--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/clock.c
+ *
+ * Copyright (C) 2005 Texas Instruments Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Created for OMAP2.
+ *
+ * Cleaned up and modified to use omap shared clock framework by
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <asm/bitops.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+#include <asm/arch/cpu.h>
+#include <asm/div64.h>
+
+#include "memory.h"
+#include "sdrc.h"
+#include "clock.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
+
+#define MAX_CLOCK_ENABLE_WAIT 100000
+
+u8 cpu_mask;
+
+/*-------------------------------------------------------------------------
+ * Omap2 specific clock functions
+ *-------------------------------------------------------------------------*/
+
+/**
+ * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
+ * @clk: OMAP clock struct ptr to use
+ *
+ * Given a pointer to a source-selectable struct clk, read the hardware
+ * register and determine what its parent is currently set to. Update the
+ * clk->parent field with the appropriate clk ptr.
+ */
+void omap2_init_clksel_parent(struct clk *clk)
+{
+ const struct clksel *clks;
+ const struct clksel_rate *clkr;
+ u32 r, found = 0;
+
+ if (!clk->clksel)
+ return;
+
+ r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+ r >>= __ffs(clk->clksel_mask);
+
+ for (clks = clk->clksel; clks->parent && !found; clks++) {
+ for (clkr = clks->rates; clkr->div && !found; clkr++) {
+ if ((clkr->flags & cpu_mask) && (clkr->val == r)) {
+ if (clk->parent != clks->parent) {
+ pr_debug("clock: inited %s parent "
+ "to %s (was %s)\n",
+ clk->name, clks->parent->name,
+ ((clk->parent) ?
+ clk->parent->name : "NULL"));
+ clk->parent = clks->parent;
+ };
+ found = 1;
+ }
+ }
+ }
+
+ if (!found)
+ printk(KERN_ERR "clock: init parent: could not find "
+ "regval %0x for clock %s\n", r, clk->name);
+
+ return;
+}
+
+/* Returns the DPLL rate */
+u32 omap2_get_dpll_rate(struct clk *clk)
+{
+ long long dpll_clk;
+ u32 dpll_mult, dpll_div, dpll;
+ const struct dpll_data *dd;
+
+ dd = clk->dpll_data;
+ /* REVISIT: What do we return on error? */
+ if (!dd)
+ return 0;
+
+ dpll = __raw_readl(dd->mult_div1_reg);
+ dpll_mult = dpll & dd->mult_mask;
+ dpll_mult >>= __ffs(dd->mult_mask);
+ dpll_div = dpll & dd->div1_mask;
+ dpll_div >>= __ffs(dd->div1_mask);
+
+ dpll_clk = (long long)clk->parent->rate * dpll_mult;
+ do_div(dpll_clk, dpll_div + 1);
+
+ /* 34XX only */
+ if (dd->div2_reg) {
+ dpll = __raw_readl(dd->div2_reg);
+ dpll_div = dpll & dd->div2_mask;
+ dpll_div >>= __fss(dd->div2_mask);
+ do_div(dpll_clk, dpll_div + 1);
+ }
+
+ return dpll_clk;
+}
+
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+void omap2_fixed_divisor_recalc(struct clk *clk)
+{
+ WARN_ON(!clk->fixed_div);
+
+ clk->rate = clk->parent->rate / clk->fixed_div;
+
+ if (clk->flags & RATE_PROPAGATES)
+ propagate_rate(clk);
+}
+
+/**
+ * omap2_wait_clock_ready - wait for clock to enable
+ * @reg: physical address of clock IDLEST register
+ * @mask: value to mask against to determine if the clock is active
+ * @name: name of the clock (for printk)
+ *
+ * Returns 1 if the clock enabled in time, or 0 if it failed to enable
+ * in roughly MAX_CLOCK_ENABLE_WAIT microseconds.
+ */
+int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
+{
+ int i = 0;
+ int ena = 0;
+
+ /*
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ */
+ if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) {
+ ena = mask;
+ } else if (cpu_mask & RATE_IN_343X) {
+ ena = 0;
+ }
+
+ /* Wait for lock */
+ while (((__raw_readl(reg) & mask) != ena) &&
+ (i++ < MAX_CLOCK_ENABLE_WAIT)) {
+ udelay(1);
+ }
+
+ if (i < MAX_CLOCK_ENABLE_WAIT)
+ pr_debug("Clock %s stable after %d loops\n", name, i);
+ else
+ printk(KERN_ERR "Clock %s didn't enable in %d tries\n",
+ name, MAX_CLOCK_ENABLE_WAIT);
+
+
+ return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0;
+};
+
+
+/*
+ * Note: We don't need special code here for INVERT_ENABLE
+ * for the time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
+ */
+static void omap2_clk_wait_ready(struct clk *clk)
+{
+ void __iomem *reg, *other_reg, *st_reg;
+ u32 bit;
+
+ /*
+ * REVISIT: This code is pretty ugly. It would be nice to generalize
+ * it and pull it into struct clk itself somehow.
+ */
+ reg = clk->enable_reg;
+ if ((((u32)reg & 0xff) >= CM_FCLKEN1) &&
+ (((u32)reg & 0xff) <= OMAP24XX_CM_FCLKEN2))
+ other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x10); /* CM_ICLKEN* */
+ else if ((((u32)reg & 0xff) >= CM_ICLKEN1) &&
+ (((u32)reg & 0xff) <= OMAP24XX_CM_ICLKEN4))
+ other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x00); /* CM_FCLKEN* */
+ else
+ return;
+
+ /* REVISIT: What are the appropriate exclusions for 34XX? */
+ /* No check for DSS or cam clocks */
+ if (cpu_is_omap24xx() && ((u32)reg & 0x0f) == 0) { /* CM_{F,I}CLKEN1 */
+ if (clk->enable_bit == OMAP24XX_EN_DSS2_SHIFT ||
+ clk->enable_bit == OMAP24XX_EN_DSS1_SHIFT ||
+ clk->enable_bit == OMAP24XX_EN_CAM_SHIFT)
+ return;
+ }
+
+ /* REVISIT: What are the appropriate exclusions for 34XX? */
+ /* OMAP3: ignore DSS-mod clocks */
+ if (cpu_is_omap34xx() &&
+ (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0)))
+ return;
+
+ /* Check if both functional and interface clocks
+ * are running. */
+ bit = 1 << clk->enable_bit;
+ if (!(__raw_readl(other_reg) & bit))
+ return;
+ st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */
+
+ omap2_wait_clock_ready(st_reg, bit, clk->name);
+}
+
+/* Enables clock without considering parent dependencies or use count
+ * REVISIT: Maybe change this to use clk->enable like on omap1?
+ */
+int _omap2_clk_enable(struct clk *clk)
+{
+ u32 regval32;
+
+ if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
+ return 0;
+
+ if (clk->enable)
+ return clk->enable(clk);
+
+ if (unlikely(clk->enable_reg == 0)) {
+ printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+ clk->name);
+ return 0; /* REVISIT: -EINVAL */
+ }
+
+ regval32 = __raw_readl(clk->enable_reg);
+ if (clk->flags & INVERT_ENABLE)
+ regval32 &= ~(1 << clk->enable_bit);
+ else
+ regval32 |= (1 << clk->enable_bit);
+ __raw_writel(regval32, clk->enable_reg);
+ wmb();
+
+ omap2_clk_wait_ready(clk);
+
+ return 0;
+}
+
+/* Disables clock without considering parent dependencies or use count */
+void _omap2_clk_disable(struct clk *clk)
+{
+ u32 regval32;
+
+ if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
+ return;
+
+ if (clk->disable) {
+ clk->disable(clk);
+ return;
+ }
+
+ if (clk->enable_reg == 0) {
+ /*
+ * 'Independent' here refers to a clock which is not
+ * controlled by its parent.
+ */
+ printk(KERN_ERR "clock: clk_disable called on independent "
+ "clock %s which has no enable_reg\n", clk->name);
+ return;
+ }
+
+ regval32 = __raw_readl(clk->enable_reg);
+ if (clk->flags & INVERT_ENABLE)
+ regval32 |= (1 << clk->enable_bit);
+ else
+ regval32 &= ~(1 << clk->enable_bit);
+ __raw_writel(regval32, clk->enable_reg);
+ wmb();
+}
+
+void omap2_clk_disable(struct clk *clk)
+{
+ if (clk->usecount > 0 && !(--clk->usecount)) {
+ _omap2_clk_disable(clk);
+ if (likely((u32)clk->parent))
+ omap2_clk_disable(clk->parent);
+ }
+}
+
+int omap2_clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ if (clk->usecount++ == 0) {
+ if (likely((u32)clk->parent))
+ ret = omap2_clk_enable(clk->parent);
+
+ if (unlikely(ret != 0)) {
+ clk->usecount--;
+ return ret;
+ }
+
+ ret = _omap2_clk_enable(clk);
+
+ if (unlikely(ret != 0) && clk->parent) {
+ omap2_clk_disable(clk->parent);
+ clk->usecount--;
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * Used for clocks that are part of CLKSEL_xyz governed clocks.
+ * REVISIT: Maybe change to use clk->enable() functions like on omap1?
+ */
+void omap2_clksel_recalc(struct clk *clk)
+{
+ u32 div = 0;
+
+ pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
+
+ div = omap2_clksel_get_divisor(clk);
+ if (div == 0)
+ return;
+
+ if (unlikely(clk->rate == clk->parent->rate / div))
+ return;
+ clk->rate = clk->parent->rate / div;
+
+ pr_debug("clock: new clock rate is %ld (div %d)\n", clk->rate, div);
+
+ if (unlikely(clk->flags & RATE_PROPAGATES))
+ propagate_rate(clk);
+}
+
+/**
+ * omap2_get_clksel_by_parent - return clksel struct for a given clk & parent
+ * @clk: OMAP struct clk ptr to inspect
+ * @src_clk: OMAP struct clk ptr of the parent clk to search for
+ *
+ * Scan the struct clksel array associated with the clock to find
+ * the element associated with the supplied parent clock address.
+ * Returns a pointer to the struct clksel on success or NULL on error.
+ */
+const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
+ struct clk *src_clk)
+{
+ const struct clksel *clks;
+
+ if (!clk->clksel)
+ return NULL;
+
+ for (clks = clk->clksel; clks->parent; clks++) {
+ if (clks->parent == src_clk)
+ break; /* Found the requested parent */
+ }
+
+ if (!clks->parent) {
+ printk(KERN_ERR "clock: Could not find parent clock %s in "
+ "clksel array of clock %s\n", src_clk->name,
+ clk->name);
+ return NULL;
+ }
+
+ return clks;
+}
+
+/**
+ * omap2_clksel_round_rate_div - find divisor for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ * @new_div: ptr to where we should store the divisor
+ *
+ * Finds 'best' divider value in an array based on the source and target
+ * rates. The divider array must be sorted with smallest divider first.
+ * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
+ * they are only settable as part of virtual_prcm set.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
+ */
+u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
+ u32 *new_div)
+{
+ unsigned long test_rate;
+ const struct clksel *clks;
+ const struct clksel_rate *clkr;
+ u32 last_div = 0;
+
+ printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n",
+ clk->name, target_rate);
+
+ *new_div = 1;
+
+ clks = omap2_get_clksel_by_parent(clk, clk->parent);
+ if (clks == NULL)
+ return ~0;
+
+ for (clkr = clks->rates; clkr->div; clkr++) {
+ if (!(clkr->flags & cpu_mask))
+ continue;
+
+ /* Sanity check */
+ if (clkr->div <= last_div)
+ printk(KERN_ERR "clock: clksel_rate table not sorted "
+ "for clock %s", clk->name);
+
+ last_div = clkr->div;
+
+ test_rate = clk->parent->rate / clkr->div;
+
+ if (test_rate <= target_rate)
+ break; /* found it */
+ }
+
+ if (!clkr->div) {
+ printk(KERN_ERR "clock: Could not find divisor for target "
+ "rate %ld for clock %s parent %s\n", target_rate,
+ clk->name, clk->parent->name);
+ return ~0;
+ }
+
+ *new_div = clkr->div;
+
+ printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div,
+ (clk->parent->rate / clkr->div));
+
+ return (clk->parent->rate / clkr->div);
+}
+
+/**
+ * omap2_clksel_round_rate - find rounded rate for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ *
+ * Compatibility wrapper for OMAP clock framework
+ * Finds best target rate based on the source clock and possible dividers.
+ * rates. The divider array must be sorted with smallest divider first.
+ * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
+ * they are only settable as part of virtual_prcm set.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
+ */
+long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
+{
+ u32 new_div;
+
+ return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
+}
+
+
+/* Given a clock and a rate apply a clock specific rounding function */
+long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (clk->round_rate != 0)
+ return clk->round_rate(clk, rate);
+
+ if (clk->flags & RATE_FIXED)
+ printk(KERN_ERR "clock: generic omap2_clk_round_rate called "
+ "on fixed-rate clock %s\n", clk->name);
+
+ return clk->rate;
+}
+
+/**
+ * omap2_clksel_to_divisor() - turn clksel field value into integer divider
+ * @clk: OMAP struct clk to use
+ * @field_val: register field value to find
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a register field
+ * value to search for, find the corresponding clock divisor. The register
+ * field value should be pre-masked and shifted down so the LSB is at bit 0
+ * before calling. Returns 0 on error
+ */
+u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
+{
+ const struct clksel *clks;
+ const struct clksel_rate *clkr;
+
+ clks = omap2_get_clksel_by_parent(clk, clk->parent);
+ if (clks == NULL)
+ return 0;
+
+ for (clkr = clks->rates; clkr->div; clkr++) {
+ if ((clkr->flags & cpu_mask) && (clkr->val == field_val))
+ break;
+ }
+
+ if (!clkr->div) {
+ printk(KERN_ERR "clock: Could not find fieldval %d for "
+ "clock %s parent %s\n", field_val, clk->name,
+ clk->parent->name);
+ return 0;
+ }
+
+ return clkr->div;
+}
+
+/**
+ * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value
+ * @clk: OMAP struct clk to use
+ * @div: integer divisor to search for
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
+ * find the corresponding register field value. The return register value is
+ * the value before left-shifting. Returns 0xffffffff on error
+ */
+u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
+{
+ const struct clksel *clks;
+ const struct clksel_rate *clkr;
+
+ /* should never happen */
+ WARN_ON(div == 0);
+
+ clks = omap2_get_clksel_by_parent(clk, clk->parent);
+ if (clks == NULL)
+ return 0;
+
+ for (clkr = clks->rates; clkr->div; clkr++) {
+ if ((clkr->flags & cpu_mask) && (clkr->div == div))
+ break;
+ }
+
+ if (!clkr->div) {
+ printk(KERN_ERR "clock: Could not find divisor %d for "
+ "clock %s parent %s\n", div, clk->name,
+ clk->parent->name);
+ return 0;
+ }
+
+ return clkr->val;
+}
+
+/**
+ * omap2_get_clksel - find clksel register addr & field mask for a clk
+ * @clk: struct clk to use
+ * @field_mask: ptr to u32 to store the register field mask
+ *
+ * Returns the address of the clksel register upon success or NULL on error.
+ */
+void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
+{
+ if (unlikely((clk->clksel_reg == 0) || (clk->clksel_mask == 0)))
+ return NULL;
+
+ *field_mask = clk->clksel_mask;
+
+ return clk->clksel_reg;
+}
+
+/**
+ * omap2_clksel_get_divisor - get current divider applied to parent clock.
+ * @clk: OMAP struct clk to use.
+ *
+ * Returns the integer divisor upon success or 0 on error.
+ */
+u32 omap2_clksel_get_divisor(struct clk *clk)
+{
+ u32 field_mask, field_val;
+ void __iomem *div_addr;
+
+ div_addr = omap2_get_clksel(clk, &field_mask);
+ if (div_addr == 0)
+ return 0;
+
+ field_val = __raw_readl(div_addr) & field_mask;
+ field_val >>= __ffs(field_mask);
+
+ return omap2_clksel_to_divisor(clk, field_val);
+}
+
+int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 field_mask, field_val, reg_val, validrate, new_div = 0;
+ void __iomem *div_addr;
+
+ validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+ if (validrate != rate)
+ return -EINVAL;
+
+ div_addr = omap2_get_clksel(clk, &field_mask);
+ if (div_addr == 0)
+ return -EINVAL;
+
+ field_val = omap2_divisor_to_clksel(clk, new_div);
+ if (field_val == ~0)
+ return -EINVAL;
+
+ reg_val = __raw_readl(div_addr);
+ reg_val &= ~field_mask;
+ reg_val |= (field_val << __ffs(field_mask));
+ __raw_writel(reg_val, div_addr);
+ wmb();
+
+ clk->rate = clk->parent->rate / new_div;
+
+ if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
+ __raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
+ wmb();
+ }
+
+ return 0;
+}
+
+
+/* Set the clock rate for a clock source */
+int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret = -EINVAL;
+
+ pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate);
+
+ /* CONFIG_PARTICIPANT clocks are changed only in sets via the
+ rate table mechanism, driven by mpu_speed */
+ if (clk->flags & CONFIG_PARTICIPANT)
+ return -EINVAL;
+
+ /* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
+ if (clk->set_rate != 0)
+ ret = clk->set_rate(clk, rate);
+
+ if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
+ propagate_rate(clk);
+
+ return ret;
+}
+
+/*
+ * Converts encoded control register address into a full address
+ * On error, *src_addr will be returned as 0.
+ */
+static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
+ struct clk *src_clk, u32 *field_mask,
+ struct clk *clk, u32 *parent_div)
+{
+ const struct clksel *clks;
+ const struct clksel_rate *clkr;
+
+ *parent_div = 0;
+ *src_addr = 0;
+
+ clks = omap2_get_clksel_by_parent(clk, src_clk);
+ if (clks == NULL)
+ return 0;
+
+ for (clkr = clks->rates; clkr->div; clkr++) {
+ if (clkr->flags & (cpu_mask | DEFAULT_RATE))
+ break; /* Found the default rate for this platform */
+ }
+
+ if (!clkr->div) {
+ printk(KERN_ERR "clock: Could not find default rate for "
+ "clock %s parent %s\n", clk->name,
+ src_clk->parent->name);
+ return 0;
+ }
+
+ /* Should never happen. Add a clksel mask to the struct clk. */
+ WARN_ON(clk->clksel_mask == 0);
+
+ *field_mask = clk->clksel_mask;
+ *src_addr = clk->clksel_reg;
+ *parent_div = clkr->div;
+
+ return clkr->val;
+}
+
+int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
+{
+ void __iomem *src_addr;
+ u32 field_val, field_mask, reg_val, parent_div;
+
+ if (unlikely(clk->flags & CONFIG_PARTICIPANT))
+ return -EINVAL;
+
+ if (!clk->clksel)
+ return -EINVAL;
+
+ field_val = omap2_clksel_get_src_field(&src_addr, new_parent,
+ &field_mask, clk, &parent_div);
+ if (src_addr == 0)
+ return -EINVAL;
+
+ if (clk->usecount > 0)
+ _omap2_clk_disable(clk);
+
+ /* Set new source value (previous dividers if any in effect) */
+ reg_val = __raw_readl(src_addr) & ~field_mask;
+ reg_val |= (field_val << __ffs(field_mask));
+ __raw_writel(reg_val, src_addr);
+ wmb();
+
+ if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
+ __raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
+ wmb();
+ }
+
+ if (clk->usecount > 0)
+ _omap2_clk_enable(clk);
+
+ clk->parent = new_parent;
+
+ /* CLKSEL clocks follow their parents' rates, divided by a divisor */
+ clk->rate = new_parent->rate;
+
+ if (parent_div > 0)
+ clk->rate /= parent_div;
+
+ pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
+ clk->name, clk->parent->name, clk->rate);
+
+ if (unlikely(clk->flags & RATE_PROPAGATES))
+ propagate_rate(clk);
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------
+ * Omap2 clock reset and init functions
+ *-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+void omap2_clk_disable_unused(struct clk *clk)
+{
+ u32 regval32, v;
+
+ v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0;
+
+ regval32 = __raw_readl(clk->enable_reg);
+ if ((regval32 & (1 << clk->enable_bit)) == v)
+ return;
+
+ printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
+ _omap2_clk_disable(clk);
+}
+#endif
projects / linux-2.6 / commitdiff