]> err.no Git - linux-2.6/commitdiff
[PATCH] lockdep: irqtrace subsystem, i386 support
authorIngo Molnar <mingo@elte.hu>
Mon, 3 Jul 2006 07:24:43 +0000 (00:24 -0700)
committerLinus Torvalds <torvalds@g5.osdl.org>
Mon, 3 Jul 2006 22:27:03 +0000 (15:27 -0700)
Add irqflags-tracing support to i386.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
arch/i386/Kconfig.debug
arch/i386/kernel/entry.S
arch/i386/kernel/irq.c
include/asm-i386/irqflags.h [new file with mode: 0644]
include/asm-i386/spinlock.h
include/asm-i386/system.h

index b20ddd04f3d821c9df96c3da73f1f0a5df655400..b31c0802e1ccf53f1e5a677e802c5e34166ebc54 100644 (file)
@@ -1,5 +1,9 @@
 menu "Kernel hacking"
 
+config TRACE_IRQFLAGS_SUPPORT
+       bool
+       default y
+
 source "lib/Kconfig.debug"
 
 config EARLY_PRINTK
index 787190c45fdb783ddf6e19b7235f9710783bd97d..d9a260f2efb4d24086bf7ee4c1e8e1ab7eaf8c5e 100644 (file)
@@ -42,6 +42,7 @@
 
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
+#include <asm/irqflags.h>
 #include <asm/errno.h>
 #include <asm/segment.h>
 #include <asm/smp.h>
@@ -76,12 +77,21 @@ NT_MASK             = 0x00004000
 VM_MASK                = 0x00020000
 
 #ifdef CONFIG_PREEMPT
-#define preempt_stop           cli
+#define preempt_stop           cli; TRACE_IRQS_OFF
 #else
 #define preempt_stop
 #define resume_kernel          restore_nocheck
 #endif
 
+.macro TRACE_IRQS_IRET
+#ifdef CONFIG_TRACE_IRQFLAGS
+       testl $IF_MASK,EFLAGS(%esp)     # interrupts off?
+       jz 1f
+       TRACE_IRQS_ON
+1:
+#endif
+.endm
+
 #ifdef CONFIG_VM86
 #define resume_userspace_sig   check_userspace
 #else
@@ -257,6 +267,10 @@ ENTRY(sysenter_entry)
        CFI_REGISTER esp, ebp
        movl TSS_sysenter_esp0(%esp),%esp
 sysenter_past_esp:
+       /*
+        * No need to follow this irqs on/off section: the syscall
+        * disabled irqs and here we enable it straight after entry:
+        */
        sti
        pushl $(__USER_DS)
        CFI_ADJUST_CFA_OFFSET 4
@@ -303,6 +317,7 @@ sysenter_past_esp:
        call *sys_call_table(,%eax,4)
        movl %eax,EAX(%esp)
        cli
+       TRACE_IRQS_OFF
        movl TI_flags(%ebp), %ecx
        testw $_TIF_ALLWORK_MASK, %cx
        jne syscall_exit_work
@@ -310,6 +325,7 @@ sysenter_past_esp:
        movl EIP(%esp), %edx
        movl OLDESP(%esp), %ecx
        xorl %ebp,%ebp
+       TRACE_IRQS_ON
        sti
        sysexit
        CFI_ENDPROC
@@ -339,6 +355,7 @@ syscall_exit:
        cli                             # make sure we don't miss an interrupt
                                        # setting need_resched or sigpending
                                        # between sampling and the iret
+       TRACE_IRQS_OFF
        movl TI_flags(%ebp), %ecx
        testw $_TIF_ALLWORK_MASK, %cx   # current->work
        jne syscall_exit_work
@@ -355,12 +372,15 @@ restore_all:
        CFI_REMEMBER_STATE
        je ldt_ss                       # returning to user-space with LDT SS
 restore_nocheck:
+       TRACE_IRQS_IRET
+restore_nocheck_notrace:
        RESTORE_REGS
        addl $4, %esp
        CFI_ADJUST_CFA_OFFSET -4
 1:     iret
 .section .fixup,"ax"
 iret_exc:
+       TRACE_IRQS_ON
        sti
        pushl $0                        # no error code
        pushl $do_iret_error
@@ -386,11 +406,13 @@ ldt_ss:
        subl $8, %esp           # reserve space for switch16 pointer
        CFI_ADJUST_CFA_OFFSET 8
        cli
+       TRACE_IRQS_OFF
        movl %esp, %eax
        /* Set up the 16bit stack frame with switch32 pointer on top,
         * and a switch16 pointer on top of the current frame. */
        call setup_x86_bogus_stack
        CFI_ADJUST_CFA_OFFSET -8        # frame has moved
+       TRACE_IRQS_IRET
        RESTORE_REGS
        lss 20+4(%esp), %esp    # switch to 16bit stack
 1:     iret
@@ -411,6 +433,7 @@ work_resched:
        cli                             # make sure we don't miss an interrupt
                                        # setting need_resched or sigpending
                                        # between sampling and the iret
+       TRACE_IRQS_OFF
        movl TI_flags(%ebp), %ecx
        andl $_TIF_WORK_MASK, %ecx      # is there any work to be done other
                                        # than syscall tracing?
@@ -462,6 +485,7 @@ syscall_trace_entry:
 syscall_exit_work:
        testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
        jz work_pending
+       TRACE_IRQS_ON
        sti                             # could let do_syscall_trace() call
                                        # schedule() instead
        movl %esp, %eax
@@ -535,9 +559,14 @@ ENTRY(irq_entries_start)
 vector=vector+1
 .endr
 
+/*
+ * the CPU automatically disables interrupts when executing an IRQ vector,
+ * so IRQ-flags tracing has to follow that:
+ */
        ALIGN
 common_interrupt:
        SAVE_ALL
+       TRACE_IRQS_OFF
        movl %esp,%eax
        call do_IRQ
        jmp ret_from_intr
@@ -549,9 +578,10 @@ ENTRY(name)                                \
        pushl $~(nr);                   \
        CFI_ADJUST_CFA_OFFSET 4;        \
        SAVE_ALL;                       \
+       TRACE_IRQS_OFF                  \
        movl %esp,%eax;                 \
        call smp_/**/name;              \
-       jmp ret_from_intr;      \
+       jmp ret_from_intr;              \
        CFI_ENDPROC
 
 /* The include is where all of the SMP etc. interrupts come from */
@@ -726,7 +756,7 @@ nmi_stack_correct:
        xorl %edx,%edx          # zero error code
        movl %esp,%eax          # pt_regs pointer
        call do_nmi
-       jmp restore_all
+       jmp restore_nocheck_notrace
        CFI_ENDPROC
 
 nmi_stack_fixup:
index 16b4917039672bb3200e82c0325ef2f85134fbd9..6cb529f60dcc67c9232d1267112db5f5d09f91e3 100644 (file)
@@ -166,7 +166,7 @@ void irq_ctx_init(int cpu)
        irqctx->tinfo.task              = NULL;
        irqctx->tinfo.exec_domain       = NULL;
        irqctx->tinfo.cpu               = cpu;
-       irqctx->tinfo.preempt_count     = SOFTIRQ_OFFSET;
+       irqctx->tinfo.preempt_count     = 0;
        irqctx->tinfo.addr_limit        = MAKE_MM_SEG(0);
 
        softirq_ctx[cpu] = irqctx;
@@ -211,6 +211,10 @@ asmlinkage void do_softirq(void)
                        : "0"(isp)
                        : "memory", "cc", "edx", "ecx", "eax"
                );
+               /*
+                * Shouldnt happen, we returned above if in_interrupt():
+                */
+               WARN_ON_ONCE(softirq_count());
        }
 
        local_irq_restore(flags);
diff --git a/include/asm-i386/irqflags.h b/include/asm-i386/irqflags.h
new file mode 100644 (file)
index 0000000..ca777e8
--- /dev/null
@@ -0,0 +1,56 @@
+/*
+ * include/asm-i386/irqflags.h
+ *
+ * IRQ flags handling
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() macros from the lowlevel headers.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#define raw_local_save_flags(x)        do { typecheck(unsigned long,x); __asm__ __volatile__("pushfl ; popl %0":"=g" (x): /* no input */); } while (0)
+#define raw_local_irq_restore(x) do { typecheck(unsigned long,x); __asm__ __volatile__("pushl %0 ; popfl": /* no output */ :"g" (x):"memory", "cc"); } while (0)
+#define raw_local_irq_disable()        __asm__ __volatile__("cli": : :"memory")
+#define raw_local_irq_enable() __asm__ __volatile__("sti": : :"memory")
+/* used in the idle loop; sti takes one instruction cycle to complete */
+#define raw_safe_halt()                __asm__ __volatile__("sti; hlt": : :"memory")
+/* used when interrupts are already enabled or to shutdown the processor */
+#define halt()                 __asm__ __volatile__("hlt": : :"memory")
+
+#define raw_irqs_disabled_flags(flags) (!((flags) & (1<<9)))
+
+/* For spinlocks etc */
+#define raw_local_irq_save(x)  __asm__ __volatile__("pushfl ; popl %0 ; cli":"=g" (x): /* no input */ :"memory")
+
+/*
+ * Do the CPU's IRQ-state tracing from assembly code. We call a
+ * C function, so save all the C-clobbered registers:
+ */
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+# define TRACE_IRQS_ON                         \
+       pushl %eax;                             \
+       pushl %ecx;                             \
+       pushl %edx;                             \
+       call trace_hardirqs_on;                 \
+       popl %edx;                              \
+       popl %ecx;                              \
+       popl %eax;
+
+# define TRACE_IRQS_OFF                                \
+       pushl %eax;                             \
+       pushl %ecx;                             \
+       pushl %edx;                             \
+       call trace_hardirqs_off;                \
+       popl %edx;                              \
+       popl %ecx;                              \
+       popl %eax;
+
+#else
+# define TRACE_IRQS_ON
+# define TRACE_IRQS_OFF
+#endif
+
+#endif
index 04ba30234c486e383e73127a34cb3ea8bc3bb898..7e29b51bcaa0393355bcac586e888b55509c37e9 100644 (file)
        "jmp 1b\n" \
        "3:\n\t"
 
+/*
+ * NOTE: there's an irqs-on section here, which normally would have to be
+ * irq-traced, but on CONFIG_TRACE_IRQFLAGS we never use
+ * __raw_spin_lock_string_flags().
+ */
 #define __raw_spin_lock_string_flags \
        "\n1:\t" \
        "lock ; decb %0\n\t" \
index cab0180567f978164dd6bc3e7a566db1316273b6..db398d88b1d950eaad4ae4296dd14169b4faf826 100644 (file)
@@ -456,25 +456,7 @@ static inline unsigned long long __cmpxchg64(volatile void *ptr, unsigned long l
 
 #define set_wmb(var, value) do { var = value; wmb(); } while (0)
 
-/* interrupt control.. */
-#define local_save_flags(x)    do { typecheck(unsigned long,x); __asm__ __volatile__("pushfl ; popl %0":"=g" (x): /* no input */); } while (0)
-#define local_irq_restore(x)   do { typecheck(unsigned long,x); __asm__ __volatile__("pushl %0 ; popfl": /* no output */ :"g" (x):"memory", "cc"); } while (0)
-#define local_irq_disable()    __asm__ __volatile__("cli": : :"memory")
-#define local_irq_enable()     __asm__ __volatile__("sti": : :"memory")
-/* used in the idle loop; sti takes one instruction cycle to complete */
-#define safe_halt()            __asm__ __volatile__("sti; hlt": : :"memory")
-/* used when interrupts are already enabled or to shutdown the processor */
-#define halt()                 __asm__ __volatile__("hlt": : :"memory")
-
-#define irqs_disabled()                        \
-({                                     \
-       unsigned long flags;            \
-       local_save_flags(flags);        \
-       !(flags & (1<<9));              \
-})
-
-/* For spinlocks etc */
-#define local_irq_save(x)      __asm__ __volatile__("pushfl ; popl %0 ; cli":"=g" (x): /* no input */ :"memory")
+#include <linux/irqflags.h>
 
 /*
  * disable hlt during certain critical i/o operations