[netdrvr] natsemi: Separate out media initialization code

This makes it easier to merge an upcoming patch, and overall makes the
code a bit more clean.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 2e4ecedba0572cc655b3827a39c88d0ddebb139b..5dc41462fa01043c97175e176187d0027ce316d6 100644 (file)
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -813,6 +813,42 @@ static void move_int_phy(struct net_device *dev, int addr)
        udelay(1);
 }
 
+static void __devinit natsemi_init_media (struct net_device *dev)
+{
+       struct netdev_private *np = netdev_priv(dev);
+       u32 tmp;
+
+       netif_carrier_off(dev);
+
+       /* get the initial settings from hardware */
+       tmp            = mdio_read(dev, MII_BMCR);
+       np->speed      = (tmp & BMCR_SPEED100)? SPEED_100     : SPEED_10;
+       np->duplex     = (tmp & BMCR_FULLDPLX)? DUPLEX_FULL   : DUPLEX_HALF;
+       np->autoneg    = (tmp & BMCR_ANENABLE)? AUTONEG_ENABLE: AUTONEG_DISABLE;
+       np->advertising= mdio_read(dev, MII_ADVERTISE);
+
+       if ((np->advertising & ADVERTISE_ALL) != ADVERTISE_ALL
+        && netif_msg_probe(np)) {
+               printk(KERN_INFO "natsemi %s: Transceiver default autonegotiation %s "
+                       "10%s %s duplex.\n",
+                       pci_name(np->pci_dev),
+                       (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE)?
+                         "enabled, advertise" : "disabled, force",
+                       (np->advertising &
+                         (ADVERTISE_100FULL|ADVERTISE_100HALF))?
+                           "0" : "",
+                       (np->advertising &
+                         (ADVERTISE_100FULL|ADVERTISE_10FULL))?
+                           "full" : "half");
+       }
+       if (netif_msg_probe(np))
+               printk(KERN_INFO
+                       "natsemi %s: Transceiver status %#04x advertising %#04x.\n",
+                       pci_name(np->pci_dev), mdio_read(dev, MII_BMSR),
+                       np->advertising);
+
+}
+
 static int __devinit natsemi_probe1 (struct pci_dev *pdev,
        const struct pci_device_id *ent)
 {
@@ -957,34 +993,7 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev,
        if (mtu)
                dev->mtu = mtu;
 
-       netif_carrier_off(dev);
-
-       /* get the initial settings from hardware */
-       tmp            = mdio_read(dev, MII_BMCR);
-       np->speed      = (tmp & BMCR_SPEED100)? SPEED_100     : SPEED_10;
-       np->duplex     = (tmp & BMCR_FULLDPLX)? DUPLEX_FULL   : DUPLEX_HALF;
-       np->autoneg    = (tmp & BMCR_ANENABLE)? AUTONEG_ENABLE: AUTONEG_DISABLE;
-       np->advertising= mdio_read(dev, MII_ADVERTISE);
-
-       if ((np->advertising & ADVERTISE_ALL) != ADVERTISE_ALL
-        && netif_msg_probe(np)) {
-               printk(KERN_INFO "natsemi %s: Transceiver default autonegotiation %s "
-                       "10%s %s duplex.\n",
-                       pci_name(np->pci_dev),
-                       (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE)?
-                         "enabled, advertise" : "disabled, force",
-                       (np->advertising &
-                         (ADVERTISE_100FULL|ADVERTISE_100HALF))?
-                           "0" : "",
-                       (np->advertising &
-                         (ADVERTISE_100FULL|ADVERTISE_10FULL))?
-                           "full" : "half");
-       }
-       if (netif_msg_probe(np))
-               printk(KERN_INFO
-                       "natsemi %s: Transceiver status %#04x advertising %#04x.\n",
-                       pci_name(np->pci_dev), mdio_read(dev, MII_BMSR),
-                       np->advertising);
+       natsemi_init_media(dev);
 
        /* save the silicon revision for later querying */
        np->srr = readl(ioaddr + SiliconRev);