--- /dev/null
+/*
+ * cafe_nand.c
+ *
+ * Copyright © 2006 Red Hat, Inc.
+ * Copyright © 2006 David Woodhouse <dwmw2@infradead.org>
+ */
+
+//#define DEBUG
+
+#include <linux/device.h>
+#undef DEBUG
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+
+#define CAFE_NAND_CTRL1 0x00
+#define CAFE_NAND_CTRL2 0x04
+#define CAFE_NAND_CTRL3 0x08
+#define CAFE_NAND_STATUS 0x0c
+#define CAFE_NAND_IRQ 0x10
+#define CAFE_NAND_IRQ_MASK 0x14
+#define CAFE_NAND_DATA_LEN 0x18
+#define CAFE_NAND_ADDR1 0x1c
+#define CAFE_NAND_ADDR2 0x20
+#define CAFE_NAND_TIMING1 0x24
+#define CAFE_NAND_TIMING2 0x28
+#define CAFE_NAND_TIMING3 0x2c
+#define CAFE_NAND_NONMEM 0x30
+#define CAFE_NAND_DMA_CTRL 0x40
+#define CAFE_NAND_DMA_ADDR0 0x44
+#define CAFE_NAND_DMA_ADDR1 0x48
+#define CAFE_NAND_READ_DATA 0x1000
+#define CAFE_NAND_WRITE_DATA 0x2000
+
+struct cafe_priv {
+ struct nand_chip nand;
+ struct pci_dev *pdev;
+ void __iomem *mmio;
+ uint32_t ctl1;
+ uint32_t ctl2;
+ int datalen;
+ int nr_data;
+ int data_pos;
+ int page_addr;
+ dma_addr_t dmaaddr;
+ unsigned char *dmabuf;
+
+};
+
+static int usedma = 1;
+module_param(usedma, int, 0644);
+
+static int cafe_device_ready(struct mtd_info *mtd)
+{
+ struct cafe_priv *cafe = mtd->priv;
+ int result = !!(readl(cafe->mmio + CAFE_NAND_STATUS) | 0x40000000);
+
+ uint32_t irqs = readl(cafe->mmio + 0x10);
+ writel(irqs, cafe->mmio+0x10);
+ dev_dbg(&cafe->pdev->dev, "NAND device is%s ready, IRQ %x (%x) (%x,%x)\n",
+ result?"":" not", irqs, readl(cafe->mmio + 0x10),
+ readl(cafe->mmio + 0x3008), readl(cafe->mmio + 0x300c));
+ return result;
+}
+
+
+static void cafe_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ if (usedma)
+ memcpy(cafe->dmabuf + cafe->datalen, buf, len);
+ else
+ memcpy_toio(cafe->mmio + CAFE_NAND_WRITE_DATA + cafe->datalen, buf, len);
+ cafe->datalen += len;
+
+ dev_dbg(&cafe->pdev->dev, "Copy 0x%x bytes to write buffer. datalen 0x%x\n",
+ len, cafe->datalen);
+}
+
+static void cafe_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ if (usedma)
+ memcpy(buf, cafe->dmabuf + cafe->datalen, len);
+ else
+ memcpy_fromio(buf, cafe->mmio + CAFE_NAND_READ_DATA + cafe->datalen, len);
+
+ dev_dbg(&cafe->pdev->dev, "Copy 0x%x bytes from position 0x%x in read buffer.\n",
+ len, cafe->datalen);
+ cafe->datalen += len;
+}
+
+static uint8_t cafe_read_byte(struct mtd_info *mtd)
+{
+ struct cafe_priv *cafe = mtd->priv;
+ uint8_t d;
+
+ cafe_read_buf(mtd, &d, 1);
+ dev_dbg(&cafe->pdev->dev, "Read %02x\n", d);
+
+ return d;
+}
+
+static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr)
+{
+ struct cafe_priv *cafe = mtd->priv;
+ int adrbytes = 0;
+ uint32_t ctl1;
+ uint32_t doneint = 0x80000000;
+ int i;
+
+ dev_dbg(&cafe->pdev->dev, "cmdfunc %02x, 0x%x, 0x%x\n",
+ command, column, page_addr);
+
+ if (command == NAND_CMD_ERASE2 || command == NAND_CMD_PAGEPROG) {
+ /* Second half of a command we already calculated */
+ writel(cafe->ctl2 | 0x100 | command, cafe->mmio + 0x04);
+ ctl1 = cafe->ctl1;
+ dev_dbg(&cafe->pdev->dev, "Continue command, ctl1 %08x, #data %d\n",
+ cafe->ctl1, cafe->nr_data);
+ goto do_command;
+ }
+ /* Reset ECC engine */
+ writel(0, cafe->mmio + CAFE_NAND_CTRL2);
+
+ /* Emulate NAND_CMD_READOOB on large-page chips */
+ if (mtd->writesize > 512 &&
+ command == NAND_CMD_READOOB) {
+ column += mtd->writesize;
+ command = NAND_CMD_READ0;
+ }
+
+ /* FIXME: Do we need to send read command before sending data
+ for small-page chips, to position the buffer correctly? */
+
+ if (column != -1) {
+ writel(column, cafe->mmio + 0x1c);
+ adrbytes = 2;
+ if (page_addr != -1)
+ goto write_adr2;
+ } else if (page_addr != -1) {
+ writel(page_addr & 0xffff, cafe->mmio + 0x1c);
+ page_addr >>= 16;
+ write_adr2:
+ writel(page_addr, cafe->mmio+0x20);
+ adrbytes += 2;
+ if (mtd->size > mtd->writesize << 16)
+ adrbytes++;
+ }
+
+ cafe->data_pos = cafe->datalen = 0;
+
+ /* Set command valid bit */
+ ctl1 = 0x80000000 | command;
+
+ /* Set RD or WR bits as appropriate */
+ if (command == NAND_CMD_READID || command == NAND_CMD_STATUS) {
+ ctl1 |= (1<<26); /* rd */
+ /* Always 5 bytes, for now */
+ cafe->datalen = 5;
+ /* And one address cycle -- even for STATUS, since the controller doesn't work without */
+ adrbytes = 1;
+ } else if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 ||
+ command == NAND_CMD_READOOB || command == NAND_CMD_RNDOUT) {
+ ctl1 |= 1<<26; /* rd */
+ /* For now, assume just read to end of page */
+ cafe->datalen = mtd->writesize + mtd->oobsize - column;
+ } else if (command == NAND_CMD_SEQIN)
+ ctl1 |= 1<<25; /* wr */
+
+ /* Set number of address bytes */
+ if (adrbytes)
+ ctl1 |= ((adrbytes-1)|8) << 27;
+
+ if (command == NAND_CMD_SEQIN || command == NAND_CMD_ERASE1) {
+ /* Ignore the first command of a pair; the hardware
+ deals with them both at once, later */
+ cafe->ctl1 = ctl1;
+ cafe->ctl2 = 0;
+ dev_dbg(&cafe->pdev->dev, "Setup for delayed command, ctl1 %08x, dlen %x\n",
+ cafe->ctl1, cafe->datalen);
+ return;
+ }
+ /* RNDOUT and READ0 commands need a following byte */
+ if (command == NAND_CMD_RNDOUT)
+ writel(cafe->ctl2 | 0x100 | NAND_CMD_RNDOUTSTART, cafe->mmio + CAFE_NAND_CTRL2);
+ else if (command == NAND_CMD_READ0 && mtd->writesize > 512)
+ writel(cafe->ctl2 | 0x100 | NAND_CMD_READSTART, cafe->mmio + CAFE_NAND_CTRL2);
+
+ do_command:
+ if (cafe->datalen == 2112)
+ cafe->datalen = 2062;
+ dev_dbg(&cafe->pdev->dev, "dlen %x, ctl1 %x, ctl2 %x\n",
+ cafe->datalen, ctl1, readl(cafe->mmio+CAFE_NAND_CTRL2));
+ /* NB: The datasheet lies -- we really should be subtracting 1 here */
+ writel(cafe->datalen, cafe->mmio + CAFE_NAND_DATA_LEN);
+ writel(0x90000000, cafe->mmio + 0x10);
+ if (usedma && (ctl1 & (3<<25))) {
+ uint32_t dmactl = 0xc0000000 + cafe->datalen;
+ /* If WR or RD bits set, set up DMA */
+ if (ctl1 & (1<<26)) {
+ /* It's a read */
+ dmactl |= (1<<29);
+ /* ... so it's done when the DMA is done, not just
+ the command. */
+ doneint = 0x10000000;
+ }
+ writel(dmactl, cafe->mmio + 0x40);
+ }
+#if 0
+ printk("DMA setup is %x, status %x, ctl1 %x\n", readl(cafe->mmio + 0x40), readl(cafe->mmio + 0x0c), readl(cafe->mmio));
+ printk("DMA setup is %x, status %x, ctl1 %x\n", readl(cafe->mmio + 0x40), readl(cafe->mmio + 0x0c), readl(cafe->mmio));
+#endif
+ cafe->datalen = 0;
+
+#if 0
+ printk("About to write command %08x\n", ctl1);
+ for (i=0; i< 0x5c; i+=4)
+ printk("Register %x: %08x\n", i, readl(cafe->mmio + i));
+#endif
+ writel(ctl1, cafe->mmio + CAFE_NAND_CTRL1);
+ /* Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine. */
+ ndelay(100);
+
+ if (1) {
+ int c = 50000;
+ uint32_t irqs;
+
+ while (c--) {
+ irqs = readl(cafe->mmio + 0x10);
+ if (irqs & doneint)
+ break;
+ udelay(1);
+ if (!(c & 1000))
+ dev_dbg(&cafe->pdev->dev, "Wait for ready, IRQ %x\n", irqs);
+ cpu_relax();
+ }
+ writel(doneint, cafe->mmio + 0x10);
+ dev_dbg(&cafe->pdev->dev, "Command %x completed after %d usec, irqs %x (%x)\n", command, 50000-c, irqs, readl(cafe->mmio + 0x10));
+ }
+
+
+ cafe->ctl2 &= ~(1<<8);
+ cafe->ctl2 &= ~(1<<30);
+
+ switch (command) {
+
+ case NAND_CMD_CACHEDPROG:
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_RNDIN:
+ case NAND_CMD_STATUS:
+ case NAND_CMD_DEPLETE1:
+ case NAND_CMD_RNDOUT:
+ case NAND_CMD_STATUS_ERROR:
+ case NAND_CMD_STATUS_ERROR0:
+ case NAND_CMD_STATUS_ERROR1:
+ case NAND_CMD_STATUS_ERROR2:
+ case NAND_CMD_STATUS_ERROR3:
+ writel(cafe->ctl2, cafe->mmio + CAFE_NAND_CTRL2);
+ return;
+ }
+ nand_wait_ready(mtd);
+ writel(cafe->ctl2, cafe->mmio + CAFE_NAND_CTRL2);
+}
+
+static void cafe_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ //struct cafe_priv *cafe = mtd->priv;
+ // dev_dbg(&cafe->pdev->dev, "select_chip %d\n", chipnr);
+}
+static int cafe_nand_interrupt(int irq, void *id, struct pt_regs *regs)
+{
+ struct mtd_info *mtd = id;
+ struct cafe_priv *cafe = mtd->priv;
+ uint32_t irqs = readl(cafe->mmio + 0x10);
+ writel(irqs & ~0x90000000, cafe->mmio + 0x10);
+ if (!irqs)
+ return IRQ_NONE;
+
+ dev_dbg(&cafe->pdev->dev, "irq, bits %x (%x)\n", irqs, readl(cafe->mmio + 0x10));
+ return IRQ_HANDLED;
+}
+
+static void cafe_nand_bug(struct mtd_info *mtd)
+{
+ BUG();
+}
+
+static int cafe_nand_write_oob(struct mtd_info *mtd,
+ struct nand_chip *chip, int page)
+{
+ int status = 0;
+
+ WARN_ON(chip->oob_poi != chip->buffers->oobwbuf);
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+/* Don't use -- use nand_read_oob_std for now */
+static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd)
+{
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 1;
+}
+/**
+ * cafe_nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ *
+ * The hw generator calculates the error syndrome automatically. Therefor
+ * we need a special oob layout and handling.
+ */
+static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ WARN_ON(chip->oob_poi != chip->buffers->oobrbuf);
+
+ dev_dbg(&cafe->pdev->dev, "ECC result %08x SYN1,2 %08x\n", readl(cafe->mmio + 0x3c), readl(cafe->mmio + 0x50));
+
+ chip->read_buf(mtd, buf, mtd->writesize);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+static char foo[14];
+static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ WARN_ON(chip->oob_poi != chip->buffers->oobwbuf);
+
+ chip->write_buf(mtd, buf, mtd->writesize);
+ chip->write_buf(mtd, foo, 14);
+ // chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /* Set up ECC autogeneration */
+ cafe->ctl2 |= (1<<27) | (1<<30);
+ if (mtd->writesize == 2048)
+ cafe->ctl2 |= (1<<29);
+}
+
+static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int page, int cached, int raw)
+{
+ int status;
+
+ WARN_ON(chip->oob_poi != chip->buffers->oobwbuf);
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+
+ if (unlikely(raw))
+ chip->ecc.write_page_raw(mtd, chip, buf);
+ else
+ chip->ecc.write_page(mtd, chip, buf);
+
+ /*
+ * Cached progamming disabled for now, Not sure if its worth the
+ * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s)
+ */
+ cached = 0;
+
+ if (!cached || !(chip->options & NAND_CACHEPRG)) {
+
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+ /*
+ * See if operation failed and additional status checks are
+ * available
+ */
+ if ((status & NAND_STATUS_FAIL) && (chip->errstat))
+ status = chip->errstat(mtd, chip, FL_WRITING, status,
+ page);
+
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+ } else {
+ chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+ }
+
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+ /* Send command to read back the data */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ if (chip->verify_buf(mtd, buf, mtd->writesize))
+ return -EIO;
+#endif
+ return 0;
+}
+
+
+static int __devinit cafe_nand_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct mtd_info *mtd;
+ struct cafe_priv *cafe;
+ uint32_t ctrl;
+ int err = 0;
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+
+ pci_set_master(pdev);
+
+ mtd = kzalloc(sizeof(*mtd) + sizeof(struct cafe_priv), GFP_KERNEL);
+ if (!mtd) {
+ dev_warn(&pdev->dev, "failed to alloc mtd_info\n");
+ return -ENOMEM;
+ }
+ cafe = (void *)(&mtd[1]);
+
+ mtd->priv = cafe;
+ mtd->owner = THIS_MODULE;
+
+ cafe->pdev = pdev;
+ cafe->mmio = pci_iomap(pdev, 0, 0);
+ if (!cafe->mmio) {
+ dev_warn(&pdev->dev, "failed to iomap\n");
+ err = -ENOMEM;
+ goto out_free_mtd;
+ }
+ cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev, 2112 + sizeof(struct nand_buffers),
+ &cafe->dmaaddr, GFP_KERNEL);
+ if (!cafe->dmabuf) {
+ err = -ENOMEM;
+ goto out_ior;
+ }
+ cafe->nand.buffers = (void *)cafe->dmabuf + 2112;
+
+ cafe->nand.cmdfunc = cafe_nand_cmdfunc;
+ cafe->nand.dev_ready = cafe_device_ready;
+ cafe->nand.read_byte = cafe_read_byte;
+ cafe->nand.read_buf = cafe_read_buf;
+ cafe->nand.write_buf = cafe_write_buf;
+ cafe->nand.select_chip = cafe_select_chip;
+
+ cafe->nand.chip_delay = 0;
+
+ /* Enable the following for a flash based bad block table */
+ cafe->nand.options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;
+
+ /* Timings from Marvell's test code (not verified or calculated by us) */
+ writel(0xffffffff, cafe->mmio + CAFE_NAND_IRQ_MASK);
+#if 1
+ writel(0x01010a0a, cafe->mmio + CAFE_NAND_TIMING1);
+ writel(0x24121212, cafe->mmio + CAFE_NAND_TIMING2);
+ writel(0x11000000, cafe->mmio + CAFE_NAND_TIMING3);
+#else
+ writel(0xffffffff, cafe->mmio + CAFE_NAND_TIMING1);
+ writel(0xffffffff, cafe->mmio + CAFE_NAND_TIMING2);
+ writel(0xffffffff, cafe->mmio + CAFE_NAND_TIMING3);
+#endif
+ writel(0xdfffffff, cafe->mmio + 0x14);
+ err = request_irq(pdev->irq, &cafe_nand_interrupt, SA_SHIRQ, "CAFE NAND", mtd);
+ if (err) {
+ dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
+
+ goto out_free_dma;
+ }
+#if 1
+ /* Disable master reset, enable NAND clock */
+ ctrl = readl(cafe->mmio + 0x3004);
+ ctrl &= 0xffffeff0;
+ ctrl |= 0x00007000;
+ writel(ctrl | 0x05, cafe->mmio + 0x3004);
+ writel(ctrl | 0x0a, cafe->mmio + 0x3004);
+ writel(0, cafe->mmio + 0x40);
+
+ writel(0x7006, cafe->mmio + 0x3004);
+ writel(0x700a, cafe->mmio + 0x3004);
+
+ /* Set up DMA address */
+ writel(cafe->dmaaddr & 0xffffffff, cafe->mmio + 0x44);
+ if (sizeof(cafe->dmaaddr) > 4)
+ writel((cafe->dmaaddr >> 16) >> 16, cafe->mmio + 0x48);
+ else
+ writel(0, cafe->mmio + 0x48);
+ dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n",
+ readl(cafe->mmio+0x44), cafe->dmabuf);
+
+ /* Enable NAND IRQ in global IRQ mask register */
+ writel(0x80000007, cafe->mmio + 0x300c);
+ dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n",
+ readl(cafe->mmio + 0x3004), readl(cafe->mmio + 0x300c));
+#endif
+#if 1
+ mtd->writesize=2048;
+ mtd->oobsize = 0x40;
+ memset(cafe->dmabuf, 0xa5, 2112);
+ cafe->nand.cmdfunc(mtd, NAND_CMD_READID, 0, -1);
+ cafe->nand.read_byte(mtd);
+ cafe->nand.read_byte(mtd);
+ cafe->nand.read_byte(mtd);
+ cafe->nand.read_byte(mtd);
+ cafe->nand.read_byte(mtd);
+#endif
+#if 0
+ cafe->nand.cmdfunc(mtd, NAND_CMD_READ0, 0, 0);
+ // nand_wait_ready(mtd);
+ cafe->nand.read_byte(mtd);
+ cafe->nand.read_byte(mtd);
+ cafe->nand.read_byte(mtd);
+ cafe->nand.read_byte(mtd);
+#endif
+#if 0
+ writel(0x84600070, cafe->mmio);
+ udelay(10);
+ dev_dbg(&cafe->pdev->dev, "Status %x\n", readl(cafe->mmio + 0x30));
+#endif
+ /* Scan to find existance of the device */
+ if (nand_scan_ident(mtd, 1)) {
+ err = -ENXIO;
+ goto out_irq;
+ }
+
+ cafe->ctl2 = 1<<27; /* Reed-Solomon ECC */
+ if (mtd->writesize == 2048)
+ cafe->ctl2 |= 1<<29; /* 2KiB page size */
+
+ /* Set up ECC according to the type of chip we found */
+ if (mtd->writesize == 512 || mtd->writesize == 2048) {
+ cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
+ cafe->nand.ecc.size = mtd->writesize;
+ cafe->nand.ecc.bytes = 14;
+ cafe->nand.ecc.hwctl = (void *)cafe_nand_bug;
+ cafe->nand.ecc.calculate = (void *)cafe_nand_bug;
+ cafe->nand.ecc.correct = (void *)cafe_nand_bug;
+ cafe->nand.write_page = cafe_nand_write_page;
+ cafe->nand.ecc.write_page = cafe_nand_write_page_lowlevel;
+ cafe->nand.ecc.write_oob = cafe_nand_write_oob;
+ cafe->nand.ecc.read_page = cafe_nand_read_page;
+ cafe->nand.ecc.read_oob = cafe_nand_read_oob;
+
+ } else {
+ printk(KERN_WARNING "Unexpected NAND flash writesize %d. Using software ECC\n",
+ mtd->writesize);
+ cafe->nand.ecc.mode = NAND_ECC_NONE;
+ }
+
+ err = nand_scan_tail(mtd);
+ if (err)
+ goto out_irq;
+
+
+ pci_set_drvdata(pdev, mtd);
+ add_mtd_device(mtd);
+ goto out;
+
+ out_irq:
+ /* Disable NAND IRQ in global IRQ mask register */
+ writel(~1 & readl(cafe->mmio + 0x300c), cafe->mmio + 0x300c);
+ free_irq(pdev->irq, mtd);
+ out_free_dma:
+ dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
+ out_ior:
+ pci_iounmap(pdev, cafe->mmio);
+ out_free_mtd:
+ kfree(mtd);
+ out:
+ return err;
+}
+
+static void __devexit cafe_nand_remove(struct pci_dev *pdev)
+{
+ struct mtd_info *mtd = pci_get_drvdata(pdev);
+ struct cafe_priv *cafe = mtd->priv;
+
+ del_mtd_device(mtd);
+ /* Disable NAND IRQ in global IRQ mask register */
+ writel(~1 & readl(cafe->mmio + 0x300c), cafe->mmio + 0x300c);
+ free_irq(pdev->irq, mtd);
+ nand_release(mtd);
+ pci_iounmap(pdev, cafe->mmio);
+ dma_free_coherent(&cafe->pdev->dev, 2112, cafe->dmabuf, cafe->dmaaddr);
+ kfree(mtd);
+}
+
+static struct pci_device_id cafe_nand_tbl[] = {
+ { 0x11ab, 0x4100, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MEMORY_FLASH << 8, 0xFFFF0 }
+};
+
+MODULE_DEVICE_TABLE(pci, cafe_nand_tbl);
+
+static struct pci_driver cafe_nand_pci_driver = {
+ .name = "CAFÉ NAND",
+ .id_table = cafe_nand_tbl,
+ .probe = cafe_nand_probe,
+ .remove = __devexit_p(cafe_nand_remove),
+#ifdef CONFIG_PMx
+ .suspend = cafe_nand_suspend,
+ .resume = cafe_nand_resume,
+#endif
+};
+
+static int cafe_nand_init(void)
+{
+ return pci_register_driver(&cafe_nand_pci_driver);
+}
+
+static void cafe_nand_exit(void)
+{
+ pci_unregister_driver(&cafe_nand_pci_driver);
+}
+module_init(cafe_nand_init);
+module_exit(cafe_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("NAND flash driver for OLPC CAFE chip");
+
+/* Correct ECC for 2048 bytes of 0xff:
+ 41 a0 71 65 54 27 f3 93 ec a9 be ed 0b a1 */
projects / linux-2.6 / commitdiff