4MCDR2 = reg << 17 | MCDR2_Rd;
+
+ for (i = 0; i < 2; i++) {
+ udelay(mcp->rw_timeout);
+ if (Ser4MCSR & MCSR_CRC) {
+ ret = Ser4MCDR2 & 0xffff;
+ break;
+ }
+ }
+
+ if (ret < 0)
+ printk(KERN_WARNING "mcp: read timed out\n");
+
+ return ret;
+}
+
+static void mcp_sa11x0_enable(struct mcp *mcp)
+{
+ Ser4MCSR = -1;
+ Ser4MCCR0 |= MCCR0_MCE;
+}
+
+static void mcp_sa11x0_disable(struct mcp *mcp)
+{
+ Ser4MCCR0 &= ~MCCR0_MCE;
+}
+
+/*
+ * Our methods.
+ */
+static struct mcp_ops mcp_sa11x0 = {
+ .set_telecom_divisor = mcp_sa11x0_set_telecom_divisor,
+ .set_audio_divisor = mcp_sa11x0_set_audio_divisor,
+ .reg_write = mcp_sa11x0_write,
+ .reg_read = mcp_sa11x0_read,
+ .enable = mcp_sa11x0_enable,
+ .disable = mcp_sa11x0_disable,
+};
+
+static int mcp_sa11x0_probe(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct mcp *mcp;
+ int ret;
+
+ if (!machine_is_adsbitsy() && !machine_is_assabet() &&
+ !machine_is_cerf() && !machine_is_flexanet() &&
+ !machine_is_freebird() && !machine_is_graphicsclient() &&
+ !machine_is_graphicsmaster() && !machine_is_lart() &&
+ !machine_is_omnimeter() && !machine_is_pfs168() &&
+ !machine_is_shannon() && !machine_is_simpad() &&
+ !machine_is_yopy())
+ return -ENODEV;
+
+ if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp"))
+ return -EBUSY;
+
+ mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0));
+ if (!mcp) {
+ ret = -ENOMEM;
+ goto release;
+ }
+
+ mcp->owner = THIS_MODULE;
+ mcp->ops = &mcp_sa11x0;
+ mcp->sclk_rate = 11981000,
+ mcp->dma_audio_rd = DMA_Ser4MCP0Rd;
+ mcp->dma_audio_wr = DMA_Ser4MCP0Wr;
+ mcp->dma_telco_rd = DMA_Ser4MCP1Rd;
+ mcp->dma_telco_wr = DMA_Ser4MCP1Wr;
+
+ dev_set_drvdata(dev, mcp);
+
+ if (machine_is_assabet()) {
+ ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
+ }
+
+ /*
+ * Setup the PPC unit correctly.
+ */
+ PPDR &= ~PPC_RXD4;
+ PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+ PSDR |= PPC_RXD4;
+ PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+ PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
+ Ser4MCSR = -1;
+ Ser4MCCR1 = 0;
+ Ser4MCCR0 = 0x00007f7f | MCCR0_ADM;
+
+ /*
+ * Calculate the read/write timeout (us) from the bit clock
+ * rate. This is the period for 3 64-bit frames. Always
+ * round this time up.
+ */
+ mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) /
+ mcp->sclk_rate;
+
+ ret = mcp_host_register(mcp);
+ if (ret == 0)
+ goto out;
+
+ release:
+ release_mem_region(0x80060000, 0x60);
+ dev_set_drvdata(dev, NULL);
+
+ out:
+ return ret;
+}
+
+static int mcp_sa11x0_remove(struct device *dev)
+{
+ struct mcp *mcp = dev_get_drvdata(dev);
+
+ dev_set_drvdata(dev, NULL);
+ mcp_host_unregister(mcp);
+ release_mem_region(0x80060000, 0x60);
+
+ return 0;
+}
+
+static int mcp_sa11x0_suspend(struct device *dev, pm_message_t state, u32 level)
+{
+ struct mcp *mcp = dev_get_drvdata(dev);
+
+ if (level == SUSPEND_DISABLE) {
+ priv(mcp)->mccr0 = Ser4MCCR0;
+ priv(mcp)->mccr1 = Ser4MCCR1;
+ Ser4MCCR0 &= ~MCCR0_MCE;
+ }
+ return 0;
+}
+
+static int mcp_sa11x0_resume(struct device *dev, u32 level)
+{
+ struct mcp *mcp = dev_get_drvdata(dev);
+
+ if (level == RESUME_RESTORE_STATE) {
+ Ser4MCCR1 = priv(mcp)->mccr1;
+ Ser4MCCR0 = priv(mcp)->mccr0;
+ }
+ return 0;
+}
+
+/*
+ * The driver for the SA11x0 MCP port.
+ */
+static struct device_driver mcp_sa11x0_driver = {
+ .name = "sa11x0-mcp",
+ .bus = &platform_bus_type,
+ .probe = mcp_sa11x0_probe,
+ .remove = mcp_sa11x0_remove,
+ .suspend = mcp_sa11x0_suspend,
+ .resume = mcp_sa11x0_resume,
+};
+
+/*
+ * This needs re-working
+ */
+static int __init mcp_sa11x0_init(void)
+{
+ return driver_register(&mcp_sa11x0_driver);
+}
+
+static void __exit mcp_sa11x0_exit(void)
+{
+ driver_unregister(&mcp_sa11x0_driver);
+}
+
+module_init(mcp_sa11x0_init);
+module_exit(mcp_sa11x0_exit);
+
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("SA11x0 multimedia communications port driver");
+MODULE_LICENSE("GPL");
projects / linux-2.6 / commitdiff