#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/workqueue.h>
+#include <linux/delay.h> /* for mdelay */
+#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_sas.h>
+#include <scsi/scsi_dbg.h>
#include "mptbase.h"
#include "mptscsih.h"
u32 device_info; /* bitfield detailed info about this device */
};
+/*
+ * Specific details on ports, wide/narrow
+ */
+struct mptsas_portinfo_details{
+ u8 port_id; /* port number provided to transport */
+ u16 num_phys; /* number of phys belong to this port */
+ u64 phy_bitmask; /* TODO, extend support for 255 phys */
+ struct sas_rphy *rphy; /* transport layer rphy object */
+ struct sas_port *port; /* transport layer port object */
+ struct scsi_target *starget;
+ struct mptsas_portinfo *port_info;
+};
+
struct mptsas_phyinfo {
u8 phy_id; /* phy index */
- u8 port_id; /* port number this phy is part of */
+ u8 port_id; /* firmware port identifier */
u8 negotiated_link_rate; /* nego'd link rate for this phy */
u8 hw_link_rate; /* hardware max/min phys link rate */
u8 programmed_link_rate; /* programmed max/min phy link rate */
+ u8 sas_port_add_phy; /* flag to request sas_port_add_phy*/
struct mptsas_devinfo identify; /* point to phy device info */
struct mptsas_devinfo attached; /* point to attached device info */
- struct sas_phy *phy;
- struct sas_rphy *rphy;
- struct scsi_target *starget;
+ struct sas_phy *phy; /* transport layer phy object */
+ struct mptsas_portinfo *portinfo;
+ struct mptsas_portinfo_details * port_details;
};
struct mptsas_portinfo {
struct list_head list;
u16 handle; /* unique id to address this */
- u8 num_phys; /* number of phys */
+ u16 num_phys; /* number of phys */
struct mptsas_phyinfo *phy_info;
};
u8 sep_channel; /* SEP channel logical channel id */
};
-#ifdef SASDEBUG
+#ifdef MPT_DEBUG_SAS
static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
{
printk("---- IO UNIT PAGE 0 ------------\n");
static inline int
mptsas_is_end_device(struct mptsas_devinfo * attached)
{
- if ((attached->handle) &&
+ if ((attached->sas_address) &&
(attached->device_info &
MPI_SAS_DEVICE_INFO_END_DEVICE) &&
((attached->device_info &
return 0;
}
+/* no mutex */
+void
+mptsas_port_delete(struct mptsas_portinfo_details * port_details)
+{
+ struct mptsas_portinfo *port_info;
+ struct mptsas_phyinfo *phy_info;
+ u8 i;
+
+ if (!port_details)
+ return;
+
+ port_info = port_details->port_info;
+ phy_info = port_info->phy_info;
+
+ dsaswideprintk((KERN_DEBUG "%s: [%p]: port=%02d num_phys=%02d "
+ "bitmask=0x%016llX\n",
+ __FUNCTION__, port_details, port_details->port_id,
+ port_details->num_phys, port_details->phy_bitmask));
+
+ for (i = 0; i < port_info->num_phys; i++, phy_info++) {
+ if(phy_info->port_details != port_details)
+ continue;
+ memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
+ phy_info->port_details = NULL;
+ }
+ kfree(port_details);
+}
+
+static inline struct sas_rphy *
+mptsas_get_rphy(struct mptsas_phyinfo *phy_info)
+{
+ if (phy_info->port_details)
+ return phy_info->port_details->rphy;
+ else
+ return NULL;
+}
+
+static inline void
+mptsas_set_rphy(struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy)
+{
+ if (phy_info->port_details) {
+ phy_info->port_details->rphy = rphy;
+ dsaswideprintk((KERN_DEBUG "sas_rphy_add: rphy=%p\n", rphy));
+ }
+
+#ifdef MPT_DEBUG_SAS_WIDE
+ if (rphy) {
+ dev_printk(KERN_DEBUG, &rphy->dev, "add:");
+ printk("rphy=%p release=%p\n",
+ rphy, rphy->dev.release);
+ }
+#endif
+}
+
+static inline struct sas_port *
+mptsas_get_port(struct mptsas_phyinfo *phy_info)
+{
+ if (phy_info->port_details)
+ return phy_info->port_details->port;
+ else
+ return NULL;
+}
+
+static inline void
+mptsas_set_port(struct mptsas_phyinfo *phy_info, struct sas_port *port)
+{
+ if (phy_info->port_details)
+ phy_info->port_details->port = port;
+
+#ifdef MPT_DEBUG_SAS_WIDE
+ if (port) {
+ dev_printk(KERN_DEBUG, &port->dev, "add: ");
+ printk("port=%p release=%p\n",
+ port, port->dev.release);
+ }
+#endif
+}
+
+static inline struct scsi_target *
+mptsas_get_starget(struct mptsas_phyinfo *phy_info)
+{
+ if (phy_info->port_details)
+ return phy_info->port_details->starget;
+ else
+ return NULL;
+}
+
+static inline void
+mptsas_set_starget(struct mptsas_phyinfo *phy_info, struct scsi_target *
+starget)
+{
+ if (phy_info->port_details)
+ phy_info->port_details->starget = starget;
+}
+
+
+/*
+ * mptsas_setup_wide_ports
+ *
+ * Updates for new and existing narrow/wide port configuration
+ * in the sas_topology
+ */
+void
+mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
+{
+ struct mptsas_portinfo_details * port_details;
+ struct mptsas_phyinfo *phy_info, *phy_info_cmp;
+ u64 sas_address;
+ int i, j;
+
+ mutex_lock(&ioc->sas_topology_mutex);
+
+ phy_info = port_info->phy_info;
+ for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) {
+ if (phy_info->attached.handle)
+ continue;
+ port_details = phy_info->port_details;
+ if (!port_details)
+ continue;
+ if (port_details->num_phys < 2)
+ continue;
+ /*
+ * Removing a phy from a port, letting the last
+ * phy be removed by firmware events.
+ */
+ dsaswideprintk((KERN_DEBUG
+ "%s: [%p]: port=%d deleting phy = %d\n",
+ __FUNCTION__, port_details,
+ port_details->port_id, i));
+ port_details->num_phys--;
+ port_details->phy_bitmask &= ~ (1 << phy_info->phy_id);
+ memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
+ sas_port_delete_phy(port_details->port, phy_info->phy);
+ phy_info->port_details = NULL;
+ }
+
+ /*
+ * Populate and refresh the tree
+ */
+ phy_info = port_info->phy_info;
+ for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) {
+ sas_address = phy_info->attached.sas_address;
+ dsaswideprintk((KERN_DEBUG "phy_id=%d sas_address=0x%018llX\n",
+ i, sas_address));
+ if (!sas_address)
+ continue;
+ port_details = phy_info->port_details;
+ /*
+ * Forming a port
+ */
+ if (!port_details) {
+ port_details = kzalloc(sizeof(*port_details),
+ GFP_KERNEL);
+ if (!port_details)
+ goto out;
+ port_details->num_phys = 1;
+ port_details->port_info = port_info;
+ port_details->port_id = ioc->port_serial_number++;
+ if (phy_info->phy_id < 64 )
+ port_details->phy_bitmask |=
+ (1 << phy_info->phy_id);
+ phy_info->sas_port_add_phy=1;
+ dsaswideprintk((KERN_DEBUG "\t\tForming port\n\t\t"
+ "phy_id=%d sas_address=0x%018llX\n",
+ i, sas_address));
+ phy_info->port_details = port_details;
+ }
+
+ if (i == port_info->num_phys - 1)
+ continue;
+ phy_info_cmp = &port_info->phy_info[i + 1];
+ for (j = i + 1 ; j < port_info->num_phys ; j++,
+ phy_info_cmp++) {
+ if (!phy_info_cmp->attached.sas_address)
+ continue;
+ if (sas_address != phy_info_cmp->attached.sas_address)
+ continue;
+ if (phy_info_cmp->port_details == port_details )
+ continue;
+ dsaswideprintk((KERN_DEBUG
+ "\t\tphy_id=%d sas_address=0x%018llX\n",
+ j, phy_info_cmp->attached.sas_address));
+ if (phy_info_cmp->port_details) {
+ port_details->rphy =
+ mptsas_get_rphy(phy_info_cmp);
+ port_details->port =
+ mptsas_get_port(phy_info_cmp);
+ port_details->starget =
+ mptsas_get_starget(phy_info_cmp);
+ port_details->port_id =
+ phy_info_cmp->port_details->port_id;
+ port_details->num_phys =
+ phy_info_cmp->port_details->num_phys;
+// port_info->port_serial_number--;
+ ioc->port_serial_number--;
+ if (!phy_info_cmp->port_details->num_phys)
+ kfree(phy_info_cmp->port_details);
+ } else
+ phy_info_cmp->sas_port_add_phy=1;
+ /*
+ * Adding a phy to a port
+ */
+ phy_info_cmp->port_details = port_details;
+ if (phy_info_cmp->phy_id < 64 )
+ port_details->phy_bitmask |=
+ (1 << phy_info_cmp->phy_id);
+ port_details->num_phys++;
+ }
+ }
+
+ out:
+
+#ifdef MPT_DEBUG_SAS_WIDE
+ for (i = 0; i < port_info->num_phys; i++) {
+ port_details = port_info->phy_info[i].port_details;
+ if (!port_details)
+ continue;
+ dsaswideprintk((KERN_DEBUG
+ "%s: [%p]: phy_id=%02d port_id=%02d num_phys=%02d "
+ "bitmask=0x%016llX\n",
+ __FUNCTION__,
+ port_details, i, port_details->port_id,
+ port_details->num_phys, port_details->phy_bitmask));
+ dsaswideprintk((KERN_DEBUG"\t\tport = %p rphy=%p\n",
+ port_details->port, port_details->rphy));
+ }
+ dsaswideprintk((KERN_DEBUG"\n"));
+#endif
+ mutex_unlock(&ioc->sas_topology_mutex);
+}
+
+static void
+mptsas_target_reset(MPT_ADAPTER *ioc, VirtTarget * vtarget)
+{
+ MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
+
+ if (mptscsih_TMHandler(hd,
+ MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
+ vtarget->bus_id, vtarget->target_id, 0, 0, 5) < 0) {
+ hd->tmPending = 0;
+ hd->tmState = TM_STATE_NONE;
+ printk(MYIOC_s_WARN_FMT
+ "Error processing TaskMgmt id=%d TARGET_RESET\n",
+ ioc->name, vtarget->target_id);
+ }
+}
+
static int
mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
u32 form, u32 form_specific)
return mptscsih_slave_configure(sdev);
}
-/*
- * This is pretty ugly. We will be able to seriously clean it up
- * once the DV code in mptscsih goes away and we can properly
- * implement ->target_alloc.
- */
+static int
+mptsas_target_alloc(struct scsi_target *starget)
+{
+ struct Scsi_Host *host = dev_to_shost(&starget->dev);
+ MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
+ VirtTarget *vtarget;
+ u32 target_id;
+ u32 channel;
+ struct sas_rphy *rphy;
+ struct mptsas_portinfo *p;
+ int i;
+
+ vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL);
+ if (!vtarget)
+ return -ENOMEM;
+
+ vtarget->starget = starget;
+ vtarget->ioc_id = hd->ioc->id;
+ vtarget->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY;
+
+ target_id = starget->id;
+ channel = 0;
+
+ hd->Targets[target_id] = vtarget;
+
+ /*
+ * RAID volumes placed beyond the last expected port.
+ */
+ if (starget->channel == hd->ioc->num_ports)
+ goto out;
+
+ rphy = dev_to_rphy(starget->dev.parent);
+ mutex_lock(&hd->ioc->sas_topology_mutex);
+ list_for_each_entry(p, &hd->ioc->sas_topology, list) {
+ for (i = 0; i < p->num_phys; i++) {
+ if (p->phy_info[i].attached.sas_address !=
+ rphy->identify.sas_address)
+ continue;
+ target_id = p->phy_info[i].attached.id;
+ channel = p->phy_info[i].attached.channel;
+ mptsas_set_starget(&p->phy_info[i], starget);
+
+ /*
+ * Exposing hidden raid components
+ */
+ if (mptscsih_is_phys_disk(hd->ioc, target_id)) {
+ target_id = mptscsih_raid_id_to_num(hd,
+ target_id);
+ vtarget->tflags |=
+ MPT_TARGET_FLAGS_RAID_COMPONENT;
+ }
+ mutex_unlock(&hd->ioc->sas_topology_mutex);
+ goto out;
+ }
+ }
+ mutex_unlock(&hd->ioc->sas_topology_mutex);
+
+ kfree(vtarget);
+ return -ENXIO;
+
+ out:
+ vtarget->target_id = target_id;
+ vtarget->bus_id = channel;
+ starget->hostdata = vtarget;
+ return 0;
+}
+
+static void
+mptsas_target_destroy(struct scsi_target *starget)
+{
+ struct Scsi_Host *host = dev_to_shost(&starget->dev);
+ MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
+ struct sas_rphy *rphy;
+ struct mptsas_portinfo *p;
+ int i;
+
+ if (!starget->hostdata)
+ return;
+
+ if (starget->channel == hd->ioc->num_ports)
+ goto out;
+
+ rphy = dev_to_rphy(starget->dev.parent);
+ list_for_each_entry(p, &hd->ioc->sas_topology, list) {
+ for (i = 0; i < p->num_phys; i++) {
+ if (p->phy_info[i].attached.sas_address !=
+ rphy->identify.sas_address)
+ continue;
+ mptsas_set_starget(&p->phy_info[i], NULL);
+ goto out;
+ }
+ }
+
+ out:
+ kfree(starget->hostdata);
+ starget->hostdata = NULL;
+}
+
+
static int
mptsas_slave_alloc(struct scsi_device *sdev)
{
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
struct sas_rphy *rphy;
struct mptsas_portinfo *p;
- VirtTarget *vtarget;
VirtDevice *vdev;
struct scsi_target *starget;
- u32 target_id;
- int i;
+ int i;
vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
if (!vdev) {
- printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
+ printk(MYIOC_s_ERR_FMT "slave_alloc kzalloc(%zd) FAILED!\n",
hd->ioc->name, sizeof(VirtDevice));
return -ENOMEM;
}
- sdev->hostdata = vdev;
starget = scsi_target(sdev);
- vtarget = starget->hostdata;
- vtarget->ioc_id = hd->ioc->id;
- vdev->vtarget = vtarget;
- if (vtarget->num_luns == 0) {
- vtarget->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY;
- hd->Targets[sdev->id] = vtarget;
- }
+ vdev->vtarget = starget->hostdata;
/*
- RAID volumes placed beyond the last expected port.
- */
- if (sdev->channel == hd->ioc->num_ports) {
- target_id = sdev->id;
- vtarget->bus_id = 0;
- vdev->lun = 0;
+ * RAID volumes placed beyond the last expected port.
+ */
+ if (sdev->channel == hd->ioc->num_ports)
goto out;
- }
rphy = dev_to_rphy(sdev->sdev_target->dev.parent);
mutex_lock(&hd->ioc->sas_topology_mutex);
list_for_each_entry(p, &hd->ioc->sas_topology, list) {
for (i = 0; i < p->num_phys; i++) {
- if (p->phy_info[i].attached.sas_address ==
- rphy->identify.sas_address) {
- target_id = p->phy_info[i].attached.id;
- vtarget->bus_id = p->phy_info[i].attached.channel;
- vdev->lun = sdev->lun;
- p->phy_info[i].starget = sdev->sdev_target;
- /*
- * Exposing hidden disk (RAID)
- */
- if (mptscsih_is_phys_disk(hd->ioc, target_id)) {
- target_id = mptscsih_raid_id_to_num(hd,
- target_id);
- vdev->vtarget->tflags |=
- MPT_TARGET_FLAGS_RAID_COMPONENT;
- sdev->no_uld_attach = 1;
- }
- mutex_unlock(&hd->ioc->sas_topology_mutex);
- goto out;
- }
+ if (p->phy_info[i].attached.sas_address !=
+ rphy->identify.sas_address)
+ continue;
+ vdev->lun = sdev->lun;
+ /*
+ * Exposing hidden raid components
+ */
+ if (mptscsih_is_phys_disk(hd->ioc,
+ p->phy_info[i].attached.id))
+ sdev->no_uld_attach = 1;
+ mutex_unlock(&hd->ioc->sas_topology_mutex);
+ goto out;
}
}
mutex_unlock(&hd->ioc->sas_topology_mutex);
return -ENXIO;
out:
- vtarget->target_id = target_id;
- vtarget->num_luns++;
+ vdev->vtarget->num_luns++;
+ sdev->hostdata = vdev;
return 0;
}
-static void
-mptsas_slave_destroy(struct scsi_device *sdev)
+static int
+mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
- struct Scsi_Host *host = sdev->host;
- MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
- VirtDevice *vdev;
+ VirtDevice *vdev = SCpnt->device->hostdata;
- /*
- * Issue target reset to flush firmware outstanding commands.
- */
- vdev = sdev->hostdata;
- if (vdev->configured_lun){
- if (mptscsih_TMHandler(hd,
- MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
- vdev->vtarget->bus_id,
- vdev->vtarget->target_id,
- 0, 0, 5 /* 5 second timeout */)
- < 0){
-
- /* The TM request failed!
- * Fatal error case.
- */
- printk(MYIOC_s_WARN_FMT
- "Error processing TaskMgmt id=%d TARGET_RESET\n",
- hd->ioc->name,
- vdev->vtarget->target_id);
-
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- }
+// scsi_print_command(SCpnt);
+ if (vdev->vtarget->deleted) {
+ SCpnt->result = DID_NO_CONNECT << 16;
+ done(SCpnt);
+ return 0;
}
- mptscsih_slave_destroy(sdev);
+
+ return mptscsih_qcmd(SCpnt,done);
}
+
static struct scsi_host_template mptsas_driver_template = {
.module = THIS_MODULE,
.proc_name = "mptsas",
.proc_info = mptscsih_proc_info,
.name = "MPT SPI Host",
.info = mptscsih_info,
- .queuecommand = mptscsih_qcmd,
- .target_alloc = mptscsih_target_alloc,
+ .queuecommand = mptsas_qcmd,
+ .target_alloc = mptsas_target_alloc,
.slave_alloc = mptsas_slave_alloc,
.slave_configure = mptsas_slave_configure,
- .target_destroy = mptscsih_target_destroy,
- .slave_destroy = mptsas_slave_destroy,
+ .target_destroy = mptsas_target_destroy,
+ .slave_destroy = mptscsih_slave_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_abort_handler = mptscsih_abort,
.eh_device_reset_handler = mptscsih_dev_reset,
port_info->num_phys = buffer->NumPhys;
port_info->phy_info = kcalloc(port_info->num_phys,
- sizeof(struct mptsas_phyinfo),GFP_KERNEL);
+ sizeof(*port_info->phy_info),GFP_KERNEL);
if (!port_info->phy_info) {
error = -ENOMEM;
goto out_free_consistent;
buffer->PhyData[i].Port;
port_info->phy_info[i].negotiated_link_rate =
buffer->PhyData[i].NegotiatedLinkRate;
+ port_info->phy_info[i].portinfo = port_info;
}
out_free_consistent:
CONFIGPARMS cfg;
SasExpanderPage0_t *buffer;
dma_addr_t dma_handle;
- int error;
+ int i, error;
hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
hdr.ExtPageLength = 0;
port_info->num_phys = buffer->NumPhys;
port_info->handle = le16_to_cpu(buffer->DevHandle);
port_info->phy_info = kcalloc(port_info->num_phys,
- sizeof(struct mptsas_phyinfo),GFP_KERNEL);
+ sizeof(*port_info->phy_info),GFP_KERNEL);
if (!port_info->phy_info) {
error = -ENOMEM;
goto out_free_consistent;
}
+ for (i = 0; i < port_info->num_phys; i++)
+ port_info->phy_info[i].portinfo = port_info;
+
out_free_consistent:
pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
buffer, dma_handle);
{
MPT_ADAPTER *ioc;
struct sas_phy *phy;
- int error;
+ struct sas_port *port;
+ int error = 0;
- if (!dev)
- return -ENODEV;
+ if (!dev) {
+ error = -ENODEV;
+ goto out;
+ }
if (!phy_info->phy) {
phy = sas_phy_alloc(dev, index);
- if (!phy)
- return -ENOMEM;
+ if (!phy) {
+ error = -ENOMEM;
+ goto out;
+ }
} else
phy = phy_info->phy;
- phy->port_identifier = phy_info->port_id;
mptsas_parse_device_info(&phy->identify, &phy_info->identify);
/*
error = sas_phy_add(phy);
if (error) {
sas_phy_free(phy);
- return error;
+ goto out;
}
phy_info->phy = phy;
}
- if ((phy_info->attached.handle) &&
- (!phy_info->rphy)) {
+ if (!phy_info->attached.handle ||
+ !phy_info->port_details)
+ goto out;
+
+ port = mptsas_get_port(phy_info);
+ ioc = phy_to_ioc(phy_info->phy);
+
+ if (phy_info->sas_port_add_phy) {
+
+ if (!port) {
+ port = sas_port_alloc(dev,
+ phy_info->port_details->port_id);
+ dsaswideprintk((KERN_DEBUG
+ "sas_port_alloc: port=%p dev=%p port_id=%d\n",
+ port, dev, phy_info->port_details->port_id));
+ if (!port) {
+ error = -ENOMEM;
+ goto out;
+ }
+ error = sas_port_add(port);
+ if (error) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
+ goto out;
+ }
+ mptsas_set_port(phy_info, port);
+ }
+ dsaswideprintk((KERN_DEBUG "sas_port_add_phy: phy_id=%d\n",
+ phy_info->phy_id));
+ sas_port_add_phy(port, phy_info->phy);
+ phy_info->sas_port_add_phy = 0;
+ }
+
+ if (!mptsas_get_rphy(phy_info) && port && !port->rphy) {
struct sas_rphy *rphy;
struct sas_identify identify;
- ioc = phy_to_ioc(phy_info->phy);
-
/*
* Let the hotplug_work thread handle processing
* the adding/removing of devices that occur
*/
if (ioc->sas_discovery_runtime &&
mptsas_is_end_device(&phy_info->attached))
- return 0;
+ goto out;
mptsas_parse_device_info(&identify, &phy_info->attached);
switch (identify.device_type) {
case SAS_END_DEVICE:
- rphy = sas_end_device_alloc(phy);
+ rphy = sas_end_device_alloc(port);
break;
case SAS_EDGE_EXPANDER_DEVICE:
case SAS_FANOUT_EXPANDER_DEVICE:
- rphy = sas_expander_alloc(phy, identify.device_type);
+ rphy = sas_expander_alloc(port, identify.device_type);
break;
default:
rphy = NULL;
break;
}
- if (!rphy)
- return 0; /* non-fatal: an rphy can be added later */
+ if (!rphy) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
+ goto out;
+ }
rphy->identify = identify;
-
error = sas_rphy_add(rphy);
if (error) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
sas_rphy_free(rphy);
- return error;
+ goto out;
}
-
- phy_info->rphy = rphy;
+ mptsas_set_rphy(phy_info, rphy);
}
- return 0;
+ out:
+ return error;
}
static int
for (i = 0; i < hba->num_phys; i++)
port_info->phy_info[i].negotiated_link_rate =
hba->phy_info[i].negotiated_link_rate;
- if (hba->phy_info)
- kfree(hba->phy_info);
+ kfree(hba->phy_info);
kfree(hba);
hba = NULL;
}
port_info->phy_info[i].phy_id;
handle = port_info->phy_info[i].identify.handle;
- if (port_info->phy_info[i].attached.handle) {
+ if (port_info->phy_info[i].attached.handle)
mptsas_sas_device_pg0(ioc,
&port_info->phy_info[i].attached,
(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
port_info->phy_info[i].attached.handle);
- }
+ }
+ mptsas_setup_wide_ports(ioc, port_info);
+
+ for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++)
mptsas_probe_one_phy(&ioc->sh->shost_gendev,
&port_info->phy_info[i], ioc->sas_index, 1);
- ioc->sas_index++;
- }
return 0;
out_free_port_info:
- if (hba)
- kfree(hba);
+ kfree(hba);
out:
return error;
}
mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle)
{
struct mptsas_portinfo *port_info, *p, *ex;
+ struct device *parent;
+ struct sas_rphy *rphy;
int error = -ENOMEM, i, j;
ex = kzalloc(sizeof(*port_info), GFP_KERNEL);
list_add_tail(&port_info->list, &ioc->sas_topology);
} else {
port_info->handle = ex->handle;
- if (ex->phy_info)
- kfree(ex->phy_info);
+ kfree(ex->phy_info);
kfree(ex);
ex = NULL;
}
mutex_unlock(&ioc->sas_topology_mutex);
for (i = 0; i < port_info->num_phys; i++) {
- struct device *parent;
-
mptsas_sas_expander_pg1(ioc, &port_info->phy_info[i],
(MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM <<
MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + *handle);
port_info->phy_info[i].attached.phy_id =
port_info->phy_info[i].phy_id;
}
+ }
- /*
- * If we find a parent port handle this expander is
- * attached to another expander, else it hangs of the
- * HBA phys.
- */
- parent = &ioc->sh->shost_gendev;
+ parent = &ioc->sh->shost_gendev;
+ for (i = 0; i < port_info->num_phys; i++) {
mutex_lock(&ioc->sas_topology_mutex);
list_for_each_entry(p, &ioc->sas_topology, list) {
for (j = 0; j < p->num_phys; j++) {
- if (port_info->phy_info[i].identify.handle ==
+ if (port_info->phy_info[i].identify.handle !=
p->phy_info[j].attached.handle)
- parent = &p->phy_info[j].rphy->dev;
+ continue;
+ rphy = mptsas_get_rphy(&p->phy_info[j]);
+ parent = &rphy->dev;
}
}
mutex_unlock(&ioc->sas_topology_mutex);
+ }
+
+ mptsas_setup_wide_ports(ioc, port_info);
+ for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++)
mptsas_probe_one_phy(parent, &port_info->phy_info[i],
ioc->sas_index, 0);
- ioc->sas_index++;
- }
return 0;
out_free_port_info:
if (ex) {
- if (ex->phy_info)
- kfree(ex->phy_info);
+ kfree(ex->phy_info);
kfree(ex);
}
out:
{
struct mptsas_portinfo buffer;
struct mptsas_portinfo *port_info, *n, *parent;
+ struct mptsas_phyinfo *phy_info;
+ struct scsi_target * starget;
+ VirtTarget * vtarget;
+ struct sas_port * port;
int i;
+ u64 expander_sas_address;
mutex_lock(&ioc->sas_topology_mutex);
list_for_each_entry_safe(port_info, n, &ioc->sas_topology, list) {
(MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
MPI_SAS_EXPAND_PGAD_FORM_SHIFT), port_info->handle)) {
+ /*
+ * Issue target reset to all child end devices
+ * then mark them deleted to prevent further
+ * IO going to them.
+ */
+ phy_info = port_info->phy_info;
+ for (i = 0; i < port_info->num_phys; i++, phy_info++) {
+ starget = mptsas_get_starget(phy_info);
+ if (!starget)
+ continue;
+ vtarget = starget->hostdata;
+ if(vtarget->deleted)
+ continue;
+ vtarget->deleted = 1;
+ mptsas_target_reset(ioc, vtarget);
+ sas_port_delete(mptsas_get_port(phy_info));
+ mptsas_port_delete(phy_info->port_details);
+ }
+
/*
* Obtain the port_info instance to the parent port
*/
if (!parent)
goto next_port;
+ expander_sas_address =
+ port_info->phy_info[0].identify.sas_address;
+
/*
* Delete rphys in the parent that point
* to this expander. The transport layer will
* cleanup all the children.
*/
- for (i = 0; i < parent->num_phys; i++) {
- if ((!parent->phy_info[i].rphy) ||
- (parent->phy_info[i].attached.sas_address !=
- port_info->phy_info[i].identify.sas_address))
+ phy_info = parent->phy_info;
+ for (i = 0; i < parent->num_phys; i++, phy_info++) {
+ port = mptsas_get_port(phy_info);
+ if (!port)
+ continue;
+ if (phy_info->attached.sas_address !=
+ expander_sas_address)
continue;
- sas_rphy_delete(parent->phy_info[i].rphy);
- memset(&parent->phy_info[i].attached, 0,
- sizeof(struct mptsas_devinfo));
- parent->phy_info[i].rphy = NULL;
- parent->phy_info[i].starget = NULL;
+#ifdef MPT_DEBUG_SAS_WIDE
+ dev_printk(KERN_DEBUG, &port->dev, "delete\n");
+#endif
+ sas_port_delete(port);
+ mptsas_port_delete(phy_info->port_details);
}
next_port:
+
+ phy_info = port_info->phy_info;
+ for (i = 0; i < port_info->num_phys; i++, phy_info++)
+ mptsas_port_delete(phy_info->port_details);
+
list_del(&port_info->list);
- if (port_info->phy_info)
- kfree(port_info->phy_info);
+ kfree(port_info->phy_info);
kfree(port_info);
}
/*
* Free this memory allocated from inside
* mptsas_sas_expander_pg0
*/
- if (buffer.phy_info)
- kfree(buffer.phy_info);
+ kfree(buffer.phy_info);
}
mutex_unlock(&ioc->sas_topology_mutex);
}
/*
* Work queue thread to handle Runtime discovery
* Mere purpose is the hot add/delete of expanders
+ *(Mutex UNLOCKED)
*/
static void
-mptscsih_discovery_work(void * arg)
+__mptsas_discovery_work(MPT_ADAPTER *ioc)
{
- struct mptsas_discovery_event *ev = arg;
- MPT_ADAPTER *ioc = ev->ioc;
u32 handle = 0xFFFF;
- mutex_lock(&ioc->sas_discovery_mutex);
ioc->sas_discovery_runtime=1;
mptsas_delete_expander_phys(ioc);
mptsas_probe_hba_phys(ioc);
while (!mptsas_probe_expander_phys(ioc, &handle))
;
- kfree(ev);
ioc->sas_discovery_runtime=0;
+}
+
+/*
+ * Work queue thread to handle Runtime discovery
+ * Mere purpose is the hot add/delete of expanders
+ *(Mutex LOCKED)
+ */
+static void
+mptsas_discovery_work(void * arg)
+{
+ struct mptsas_discovery_event *ev = arg;
+ MPT_ADAPTER *ioc = ev->ioc;
+
+ mutex_lock(&ioc->sas_discovery_mutex);
+ __mptsas_discovery_work(ioc);
mutex_unlock(&ioc->sas_discovery_mutex);
+ kfree(ev);
}
static struct mptsas_phyinfo *
-mptsas_find_phyinfo_by_parent(MPT_ADAPTER *ioc, u16 parent_handle, u8 phy_id)
+mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
{
struct mptsas_portinfo *port_info;
- struct mptsas_devinfo device_info;
struct mptsas_phyinfo *phy_info = NULL;
- int i, error;
-
- /*
- * Retrieve the parent sas_address
- */
- error = mptsas_sas_device_pg0(ioc, &device_info,
- (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
- MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
- parent_handle);
- if (error)
- return NULL;
+ int i;
- /*
- * The phy_info structures are never deallocated during lifetime of
- * a host, so the code below is safe without additional refcounting.
- */
mutex_lock(&ioc->sas_topology_mutex);
list_for_each_entry(port_info, &ioc->sas_topology, list) {
for (i = 0; i < port_info->num_phys; i++) {
- if (port_info->phy_info[i].identify.sas_address ==
- device_info.sas_address &&
- port_info->phy_info[i].phy_id == phy_id) {
- phy_info = &port_info->phy_info[i];
- break;
- }
+ if (port_info->phy_info[i].attached.sas_address
+ != sas_address)
+ continue;
+ if (!mptsas_is_end_device(
+ &port_info->phy_info[i].attached))
+ continue;
+ phy_info = &port_info->phy_info[i];
+ break;
}
}
mutex_unlock(&ioc->sas_topology_mutex);
-
return phy_info;
}
struct mptsas_phyinfo *phy_info = NULL;
int i;
- /*
- * The phy_info structures are never deallocated during lifetime of
- * a host, so the code below is safe without additional refcounting.
- */
mutex_lock(&ioc->sas_topology_mutex);
list_for_each_entry(port_info, &ioc->sas_topology, list) {
- for (i = 0; i < port_info->num_phys; i++)
- if (mptsas_is_end_device(&port_info->phy_info[i].attached))
- if (port_info->phy_info[i].attached.id == id) {
- phy_info = &port_info->phy_info[i];
- break;
- }
+ for (i = 0; i < port_info->num_phys; i++) {
+ if (port_info->phy_info[i].attached.id != id)
+ continue;
+ if (!mptsas_is_end_device(
+ &port_info->phy_info[i].attached))
+ continue;
+ phy_info = &port_info->phy_info[i];
+ break;
+ }
}
mutex_unlock(&ioc->sas_topology_mutex);
-
return phy_info;
}
* Work queue thread to clear the persitency table
*/
static void
-mptscsih_sas_persist_clear_table(void * arg)
+mptsas_persist_clear_table(void * arg)
{
MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
mptsas_reprobe_lun);
}
-
/*
* Work queue thread to handle SAS hotplug events
*/
MPT_ADAPTER *ioc = ev->ioc;
struct mptsas_phyinfo *phy_info;
struct sas_rphy *rphy;
+ struct sas_port *port;
struct scsi_device *sdev;
+ struct scsi_target * starget;
struct sas_identify identify;
char *ds = NULL;
struct mptsas_devinfo sas_device;
VirtTarget *vtarget;
+ VirtDevice *vdevice;
- mutex_lock(&ioc->sas_discovery_mutex);
+ mutex_lock(&ioc->sas_discovery_mutex);
switch (ev->event_type) {
case MPTSAS_DEL_DEVICE:
/*
* Sanity checks, for non-existing phys and remote rphys.
*/
- if (!phy_info)
+ if (!phy_info || !phy_info->port_details) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
break;
- if (!phy_info->rphy)
+ }
+ rphy = mptsas_get_rphy(phy_info);
+ if (!rphy) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
+ break;
+ }
+ port = mptsas_get_port(phy_info);
+ if (!port) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
break;
- if (phy_info->starget) {
- vtarget = phy_info->starget->hostdata;
+ }
+
+ starget = mptsas_get_starget(phy_info);
+ if (starget) {
+ vtarget = starget->hostdata;
- if (!vtarget)
+ if (!vtarget) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
break;
+ }
+
/*
* Handling RAID components
*/
if (ev->phys_disk_num_valid) {
vtarget->target_id = ev->phys_disk_num;
vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
- mptsas_reprobe_target(vtarget->starget, 1);
+ mptsas_reprobe_target(starget, 1);
break;
}
+
+ vtarget->deleted = 1;
+ mptsas_target_reset(ioc, vtarget);
}
if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET)
"removing %s device, channel %d, id %d, phy %d\n",
ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
- sas_rphy_delete(phy_info->rphy);
- memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
- phy_info->rphy = NULL;
- phy_info->starget = NULL;
+#ifdef MPT_DEBUG_SAS_WIDE
+ dev_printk(KERN_DEBUG, &port->dev, "delete\n");
+#endif
+ sas_port_delete(port);
+ mptsas_port_delete(phy_info->port_details);
break;
case MPTSAS_ADD_DEVICE:
*/
if (mptsas_sas_device_pg0(ioc, &sas_device,
(MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
- MPI_SAS_DEVICE_PGAD_FORM_SHIFT), ev->id))
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT), ev->id)) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
break;
+ }
- phy_info = mptsas_find_phyinfo_by_parent(ioc,
- sas_device.handle_parent, sas_device.phy_id);
+ ssleep(2);
+ __mptsas_discovery_work(ioc);
- if (!phy_info) {
- u32 handle = 0xFFFF;
+ phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+ sas_device.sas_address);
- /*
- * Its possible when an expander has been hot added
- * containing attached devices, the sas firmware
- * may send a RC_ADDED event prior to the
- * DISCOVERY STOP event. If that occurs, our
- * view of the topology in the driver in respect to this
- * expander might of not been setup, and we hit this
- * condition.
- * Therefore, this code kicks off discovery to
- * refresh the data.
- * Then again, we check whether the parent phy has
- * been created.
- */
- ioc->sas_discovery_runtime=1;
- mptsas_delete_expander_phys(ioc);
- mptsas_probe_hba_phys(ioc);
- while (!mptsas_probe_expander_phys(ioc, &handle))
- ;
- ioc->sas_discovery_runtime=0;
-
- phy_info = mptsas_find_phyinfo_by_parent(ioc,
- sas_device.handle_parent, sas_device.phy_id);
- if (!phy_info)
- break;
+ if (!phy_info || !phy_info->port_details) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
+ break;
}
- if (phy_info->starget) {
- vtarget = phy_info->starget->hostdata;
+ starget = mptsas_get_starget(phy_info);
+ if (starget) {
+ vtarget = starget->hostdata;
- if (!vtarget)
+ if (!vtarget) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
break;
+ }
/*
* Handling RAID components
*/
if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
vtarget->tflags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT;
vtarget->target_id = ev->id;
- mptsas_reprobe_target(phy_info->starget, 0);
+ mptsas_reprobe_target(starget, 0);
}
break;
}
- if (phy_info->rphy)
+ if (mptsas_get_rphy(phy_info)) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
break;
+ }
+ port = mptsas_get_port(phy_info);
+ if (!port) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
+ break;
+ }
memcpy(&phy_info->attached, &sas_device,
sizeof(struct mptsas_devinfo));
ioc->name, ds, ev->channel, ev->id, ev->phy_id);
mptsas_parse_device_info(&identify, &phy_info->attached);
- switch (identify.device_type) {
- case SAS_END_DEVICE:
- rphy = sas_end_device_alloc(phy_info->phy);
- break;
- case SAS_EDGE_EXPANDER_DEVICE:
- case SAS_FANOUT_EXPANDER_DEVICE:
- rphy = sas_expander_alloc(phy_info->phy, identify.device_type);
- break;
- default:
- rphy = NULL;
- break;
- }
- if (!rphy)
+ rphy = sas_end_device_alloc(port);
+ if (!rphy) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
break; /* non-fatal: an rphy can be added later */
+ }
rphy->identify = identify;
if (sas_rphy_add(rphy)) {
+ dfailprintk((MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __FUNCTION__, __LINE__));
sas_rphy_free(rphy);
break;
}
-
- phy_info->rphy = rphy;
+ mptsas_set_rphy(phy_info, rphy);
break;
case MPTSAS_ADD_RAID:
sdev = scsi_device_lookup(
printk(MYIOC_s_INFO_FMT
"removing raid volume, channel %d, id %d\n",
ioc->name, ioc->num_ports, ev->id);
+ vdevice = sdev->hostdata;
+ vdevice->vtarget->deleted = 1;
+ mptsas_target_reset(ioc, vdevice->vtarget);
scsi_remove_device(sdev);
scsi_device_put(sdev);
mpt_findImVolumes(ioc);
break;
}
- kfree(ev);
mutex_unlock(&ioc->sas_discovery_mutex);
+ kfree(ev);
+
}
static void
-mptscsih_send_sas_event(MPT_ADAPTER *ioc,
+mptsas_send_sas_event(MPT_ADAPTER *ioc,
EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data)
{
struct mptsas_hotplug_event *ev;
switch (sas_event_data->ReasonCode) {
case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
- ev = kmalloc(sizeof(*ev), GFP_ATOMIC);
+ ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
if (!ev) {
printk(KERN_WARNING "mptsas: lost hotplug event\n");
break;
/*
* Persistent table is full.
*/
- INIT_WORK(&ioc->mptscsih_persistTask,
- mptscsih_sas_persist_clear_table,
- (void *)ioc);
- schedule_work(&ioc->mptscsih_persistTask);
+ INIT_WORK(&ioc->sas_persist_task,
+ mptsas_persist_clear_table, (void *)ioc);
+ schedule_work(&ioc->sas_persist_task);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
/* TODO */
}
static void
-mptscsih_send_raid_event(MPT_ADAPTER *ioc,
+mptsas_send_raid_event(MPT_ADAPTER *ioc,
EVENT_DATA_RAID *raid_event_data)
{
struct mptsas_hotplug_event *ev;
if (ioc->bus_type != SAS)
return;
- ev = kmalloc(sizeof(*ev), GFP_ATOMIC);
+ ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
if (!ev) {
printk(KERN_WARNING "mptsas: lost hotplug event\n");
return;
}
- memset(ev,0,sizeof(struct mptsas_hotplug_event));
INIT_WORK(&ev->work, mptsas_hotplug_work, ev);
ev->ioc = ioc;
ev->id = raid_event_data->VolumeID;
}
static void
-mptscsih_send_discovery(MPT_ADAPTER *ioc,
+mptsas_send_discovery_event(MPT_ADAPTER *ioc,
EVENT_DATA_SAS_DISCOVERY *discovery_data)
{
struct mptsas_discovery_event *ev;
if (discovery_data->DiscoveryStatus)
return;
- ev = kmalloc(sizeof(*ev), GFP_ATOMIC);
+ ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
if (!ev)
return;
- memset(ev,0,sizeof(struct mptsas_discovery_event));
- INIT_WORK(&ev->work, mptscsih_discovery_work, ev);
+ INIT_WORK(&ev->work, mptsas_discovery_work, ev);
ev->ioc = ioc;
schedule_work(&ev->work);
};
switch (event) {
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
- mptscsih_send_sas_event(ioc,
+ mptsas_send_sas_event(ioc,
(EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data);
break;
case MPI_EVENT_INTEGRATED_RAID:
- mptscsih_send_raid_event(ioc,
+ mptsas_send_raid_event(ioc,
(EVENT_DATA_RAID *)reply->Data);
break;
case MPI_EVENT_PERSISTENT_TABLE_FULL:
- INIT_WORK(&ioc->mptscsih_persistTask,
- mptscsih_sas_persist_clear_table,
+ INIT_WORK(&ioc->sas_persist_task,
+ mptsas_persist_clear_table,
(void *)ioc);
- schedule_work(&ioc->mptscsih_persistTask);
+ schedule_work(&ioc->sas_persist_task);
break;
case MPI_EVENT_SAS_DISCOVERY:
- mptscsih_send_discovery(ioc,
+ mptsas_send_discovery_event(ioc,
(EVENT_DATA_SAS_DISCOVERY *)reply->Data);
break;
default:
return 0;
-out_mptsas_probe:
+ out_mptsas_probe:
mptscsih_remove(pdev);
return error;
{
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
struct mptsas_portinfo *p, *n;
+ int i;
ioc->sas_discovery_ignore_events=1;
sas_remove_host(ioc->sh);
mutex_lock(&ioc->sas_topology_mutex);
list_for_each_entry_safe(p, n, &ioc->sas_topology, list) {
list_del(&p->list);
- if (p->phy_info)
- kfree(p->phy_info);
+ for (i = 0 ; i < p->num_phys ; i++)
+ mptsas_port_delete(p->phy_info[i].port_details);
+ kfree(p->phy_info);
kfree(p);
}
mutex_unlock(&ioc->sas_topology_mutex);
projects / linux-2.6 / commitdiff