[PATCH] skge: better flow control negotiation

Do flow control negotiation properly. Don't let auto negotiation
status limit renegotiation. Separate desired pause values from
the result of auto negotiation.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index c19f49bce7af41678b4ef58a16e4e8344a26b313..d844a837a8f24be0200c2012e70a4497e1e3e93d 100644 (file)
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -487,31 +487,37 @@ static void skge_get_pauseparam(struct net_device *dev,
 {
        struct skge_port *skge = netdev_priv(dev);
 
-       ecmd->tx_pause = (skge->flow_control == FLOW_MODE_LOC_SEND)
-               || (skge->flow_control == FLOW_MODE_SYMMETRIC);
-       ecmd->rx_pause = (skge->flow_control == FLOW_MODE_REM_SEND)
-               || (skge->flow_control == FLOW_MODE_SYMMETRIC);
+       ecmd->rx_pause = (skge->flow_control == FLOW_MODE_SYMMETRIC)
+               || (skge->flow_control == FLOW_MODE_SYM_OR_REM);
+       ecmd->tx_pause = ecmd->rx_pause || (skge->flow_control == FLOW_MODE_LOC_SEND);
 
-       ecmd->autoneg = skge->autoneg;
+       ecmd->autoneg = ecmd->rx_pause || ecmd->tx_pause;
 }
 
 static int skge_set_pauseparam(struct net_device *dev,
                               struct ethtool_pauseparam *ecmd)
 {
        struct skge_port *skge = netdev_priv(dev);
+       struct ethtool_pauseparam old;
 
-       skge->autoneg = ecmd->autoneg;
-       if (ecmd->rx_pause && ecmd->tx_pause)
-               skge->flow_control = FLOW_MODE_SYMMETRIC;
-       else if (ecmd->rx_pause && !ecmd->tx_pause)
-               skge->flow_control = FLOW_MODE_REM_SEND;
-       else if (!ecmd->rx_pause && ecmd->tx_pause)
-               skge->flow_control = FLOW_MODE_LOC_SEND;
-       else
-               skge->flow_control = FLOW_MODE_NONE;
+       skge_get_pauseparam(dev, &old);
+
+       if (ecmd->autoneg != old.autoneg)
+               skge->flow_control = ecmd->autoneg ? FLOW_MODE_NONE : FLOW_MODE_SYMMETRIC;
+       else {
+               if (ecmd->rx_pause && ecmd->tx_pause)
+                       skge->flow_control = FLOW_MODE_SYMMETRIC;
+               else if (ecmd->rx_pause && !ecmd->tx_pause)
+                       skge->flow_control = FLOW_MODE_SYM_OR_REM;
+               else if (!ecmd->rx_pause && ecmd->tx_pause)
+                       skge->flow_control = FLOW_MODE_LOC_SEND;
+               else
+                       skge->flow_control = FLOW_MODE_NONE;
+       }
 
        if (netif_running(dev))
                skge_phy_reset(skge);
+
        return 0;
 }
 
@@ -854,6 +860,23 @@ static int skge_rx_fill(struct net_device *dev)
        return 0;
 }
 
+static const char *skge_pause(enum pause_status status)
+{
+       switch(status) {
+       case FLOW_STAT_NONE:
+               return "none";
+       case FLOW_STAT_REM_SEND:
+               return "rx only";
+       case FLOW_STAT_LOC_SEND:
+               return "tx_only";
+       case FLOW_STAT_SYMMETRIC:               /* Both station may send PAUSE */
+               return "both";
+       default:
+               return "indeterminated";
+       }
+}
+
+
 static void skge_link_up(struct skge_port *skge)
 {
        skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG),
@@ -862,16 +885,13 @@ static void skge_link_up(struct skge_port *skge)
        netif_carrier_on(skge->netdev);
        netif_wake_queue(skge->netdev);
 
-       if (netif_msg_link(skge))
+       if (netif_msg_link(skge)) {
                printk(KERN_INFO PFX
                       "%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
                       skge->netdev->name, skge->speed,
                       skge->duplex == DUPLEX_FULL ? "full" : "half",
-                      (skge->flow_control == FLOW_MODE_NONE) ? "none" :
-                      (skge->flow_control == FLOW_MODE_LOC_SEND) ? "tx only" :
-                      (skge->flow_control == FLOW_MODE_REM_SEND) ? "rx only" :
-                      (skge->flow_control == FLOW_MODE_SYMMETRIC) ? "tx and rx" :
-                      "unknown");
+                      skge_pause(skge->flow_status));
+       }
 }
 
 static void skge_link_down(struct skge_port *skge)
@@ -1015,7 +1035,7 @@ static const u16 phy_pause_map[] = {
        [FLOW_MODE_NONE] =      0,
        [FLOW_MODE_LOC_SEND] =  PHY_AN_PAUSE_ASYM,
        [FLOW_MODE_SYMMETRIC] = PHY_AN_PAUSE_CAP,
-       [FLOW_MODE_REM_SEND]  = PHY_AN_PAUSE_CAP | PHY_AN_PAUSE_ASYM,
+       [FLOW_MODE_SYM_OR_REM]  = PHY_AN_PAUSE_CAP | PHY_AN_PAUSE_ASYM,
 };
 
 /* special defines for FIBER (88E1011S only) */
@@ -1023,7 +1043,7 @@ static const u16 fiber_pause_map[] = {
        [FLOW_MODE_NONE]        = PHY_X_P_NO_PAUSE,
        [FLOW_MODE_LOC_SEND]    = PHY_X_P_ASYM_MD,
        [FLOW_MODE_SYMMETRIC]   = PHY_X_P_SYM_MD,
-       [FLOW_MODE_REM_SEND]    = PHY_X_P_BOTH_MD,
+       [FLOW_MODE_SYM_OR_REM]  = PHY_X_P_BOTH_MD,
 };
 
 
@@ -1072,20 +1092,19 @@ static void bcom_check_link(struct skge_hw *hw, int port)
                        return;
                }
 
-
                /* We are using IEEE 802.3z/D5.0 Table 37-4 */
                switch (aux & PHY_B_AS_PAUSE_MSK) {
                case PHY_B_AS_PAUSE_MSK:
-                       skge->flow_control = FLOW_MODE_SYMMETRIC;
+                       skge->flow_status = FLOW_STAT_SYMMETRIC;
                        break;
                case PHY_B_AS_PRR:
-                       skge->flow_control = FLOW_MODE_REM_SEND;
+                       skge->flow_status = FLOW_STAT_REM_SEND;
                        break;
                case PHY_B_AS_PRT:
-                       skge->flow_control = FLOW_MODE_LOC_SEND;
+                       skge->flow_status = FLOW_STAT_LOC_SEND;
                        break;
                default:
-                       skge->flow_control = FLOW_MODE_NONE;
+                       skge->flow_status = FLOW_STAT_NONE;
                }
                skge->speed = SPEED_1000;
        }
@@ -1283,15 +1302,20 @@ static void xm_check_link(struct net_device *dev)
                }
 
                /* We are using IEEE 802.3z/D5.0 Table 37-4 */
-               if (lpa & PHY_X_P_SYM_MD)
-                       skge->flow_control = FLOW_MODE_SYMMETRIC;
-               else if ((lpa & PHY_X_RS_PAUSE) == PHY_X_P_ASYM_MD)
-                       skge->flow_control = FLOW_MODE_REM_SEND;
-               else if ((lpa & PHY_X_RS_PAUSE) == PHY_X_P_BOTH_MD)
-                       skge->flow_control = FLOW_MODE_LOC_SEND;
+               if ((skge->flow_control == FLOW_MODE_SYMMETRIC ||
+                    skge->flow_control == FLOW_MODE_SYM_OR_REM) &&
+                   (lpa & PHY_X_P_SYM_MD))
+                       skge->flow_status = FLOW_STAT_SYMMETRIC;
+               else if (skge->flow_control == FLOW_MODE_SYM_OR_REM &&
+                        (lpa & PHY_X_RS_PAUSE) == PHY_X_P_ASYM_MD)
+                       /* Enable PAUSE receive, disable PAUSE transmit */
+                       skge->flow_status  = FLOW_STAT_REM_SEND;
+               else if (skge->flow_control == FLOW_MODE_LOC_SEND &&
+                        (lpa & PHY_X_RS_PAUSE) == PHY_X_P_BOTH_MD)
+                       /* Disable PAUSE receive, enable PAUSE transmit */
+                       skge->flow_status = FLOW_STAT_LOC_SEND;
                else
-                       skge->flow_control = FLOW_MODE_NONE;
-
+                       skge->flow_status = FLOW_STAT_NONE;
 
                skge->speed = SPEED_1000;
        }
@@ -1602,8 +1626,8 @@ static void genesis_link_up(struct skge_port *skge)
         * enabling pause frame reception is required for 1000BT
         * because the XMAC is not reset if the link is going down
         */
-       if (skge->flow_control == FLOW_MODE_NONE ||
-           skge->flow_control == FLOW_MODE_LOC_SEND)
+       if (skge->flow_status == FLOW_STAT_NONE ||
+           skge->flow_status == FLOW_STAT_LOC_SEND)
                /* Disable Pause Frame Reception */
                cmd |= XM_MMU_IGN_PF;
        else
@@ -1613,8 +1637,8 @@ static void genesis_link_up(struct skge_port *skge)
        xm_write16(hw, port, XM_MMU_CMD, cmd);
 
        mode = xm_read32(hw, port, XM_MODE);
-       if (skge->flow_control == FLOW_MODE_SYMMETRIC ||
-           skge->flow_control == FLOW_MODE_LOC_SEND) {
+       if (skge->flow_status== FLOW_STAT_SYMMETRIC ||
+           skge->flow_status == FLOW_STAT_LOC_SEND) {
                /*
                 * Configure Pause Frame Generation
                 * Use internal and external Pause Frame Generation.
@@ -1938,6 +1962,11 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
        case FLOW_MODE_LOC_SEND:
                /* disable Rx flow-control */
                reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
+               break;
+       case FLOW_MODE_SYMMETRIC:
+       case FLOW_MODE_SYM_OR_REM:
+               /* enable Tx & Rx flow-control */
+               break;
        }
 
        gma_write16(hw, port, GM_GP_CTRL, reg);
@@ -2132,13 +2161,11 @@ static void yukon_link_down(struct skge_port *skge)
        ctrl &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
        gma_write16(hw, port, GM_GP_CTRL, ctrl);
 
-       if (skge->flow_control == FLOW_MODE_REM_SEND) {
+       if (skge->flow_status == FLOW_STAT_REM_SEND) {
+               ctrl = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
+               ctrl |= PHY_M_AN_ASP;
                /* restore Asymmetric Pause bit */
-               gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
-                                 gm_phy_read(hw, port,
-                                                  PHY_MARV_AUNE_ADV)
-                                 | PHY_M_AN_ASP);
-
+               gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, ctrl);
        }
 
        yukon_reset(hw, port);
@@ -2185,19 +2212,19 @@ static void yukon_phy_intr(struct skge_port *skge)
                /* We are using IEEE 802.3z/D5.0 Table 37-4 */
                switch (phystat & PHY_M_PS_PAUSE_MSK) {
                case PHY_M_PS_PAUSE_MSK:
-                       skge->flow_control = FLOW_MODE_SYMMETRIC;
+                       skge->flow_status = FLOW_STAT_SYMMETRIC;
                        break;
                case PHY_M_PS_RX_P_EN:
-                       skge->flow_control = FLOW_MODE_REM_SEND;
+                       skge->flow_status = FLOW_STAT_REM_SEND;
                        break;
                case PHY_M_PS_TX_P_EN:
-                       skge->flow_control = FLOW_MODE_LOC_SEND;
+                       skge->flow_status = FLOW_STAT_LOC_SEND;
                        break;
                default:
-                       skge->flow_control = FLOW_MODE_NONE;
+                       skge->flow_status = FLOW_STAT_NONE;
                }
 
-               if (skge->flow_control == FLOW_MODE_NONE ||
+               if (skge->flow_status == FLOW_STAT_NONE ||
                    (skge->speed < SPEED_1000 && skge->duplex == DUPLEX_HALF))
                        skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
                else
@@ -3420,7 +3447,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
 
        /* Auto speed and flow control */
        skge->autoneg = AUTONEG_ENABLE;
-       skge->flow_control = FLOW_MODE_SYMMETRIC;
+       skge->flow_control = FLOW_MODE_SYM_OR_REM;
        skge->duplex = -1;
        skge->speed = -1;
        skge->advertising = skge_supported_modes(hw);

diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index 9cc955c1250306bf6edb2538094584a58e76a264..537c0aaa1db8de7b327572657fea85003548afda 100644 (file)
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -2427,13 +2427,24 @@ struct skge_hw {
        struct mutex         phy_mutex;
 };
 
-enum {
-       FLOW_MODE_NONE          = 0, /* No Flow-Control */
-       FLOW_MODE_LOC_SEND      = 1, /* Local station sends PAUSE */
-       FLOW_MODE_REM_SEND      = 2, /* Symmetric or just remote */
+enum pause_control {
+       FLOW_MODE_NONE          = 1, /* No Flow-Control */
+       FLOW_MODE_LOC_SEND      = 2, /* Local station sends PAUSE */
        FLOW_MODE_SYMMETRIC     = 3, /* Both stations may send PAUSE */
+       FLOW_MODE_SYM_OR_REM    = 4, /* Both stations may send PAUSE or
+                                     * just the remote station may send PAUSE
+                                     */
+};
+
+enum pause_status {
+       FLOW_STAT_INDETERMINATED=0,     /* indeterminated */
+       FLOW_STAT_NONE,                 /* No Flow Control */
+       FLOW_STAT_REM_SEND,             /* Remote Station sends PAUSE */
+       FLOW_STAT_LOC_SEND,             /* Local station sends PAUSE */
+       FLOW_STAT_SYMMETRIC,            /* Both station may send PAUSE */
 };
 
+
 struct skge_port {
        u32                  msg_enable;
        struct skge_hw       *hw;
@@ -2446,9 +2457,10 @@ struct skge_port {
        struct net_device_stats net_stats;
 
        struct work_struct   link_thread;
+       enum pause_control   flow_control;
+       enum pause_status    flow_status;
        u8                   rx_csum;
        u8                   blink_on;
-       u8                   flow_control;
        u8                   wol;
        u8                   autoneg;   /* AUTONEG_ENABLE, AUTONEG_DISABLE */
        u8                   duplex;    /* DUPLEX_HALF, DUPLEX_FULL */