* History:
* 2003 - Created version 1.0 for Linux 2.4.x.
* 2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE
- * features. Released version 1.1
+ * features. Released version 1.1
*
* Theory of operation:
*
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
#include <asm/system.h>
/* enable support for minutes as units? */
#define UNIT_MINUTE 1
#define MODNAME "smsc37b787_wdt: "
-#define VERSION "1.1"
+#define VERSION "1.1"
-#define IOPORT 0x3F0
+#define IOPORT 0x3F0
#define IOPORT_SIZE 2
-#define IODEV_NO 8
+#define IODEV_NO 8
-static int unit = UNIT_SECOND; /* timer's unit */
-static int timeout = 60; /* timeout value: default is 60 "units" */
-static unsigned long timer_enabled = 0; /* is the timer enabled? */
+static int unit = UNIT_SECOND; /* timer's unit */
+static int timeout = 60; /* timeout value: default is 60 "units" */
+static unsigned long timer_enabled; /* is the timer enabled? */
static char expect_close; /* is the close expected? */
static inline void open_io_config(void)
{
- outb(0x55, IOPORT);
+ outb(0x55, IOPORT);
mdelay(1);
- outb(0x55, IOPORT);
+ outb(0x55, IOPORT);
}
/* lock the IO chip */
static inline void close_io_config(void)
{
- outb(0xAA, IOPORT);
+ outb(0xAA, IOPORT);
}
/* select the IO device */
static inline void select_io_device(unsigned char devno)
{
- outb(0x07, IOPORT);
- outb(devno, IOPORT+1);
+ outb(0x07, IOPORT);
+ outb(devno, IOPORT+1);
}
/* write to the control register */
static inline void write_io_cr(unsigned char reg, unsigned char data)
{
- outb(reg, IOPORT);
- outb(data, IOPORT+1);
+ outb(reg, IOPORT);
+ outb(data, IOPORT+1);
}
/* read from the control register */
static inline char read_io_cr(unsigned char reg)
{
- outb(reg, IOPORT);
- return inb(IOPORT+1);
+ outb(reg, IOPORT);
+ return inb(IOPORT+1);
}
/* -- Medium level functions ------------------------------------*/
static inline void gpio_bit12(unsigned char reg)
{
- // -- General Purpose I/O Bit 1.2 --
- // Bit 0, In/Out: 0 = Output, 1 = Input
- // Bit 1, Polarity: 0 = No Invert, 1 = Invert
- // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable
- // Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17,
- // 11 = Either Edge Triggered Intr. 2
- // Bit 5/6 (Reserved)
- // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain
- write_io_cr(0xE2, reg);
+ /* -- General Purpose I/O Bit 1.2 --
+ * Bit 0, In/Out: 0 = Output, 1 = Input
+ * Bit 1, Polarity: 0 = No Invert, 1 = Invert
+ * Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable
+ * Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17,
+ * 11 = Either Edge Triggered Intr. 2
+ * Bit 5/6 (Reserved)
+ * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain
+ */
+ write_io_cr(0xE2, reg);
}
static inline void gpio_bit13(unsigned char reg)
{
- // -- General Purpose I/O Bit 1.3 --
- // Bit 0, In/Out: 0 = Output, 1 = Input
- // Bit 1, Polarity: 0 = No Invert, 1 = Invert
- // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable
- // Bit 3, Function select: 0 = GPI/O, 1 = LED
- // Bit 4-6 (Reserved)
- // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain
- write_io_cr(0xE3, reg);
+ /* -- General Purpose I/O Bit 1.3 --
+ * Bit 0, In/Out: 0 = Output, 1 = Input
+ * Bit 1, Polarity: 0 = No Invert, 1 = Invert
+ * Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable
+ * Bit 3, Function select: 0 = GPI/O, 1 = LED
+ * Bit 4-6 (Reserved)
+ * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain
+ */
+ write_io_cr(0xE3, reg);
}
static inline void wdt_timer_units(unsigned char new_units)
{
- // -- Watchdog timer units --
- // Bit 0-6 (Reserved)
- // Bit 7, WDT Time-out Value Units Select
- // (0 = Minutes, 1 = Seconds)
- write_io_cr(0xF1, new_units);
+ /* -- Watchdog timer units --
+ * Bit 0-6 (Reserved)
+ * Bit 7, WDT Time-out Value Units Select
+ * (0 = Minutes, 1 = Seconds)
+ */
+ write_io_cr(0xF1, new_units);
}
static inline void wdt_timeout_value(unsigned char new_timeout)
{
- // -- Watchdog Timer Time-out Value --
- // Bit 0-7 Binary coded units (0=Disabled, 1..255)
- write_io_cr(0xF2, new_timeout);
+ /* -- Watchdog Timer Time-out Value --
+ * Bit 0-7 Binary coded units (0=Disabled, 1..255)
+ */
+ write_io_cr(0xF2, new_timeout);
}
static inline void wdt_timer_conf(unsigned char conf)
{
- // -- Watchdog timer configuration --
- // Bit 0 Joystick enable: 0* = No Reset, 1 = Reset WDT upon Gameport I/O
- // Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr.
- // Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr.
- // Bit 3 Reset the timer
- // (Wrong in SMsC documentation? Given as: PowerLED Timout Enabled)
- // Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled,
- // 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15)
- write_io_cr(0xF3, conf);
+ /* -- Watchdog timer configuration --
+ * Bit 0 Joystick enable: 0* = No Reset, 1 = Reset WDT upon
+ * Gameport I/O
+ * Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr.
+ * Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr
+ * Bit 3 Reset the timer
+ * (Wrong in SMsC documentation? Given as: PowerLED Timout
+ * Enabled)
+ * Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled,
+ * 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15)
+ */
+ write_io_cr(0xF3, conf);
}
static inline void wdt_timer_ctrl(unsigned char reg)
{
- // -- Watchdog timer control --
- // Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured
- // Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz
- // Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning)
- // Bit 3 P20 Force Timeout enabled:
- // 0 = P20 activity does not generate the WD timeout event
- // 1 = P20 Allows rising edge of P20, from the keyboard
- // controller, to force the WD timeout event.
- // Bit 4 (Reserved)
- // -- Soft power management --
- // Bit 5 Stop Counter: 1 = Stop software power down counter
- // set via register 0xB8, (self-cleaning)
- // (Upon read: 0 = Counter running, 1 = Counter stopped)
- // Bit 6 Restart Counter: 1 = Restart software power down counter
- // set via register 0xB8, (self-cleaning)
- // Bit 7 SPOFF: 1 = Force software power down (self-cleaning)
-
- write_io_cr(0xF4, reg);
+ /* -- Watchdog timer control --
+ * Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured
+ * Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz
+ * Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning)
+ * Bit 3 P20 Force Timeout enabled:
+ * 0 = P20 activity does not generate the WD timeout event
+ * 1 = P20 Allows rising edge of P20, from the keyboard
+ * controller, to force the WD timeout event.
+ * Bit 4 (Reserved)
+ * -- Soft power management --
+ * Bit 5 Stop Counter: 1 = Stop software power down counter
+ * set via register 0xB8, (self-cleaning)
+ * (Upon read: 0 = Counter running, 1 = Counter stopped)
+ * Bit 6 Restart Counter: 1 = Restart software power down counter
+ * set via register 0xB8, (self-cleaning)
+ * Bit 7 SPOFF: 1 = Force software power down (self-cleaning)
+ */
+ write_io_cr(0xF4, reg);
}
/* -- Higher level functions ------------------------------------*/
static void wb_smsc_wdt_initialize(void)
{
- unsigned char old;
+ unsigned char old;
spin_lock(&io_lock);
- open_io_config();
- select_io_device(IODEV_NO);
+ open_io_config();
+ select_io_device(IODEV_NO);
- // enable the watchdog
- gpio_bit13(0x08); // Select pin 80 = LED not GPIO
- gpio_bit12(0x0A); // Set pin 79 = WDT not GPIO/Output/Polarity=Invert
+ /* enable the watchdog */
+ gpio_bit13(0x08); /* Select pin 80 = LED not GPIO */
+ gpio_bit12(0x0A); /* Set pin 79 = WDT not
+ GPIO/Output/Polarity=Invert */
+ /* disable the timeout */
+ wdt_timeout_value(0);
- // disable the timeout
- wdt_timeout_value(0);
+ /* reset control register */
+ wdt_timer_ctrl(0x00);
- // reset control register
- wdt_timer_ctrl(0x00);
-
- // reset configuration register
+ /* reset configuration register */
wdt_timer_conf(0x00);
- // read old (timer units) register
- old = read_io_cr(0xF1) & 0x7F;
- if (unit == UNIT_SECOND) old |= 0x80; // set to seconds
+ /* read old (timer units) register */
+ old = read_io_cr(0xF1) & 0x7F;
+ if (unit == UNIT_SECOND)
+ old |= 0x80; /* set to seconds */
- // set the watchdog timer units
- wdt_timer_units(old);
+ /* set the watchdog timer units */
+ wdt_timer_units(old);
- close_io_config();
+ close_io_config();
spin_unlock(&io_lock);
}
static void wb_smsc_wdt_shutdown(void)
{
spin_lock(&io_lock);
- open_io_config();
- select_io_device(IODEV_NO);
+ open_io_config();
+ select_io_device(IODEV_NO);
- // disable the watchdog
- gpio_bit13(0x09);
- gpio_bit12(0x09);
+ /* disable the watchdog */
+ gpio_bit13(0x09);
+ gpio_bit12(0x09);
- // reset watchdog config register
+ /* reset watchdog config register */
wdt_timer_conf(0x00);
- // reset watchdog control register
- wdt_timer_ctrl(0x00);
+ /* reset watchdog control register */
+ wdt_timer_ctrl(0x00);
- // disable timeout
- wdt_timeout_value(0x00);
+ /* disable timeout */
+ wdt_timeout_value(0x00);
- close_io_config();
+ close_io_config();
spin_unlock(&io_lock);
}
static void wb_smsc_wdt_set_timeout(unsigned char new_timeout)
{
spin_lock(&io_lock);
- open_io_config();
- select_io_device(IODEV_NO);
+ open_io_config();
+ select_io_device(IODEV_NO);
- // set Power LED to blink, if we enable the timeout
- wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02);
+ /* set Power LED to blink, if we enable the timeout */
+ wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02);
- // set timeout value
- wdt_timeout_value(new_timeout);
+ /* set timeout value */
+ wdt_timeout_value(new_timeout);
- close_io_config();
+ close_io_config();
spin_unlock(&io_lock);
}
static unsigned char wb_smsc_wdt_get_timeout(void)
{
- unsigned char set_timeout;
+ unsigned char set_timeout;
spin_lock(&io_lock);
- open_io_config();
- select_io_device(IODEV_NO);
- set_timeout = read_io_cr(0xF2);
- close_io_config();
+ open_io_config();
+ select_io_device(IODEV_NO);
+ set_timeout = read_io_cr(0xF2);
+ close_io_config();
spin_unlock(&io_lock);
- return set_timeout;
+ return set_timeout;
}
/* disable watchdog */
static void wb_smsc_wdt_disable(void)
{
- // set the timeout to 0 to disable the watchdog
- wb_smsc_wdt_set_timeout(0);
+ /* set the timeout to 0 to disable the watchdog */
+ wb_smsc_wdt_set_timeout(0);
}
/* enable watchdog by setting the current timeout */
static void wb_smsc_wdt_enable(void)
{
- // set the current timeout...
- wb_smsc_wdt_set_timeout(timeout);
+ /* set the current timeout... */
+ wb_smsc_wdt_set_timeout(timeout);
}
/* reset the timer */
static void wb_smsc_wdt_reset_timer(void)
{
spin_lock(&io_lock);
- open_io_config();
- select_io_device(IODEV_NO);
+ open_io_config();
+ select_io_device(IODEV_NO);
- // reset the timer
+ /* reset the timer */
wdt_timeout_value(timeout);
wdt_timer_conf(0x08);
- close_io_config();
+ close_io_config();
spin_unlock(&io_lock);
}
/* Reload and activate timer */
wb_smsc_wdt_enable();
- printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
+ printk(KERN_INFO MODNAME
+ "Watchdog enabled. Timeout set to %d %s.\n",
+ timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
return nonseekable_open(inode, file);
}
/* Shut off the timer. */
if (expect_close == 42) {
- wb_smsc_wdt_disable();
- printk(KERN_INFO MODNAME "Watchdog disabled, sleeping again...\n");
+ wb_smsc_wdt_disable();
+ printk(KERN_INFO MODNAME
+ "Watchdog disabled, sleeping again...\n");
} else {
- printk(KERN_CRIT MODNAME "Unexpected close, not stopping watchdog!\n");
+ printk(KERN_CRIT MODNAME
+ "Unexpected close, not stopping watchdog!\n");
wb_smsc_wdt_reset_timer();
}
/* reset expect flag */
expect_close = 0;
- /* scan to see whether or not we got the magic character */
+ /* scan to see whether or not we got the
+ magic character */
for (i = 0; i != len; i++) {
char c;
if (get_user(c, data+i))
/* ioctl => control interface */
-static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long wb_smsc_wdt_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
{
int new_timeout;
int __user *i;
} uarg;
- static struct watchdog_info ident = {
+ static const struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING |
- WDIOF_SETTIMEOUT |
+ WDIOF_SETTIMEOUT |
WDIOF_MAGICCLOSE,
.firmware_version = 0,
.identity = "SMsC 37B787 Watchdog"
uarg.i = (int __user *)arg;
switch (cmd) {
- default:
- return -ENOTTY;
-
- case WDIOC_GETSUPPORT:
- return copy_to_user(uarg.ident, &ident,
- sizeof(ident)) ? -EFAULT : 0;
-
- case WDIOC_GETSTATUS:
- return put_user(wb_smsc_wdt_status(), uarg.i);
-
- case WDIOC_GETBOOTSTATUS:
- return put_user(0, uarg.i);
-
- case WDIOC_KEEPALIVE:
- wb_smsc_wdt_reset_timer();
- return 0;
-
- case WDIOC_SETTIMEOUT:
- if (get_user(new_timeout, uarg.i))
- return -EFAULT;
-
- // the API states this is given in secs
- if (unit == UNIT_MINUTE)
- new_timeout /= 60;
-
- if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
- return -EINVAL;
-
- timeout = new_timeout;
- wb_smsc_wdt_set_timeout(timeout);
-
- // fall through and return the new timeout...
-
- case WDIOC_GETTIMEOUT:
-
- new_timeout = timeout;
-
- if (unit == UNIT_MINUTE)
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(uarg.ident, &ident, sizeof(ident))
+ ? -EFAULT : 0;
+ case WDIOC_GETSTATUS:
+ return put_user(wb_smsc_wdt_status(), uarg.i);
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, uarg.i);
+ case WDIOC_KEEPALIVE:
+ wb_smsc_wdt_reset_timer();
+ return 0;
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_timeout, uarg.i))
+ return -EFAULT;
+ /* the API states this is given in secs */
+ if (unit == UNIT_MINUTE)
+ new_timeout /= 60;
+ if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
+ return -EINVAL;
+ timeout = new_timeout;
+ wb_smsc_wdt_set_timeout(timeout);
+ /* fall through and return the new timeout... */
+ case WDIOC_GETTIMEOUT:
+ new_timeout = timeout;
+ if (unit == UNIT_MINUTE)
new_timeout *= 60;
+ return put_user(new_timeout, uarg.i);
+ case WDIOC_SETOPTIONS:
+ {
+ int options, retval = -EINVAL;
- return put_user(new_timeout, uarg.i);
-
- case WDIOC_SETOPTIONS:
- {
- int options, retval = -EINVAL;
-
- if (get_user(options, uarg.i))
- return -EFAULT;
-
- if (options & WDIOS_DISABLECARD) {
- wb_smsc_wdt_disable();
- retval = 0;
- }
-
- if (options & WDIOS_ENABLECARD) {
- wb_smsc_wdt_enable();
- retval = 0;
- }
+ if (get_user(options, uarg.i))
+ return -EFAULT;
- return retval;
+ if (options & WDIOS_DISABLECARD) {
+ wb_smsc_wdt_disable();
+ retval = 0;
}
+ if (options & WDIOS_ENABLECARD) {
+ wb_smsc_wdt_enable();
+ retval = 0;
+ }
+ return retval;
+ }
+ default:
+ return -ENOTTY;
}
}
/* -- Notifier funtions -----------------------------------------*/
-static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+static int wb_smsc_wdt_notify_sys(struct notifier_block *this,
+ unsigned long code, void *unused)
{
- if (code == SYS_DOWN || code == SYS_HALT)
- {
- // set timeout to 0, to avoid possible race-condition
- timeout = 0;
+ if (code == SYS_DOWN || code == SYS_HALT) {
+ /* set timeout to 0, to avoid possible race-condition */
+ timeout = 0;
wb_smsc_wdt_disable();
}
return NOTIFY_DONE;
/* -- Module's structures ---------------------------------------*/
-static const struct file_operations wb_smsc_wdt_fops =
-{
- .owner = THIS_MODULE,
+static const struct file_operations wb_smsc_wdt_fops = {
+ .owner = THIS_MODULE,
.llseek = no_llseek,
.write = wb_smsc_wdt_write,
- .ioctl = wb_smsc_wdt_ioctl,
+ .unlocked_ioctl = wb_smsc_wdt_ioctl,
.open = wb_smsc_wdt_open,
.release = wb_smsc_wdt_release,
};
-static struct notifier_block wb_smsc_wdt_notifier =
-{
+static struct notifier_block wb_smsc_wdt_notifier = {
.notifier_call = wb_smsc_wdt_notify_sys,
};
-static struct miscdevice wb_smsc_wdt_miscdev =
-{
+static struct miscdevice wb_smsc_wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &wb_smsc_wdt_fops,
{
int ret;
- printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n");
+ printk(KERN_INFO "SMsC 37B787 watchdog component driver "
+ VERSION " initialising...\n");
if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) {
- printk(KERN_ERR MODNAME "Unable to register IO port %#x\n", IOPORT);
+ printk(KERN_ERR MODNAME "Unable to register IO port %#x\n",
+ IOPORT);
ret = -EBUSY;
goto out_pnp;
}
- // set new maximum, if it's too big
- if (timeout > MAX_TIMEOUT)
- timeout = MAX_TIMEOUT;
+ /* set new maximum, if it's too big */
+ if (timeout > MAX_TIMEOUT)
+ timeout = MAX_TIMEOUT;
- // init the watchdog timer
- wb_smsc_wdt_initialize();
+ /* init the watchdog timer */
+ wb_smsc_wdt_initialize();
ret = register_reboot_notifier(&wb_smsc_wdt_notifier);
if (ret) {
- printk(KERN_ERR MODNAME "Unable to register reboot notifier err = %d\n", ret);
+ printk(KERN_ERR MODNAME
+ "Unable to register reboot notifier err = %d\n", ret);
goto out_io;
}
ret = misc_register(&wb_smsc_wdt_miscdev);
if (ret) {
- printk(KERN_ERR MODNAME "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR);
+ printk(KERN_ERR MODNAME
+ "Unable to register miscdev on minor %d\n",
+ WATCHDOG_MINOR);
goto out_rbt;
}
- // output info
- printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
- printk(KERN_INFO MODNAME "Watchdog initialized and sleeping (nowayout=%d)...\n", nowayout);
-
- // ret = 0
-
+ /* output info */
+ printk(KERN_INFO MODNAME "Timeout set to %d %s.\n",
+ timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
+ printk(KERN_INFO MODNAME
+ "Watchdog initialized and sleeping (nowayout=%d)...\n",
+ nowayout);
out_clean:
return ret;
static void __exit wb_smsc_wdt_exit(void)
{
/* Stop the timer before we leave */
- if (!nowayout)
- {
+ if (!nowayout) {
wb_smsc_wdt_shutdown();
printk(KERN_INFO MODNAME "Watchdog disabled.\n");
}
unregister_reboot_notifier(&wb_smsc_wdt_notifier);
release_region(IOPORT, IOPORT_SIZE);
- printk("SMsC 37B787 watchdog component driver removed.\n");
+ printk(KERN_INFO "SMsC 37B787 watchdog component driver removed.\n");
}
module_init(wb_smsc_wdt_init);
module_exit(wb_smsc_wdt_exit);
MODULE_AUTHOR("Sven Anders <anders@anduras.de>");
-MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " VERSION ")");
+MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version "
+ VERSION ")");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
#ifdef SMSC_SUPPORT_MINUTES
module_param(unit, int, 0);
-MODULE_PARM_DESC(unit, "set unit to use, 0=seconds or 1=minutes, default is 0");
+MODULE_PARM_DESC(unit,
+ "set unit to use, 0=seconds or 1=minutes, default is 0");
#endif
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60");
module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
projects / linux-2.6 / commitdiff