#define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
struct myri10ge_rx_buffer_state {
- struct sk_buff *skb;
struct page *page;
int page_offset;
DECLARE_PCI_UNMAP_ADDR(bus)
MODULE_PARM_DESC(myri10ge_force_firmware,
"Force firmware to assume aligned completions\n");
-static int myri10ge_skb_cross_4k = 0;
-module_param(myri10ge_skb_cross_4k, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(myri10ge_skb_cross_4k,
- "Can a small skb cross a 4KB boundary?\n");
-
static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
module_param(myri10ge_initial_mtu, int, S_IRUGO);
MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU\n");
mb();
}
-/*
- * Set of routines to get a new receive buffer. Any buffer which
- * crosses a 4KB boundary must start on a 4KB boundary due to PCIe
- * wdma restrictions. We also try to align any smaller allocation to
- * at least a 16 byte boundary for efficiency. We assume the linux
- * memory allocator works by powers of 2, and will not return memory
- * smaller than 2KB which crosses a 4KB boundary. If it does, we fall
- * back to allocating 2x as much space as required.
- *
- * We intend to replace large (>4KB) skb allocations by using
- * pages directly and building a fraglist in the near future.
- */
-
-static inline struct sk_buff *myri10ge_alloc_big(struct net_device *dev,
- int bytes)
-{
- struct sk_buff *skb;
- unsigned long data, roundup;
-
- skb = netdev_alloc_skb(dev, bytes + 4096 + MXGEFW_PAD);
- if (skb == NULL)
- return NULL;
-
- /* Correct skb->truesize so that socket buffer
- * accounting is not confused the rounding we must
- * do to satisfy alignment constraints.
- */
- skb->truesize -= 4096;
-
- data = (unsigned long)(skb->data);
- roundup = (-data) & (4095);
- skb_reserve(skb, roundup);
- return skb;
-}
-
-/* Allocate 2x as much space as required and use whichever portion
- * does not cross a 4KB boundary */
-static inline struct sk_buff *myri10ge_alloc_small_safe(struct net_device *dev,
- unsigned int bytes)
-{
- struct sk_buff *skb;
- unsigned long data, boundary;
-
- skb = netdev_alloc_skb(dev, 2 * (bytes + MXGEFW_PAD) - 1);
- if (unlikely(skb == NULL))
- return NULL;
-
- /* Correct skb->truesize so that socket buffer
- * accounting is not confused the rounding we must
- * do to satisfy alignment constraints.
- */
- skb->truesize -= bytes + MXGEFW_PAD;
-
- data = (unsigned long)(skb->data);
- boundary = (data + 4095UL) & ~4095UL;
- if ((boundary - data) >= (bytes + MXGEFW_PAD))
- return skb;
-
- skb_reserve(skb, boundary - data);
- return skb;
-}
-
-/* Allocate just enough space, and verify that the allocated
- * space does not cross a 4KB boundary */
-static inline struct sk_buff *myri10ge_alloc_small(struct net_device *dev,
- int bytes)
-{
- struct sk_buff *skb;
- unsigned long roundup, data, end;
-
- skb = netdev_alloc_skb(dev, bytes + 16 + MXGEFW_PAD);
- if (unlikely(skb == NULL))
- return NULL;
-
- /* Round allocated buffer to 16 byte boundary */
- data = (unsigned long)(skb->data);
- roundup = (-data) & 15UL;
- skb_reserve(skb, roundup);
- /* Verify that the data buffer does not cross a page boundary */
- data = (unsigned long)(skb->data);
- end = data + bytes + MXGEFW_PAD - 1;
- if (unlikely(((end >> 12) != (data >> 12)) && (data & 4095UL))) {
- printk(KERN_NOTICE
- "myri10ge_alloc_small: small skb crossed 4KB boundary\n");
- myri10ge_skb_cross_4k = 1;
- dev_kfree_skb_any(skb);
- skb = myri10ge_alloc_small_safe(dev, bytes);
- }
- return skb;
-}
-
-static inline int
-myri10ge_getbuf(struct myri10ge_rx_buf *rx, struct myri10ge_priv *mgp,
- int bytes, int idx)
-{
- struct net_device *dev = mgp->dev;
- struct pci_dev *pdev = mgp->pdev;
- struct sk_buff *skb;
- dma_addr_t bus;
- int len, retval = 0;
-
- bytes += VLAN_HLEN; /* account for 802.1q vlan tag */
-
- if ((bytes + MXGEFW_PAD) > (4096 - 16) /* linux overhead */ )
- skb = myri10ge_alloc_big(dev, bytes);
- else if (myri10ge_skb_cross_4k)
- skb = myri10ge_alloc_small_safe(dev, bytes);
- else
- skb = myri10ge_alloc_small(dev, bytes);
-
- if (unlikely(skb == NULL)) {
- rx->alloc_fail++;
- retval = -ENOBUFS;
- goto done;
- }
-
- /* set len so that it only covers the area we
- * need mapped for DMA */
- len = bytes + MXGEFW_PAD;
-
- bus = pci_map_single(pdev, skb->data, len, PCI_DMA_FROMDEVICE);
- rx->info[idx].skb = skb;
- pci_unmap_addr_set(&rx->info[idx], bus, bus);
- pci_unmap_len_set(&rx->info[idx], len, len);
- rx->shadow[idx].addr_low = htonl(MYRI10GE_LOWPART_TO_U32(bus));
- rx->shadow[idx].addr_high = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
-
-done:
- /* copy 8 descriptors (64-bytes) to the mcp at a time */
- if ((idx & 7) == 7) {
- if (rx->wc_fifo == NULL)
- myri10ge_submit_8rx(&rx->lanai[idx - 7],
- &rx->shadow[idx - 7]);
- else {
- mb();
- myri10ge_pio_copy(rx->wc_fifo,
- &rx->shadow[idx - 7], 64);
- }
- }
- return retval;
-}
-
static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
{
struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
* page into an skb */
static inline int
-myri10ge_page_rx_done(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
- int bytes, int len, __wsum csum)
+myri10ge_rx_done(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
+ int bytes, int len, __wsum csum)
{
struct sk_buff *skb;
struct skb_frag_struct rx_frags[MYRI10GE_MAX_FRAGS_PER_FRAME];
return 1;
}
-static inline unsigned long
-myri10ge_rx_done(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
- int bytes, int len, __wsum csum)
-{
- dma_addr_t bus;
- struct sk_buff *skb;
- int idx, unmap_len;
-
- idx = rx->cnt & rx->mask;
- rx->cnt++;
-
- /* save a pointer to the received skb */
- skb = rx->info[idx].skb;
- bus = pci_unmap_addr(&rx->info[idx], bus);
- unmap_len = pci_unmap_len(&rx->info[idx], len);
-
- /* try to replace the received skb */
- if (myri10ge_getbuf(rx, mgp, bytes, idx)) {
- /* drop the frame -- the old skbuf is re-cycled */
- mgp->stats.rx_dropped += 1;
- return 0;
- }
-
- /* unmap the recvd skb */
- pci_unmap_single(mgp->pdev, bus, unmap_len, PCI_DMA_FROMDEVICE);
-
- /* mcp implicitly skips 1st bytes so that packet is properly
- * aligned */
- skb_reserve(skb, MXGEFW_PAD);
-
- /* set the length of the frame */
- skb_put(skb, len);
-
- skb->protocol = eth_type_trans(skb, mgp->dev);
- if (mgp->csum_flag) {
- if ((skb->protocol == htons(ETH_P_IP)) ||
- (skb->protocol == htons(ETH_P_IPV6))) {
- skb->csum = csum;
- skb->ip_summed = CHECKSUM_COMPLETE;
- } else
- myri10ge_vlan_ip_csum(skb, csum);
- }
-
- netif_receive_skb(skb);
- mgp->dev->last_rx = jiffies;
- return 1;
-}
-
static inline void myri10ge_tx_done(struct myri10ge_priv *mgp, int mcp_index)
{
struct pci_dev *pdev = mgp->pdev;
rx_done->entry[idx].length = 0;
checksum = csum_unfold(rx_done->entry[idx].checksum);
if (length <= mgp->small_bytes)
- rx_ok = myri10ge_page_rx_done(mgp, &mgp->rx_small,
- mgp->small_bytes,
- length, checksum);
+ rx_ok = myri10ge_rx_done(mgp, &mgp->rx_small,
+ mgp->small_bytes,
+ length, checksum);
else
- rx_ok = myri10ge_page_rx_done(mgp, &mgp->rx_big,
- mgp->big_bytes,
- length, checksum);
+ rx_ok = myri10ge_rx_done(mgp, &mgp->rx_big,
+ mgp->big_bytes,
+ length, checksum);
rx_packets += rx_ok;
rx_bytes += rx_ok * (unsigned long)length;
cnt++;
projects / linux-2.6 / commitdiff