]> err.no Git - linux-2.6/commitdiff
[ARM] 4461/1: MXC platform and i.MX31ADS core support
authorQuinn Jensen <qcjensen@gmail.com>
Mon, 9 Jul 2007 21:06:53 +0000 (22:06 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Sun, 22 Jul 2007 14:44:46 +0000 (15:44 +0100)
This patch adds the foundation pieces for
the Freescale MXC platforms, including
i.MX2 and i.MX3 based systems.

The bare-bones MX31 support in this patch
boots to the rootdev panic with 8250 serial
console configured "console=ttyS0,115200".
It assumes that Redboot is the boot loader.

Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
26 files changed:
arch/arm/Kconfig
arch/arm/Makefile
arch/arm/mach-mx3/Kconfig [new file with mode: 0644]
arch/arm/mach-mx3/Makefile [new file with mode: 0644]
arch/arm/mach-mx3/Makefile.boot [new file with mode: 0644]
arch/arm/mach-mx3/mm.c [new file with mode: 0644]
arch/arm/mach-mx3/mx31ads.c [new file with mode: 0644]
arch/arm/mach-mx3/time.c [new file with mode: 0644]
arch/arm/mm/Kconfig
arch/arm/plat-mxc/Kconfig [new file with mode: 0644]
arch/arm/plat-mxc/Makefile [new file with mode: 0644]
arch/arm/plat-mxc/irq.c [new file with mode: 0644]
include/asm-arm/arch-mxc/board-mx31ads.h [new file with mode: 0644]
include/asm-arm/arch-mxc/common.h [new file with mode: 0644]
include/asm-arm/arch-mxc/dma.h [new file with mode: 0644]
include/asm-arm/arch-mxc/entry-macro.S [new file with mode: 0644]
include/asm-arm/arch-mxc/hardware.h [new file with mode: 0644]
include/asm-arm/arch-mxc/io.h [new file with mode: 0644]
include/asm-arm/arch-mxc/irqs.h [new file with mode: 0644]
include/asm-arm/arch-mxc/memory.h [new file with mode: 0644]
include/asm-arm/arch-mxc/mx31.h [new file with mode: 0644]
include/asm-arm/arch-mxc/mxc.h [new file with mode: 0644]
include/asm-arm/arch-mxc/system.h [new file with mode: 0644]
include/asm-arm/arch-mxc/timex.h [new file with mode: 0644]
include/asm-arm/arch-mxc/uncompress.h [new file with mode: 0644]
include/asm-arm/arch-mxc/vmalloc.h [new file with mode: 0644]

index a44c6da9bf8363d21169eecb1521ef8f16144e7a..0658e5d851312d76c2247d228d69a81624068041 100644 (file)
@@ -324,6 +324,12 @@ config ARCH_NS9XXX
 
          <http://www.digi.com/products/microprocessors/index.jsp>
 
+config ARCH_MXC
+       bool "Freescale MXC/iMX-based"
+       select ARCH_MTD_XIP
+       help
+         Support for Freescale MXC/iMX-based family of processors
+
 config ARCH_PNX4008
        bool "Philips Nexperia PNX4008 Mobile"
        help
@@ -456,6 +462,8 @@ source "arch/arm/mach-realview/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
 
+source "arch/arm/plat-mxc/Kconfig"
+
 source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-ns9xxx/Kconfig"
index cbd5010d3bc3acb5b64dc99ad5ba380e2f97f409..fa4ea9ff0797b9ff94144b2b69bee97524dd09a0 100644 (file)
@@ -137,6 +137,8 @@ endif
  textofs-$(CONFIG_ARCH_NS9XXX)    := 0x00108000
  machine-$(CONFIG_ARCH_DAVINCI)           := davinci
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
+  incdir-$(CONFIG_ARCH_MXC)       := mxc
+ machine-$(CONFIG_ARCH_MX3)       := mx3
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
@@ -183,6 +185,7 @@ core-$(CONFIG_VFP)          += arch/arm/vfp/
 core-$(CONFIG_PLAT_IOP)                += arch/arm/plat-iop/
 core-$(CONFIG_ARCH_OMAP)       += arch/arm/plat-omap/
 core-$(CONFIG_PLAT_S3C24XX)            += arch/arm/plat-s3c24xx/
+core-$(CONFIG_ARCH_MXC)                += arch/arm/plat-mxc/
 
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 drivers-$(CONFIG_ARCH_CLPS7500)        += drivers/acorn/char/
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
new file mode 100644 (file)
index 0000000..5fe8606
--- /dev/null
@@ -0,0 +1,12 @@
+menu "MX3 Options"
+       depends on ARCH_MX3
+
+config MACH_MX31ADS
+       bool "Support MX31ADS platforms"
+       default y
+       help
+         Include support for MX31ADS platform. This includes specific
+         configurations for the board and its peripherals.
+
+endmenu
+
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
new file mode 100644 (file)
index 0000000..cbec997
--- /dev/null
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y                  := mm.o time.o
+obj-$(CONFIG_MACH_MX31ADS)     += mx31ads.o
diff --git a/arch/arm/mach-mx3/Makefile.boot b/arch/arm/mach-mx3/Makefile.boot
new file mode 100644 (file)
index 0000000..e1dd366
--- /dev/null
@@ -0,0 +1,3 @@
+   zreladdr-y  := 0x80008000
+params_phys-y  := 0x80000100
+initrd_phys-y  := 0x80800000
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
new file mode 100644 (file)
index 0000000..41dad48
--- /dev/null
@@ -0,0 +1,64 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+#include <asm/arch/common.h>
+
+/*!
+ * @file mm.c
+ *
+ * @brief This file creates static virtual to physical mappings, common to all MX3 boards.
+ *
+ * @ingroup Memory
+ */
+
+/*!
+ * This table defines static virtual address mappings for I/O regions.
+ * These are the mappings common across all MX3 boards.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+       {
+               .virtual        = X_MEMC_BASE_ADDR_VIRT,
+               .pfn            = __phys_to_pfn(X_MEMC_BASE_ADDR),
+               .length         = X_MEMC_SIZE,
+               .type           = MT_DEVICE
+       }, {
+               .virtual        = AVIC_BASE_ADDR_VIRT,
+               .pfn            = __phys_to_pfn(AVIC_BASE_ADDR),
+               .length         = AVIC_SIZE,
+               .type           = MT_NONSHARED_DEVICE
+       },
+};
+
+/*!
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mxc_map_io(void)
+{
+       iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
new file mode 100644 (file)
index 0000000..7e89bdc
--- /dev/null
@@ -0,0 +1,142 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <asm/arch/common.h>
+
+/*!
+ * @file mx31ads.c
+ *
+ * @brief This file contains the board-specific initialization routines.
+ *
+ * @ingroup System
+ */
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+/*!
+ * The serial port definition structure.
+ */
+static struct plat_serial8250_port serial_platform_data[] = {
+       {
+               .membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
+               .mapbase  = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA),
+               .irq      = EXPIO_INT_XUART_INTA,
+               .uartclk  = 14745600,
+               .regshift = 0,
+               .iotype   = UPIO_MEM,
+               .flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
+       }, {
+               .membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
+               .mapbase  = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB),
+               .irq      = EXPIO_INT_XUART_INTB,
+               .uartclk  = 14745600,
+               .regshift = 0,
+               .iotype   = UPIO_MEM,
+               .flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
+       },
+       {},
+};
+
+static struct platform_device serial_device = {
+       .name   = "serial8250",
+       .id     = 0,
+       .dev    = {
+               .platform_data = serial_platform_data,
+       },
+};
+
+static int __init mxc_init_extuart(void)
+{
+       return platform_device_register(&serial_device);
+}
+#else
+static inline int mxc_init_extuart(void)
+{
+       return 0;
+}
+#endif
+
+/*!
+ * This structure defines static mappings for the i.MX31ADS board.
+ */
+static struct map_desc mx31ads_io_desc[] __initdata = {
+       {
+               .virtual        = AIPS1_BASE_ADDR_VIRT,
+               .pfn            = __phys_to_pfn(AIPS1_BASE_ADDR),
+               .length         = AIPS1_SIZE,
+               .type           = MT_NONSHARED_DEVICE
+       }, {
+               .virtual        = SPBA0_BASE_ADDR_VIRT,
+               .pfn            = __phys_to_pfn(SPBA0_BASE_ADDR),
+               .length         = SPBA0_SIZE,
+               .type           = MT_NONSHARED_DEVICE
+       }, {
+               .virtual        = AIPS2_BASE_ADDR_VIRT,
+               .pfn            = __phys_to_pfn(AIPS2_BASE_ADDR),
+               .length         = AIPS2_SIZE,
+               .type           = MT_NONSHARED_DEVICE
+       }, {
+               .virtual        = CS4_BASE_ADDR_VIRT,
+               .pfn            = __phys_to_pfn(CS4_BASE_ADDR),
+               .length         = CS4_SIZE / 2,
+               .type           = MT_DEVICE
+       },
+};
+
+/*!
+ * Set up static virtual mappings.
+ */
+void __init mx31ads_map_io(void)
+{
+       mxc_map_io();
+       iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
+}
+
+/*!
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+       mxc_init_extuart();
+}
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_MX31ADS data structure.
+ */
+MACHINE_START(MX31ADS, "Freescale MX31ADS")
+       /* Maintainer: Freescale Semiconductor, Inc. */
+       .phys_io        = AIPS1_BASE_ADDR,
+       .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+       .boot_params    = PHYS_OFFSET + 0x100,
+       .map_io         = mx31ads_map_io,
+       .init_irq       = mxc_init_irq,
+       .init_machine   = mxc_board_init,
+       .timer          = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/time.c b/arch/arm/mach-mx3/time.c
new file mode 100644 (file)
index 0000000..e81fb5c
--- /dev/null
@@ -0,0 +1,152 @@
+/*
+ * System Timer Interrupt reconfigured to run in free-run mode.
+ * Author: Vitaly Wool
+ * Copyright 2004 MontaVista Software Inc.
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*!
+ * @file time.c
+ * @brief This file contains OS tick and wdog timer implementations.
+ *
+ * This file contains OS tick and wdog timer implementations.
+ *
+ * @ingroup Timers
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach/time.h>
+#include <asm/io.h>
+#include <asm/arch/common.h>
+
+/*!
+ * This is the timer interrupt service routine to do required tasks.
+ * It also services the WDOG timer at the frequency of twice per WDOG
+ * timeout value. For example, if the WDOG's timeout value is 4 (2
+ * seconds since the WDOG runs at 0.5Hz), it will be serviced once
+ * every 2/2=1 second.
+ *
+ * @param  irq          GPT interrupt source number (not used)
+ * @param  dev_id       this parameter is not used
+ * @return always returns \b IRQ_HANDLED as defined in
+ *         include/linux/interrupt.h.
+ */
+static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
+{
+       unsigned int next_match;
+
+       write_seqlock(&xtime_lock);
+
+       if (__raw_readl(MXC_GPT_GPTSR) & GPTSR_OF1) {
+               do {
+                       timer_tick();
+                       next_match = __raw_readl(MXC_GPT_GPTOCR1) + LATCH;
+                       __raw_writel(GPTSR_OF1, MXC_GPT_GPTSR);
+                       __raw_writel(next_match, MXC_GPT_GPTOCR1);
+               } while ((signed long)(next_match -
+                                      __raw_readl(MXC_GPT_GPTCNT)) <= 0);
+       }
+
+       write_sequnlock(&xtime_lock);
+
+       return IRQ_HANDLED;
+}
+
+/*!
+ * This function is used to obtain the number of microseconds since the last
+ * timer interrupt. Note that interrupts is disabled by do_gettimeofday().
+ *
+ * @return the number of microseconds since the last timer interrupt.
+ */
+static unsigned long mxc_gettimeoffset(void)
+{
+       unsigned long ticks_to_match, elapsed, usec, tick_usec, i;
+
+       /* Get ticks before next timer match */
+       ticks_to_match =
+           __raw_readl(MXC_GPT_GPTOCR1) - __raw_readl(MXC_GPT_GPTCNT);
+
+       /* We need elapsed ticks since last match */
+       elapsed = LATCH - ticks_to_match;
+
+       /* Now convert them to usec */
+       /* Insure no overflow when calculating the usec below */
+       for (i = 1, tick_usec = tick_nsec / 1000;; i *= 2) {
+               tick_usec /= i;
+               if ((0xFFFFFFFF / tick_usec) > elapsed)
+                       break;
+       }
+       usec = (unsigned long)(elapsed * tick_usec) / (LATCH / i);
+
+       return usec;
+}
+
+/*!
+ * The OS tick timer interrupt structure.
+ */
+static struct irqaction timer_irq = {
+       .name = "MXC Timer Tick",
+       .flags = IRQF_DISABLED | IRQF_TIMER,
+       .handler = mxc_timer_interrupt
+};
+
+/*!
+ * This function is used to initialize the GPT to produce an interrupt
+ * based on HZ.  It is called by start_kernel() during system startup.
+ */
+void __init mxc_init_time(void)
+{
+       u32 reg, v;
+       reg = __raw_readl(MXC_GPT_GPTCR);
+       reg &= ~GPTCR_ENABLE;
+       __raw_writel(reg, MXC_GPT_GPTCR);
+       reg |= GPTCR_SWR;
+       __raw_writel(reg, MXC_GPT_GPTCR);
+
+       while ((__raw_readl(MXC_GPT_GPTCR) & GPTCR_SWR) != 0)
+               cpu_relax();
+
+       reg = GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ;
+       __raw_writel(reg, MXC_GPT_GPTCR);
+
+       /* TODO: get timer rate from clk driver */
+       v = 66500000;
+
+       __raw_writel((v / CLOCK_TICK_RATE) - 1, MXC_GPT_GPTPR);
+
+       if ((v % CLOCK_TICK_RATE) != 0) {
+               pr_info("\nWARNING: Can't generate CLOCK_TICK_RATE at %d Hz\n",
+                       CLOCK_TICK_RATE);
+       }
+       pr_info("Actual CLOCK_TICK_RATE is %d Hz\n",
+               v / ((__raw_readl(MXC_GPT_GPTPR) & 0xFFF) + 1));
+
+       reg = __raw_readl(MXC_GPT_GPTCNT);
+       reg += LATCH;
+       __raw_writel(reg, MXC_GPT_GPTOCR1);
+
+       setup_irq(MXC_INT_GPT, &timer_irq);
+
+       reg = __raw_readl(MXC_GPT_GPTCR);
+       reg =
+           GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ | GPTCR_STOPEN | GPTCR_DOZEN |
+           GPTCR_WAITEN | GPTCR_ENMOD | GPTCR_ENABLE;
+       __raw_writel(reg, MXC_GPT_GPTCR);
+
+       __raw_writel(GPTIR_OF1IE, MXC_GPT_GPTIR);
+}
+
+struct sys_timer mxc_timer = {
+       .init = mxc_init_time,
+       .offset = mxc_gettimeoffset,
+};
index e7904bc92c73f846abda2b872f3c3e86139c0cfd..699b899214ae4bb079de2d110468f5f22ee56ca6 100644 (file)
@@ -345,7 +345,8 @@ config CPU_XSC3
 # ARMv6
 config CPU_V6
        bool "Support ARM V6 processor"
-       depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2
+       depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3
+       default y if ARCH_MX3
        select CPU_32v6
        select CPU_ABRT_EV6
        select CPU_CACHE_V6
@@ -359,7 +360,7 @@ config CPU_V6
 config CPU_32v6K
        bool "Support ARM V6K processor extensions" if !SMP
        depends on CPU_V6
-       default y if SMP
+       default y if SMP && !ARCH_MX3
        help
          Say Y here if your ARMv6 processor supports the 'K' extension.
          This enables the kernel to use some instructions not present
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
new file mode 100644 (file)
index 0000000..03a65c0
--- /dev/null
@@ -0,0 +1,20 @@
+if ARCH_MXC
+
+menu "Freescale MXC Implementations"
+
+choice
+       prompt "MXC/iMX System Type"
+       default 0
+
+config ARCH_MX3
+       bool "MX3-based"
+       help
+         This enables support for systems based on the Freescale i.MX3 family
+
+endchoice
+
+source "arch/arm/mach-mx3/Kconfig"
+
+endmenu
+
+endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
new file mode 100644 (file)
index 0000000..66ad9c2
--- /dev/null
@@ -0,0 +1,10 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common support
+obj-y := irq.o
+
+obj-m :=
+obj-n :=
+obj-  :=
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
new file mode 100644 (file)
index 0000000..87d253b
--- /dev/null
@@ -0,0 +1,83 @@
+/*
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/arch/common.h>
+
+/*!
+ * Disable interrupt number "irq" in the AVIC
+ *
+ * @param  irq          interrupt source number
+ */
+static void mxc_mask_irq(unsigned int irq)
+{
+       __raw_writel(irq, AVIC_INTDISNUM);
+}
+
+/*!
+ * Enable interrupt number "irq" in the AVIC
+ *
+ * @param  irq          interrupt source number
+ */
+static void mxc_unmask_irq(unsigned int irq)
+{
+       __raw_writel(irq, AVIC_INTENNUM);
+}
+
+static struct irq_chip mxc_avic_chip = {
+       .mask_ack = mxc_mask_irq,
+       .mask = mxc_mask_irq,
+       .unmask = mxc_unmask_irq,
+};
+
+/*!
+ * This function initializes the AVIC hardware and disables all the
+ * interrupts. It registers the interrupt enable and disable functions
+ * to the kernel for each interrupt source.
+ */
+void __init mxc_init_irq(void)
+{
+       int i;
+       u32 reg;
+
+       /* put the AVIC into the reset value with
+        * all interrupts disabled
+        */
+       __raw_writel(0, AVIC_INTCNTL);
+       __raw_writel(0x1f, AVIC_NIMASK);
+
+       /* disable all interrupts */
+       __raw_writel(0, AVIC_INTENABLEH);
+       __raw_writel(0, AVIC_INTENABLEL);
+
+       /* all IRQ no FIQ */
+       __raw_writel(0, AVIC_INTTYPEH);
+       __raw_writel(0, AVIC_INTTYPEL);
+       for (i = 0; i < MXC_MAX_INT_LINES; i++) {
+               set_irq_chip(i, &mxc_avic_chip);
+               set_irq_handler(i, handle_level_irq);
+               set_irq_flags(i, IRQF_VALID);
+       }
+
+       /* Set WDOG2's interrupt the highest priority level (bit 28-31) */
+       reg = __raw_readl(AVIC_NIPRIORITY6);
+       reg |= (0xF << 28);
+       __raw_writel(reg, AVIC_NIPRIORITY6);
+
+       printk(KERN_INFO "MXC IRQ initialized\n");
+}
diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/include/asm-arm/arch-mxc/board-mx31ads.h
new file mode 100644 (file)
index 0000000..be29b83
--- /dev/null
@@ -0,0 +1,142 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
+
+/*!
+ * @name PBC Controller parameters
+ */
+/*! @{ */
+/*!
+ * Base address of PBC controller
+ */
+#define PBC_BASE_ADDRESS        IO_ADDRESS(CS4_BASE_ADDR)
+/* Offsets for the PBC Controller register */
+/*!
+ * PBC Board status register offset
+ */
+#define PBC_BSTAT               0x000002
+/*!
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET          0x000004
+/*!
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR        0x000006
+/*!
+ * PBC Board control register 2 set address.
+ */
+#define PBC_BCTRL2_SET          0x000008
+/*!
+ * PBC Board control register 2 clear address.
+ */
+#define PBC_BCTRL2_CLEAR        0x00000A
+/*!
+ * PBC Board control register 3 set address.
+ */
+#define PBC_BCTRL3_SET          0x00000C
+/*!
+ * PBC Board control register 3 clear address.
+ */
+#define PBC_BCTRL3_CLEAR        0x00000E
+/*!
+ * PBC Board control register 4 set address.
+ */
+#define PBC_BCTRL4_SET          0x000010
+/*!
+ * PBC Board control register 4 clear address.
+ */
+#define PBC_BCTRL4_CLEAR        0x000012
+/*!
+ * PBC Board status register 1.
+ */
+#define PBC_BSTAT1              0x000014
+/*!
+ * PBC Board interrupt status register.
+ */
+#define PBC_INTSTATUS           0x000016
+/*!
+ * PBC Board interrupt current status register.
+ */
+#define PBC_INTCURR_STATUS      0x000018
+/*!
+ * PBC Interrupt mask register set address.
+ */
+#define PBC_INTMASK_SET         0x00001A
+/*!
+ * PBC Interrupt mask register clear address.
+ */
+#define PBC_INTMASK_CLEAR       0x00001C
+
+/*!
+ * External UART A.
+ */
+#define PBC_SC16C652_UARTA      0x010000
+/*!
+ * External UART B.
+ */
+#define PBC_SC16C652_UARTB      0x010010
+/*!
+ * Ethernet Controller IO base address.
+ */
+#define PBC_CS8900A_IOBASE      0x020000
+/*!
+ * Ethernet Controller Memory base address.
+ */
+#define PBC_CS8900A_MEMBASE     0x021000
+/*!
+ * Ethernet Controller DMA base address.
+ */
+#define PBC_CS8900A_DMABASE     0x022000
+/*!
+ * External chip select 0.
+ */
+#define PBC_XCS0                0x040000
+/*!
+ * LCD Display enable.
+ */
+#define PBC_LCD_EN_B            0x060000
+/*!
+ * Code test debug enable.
+ */
+#define PBC_CODE_B              0x070000
+/*!
+ * PSRAM memory select.
+ */
+#define PBC_PSRAM_B             0x5000000
+
+#define PBC_INTSTATUS_REG      (PBC_INTSTATUS + PBC_BASE_ADDRESS)
+#define PBC_INTCURR_STATUS_REG (PBC_INTCURR_STATUS + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_SET_REG    (PBC_INTMASK_SET + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_CLEAR_REG  (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
+#define EXPIO_PARENT_INT       IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+
+#define EXPIO_INT_LOW_BAT      (MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_PB_IRQ       (MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_OTG_FS_OVR   (MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_FSH_OVR      (MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_RES4         (MXC_EXP_IO_BASE + 4)
+#define EXPIO_INT_RES5         (MXC_EXP_IO_BASE + 5)
+#define EXPIO_INT_RES6         (MXC_EXP_IO_BASE + 6)
+#define EXPIO_INT_RES7         (MXC_EXP_IO_BASE + 7)
+#define EXPIO_INT_ENET_INT     (MXC_EXP_IO_BASE + 8)
+#define EXPIO_INT_OTG_FS_INT   (MXC_EXP_IO_BASE + 9)
+#define EXPIO_INT_XUART_INTA   (MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_XUART_INTB   (MXC_EXP_IO_BASE + 11)
+#define EXPIO_INT_SYNTH_IRQ    (MXC_EXP_IO_BASE + 12)
+#define EXPIO_INT_CE_INT1      (MXC_EXP_IO_BASE + 13)
+#define EXPIO_INT_CE_INT2      (MXC_EXP_IO_BASE + 14)
+#define EXPIO_INT_RES15                (MXC_EXP_IO_BASE + 15)
+
+#define MXC_MAX_EXP_IO_LINES   16
+
+#endif                         /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/include/asm-arm/arch-mxc/common.h b/include/asm-arm/arch-mxc/common.h
new file mode 100644 (file)
index 0000000..23b4350
--- /dev/null
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_COMMON_H__
+#define __ASM_ARCH_MXC_COMMON_H__
+
+struct sys_timer;
+
+extern void mxc_map_io(void);
+extern void mxc_init_irq(void);
+extern struct sys_timer mxc_timer;
+
+#endif
diff --git a/include/asm-arm/arch-mxc/dma.h b/include/asm-arm/arch-mxc/dma.h
new file mode 100644 (file)
index 0000000..65e639d
--- /dev/null
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_DMA_H__
+#define __ASM_ARCH_MXC_DMA_H__
+
+/*!
+ * @file dma.h
+ * @brief This file contains Unified DMA API for all MXC platforms.
+ * The API is platform independent.
+ *
+ * @ingroup SDMA
+ */
+#endif
diff --git a/include/asm-arm/arch-mxc/entry-macro.S b/include/asm-arm/arch-mxc/entry-macro.S
new file mode 100644 (file)
index 0000000..b542433
--- /dev/null
@@ -0,0 +1,39 @@
+/*
+ *  Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+       @ this macro disables fast irq (not implemented)
+       .macro  disable_fiq
+       .endm
+
+       .macro  get_irqnr_preamble, base, tmp
+       .endm
+
+       .macro  arch_ret_to_user, tmp1, tmp2
+       .endm
+
+       @ this macro checks which interrupt occured
+       @ and returns its number in irqnr
+       @ and returns if an interrupt occured in irqstat
+       .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+       ldr     \base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
+       @ Load offset & priority of the highest priority
+       @ interrupt pending from AVIC_NIVECSR
+       ldr     \irqstat, [\base, #0x40]
+       @ Shift to get the decoded IRQ number, using ASR so
+       @ 'no interrupt pending' becomes 0xffffffff
+       mov     \irqnr, \irqstat, asr #16
+       @ set zero flag if IRQ + 1 == 0
+       adds    \tmp, \irqnr, #1
+       .endm
+
+       @ irq priority table (not used)
+       .macro  irq_prio_table
+       .endm
diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h
new file mode 100644 (file)
index 0000000..3c09b92
--- /dev/null
@@ -0,0 +1,52 @@
+/*
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*!
+ * @file hardware.h
+ * @brief This file contains the hardware definitions of the board.
+ *
+ * @ingroup System
+ */
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#define __ASM_ARCH_MXC_HARDWARE_H__
+
+#include <asm/sizes.h>
+
+#include <asm/arch/mx31.h>
+
+#include <asm/arch/mxc.h>
+
+#define MXC_MAX_GPIO_LINES      (GPIO_NUM_PIN * GPIO_PORT_NUM)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Board specific defines
+ * ---------------------------------------------------------------------------
+ */
+#define MXC_EXP_IO_BASE         (MXC_GPIO_INT_BASE + MXC_MAX_GPIO_LINES)
+
+#include <asm/arch/board-mx31ads.h>
+
+#ifndef MXC_MAX_EXP_IO_LINES
+#define MXC_MAX_EXP_IO_LINES 0
+#endif
+
+#define MXC_MAX_VIRTUAL_INTS   16
+#define MXC_VIRTUAL_INTS_BASE  (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
+#define MXC_SDIO1_CARD_IRQ     MXC_VIRTUAL_INTS_BASE
+#define MXC_SDIO2_CARD_IRQ     (MXC_VIRTUAL_INTS_BASE + 1)
+#define MXC_SDIO3_CARD_IRQ     (MXC_VIRTUAL_INTS_BASE + 2)
+
+#define MXC_MAX_INTS            (MXC_MAX_INT_LINES + \
+                                MXC_MAX_GPIO_LINES + \
+                                MXC_MAX_EXP_IO_LINES + \
+                                MXC_MAX_VIRTUAL_INTS)
+
+#endif                         /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/include/asm-arm/arch-mxc/io.h b/include/asm-arm/arch-mxc/io.h
new file mode 100644 (file)
index 0000000..cf6c83a
--- /dev/null
@@ -0,0 +1,33 @@
+/*
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*!
+ * @file io.h
+ * @brief This file contains some memory mapping macros.
+ * @note There is no real ISA or PCI buses. But have to define these macros
+ * for some drivers to compile.
+ *
+ * @ingroup System
+ */
+
+#ifndef __ASM_ARCH_MXC_IO_H__
+#define __ASM_ARCH_MXC_IO_H__
+
+/*! Allow IO space to be anywhere in the memory */
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*!
+ * io address mapping macro
+ */
+#define __io(a)                        ((void __iomem *)(a))
+
+#define __mem_pci(a)           (a)
+
+#endif
diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h
new file mode 100644 (file)
index 0000000..e4686c6
--- /dev/null
@@ -0,0 +1,38 @@
+/*
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_IRQS_H__
+#define __ASM_ARCH_MXC_IRQS_H__
+
+#include <asm/hardware.h>
+
+/*!
+ * @file irqs.h
+ * @brief This file defines the number of normal interrupts and fast interrupts
+ *
+ * @ingroup Interrupt
+ */
+
+#define MXC_IRQ_TO_EXPIO(irq)  ((irq) - MXC_EXP_IO_BASE)
+
+#define MXC_IRQ_TO_GPIO(irq)   ((irq) - MXC_GPIO_INT_BASE)
+#define MXC_GPIO_TO_IRQ(x)     (MXC_GPIO_INT_BASE + x)
+
+/*!
+ * Number of normal interrupts
+ */
+#define NR_IRQS                MXC_MAX_INTS
+
+/*!
+ * Number of fast interrupts
+ */
+#define NR_FIQS                MXC_MAX_INTS
+
+#endif                         /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/include/asm-arm/arch-mxc/memory.h b/include/asm-arm/arch-mxc/memory.h
new file mode 100644 (file)
index 0000000..c89aac8
--- /dev/null
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MEMORY_H__
+#define __ASM_ARCH_MXC_MEMORY_H__
+
+#include <asm/hardware.h>
+
+/*!
+ * @file memory.h
+ * @brief This file contains macros needed by the Linux kernel and drivers.
+ *
+ * @ingroup Memory
+ */
+
+/*!
+ * Virtual view <-> DMA view memory address translations
+ * This macro is used to translate the virtual address to an address
+ * suitable to be passed to set_dma_addr()
+ */
+#define __virt_to_bus(a)       __virt_to_phys(a)
+
+/*!
+ * Used to convert an address for DMA operations to an address that the
+ * kernel can use.
+ */
+#define __bus_to_virt(a)       __phys_to_virt(a)
+
+#endif                         /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h
new file mode 100644 (file)
index 0000000..85c49c9
--- /dev/null
@@ -0,0 +1,335 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX31_H__
+#define __ASM_ARCH_MXC_MX31_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/*!
+ * defines the hardware clock tick rate
+ */
+#define CLOCK_TICK_RATE                16625000
+
+/*
+ * MX31 memory map:
+ *
+ * Virt                Phys            Size    What
+ * ---------------------------------------------------------------------------
+ * F8000000    1FFC0000        16K     IRAM
+ * F9000000    30000000        256M    L2CC
+ * FC000000    43F00000        1M      AIPS 1
+ * FC100000    50000000        1M      SPBA
+ * FC200000    53F00000        1M      AIPS 2
+ * FC500000    60000000        128M    ROMPATCH
+ * FC400000    68000000        128M    AVIC
+ *             70000000        256M    IPU (MAX M2)
+ *             80000000        256M    CSD0 SDRAM/DDR
+ *             90000000        256M    CSD1 SDRAM/DDR
+ *             A0000000        128M    CS0 Flash
+ *             A8000000        128M    CS1 Flash
+ *             B0000000        32M     CS2
+ *             B2000000        32M     CS3
+ * F4000000    B4000000        32M     CS4
+ *             B6000000        32M     CS5
+ * FC320000    B8000000        64K     NAND, SDRAM, WEIM, M3IF, EMI controllers
+ *             C0000000        64M     PCMCIA/CF
+ */
+
+#define CS0_BASE_ADDR          0xA0000000
+#define CS1_BASE_ADDR          0xA8000000
+#define CS2_BASE_ADDR          0xB0000000
+#define CS3_BASE_ADDR          0xB2000000
+
+#define CS4_BASE_ADDR          0xB4000000
+#define CS4_BASE_ADDR_VIRT     0xF4000000
+#define CS4_SIZE               SZ_32M
+
+#define CS5_BASE_ADDR          0xB6000000
+#define PCMCIA_MEM_BASE_ADDR   0xBC000000
+
+/*
+ * IRAM
+ */
+#define IRAM_BASE_ADDR         0x1FFC0000      /* internal ram */
+#define IRAM_BASE_ADDR_VIRT    0xF8000000
+#define IRAM_SIZE              SZ_16K
+
+/*
+ * L2CC
+ */
+#define L2CC_BASE_ADDR         0x30000000
+#define L2CC_BASE_ADDR_VIRT    0xF9000000
+#define L2CC_SIZE              SZ_1M
+
+/*
+ * AIPS 1
+ */
+#define AIPS1_BASE_ADDR                0x43F00000
+#define AIPS1_BASE_ADDR_VIRT   0xFC000000
+#define AIPS1_SIZE             SZ_1M
+
+#define MAX_BASE_ADDR          (AIPS1_BASE_ADDR + 0x00004000)
+#define EVTMON_BASE_ADDR       (AIPS1_BASE_ADDR + 0x00008000)
+#define CLKCTL_BASE_ADDR       (AIPS1_BASE_ADDR + 0x0000C000)
+#define ETB_SLOT4_BASE_ADDR    (AIPS1_BASE_ADDR + 0x00010000)
+#define ETB_SLOT5_BASE_ADDR    (AIPS1_BASE_ADDR + 0x00014000)
+#define ECT_CTIO_BASE_ADDR     (AIPS1_BASE_ADDR + 0x00018000)
+#define I2C_BASE_ADDR          (AIPS1_BASE_ADDR + 0x00080000)
+#define I2C3_BASE_ADDR         (AIPS1_BASE_ADDR + 0x00084000)
+#define OTG_BASE_ADDR          (AIPS1_BASE_ADDR + 0x00088000)
+#define ATA_BASE_ADDR          (AIPS1_BASE_ADDR + 0x0008C000)
+#define UART1_BASE_ADDR        (AIPS1_BASE_ADDR + 0x00090000)
+#define UART2_BASE_ADDR        (AIPS1_BASE_ADDR + 0x00094000)
+#define I2C2_BASE_ADDR         (AIPS1_BASE_ADDR + 0x00098000)
+#define OWIRE_BASE_ADDR        (AIPS1_BASE_ADDR + 0x0009C000)
+#define SSI1_BASE_ADDR         (AIPS1_BASE_ADDR + 0x000A0000)
+#define CSPI1_BASE_ADDR        (AIPS1_BASE_ADDR + 0x000A4000)
+#define KPP_BASE_ADDR          (AIPS1_BASE_ADDR + 0x000A8000)
+#define IOMUXC_BASE_ADDR       (AIPS1_BASE_ADDR + 0x000AC000)
+#define UART4_BASE_ADDR        (AIPS1_BASE_ADDR + 0x000B0000)
+#define UART5_BASE_ADDR        (AIPS1_BASE_ADDR + 0x000B4000)
+#define ECT_IP1_BASE_ADDR      (AIPS1_BASE_ADDR + 0x000B8000)
+#define ECT_IP2_BASE_ADDR      (AIPS1_BASE_ADDR + 0x000BC000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define SPBA0_BASE_ADDR        0x50000000
+#define SPBA0_BASE_ADDR_VIRT   0xFC100000
+#define SPBA0_SIZE             SZ_1M
+
+#define MMC_SDHC1_BASE_ADDR    (SPBA0_BASE_ADDR + 0x00004000)
+#define MMC_SDHC2_BASE_ADDR    (SPBA0_BASE_ADDR + 0x00008000)
+#define UART3_BASE_ADDR        (SPBA0_BASE_ADDR + 0x0000C000)
+#define CSPI2_BASE_ADDR        (SPBA0_BASE_ADDR + 0x00010000)
+#define SSI2_BASE_ADDR         (SPBA0_BASE_ADDR + 0x00014000)
+#define SIM1_BASE_ADDR         (SPBA0_BASE_ADDR + 0x00018000)
+#define IIM_BASE_ADDR          (SPBA0_BASE_ADDR + 0x0001C000)
+#define ATA_DMA_BASE_ADDR      (SPBA0_BASE_ADDR + 0x00020000)
+#define MSHC1_BASE_ADDR                (SPBA0_BASE_ADDR + 0x00024000)
+#define MSHC2_BASE_ADDR                (SPBA0_BASE_ADDR + 0x00024000)
+#define SPBA_CTRL_BASE_ADDR    (SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * AIPS 2
+ */
+#define AIPS2_BASE_ADDR                0x53F00000
+#define AIPS2_BASE_ADDR_VIRT   0xFC200000
+#define AIPS2_SIZE             SZ_1M
+#define CCM_BASE_ADDR          (AIPS2_BASE_ADDR + 0x00080000)
+#define CSPI3_BASE_ADDR                (AIPS2_BASE_ADDR + 0x00084000)
+#define FIRI_BASE_ADDR         (AIPS2_BASE_ADDR + 0x0008C000)
+#define GPT1_BASE_ADDR         (AIPS2_BASE_ADDR + 0x00090000)
+#define EPIT1_BASE_ADDR                (AIPS2_BASE_ADDR + 0x00094000)
+#define EPIT2_BASE_ADDR                (AIPS2_BASE_ADDR + 0x00098000)
+#define GPIO3_BASE_ADDR                (AIPS2_BASE_ADDR + 0x000A4000)
+#define SCC_BASE_ADDR          (AIPS2_BASE_ADDR + 0x000AC000)
+#define SCM_BASE_ADDR          (AIPS2_BASE_ADDR + 0x000AE000)
+#define SMN_BASE_ADDR          (AIPS2_BASE_ADDR + 0x000AF000)
+#define RNGA_BASE_ADDR         (AIPS2_BASE_ADDR + 0x000B0000)
+#define IPU_CTRL_BASE_ADDR     (AIPS2_BASE_ADDR + 0x000C0000)
+#define AUDMUX_BASE_ADDR       (AIPS2_BASE_ADDR + 0x000C4000)
+#define MPEG4_ENC_BASE_ADDR    (AIPS2_BASE_ADDR + 0x000C8000)
+#define GPIO1_BASE_ADDR                (AIPS2_BASE_ADDR + 0x000CC000)
+#define GPIO2_BASE_ADDR                (AIPS2_BASE_ADDR + 0x000D0000)
+#define SDMA_BASE_ADDR         (AIPS2_BASE_ADDR + 0x000D4000)
+#define RTC_BASE_ADDR          (AIPS2_BASE_ADDR + 0x000D8000)
+#define WDOG_BASE_ADDR         (AIPS2_BASE_ADDR + 0x000DC000)
+#define PWM_BASE_ADDR          (AIPS2_BASE_ADDR + 0x000E0000)
+#define RTIC_BASE_ADDR         (AIPS2_BASE_ADDR + 0x000EC000)
+
+/*
+ * ROMP and AVIC
+ */
+#define ROMP_BASE_ADDR         0x60000000
+#define ROMP_BASE_ADDR_VIRT    0xFC500000
+#define ROMP_SIZE              SZ_1M
+
+#define AVIC_BASE_ADDR         0x68000000
+#define AVIC_BASE_ADDR_VIRT    0xFC400000
+#define AVIC_SIZE              SZ_1M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define X_MEMC_BASE_ADDR       0xB8000000
+#define X_MEMC_BASE_ADDR_VIRT  0xFC320000
+#define X_MEMC_SIZE            SZ_64K
+
+#define NFC_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x0000)
+#define ESDCTL_BASE_ADDR       (X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR         (X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR         (X_MEMC_BASE_ADDR + 0x3000)
+#define EMI_CTL_BASE_ADDR      (X_MEMC_BASE_ADDR + 0x4000)
+#define PCMCIA_CTL_BASE_ADDR   EMI_CTL_BASE_ADDR
+
+/*
+ * Memory regions and CS
+ */
+#define IPU_MEM_BASE_ADDR      0x70000000
+#define CSD0_BASE_ADDR         0x80000000
+#define CSD1_BASE_ADDR         0x90000000
+#define CS0_BASE_ADDR          0xA0000000
+#define CS1_BASE_ADDR          0xA8000000
+#define CS2_BASE_ADDR          0xB0000000
+#define CS3_BASE_ADDR          0xB2000000
+
+#define CS4_BASE_ADDR          0xB4000000
+#define CS4_BASE_ADDR_VIRT     0xF4000000
+#define CS4_SIZE               SZ_32M
+
+#define CS5_BASE_ADDR          0xB6000000
+#define PCMCIA_MEM_BASE_ADDR   0xBC000000
+
+/*!
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x)   \
+       (((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\
+       ((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\
+       ((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
+       ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
+       ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
+       ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
+       ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
+       ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
+       ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
+       0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+
+#define IRAM_IO_ADDRESS(x)  \
+       (((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT)
+
+#define L2CC_IO_ADDRESS(x)  \
+       (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
+
+#define AIPS1_IO_ADDRESS(x)  \
+       (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
+
+#define SPBA0_IO_ADDRESS(x)  \
+       (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
+
+#define AIPS2_IO_ADDRESS(x)  \
+       (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
+
+#define ROMP_IO_ADDRESS(x)  \
+       (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x)  \
+       (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x)  \
+       (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x)  \
+       (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+       (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/* Start of physical RAM - On many MX31 platforms, this is the first SDRAM bank (CSD0) */
+#define PHYS_OFFSET             CSD0_BASE_ADDR
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_PEN_ADS7843    0
+#define MXC_INT_RESV1          1
+#define MXC_INT_CS8900A                2
+#define MXC_INT_I2C3           3
+#define MXC_INT_I2C2           4
+#define MXC_INT_MPEG4_ENCODER  5
+#define MXC_INT_RTIC           6
+#define MXC_INT_FIRI           7
+#define MXC_INT_MMC_SDHC2      8
+#define MXC_INT_MMC_SDHC1      9
+#define MXC_INT_I2C            10
+#define MXC_INT_SSI2           11
+#define MXC_INT_SSI1           12
+#define MXC_INT_CSPI2          13
+#define MXC_INT_CSPI1          14
+#define MXC_INT_ATA            15
+#define MXC_INT_MBX            16
+#define MXC_INT_CSPI3          17
+#define MXC_INT_UART3          18
+#define MXC_INT_IIM            19
+#define MXC_INT_SIM2           20
+#define MXC_INT_SIM1           21
+#define MXC_INT_RNGA           22
+#define MXC_INT_EVTMON         23
+#define MXC_INT_KPP            24
+#define MXC_INT_RTC            25
+#define MXC_INT_PWM            26
+#define MXC_INT_EPIT2          27
+#define MXC_INT_EPIT1          28
+#define MXC_INT_GPT            29
+#define MXC_INT_RESV30         30
+#define MXC_INT_RESV31         31
+#define MXC_INT_UART2          32
+#define MXC_INT_NANDFC         33
+#define MXC_INT_SDMA           34
+#define MXC_INT_USB1           35
+#define MXC_INT_USB2           36
+#define MXC_INT_USB3           37
+#define MXC_INT_USB4           38
+#define MXC_INT_MSHC1          39
+#define MXC_INT_MSHC2          40
+#define MXC_INT_IPU_ERR                41
+#define MXC_INT_IPU_SYN                42
+#define MXC_INT_RESV43         43
+#define MXC_INT_RESV44         44
+#define MXC_INT_UART1          45
+#define MXC_INT_UART4          46
+#define MXC_INT_UART5          47
+#define MXC_INT_ECT            48
+#define MXC_INT_SCC_SCM                49
+#define MXC_INT_SCC_SMN                50
+#define MXC_INT_GPIO2          51
+#define MXC_INT_GPIO1          52
+#define MXC_INT_CCM            53
+#define MXC_INT_PCMCIA         54
+#define MXC_INT_WDOG           55
+#define MXC_INT_GPIO3          56
+#define MXC_INT_RESV57         57
+#define MXC_INT_EXT_POWER      58
+#define MXC_INT_EXT_TEMPER     59
+#define MXC_INT_EXT_SENSOR60   60
+#define MXC_INT_EXT_SENSOR61   61
+#define MXC_INT_EXT_WDOG       62
+#define MXC_INT_EXT_TV         63
+
+#define MXC_MAX_INT_LINES      64
+
+#define MXC_GPIO_INT_BASE      MXC_MAX_INT_LINES
+
+/*!
+ * Number of GPIO port as defined in the IC Spec
+ */
+#define GPIO_PORT_NUM          3
+/*!
+ * Number of GPIO pins per port
+ */
+#define GPIO_NUM_PIN           32
+
+#define PROD_SIGNATURE         0x1     /* For MX31 */
+
+#define SYSTEM_REV_MIN         CHIP_REV_1_0
+#define SYSTEM_REV_NUM         3
+
+#endif                 /*  __ASM_ARCH_MXC_MX31_H__ */
diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h
new file mode 100644 (file)
index 0000000..0837f1f
--- /dev/null
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_H__
+#define __ASM_ARCH_MXC_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/*
+ *****************************************
+ * GPT  Register definitions             *
+ *****************************************
+ */
+#define MXC_GPT_GPTCR          IO_ADDRESS(GPT1_BASE_ADDR + 0x00)
+#define MXC_GPT_GPTPR          IO_ADDRESS(GPT1_BASE_ADDR + 0x04)
+#define MXC_GPT_GPTSR          IO_ADDRESS(GPT1_BASE_ADDR + 0x08)
+#define MXC_GPT_GPTIR          IO_ADDRESS(GPT1_BASE_ADDR + 0x0C)
+#define MXC_GPT_GPTOCR1                IO_ADDRESS(GPT1_BASE_ADDR + 0x10)
+#define MXC_GPT_GPTOCR2                IO_ADDRESS(GPT1_BASE_ADDR + 0x14)
+#define MXC_GPT_GPTOCR3                IO_ADDRESS(GPT1_BASE_ADDR + 0x18)
+#define MXC_GPT_GPTICR1                IO_ADDRESS(GPT1_BASE_ADDR + 0x1C)
+#define MXC_GPT_GPTICR2                IO_ADDRESS(GPT1_BASE_ADDR + 0x20)
+#define MXC_GPT_GPTCNT         IO_ADDRESS(GPT1_BASE_ADDR + 0x24)
+
+/*!
+ * GPT Control register bit definitions
+ */
+#define GPTCR_FO3                      (1 << 31)
+#define GPTCR_FO2                      (1 << 30)
+#define GPTCR_FO1                      (1 << 29)
+
+#define GPTCR_OM3_SHIFT                        26
+#define GPTCR_OM3_MASK                 (7 << GPTCR_OM3_SHIFT)
+#define GPTCR_OM3_DISCONNECTED         (0 << GPTCR_OM3_SHIFT)
+#define GPTCR_OM3_TOGGLE               (1 << GPTCR_OM3_SHIFT)
+#define GPTCR_OM3_CLEAR                        (2 << GPTCR_OM3_SHIFT)
+#define GPTCR_OM3_SET                  (3 << GPTCR_OM3_SHIFT)
+#define GPTCR_OM3_GENERATE_LOW         (7 << GPTCR_OM3_SHIFT)
+
+#define GPTCR_OM2_SHIFT                        23
+#define GPTCR_OM2_MASK                 (7 << GPTCR_OM2_SHIFT)
+#define GPTCR_OM2_DISCONNECTED         (0 << GPTCR_OM2_SHIFT)
+#define GPTCR_OM2_TOGGLE               (1 << GPTCR_OM2_SHIFT)
+#define GPTCR_OM2_CLEAR                        (2 << GPTCR_OM2_SHIFT)
+#define GPTCR_OM2_SET                  (3 << GPTCR_OM2_SHIFT)
+#define GPTCR_OM2_GENERATE_LOW         (7 << GPTCR_OM2_SHIFT)
+
+#define GPTCR_OM1_SHIFT                        20
+#define GPTCR_OM1_MASK                 (7 << GPTCR_OM1_SHIFT)
+#define GPTCR_OM1_DISCONNECTED         (0 << GPTCR_OM1_SHIFT)
+#define GPTCR_OM1_TOGGLE               (1 << GPTCR_OM1_SHIFT)
+#define GPTCR_OM1_CLEAR                        (2 << GPTCR_OM1_SHIFT)
+#define GPTCR_OM1_SET                  (3 << GPTCR_OM1_SHIFT)
+#define GPTCR_OM1_GENERATE_LOW         (7 << GPTCR_OM1_SHIFT)
+
+#define GPTCR_IM2_SHIFT                        18
+#define GPTCR_IM2_MASK                 (3 << GPTCR_IM2_SHIFT)
+#define GPTCR_IM2_CAPTURE_DISABLE      (0 << GPTCR_IM2_SHIFT)
+#define GPTCR_IM2_CAPTURE_RISING       (1 << GPTCR_IM2_SHIFT)
+#define GPTCR_IM2_CAPTURE_FALLING      (2 << GPTCR_IM2_SHIFT)
+#define GPTCR_IM2_CAPTURE_BOTH         (3 << GPTCR_IM2_SHIFT)
+
+#define GPTCR_IM1_SHIFT                        16
+#define GPTCR_IM1_MASK                 (3 << GPTCR_IM1_SHIFT)
+#define GPTCR_IM1_CAPTURE_DISABLE      (0 << GPTCR_IM1_SHIFT)
+#define GPTCR_IM1_CAPTURE_RISING       (1 << GPTCR_IM1_SHIFT)
+#define GPTCR_IM1_CAPTURE_FALLING      (2 << GPTCR_IM1_SHIFT)
+#define GPTCR_IM1_CAPTURE_BOTH         (3 << GPTCR_IM1_SHIFT)
+
+#define GPTCR_SWR                      (1 << 15)
+#define GPTCR_FRR                      (1 << 9)
+
+#define GPTCR_CLKSRC_SHIFT             6
+#define GPTCR_CLKSRC_MASK              (7 << GPTCR_CLKSRC_SHIFT)
+#define GPTCR_CLKSRC_NOCLOCK           (0 << GPTCR_CLKSRC_SHIFT)
+#define GPTCR_CLKSRC_HIGHFREQ          (2 << GPTCR_CLKSRC_SHIFT)
+#define GPTCR_CLKSRC_CLKIN             (3 << GPTCR_CLKSRC_SHIFT)
+#define GPTCR_CLKSRC_CLK32K            (7 << GPTCR_CLKSRC_SHIFT)
+
+#define GPTCR_STOPEN                   (1 << 5)
+#define GPTCR_DOZEN                    (1 << 4)
+#define GPTCR_WAITEN                   (1 << 3)
+#define GPTCR_DBGEN                    (1 << 2)
+
+#define GPTCR_ENMOD                    (1 << 1)
+#define GPTCR_ENABLE                   (1 << 0)
+
+#define GPTSR_OF1                      (1 << 0)
+#define GPTSR_OF2                      (1 << 1)
+#define GPTSR_OF3                      (1 << 2)
+#define GPTSR_IF1                      (1 << 3)
+#define GPTSR_IF2                      (1 << 4)
+#define GPTSR_ROV                      (1 << 5)
+
+#define GPTIR_OF1IE                    GPTSR_OF1
+#define GPTIR_OF2IE                    GPTSR_OF2
+#define GPTIR_OF3IE                    GPTSR_OF3
+#define GPTIR_IF1IE                    GPTSR_IF1
+#define GPTIR_IF2IE                    GPTSR_IF2
+#define GPTIR_ROVIE                    GPTSR_ROV
+
+/*
+ *****************************************
+ * AVIC Registers                        *
+ *****************************************
+ */
+#define AVIC_BASE              IO_ADDRESS(AVIC_BASE_ADDR)
+#define AVIC_INTCNTL           (AVIC_BASE + 0x00)      /* int control reg */
+#define AVIC_NIMASK            (AVIC_BASE + 0x04)      /* int mask reg */
+#define AVIC_INTENNUM          (AVIC_BASE + 0x08)      /* int enable number reg */
+#define AVIC_INTDISNUM         (AVIC_BASE + 0x0C)      /* int disable number reg */
+#define AVIC_INTENABLEH                (AVIC_BASE + 0x10)      /* int enable reg high */
+#define AVIC_INTENABLEL                (AVIC_BASE + 0x14)      /* int enable reg low */
+#define AVIC_INTTYPEH          (AVIC_BASE + 0x18)      /* int type reg high */
+#define AVIC_INTTYPEL          (AVIC_BASE + 0x1C)      /* int type reg low */
+#define AVIC_NIPRIORITY7       (AVIC_BASE + 0x20)      /* norm int priority lvl7 */
+#define AVIC_NIPRIORITY6       (AVIC_BASE + 0x24)      /* norm int priority lvl6 */
+#define AVIC_NIPRIORITY5       (AVIC_BASE + 0x28)      /* norm int priority lvl5 */
+#define AVIC_NIPRIORITY4       (AVIC_BASE + 0x2C)      /* norm int priority lvl4 */
+#define AVIC_NIPRIORITY3       (AVIC_BASE + 0x30)      /* norm int priority lvl3 */
+#define AVIC_NIPRIORITY2       (AVIC_BASE + 0x34)      /* norm int priority lvl2 */
+#define AVIC_NIPRIORITY1       (AVIC_BASE + 0x38)      /* norm int priority lvl1 */
+#define AVIC_NIPRIORITY0       (AVIC_BASE + 0x3C)      /* norm int priority lvl0 */
+#define AVIC_NIVECSR           (AVIC_BASE + 0x40)      /* norm int vector/status */
+#define AVIC_FIVECSR           (AVIC_BASE + 0x44)      /* fast int vector/status */
+#define AVIC_INTSRCH           (AVIC_BASE + 0x48)      /* int source reg high */
+#define AVIC_INTSRCL           (AVIC_BASE + 0x4C)      /* int source reg low */
+#define AVIC_INTFRCH           (AVIC_BASE + 0x50)      /* int force reg high */
+#define AVIC_INTFRCL           (AVIC_BASE + 0x54)      /* int force reg low */
+#define AVIC_NIPNDH            (AVIC_BASE + 0x58)      /* norm int pending high */
+#define AVIC_NIPNDL            (AVIC_BASE + 0x5C)      /* norm int pending low */
+#define AVIC_FIPNDH            (AVIC_BASE + 0x60)      /* fast int pending high */
+#define AVIC_FIPNDL            (AVIC_BASE + 0x64)      /* fast int pending low */
+
+#define SYSTEM_PREV_REG                IO_ADDRESS(IIM_BASE_ADDR + 0x20)
+#define SYSTEM_SREV_REG                IO_ADDRESS(IIM_BASE_ADDR + 0x24)
+#define IIM_PROD_REV_SH                3
+#define IIM_PROD_REV_LEN       5
+
+#endif                         /*  __ASM_ARCH_MXC_H__ */
diff --git a/include/asm-arm/arch-mxc/system.h b/include/asm-arm/arch-mxc/system.h
new file mode 100644 (file)
index 0000000..109956b
--- /dev/null
@@ -0,0 +1,50 @@
+/*
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_SYSTEM_H__
+#define __ASM_ARCH_MXC_SYSTEM_H__
+
+/*!
+ * @file system.h
+ * @brief This file contains idle and reset functions.
+ *
+ * @ingroup System
+ */
+
+/*!
+ * This function puts the CPU into idle mode. It is called by default_idle()
+ * in process.c file.
+ */
+static inline void arch_idle(void)
+{
+       cpu_do_idle();
+}
+
+/*
+ * This function resets the system. It is called by machine_restart().
+ *
+ * @param  mode         indicates different kinds of resets
+ */
+static inline void arch_reset(char mode)
+{
+       cpu_reset(0);
+}
+
+#endif                         /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/include/asm-arm/arch-mxc/timex.h b/include/asm-arm/arch-mxc/timex.h
new file mode 100644 (file)
index 0000000..59019fa
--- /dev/null
@@ -0,0 +1,25 @@
+/*
+ *  Copyright (C) 1999 ARM Limited
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_TIMEX_H__
+#define __ASM_ARCH_MXC_TIMEX_H__
+
+#include <asm/hardware.h>      /* for CLOCK_TICK_RATE */
+
+#endif                         /* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/include/asm-arm/arch-mxc/uncompress.h b/include/asm-arm/arch-mxc/uncompress.h
new file mode 100644 (file)
index 0000000..ec5787d
--- /dev/null
@@ -0,0 +1,79 @@
+/*
+ *  include/asm-arm/arch-mxc/uncompress.h
+ *
+ *
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
+#define __ASM_ARCH_MXC_UNCOMPRESS_H__
+
+#define __MXC_BOOT_UNCOMPRESS
+
+#include <asm/hardware.h>
+#include <asm/processor.h>
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR  0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+
+static void putc(int ch)
+{
+       static unsigned long serial_port = 0;
+
+       if (unlikely(serial_port == 0)) {
+               do {
+                       serial_port = UART1_BASE_ADDR;
+                       if (UART(UCR1) & UCR1_UARTEN)
+                               break;
+                       serial_port = UART2_BASE_ADDR;
+                       if (UART(UCR1) & UCR1_UARTEN)
+                               break;
+                       return;
+               } while (0);
+       }
+
+       while (!(UART(USR2) & USR2_TXFE))
+               cpu_relax();
+
+       UART(TXR) = ch;
+}
+
+#define flush() do { } while (0)
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif                         /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/include/asm-arm/arch-mxc/vmalloc.h b/include/asm-arm/arch-mxc/vmalloc.h
new file mode 100644 (file)
index 0000000..83a73da
--- /dev/null
@@ -0,0 +1,36 @@
+/*
+ *  Copyright (C) 2000 Russell King.
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_VMALLOC_H__
+#define __ASM_ARCH_MXC_VMALLOC_H__
+
+/*!
+ * @file vmalloc.h
+ *
+ * @brief This file contains platform specific macros for vmalloc.
+ *
+ * @ingroup System
+ */
+
+/*!
+ * vmalloc ending address
+ */
+#define VMALLOC_END       0xF4000000
+
+#endif                         /* __ASM_ARCH_MXC_VMALLOC_H__ */