} else if (func == MPI_FUNCTION_EVENT_ACK) {
dprintk((MYIOC_s_INFO_FMT "mpt_base_reply, EventAck reply received\n",
ioc->name));
- } else if (func == MPI_FUNCTION_CONFIG ||
- func == MPI_FUNCTION_TOOLBOX) {
+ } else if (func == MPI_FUNCTION_CONFIG) {
CONFIGPARMS *pCfg;
unsigned long flags;
return rc;
}
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mpt_toolbox - Generic function to issue toolbox message
- * @ioc - Pointer to an adapter structure
- * @cfg - Pointer to a toolbox structure. Struct contains
- * action, page address, direction, physical address
- * and pointer to a configuration page header
- * Page header is updated.
- *
- * Returns 0 for success
- * -EPERM if not allowed due to ISR context
- * -EAGAIN if no msg frames currently available
- * -EFAULT for non-successful reply or no reply (timeout)
- */
-int
-mpt_toolbox(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
-{
- ToolboxIstwiReadWriteRequest_t *pReq;
- MPT_FRAME_HDR *mf;
- struct pci_dev *pdev;
- unsigned long flags;
- int rc;
- u32 flagsLength;
- int in_isr;
-
- /* Prevent calling wait_event() (below), if caller happens
- * to be in ISR context, because that is fatal!
- */
- in_isr = in_interrupt();
- if (in_isr) {
- dcprintk((MYIOC_s_WARN_FMT "toobox request not allowed in ISR context!\n",
- ioc->name));
- return -EPERM;
- }
-
- /* Get and Populate a free Frame
- */
- if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
- dcprintk((MYIOC_s_WARN_FMT "mpt_toolbox: no msg frames!\n",
- ioc->name));
- return -EAGAIN;
- }
- pReq = (ToolboxIstwiReadWriteRequest_t *)mf;
- pReq->Tool = pCfg->action;
- pReq->Reserved = 0;
- pReq->ChainOffset = 0;
- pReq->Function = MPI_FUNCTION_TOOLBOX;
- pReq->Reserved1 = 0;
- pReq->Reserved2 = 0;
- pReq->MsgFlags = 0;
- pReq->Flags = pCfg->dir;
- pReq->BusNum = 0;
- pReq->Reserved3 = 0;
- pReq->NumAddressBytes = 0x01;
- pReq->Reserved4 = 0;
- pReq->DataLength = cpu_to_le16(0x04);
- pdev = ioc->pcidev;
- if (pdev->devfn & 1)
- pReq->DeviceAddr = 0xB2;
- else
- pReq->DeviceAddr = 0xB0;
- pReq->Addr1 = 0;
- pReq->Addr2 = 0;
- pReq->Addr3 = 0;
- pReq->Reserved5 = 0;
-
- /* Add a SGE to the config request.
- */
-
- flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | 4;
-
- mpt_add_sge((char *)&pReq->SGL, flagsLength, pCfg->physAddr);
-
- dcprintk((MYIOC_s_INFO_FMT "Sending Toolbox request, Tool=%x\n",
- ioc->name, pReq->Tool));
-
- /* Append pCfg pointer to end of mf
- */
- *((void **) (((u8 *) mf) + (ioc->req_sz - sizeof(void *)))) = (void *) pCfg;
-
- /* Initalize the timer
- */
- init_timer(&pCfg->timer);
- pCfg->timer.data = (unsigned long) ioc;
- pCfg->timer.function = mpt_timer_expired;
- pCfg->wait_done = 0;
-
- /* Set the timer; ensure 10 second minimum */
- if (pCfg->timeout < 10)
- pCfg->timer.expires = jiffies + HZ*10;
- else
- pCfg->timer.expires = jiffies + HZ*pCfg->timeout;
-
- /* Add to end of Q, set timer and then issue this command */
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- list_add_tail(&pCfg->linkage, &ioc->configQ);
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
- add_timer(&pCfg->timer);
- mpt_put_msg_frame(mpt_base_index, ioc, mf);
- wait_event(mpt_waitq, pCfg->wait_done);
-
- /* mf has been freed - do not access */
-
- rc = pCfg->status;
-
- return rc;
-}
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_timer_expired - Call back for timer process.
EXPORT_SYMBOL(mpt_stm_index);
EXPORT_SYMBOL(mpt_HardResetHandler);
EXPORT_SYMBOL(mpt_config);
-EXPORT_SYMBOL(mpt_toolbox);
EXPORT_SYMBOL(mpt_findImVolumes);
EXPORT_SYMBOL(mpt_read_ioc_pg_3);
EXPORT_SYMBOL(mpt_alloc_fw_memory);
hp_host_info_t __user *uarg = (void __user *) arg;
MPT_ADAPTER *ioc;
struct pci_dev *pdev;
- char *pbuf;
+ char *pbuf=NULL;
dma_addr_t buf_dma;
hp_host_info_t karg;
CONFIGPARMS cfg;
ConfigPageHeader_t hdr;
int iocnum;
int rc, cim_rev;
+ ToolboxIstwiReadWriteRequest_t *IstwiRWRequest;
+ MPT_FRAME_HDR *mf = NULL;
+ MPIHeader_t *mpi_hdr;
dctlprintk((": mptctl_hp_hostinfo called.\n"));
/* Reset long to int. Should affect IA64 and SPARC only
}
}
- cfg.pageAddr = 0;
- cfg.action = MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL;
- cfg.dir = MPI_TB_ISTWI_FLAGS_READ;
- cfg.timeout = 10;
+ /*
+ * Gather ISTWI(Industry Standard Two Wire Interface) Data
+ */
+ if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) {
+ dfailprintk((MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
+ ioc->name,__FUNCTION__));
+ goto out;
+ }
+
+ IstwiRWRequest = (ToolboxIstwiReadWriteRequest_t *)mf;
+ mpi_hdr = (MPIHeader_t *) mf;
+ memset(IstwiRWRequest,0,sizeof(ToolboxIstwiReadWriteRequest_t));
+ IstwiRWRequest->Function = MPI_FUNCTION_TOOLBOX;
+ IstwiRWRequest->Tool = MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL;
+ IstwiRWRequest->MsgContext = mpi_hdr->MsgContext;
+ IstwiRWRequest->Flags = MPI_TB_ISTWI_FLAGS_READ;
+ IstwiRWRequest->NumAddressBytes = 0x01;
+ IstwiRWRequest->DataLength = cpu_to_le16(0x04);
+ if (pdev->devfn & 1)
+ IstwiRWRequest->DeviceAddr = 0xB2;
+ else
+ IstwiRWRequest->DeviceAddr = 0xB0;
+
pbuf = pci_alloc_consistent(ioc->pcidev, 4, &buf_dma);
- if (pbuf) {
- cfg.physAddr = buf_dma;
- if ((mpt_toolbox(ioc, &cfg)) == 0) {
- karg.rsvd = *(u32 *)pbuf;
- }
- pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma);
- pbuf = NULL;
+ if (!pbuf)
+ goto out;
+ mpt_add_sge((char *)&IstwiRWRequest->SGL,
+ (MPT_SGE_FLAGS_SSIMPLE_READ|4), buf_dma);
+
+ ioc->ioctl->wait_done = 0;
+ mpt_put_msg_frame(mptctl_id, ioc, mf);
+
+ rc = wait_event_timeout(mptctl_wait,
+ ioc->ioctl->wait_done == 1,
+ HZ*MPT_IOCTL_DEFAULT_TIMEOUT /* 10 sec */);
+
+ if(rc <=0 && (ioc->ioctl->wait_done != 1 )) {
+ /*
+ * Now we need to reset the board
+ */
+ mpt_free_msg_frame(ioc, mf);
+ mptctl_timeout_expired(ioc->ioctl);
+ goto out;
}
+ /*
+ *ISTWI Data Definition
+ * pbuf[0] = FW_VERSION = 0x4
+ * pbuf[1] = Bay Count = 6 or 4 or 2, depending on
+ * the config, you should be seeing one out of these three values
+ * pbuf[2] = Drive Installed Map = bit pattern depend on which
+ * bays have drives in them
+ * pbuf[3] = Checksum (0x100 = (byte0 + byte2 + byte3)
+ */
+ if (ioc->ioctl->status & MPT_IOCTL_STATUS_RF_VALID)
+ karg.rsvd = *(u32 *)pbuf;
+
+ out:
+ if (pbuf)
+ pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma);
+
/* Copy the data from kernel memory to user memory
*/
if (copy_to_user((char __user *)arg, &karg, sizeof(hp_host_info_t))) {
projects / linux-2.6 / commitdiff