config SCSI_QLA2XXX
- tristate
- default (SCSI && PCI)
- depends on SCSI && PCI
+ tristate "QLogic QLA2XXX Fibre Channel Support"
+ depends on PCI && SCSI
+ select SCSI_FC_ATTRS
+ select FW_LOADER
+ ---help---
+ This qla2xxx driver supports all QLogic Fibre Channel
+ PCI and PCIe host adapters.
-config SCSI_QLA21XX
- tristate "QLogic ISP2100 host adapter family support"
+ By default, firmware for the ISP parts will be loaded
+ via the Firmware Loader interface.
+
+ ISP Firmware Filename
+ ---------- -----------------
+ 21xx ql2100_fw.bin
+ 22xx ql2200_fw.bin
+ 2300, 2312 ql2300_fw.bin
+ 2322 ql2322_fw.bin
+ 6312, 6322 ql6312_fw.bin
+ 24xx ql2400_fw.bin
+
+ Upon request, the driver caches the firmware image until
+ the driver is unloaded.
+
+ NOTE: The original method of building firmware-loader
+ modules has been deprecated as the firmware-images will
+ be removed from the kernel sources.
+
+config SCSI_QLA2XXX_EMBEDDED_FIRMWARE
+ bool " Use firmware-loader modules (DEPRECATED)"
depends on SCSI_QLA2XXX
- select SCSI_FC_ATTRS
- select FW_LOADER
+
+config SCSI_QLA21XX
+ tristate " Build QLogic ISP2100 firmware-module"
+ depends on SCSI_QLA2XXX_EMBEDDED_FIRMWARE
---help---
This driver supports the QLogic 21xx (ISP2100) host adapter family.
config SCSI_QLA22XX
- tristate "QLogic ISP2200 host adapter family support"
- depends on SCSI_QLA2XXX
- select SCSI_FC_ATTRS
- select FW_LOADER
+ tristate " Build QLogic ISP2200 firmware-module"
+ depends on SCSI_QLA2XXX_EMBEDDED_FIRMWARE
---help---
This driver supports the QLogic 22xx (ISP2200) host adapter family.
config SCSI_QLA2300
- tristate "QLogic ISP2300 host adapter family support"
- depends on SCSI_QLA2XXX
- select SCSI_FC_ATTRS
- select FW_LOADER
+ tristate " Build QLogic ISP2300 firmware-module"
+ depends on SCSI_QLA2XXX_EMBEDDED_FIRMWARE
---help---
This driver supports the QLogic 2300 (ISP2300 and ISP2312) host
adapter family.
config SCSI_QLA2322
- tristate "QLogic ISP2322 host adapter family support"
- depends on SCSI_QLA2XXX
- select SCSI_FC_ATTRS
- select FW_LOADER
+ tristate " Build QLogic ISP2322 firmware-module"
+ depends on SCSI_QLA2XXX_EMBEDDED_FIRMWARE
---help---
This driver supports the QLogic 2322 (ISP2322) host adapter family.
config SCSI_QLA6312
- tristate "QLogic ISP63xx host adapter family support"
- depends on SCSI_QLA2XXX
- select SCSI_FC_ATTRS
- select FW_LOADER
+ tristate " Build QLogic ISP63xx firmware-module"
+ depends on SCSI_QLA2XXX_EMBEDDED_FIRMWARE
---help---
This driver supports the QLogic 63xx (ISP6312 and ISP6322) host
adapter family.
config SCSI_QLA24XX
- tristate "QLogic ISP24xx host adapter family support"
- depends on SCSI_QLA2XXX
- select SCSI_FC_ATTRS
- select FW_LOADER
+ tristate " Build QLogic ISP24xx firmware-module"
+ depends on SCSI_QLA2XXX_EMBEDDED_FIRMWARE
---help---
This driver supports the QLogic 24xx (ISP2422 and ISP2432) host
adapter family.
qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o \
qla_dbg.o qla_sup.o qla_rscn.o qla_attr.o
+obj-$(CONFIG_SCSI_QLA2XXX) += qla2xxx.o
+
qla2100-y := ql2100.o ql2100_fw.o
qla2200-y := ql2200.o ql2200_fw.o
qla2300-y := ql2300.o ql2300_fw.o
qla2x00_isp_name_show(struct class_device *cdev, char *buf)
{
scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
- return snprintf(buf, PAGE_SIZE, "%s\n", ha->brd_info->isp_name);
+ return snprintf(buf, PAGE_SIZE, "ISP%04X\n", ha->pdev->device);
}
static ssize_t
#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
+#include <linux/firmware.h>
#include <asm/semaphore.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
+#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
#if defined(CONFIG_SCSI_QLA21XX) || defined(CONFIG_SCSI_QLA21XX_MODULE)
#define IS_QLA2100(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2100)
#else
#define IS_QLA2522(ha) 0
#endif
+#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */
+
+#define IS_QLA2100(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2100)
+#define IS_QLA2200(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2200)
+#define IS_QLA2300(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2300)
+#define IS_QLA2312(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2312)
+#define IS_QLA2322(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2322)
+#define IS_QLA6312(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP6312)
+#define IS_QLA6322(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP6322)
+#define IS_QLA2422(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422)
+#define IS_QLA2432(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432)
+#define IS_QLA2512(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2512)
+#define IS_QLA2522(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2522)
+#endif
+
#define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \
IS_QLA6312(ha) || IS_QLA6322(ha))
-
#define IS_QLA24XX(ha) (IS_QLA2422(ha) || IS_QLA2432(ha))
#define IS_QLA25XX(ha) (IS_QLA2512(ha) || IS_QLA2522(ha))
struct scsi_host_template *sht;
};
+struct fw_blob {
+ char *name;
+ uint32_t segs[4];
+ const struct firmware *fw;
+};
+
/* Return data from MBC_GET_ID_LIST call. */
struct gid_list_info {
uint8_t al_pa;
extern void qla2x00_update_fw_options(struct scsi_qla_host *);
extern void qla24xx_update_fw_options(scsi_qla_host_t *);
extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
+extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *);
extern int qla24xx_load_risc_flash(scsi_qla_host_t *, uint32_t *);
-extern int qla24xx_load_risc_hotplug(scsi_qla_host_t *, uint32_t *);
extern fc_port_t *qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t);
extern int qla2x00_down_timeout(struct semaphore *, unsigned long);
+extern struct fw_blob *qla2x00_request_firmware(scsi_qla_host_t *);
+
/*
* Global Function Prototypes in qla_iocb.c source file.
*/
#include <linux/delay.h>
#include <linux/vmalloc.h>
-#include <linux/firmware.h>
#include <scsi/scsi_transport_fc.h>
#include "qla_devtbl.h"
return (rval);
}
+#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
+
int
qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
{
- int rval;
- uint16_t cnt;
- uint16_t *risc_code;
- unsigned long risc_address;
- unsigned long risc_code_size;
- int num;
- int i;
- uint16_t *req_ring;
+ int rval, num, i;
+ uint32_t cnt;
+ uint16_t *risc_code;
+ uint32_t risc_addr, risc_size;
+ uint16_t *req_ring;
struct qla_fw_info *fw_iter;
rval = QLA_SUCCESS;
*srisc_addr = *ha->brd_info->fw_info->fwstart;
while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) {
risc_code = fw_iter->fwcode;
- risc_code_size = *fw_iter->fwlen;
-
- if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
- risc_address = *fw_iter->fwstart;
- } else {
- /* Extended address */
- risc_address = *fw_iter->lfwstart;
- }
+ risc_size = *fw_iter->fwlen;
+ if (fw_iter->addressing == FW_INFO_ADDR_NORMAL)
+ risc_addr = *fw_iter->fwstart;
+ else
+ risc_addr = *fw_iter->lfwstart;
num = 0;
rval = 0;
- while (risc_code_size > 0 && !rval) {
+ while (risc_size > 0 && !rval) {
cnt = (uint16_t)(ha->fw_transfer_size >> 1);
- if (cnt > risc_code_size)
- cnt = risc_code_size;
+ if (cnt > risc_size)
+ cnt = risc_size;
DEBUG7(printk("scsi(%ld): Loading risc segment@ "
"addr %p, number of bytes 0x%x, offset 0x%lx.\n",
- ha->host_no, risc_code, cnt, risc_address));
+ ha->host_no, risc_code, cnt, risc_addr));
req_ring = (uint16_t *)ha->request_ring;
for (i = 0; i < cnt; i++)
req_ring[i] = cpu_to_le16(risc_code[i]);
- if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
- rval = qla2x00_load_ram(ha, ha->request_dma,
- risc_address, cnt);
- } else {
- rval = qla2x00_load_ram_ext(ha,
- ha->request_dma, risc_address, cnt);
- }
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ cnt);
if (rval) {
DEBUG(printk("scsi(%ld): [ERROR] Failed to "
"load segment %d of firmware\n",
}
risc_code += cnt;
- risc_address += cnt;
- risc_code_size -= cnt;
+ risc_addr += cnt;
+ risc_size -= cnt;
num++;
}
/* Next firmware sequence */
fw_iter++;
}
-
- return (rval);
+ return rval;
}
int
return rval;
}
+#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */
+
int
-qla24xx_load_risc_hotplug(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval;
+ int i, fragment;
+ uint16_t *wcode, *fwcode;
+ uint32_t risc_addr, risc_size, fwclen, wlen, *seg;
+ struct fw_blob *blob;
+
+ /* Load firmware blob. */
+ blob = qla2x00_request_firmware(ha);
+ if (!blob) {
+ qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
+ return QLA_FUNCTION_FAILED;
+ }
+
+ rval = QLA_SUCCESS;
+
+ wcode = (uint16_t *)ha->request_ring;
+ *srisc_addr = 0;
+ fwcode = (uint16_t *)blob->fw->data;
+ fwclen = 0;
+
+ /* Validate firmware image by checking version. */
+ if (blob->fw->size < 8 * sizeof(uint16_t)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image (%Zd)!\n",
+ blob->fw->size);
+ goto fail_fw_integrity;
+ }
+ for (i = 0; i < 4; i++)
+ wcode[i] = be16_to_cpu(fwcode[i + 4]);
+ if ((wcode[0] == 0xffff && wcode[1] == 0xffff && wcode[2] == 0xffff &&
+ wcode[3] == 0xffff) || (wcode[0] == 0 && wcode[1] == 0 &&
+ wcode[2] == 0 && wcode[3] == 0)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image!\n");
+ qla_printk(KERN_WARNING, ha,
+ "Firmware data: %04x %04x %04x %04x!\n", wcode[0],
+ wcode[1], wcode[2], wcode[3]);
+ goto fail_fw_integrity;
+ }
+
+ seg = blob->segs;
+ while (*seg && rval == QLA_SUCCESS) {
+ risc_addr = *seg;
+ *srisc_addr = *srisc_addr == 0 ? *seg : *srisc_addr;
+ risc_size = be16_to_cpu(fwcode[3]);
+
+ /* Validate firmware image size. */
+ fwclen += risc_size * sizeof(uint16_t);
+ if (blob->fw->size < fwclen) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of firmware image "
+ "(%Zd)!\n", blob->fw->size);
+ goto fail_fw_integrity;
+ }
+
+ fragment = 0;
+ while (risc_size > 0 && rval == QLA_SUCCESS) {
+ wlen = (uint16_t)(ha->fw_transfer_size >> 1);
+ if (wlen > risc_size)
+ wlen = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
+ "addr %x, number of words 0x%x.\n", ha->host_no,
+ risc_addr, wlen));
+
+ for (i = 0; i < wlen; i++)
+ wcode[i] = swab16(fwcode[i]);
+
+ rval = qla2x00_load_ram(ha, ha->request_dma, risc_addr,
+ wlen);
+ if (rval) {
+ DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
+ "segment %d of firmware\n", ha->host_no,
+ fragment));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", fragment);
+ break;
+ }
+
+ fwcode += wlen;
+ risc_addr += wlen;
+ risc_size -= wlen;
+ fragment++;
+ }
+
+ /* Next segment. */
+ seg++;
+ }
+ return rval;
+
+fail_fw_integrity:
+ return QLA_FUNCTION_FAILED;
+}
+
+int
+qla24xx_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
{
int rval;
int segments, fragment;
uint32_t risc_addr;
uint32_t risc_size;
uint32_t i;
- const struct firmware *fw_entry;
+ struct fw_blob *blob;
uint32_t *fwcode, fwclen;
- if (request_firmware(&fw_entry, ha->brd_info->fw_fname,
- &ha->pdev->dev)) {
- qla_printk(KERN_ERR, ha,
- "Firmware image file not available: '%s'\n",
- ha->brd_info->fw_fname);
+ /* Load firmware blob. */
+ blob = qla2x00_request_firmware(ha);
+ if (!blob) {
+ qla_printk(KERN_ERR, ha, "Firmware image unavailable.\n");
return QLA_FUNCTION_FAILED;
}
segments = FA_RISC_CODE_SEGMENTS;
dcode = (uint32_t *)ha->request_ring;
*srisc_addr = 0;
- fwcode = (uint32_t *)fw_entry->data;
+ fwcode = (uint32_t *)blob->fw->data;
fwclen = 0;
/* Validate firmware image by checking version. */
- if (fw_entry->size < 8 * sizeof(uint32_t)) {
+ if (blob->fw->size < 8 * sizeof(uint32_t)) {
qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of flash firmware image "
- "(%Zd)!\n", fw_entry->size);
+ "Unable to verify integrity of firmware image (%Zd)!\n",
+ blob->fw->size);
goto fail_fw_integrity;
}
for (i = 0; i < 4; i++)
(dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
dcode[3] == 0)) {
qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of flash firmware image!\n");
+ "Unable to verify integrity of firmware image!\n");
qla_printk(KERN_WARNING, ha,
"Firmware data: %08x %08x %08x %08x!\n", dcode[0],
dcode[1], dcode[2], dcode[3]);
/* Validate firmware image size. */
fwclen += risc_size * sizeof(uint32_t);
- if (fw_entry->size < fwclen) {
+ if (blob->fw->size < fwclen) {
qla_printk(KERN_WARNING, ha,
- "Unable to verify integrity of flash firmware "
- "image (%Zd)!\n", fw_entry->size);
+ "Unable to verify integrity of firmware image "
+ "(%Zd)!\n", blob->fw->size);
+
goto fail_fw_integrity;
}
/* Next segment. */
segments--;
}
-
- release_firmware(fw_entry);
return rval;
fail_fw_integrity:
-
- release_firmware(fw_entry);
return QLA_FUNCTION_FAILED;
-
}
+#endif
MODULE_PARM_DESC(ql2xloginretrycount,
"Specify an alternate value for the NVRAM login retry count.");
-int ql2xfwloadbin=1;
-module_param(ql2xfwloadbin, int, S_IRUGO|S_IRUSR);
-MODULE_PARM_DESC(ql2xfwloadbin,
- "Load ISP2xxx firmware image via hotplug.");
-
static void qla2x00_free_device(scsi_qla_host_t *);
static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
char pci_info[20];
char fw_str[30];
fc_port_t *fcport;
+ struct scsi_host_template *sht;
if (pci_enable_device(pdev))
goto probe_out;
- host = scsi_host_alloc(brd_info->sht ? brd_info->sht:
- &qla2x00_driver_template, sizeof(scsi_qla_host_t));
+ sht = &qla2x00_driver_template;
+ if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
+ pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432)
+ sht = &qla24xx_driver_template;
+ host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
if (host == NULL) {
printk(KERN_WARNING
"qla2xxx: Couldn't allocate host from scsi layer!\n");
goto probe_failed;
qla_printk(KERN_INFO, ha,
- "Found an %s, irq %d, iobase 0x%p\n", ha->brd_info->isp_name,
- pdev->irq, ha->iobase);
+ "Found an ISP%04X, irq %d, iobase 0x%p\n", pdev->device, pdev->irq,
+ ha->iobase);
spin_lock_init(&ha->hardware_lock);
ha->isp_ops.reset_adapter = qla24xx_reset_adapter;
ha->isp_ops.nvram_config = qla24xx_nvram_config;
ha->isp_ops.update_fw_options = qla24xx_update_fw_options;
+#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
ha->isp_ops.load_risc = qla24xx_load_risc_flash;
- if (ql2xfwloadbin)
- ha->isp_ops.load_risc = qla24xx_load_risc_hotplug;
+#else
+ ha->isp_ops.load_risc = qla24xx_load_risc;
+#endif
ha->isp_ops.pci_info_str = qla24xx_pci_info_str;
ha->isp_ops.fw_version_str = qla24xx_fw_version_str;
ha->isp_ops.intr_handler = qla24xx_intr_handler;
qla_printk(KERN_INFO, ha, "\n"
" QLogic Fibre Channel HBA Driver: %s\n"
" QLogic %s - %s\n"
- " %s: %s @ %s hdma%c, host#=%ld, fw=%s\n", qla2x00_version_str,
- ha->model_number, ha->model_desc ? ha->model_desc: "",
- ha->brd_info->isp_name, ha->isp_ops.pci_info_str(ha, pci_info),
- pci_name(pdev), ha->flags.enable_64bit_addressing ? '+': '-',
- ha->host_no, ha->isp_ops.fw_version_str(ha, fw_str));
+ " ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n",
+ qla2x00_version_str, ha->model_number,
+ ha->model_desc ? ha->model_desc: "", pdev->device,
+ ha->isp_ops.pci_info_str(ha, pci_info), pci_name(pdev),
+ ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no,
+ ha->isp_ops.fw_version_str(ha, fw_str));
/* Go with fc_rport registration. */
list_for_each_entry(fcport, &ha->fcports, list)
return -ETIMEDOUT;
}
+#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
+
+#define qla2x00_release_firmware() do { } while (0)
+
static struct qla_board_info qla_board_tbl[] = {
{
.drv_name = "qla2400",
qla2x00_remove_one(pdev);
}
+#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */
+
+/* Firmware interface routines. */
+
+#define FW_BLOBS 6
+#define FW_ISP21XX 0
+#define FW_ISP22XX 1
+#define FW_ISP2300 2
+#define FW_ISP2322 3
+#define FW_ISP63XX 4
+#define FW_ISP24XX 5
+
+static DECLARE_MUTEX(qla_fw_lock);
+
+static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
+ { .name = "ql2100_fw.bin", .segs = { 0x1000, 0 }, },
+ { .name = "ql2200_fw.bin", .segs = { 0x1000, 0 }, },
+ { .name = "ql2300_fw.bin", .segs = { 0x800, 0 }, },
+ { .name = "ql2322_fw.bin", .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
+ { .name = "ql6312_fw.bin", .segs = { 0x800, 0 }, },
+ { .name = "ql2400_fw.bin", },
+};
+
+struct fw_blob *
+qla2x00_request_firmware(scsi_qla_host_t *ha)
+{
+ struct fw_blob *blob;
+
+ blob = NULL;
+ if (IS_QLA2100(ha)) {
+ blob = &qla_fw_blobs[FW_ISP21XX];
+ } else if (IS_QLA2200(ha)) {
+ blob = &qla_fw_blobs[FW_ISP22XX];
+ } else if (IS_QLA2300(ha) || IS_QLA2312(ha)) {
+ blob = &qla_fw_blobs[FW_ISP2300];
+ } else if (IS_QLA2322(ha)) {
+ blob = &qla_fw_blobs[FW_ISP2322];
+ } else if (IS_QLA6312(ha) || IS_QLA6322(ha)) {
+ blob = &qla_fw_blobs[FW_ISP63XX];
+ } else if (IS_QLA24XX(ha)) {
+ blob = &qla_fw_blobs[FW_ISP24XX];
+ }
+
+ down(&qla_fw_lock);
+ if (blob->fw)
+ goto out;
+
+ if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) {
+ DEBUG2(printk("scsi(%ld): Failed to load firmware image "
+ "(%s).\n", ha->host_no, blob->name));
+ blob->fw = NULL;
+ blob = NULL;
+ goto out;
+ }
+
+out:
+ up(&qla_fw_lock);
+ return blob;
+}
+
+static void
+qla2x00_release_firmware(void)
+{
+ int idx;
+
+ down(&qla_fw_lock);
+ for (idx = 0; idx < FW_BLOBS; idx++)
+ if (qla_fw_blobs[idx].fw)
+ release_firmware(qla_fw_blobs[idx].fw);
+ up(&qla_fw_lock);
+}
+
+static struct qla_board_info qla_board_tbl = {
+ .drv_name = "qla2xxx",
+};
+
+static struct pci_device_id qla2xxx_pci_tbl[] = {
+ { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ { 0 },
+};
+MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
+
+static int __devinit
+qla2xxx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ return qla2x00_probe_one(pdev, &qla_board_tbl);
+}
+
+static void __devexit
+qla2xxx_remove_one(struct pci_dev *pdev)
+{
+ qla2x00_remove_one(pdev);
+}
+
+#endif
+
static struct pci_driver qla2xxx_pci_driver = {
.name = "qla2xxx",
+ .owner = THIS_MODULE,
.id_table = qla2xxx_pci_tbl,
.probe = qla2xxx_probe_one,
.remove = __devexit_p(qla2xxx_remove_one),
/* Derive version string. */
strcpy(qla2x00_version_str, QLA2XXX_VERSION);
+#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
+ strcat(qla2x00_version_str, "-fw");
+#endif
#if DEBUG_QLA2100
strcat(qla2x00_version_str, "-debug");
#endif
qla2x00_module_exit(void)
{
pci_unregister_driver(&qla2xxx_pci_driver);
+ qla2x00_release_firmware();
kmem_cache_destroy(srb_cachep);
fc_release_transport(qla2xxx_transport_template);
}
projects / linux-2.6 / commitdiff