#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc6
-# Fri Dec 28 11:01:53 2007
+# Tue Jan 15 10:26:10 2008
#
CONFIG_PPC64=y
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
-CONFIG_ELECTRA_IDE=y
# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
help
Driver for MDIO via GPIO on PWRficient platforms
-config ELECTRA_IDE
- tristate "Electra IDE driver"
- default y
- depends on PPC_PASEMI && ATA
- select PATA_PLATFORM
- help
- This includes driver support for the Electra on-board IDE
- interface.
-
endmenu
obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o
obj-$(CONFIG_PPC_PASEMI_MDIO) += gpio_mdio.o
-obj-$(CONFIG_ELECTRA_IDE) += electra_ide.o
obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o
+++ /dev/null
-/*
- * Copyright (C) 2007 PA Semi, Inc
- *
- * Maintained by: Olof Johansson <olof@lixom.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/platform_device.h>
-
-#include <asm/prom.h>
-#include <asm/system.h>
-
-/* The electra IDE interface is incredibly simple: Just a device on the localbus
- * with interrupts hooked up to one of the GPIOs. The device tree contains the
- * address window and interrupt mappings already, and the pata_platform driver handles
- * the rest. We just need to hook the two up.
- */
-
-#define MAX_IFS 4 /* really, we have only one */
-
-static struct platform_device *pdevs[MAX_IFS];
-
-static int __devinit electra_ide_init(void)
-{
- struct device_node *np;
- struct resource r[3];
- int ret = 0;
- int i;
-
- np = of_find_compatible_node(NULL, "ide", "electra-ide");
- i = 0;
-
- while (np && i < MAX_IFS) {
- memset(r, 0, sizeof(r));
-
- /* pata_platform wants two address ranges: one for the base registers,
- * another for the control (altstatus). It's located at offset 0x3f6 in
- * the window, but the device tree only has one large register window
- * that covers both ranges. So we need to split it up by hand here:
- */
-
- ret = of_address_to_resource(np, 0, &r[0]);
- if (ret)
- goto out;
- ret = of_address_to_resource(np, 0, &r[1]);
- if (ret)
- goto out;
-
- r[1].start += 0x3f6;
- r[0].end = r[1].start-1;
-
- r[2].start = irq_of_parse_and_map(np, 0);
- r[2].end = irq_of_parse_and_map(np, 0);
- r[2].flags = IORESOURCE_IRQ;
-
- pr_debug("registering platform device at 0x%lx/0x%lx, irq is %ld\n",
- r[0].start, r[1].start, r[2].start);
- pdevs[i] = platform_device_register_simple("pata_platform", i, r, 3);
- if (IS_ERR(pdevs[i])) {
- ret = PTR_ERR(pdevs[i]);
- pdevs[i] = NULL;
- goto out;
- }
- np = of_find_compatible_node(np, "ide", "electra-ide");
- }
-out:
- return ret;
-}
-module_init(electra_ide_init);
-
-static void __devexit electra_ide_exit(void)
-{
- int i;
-
- for (i = 0; i < MAX_IFS; i++)
- if (pdevs[i])
- platform_device_unregister(pdevs[i]);
-}
-module_exit(electra_ide_exit);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
-MODULE_DESCRIPTION("PA Semi Electra IDE driver");
static int __init pasemi_idle_init(void)
{
- if (!machine_is(pasemi))
- return -ENODEV;
-
#ifndef CONFIG_PPC_PASEMI_CPUFREQ
printk(KERN_WARNING "No cpufreq driver, powersavings modes disabled\n");
current_mode = 0;
return 0;
}
-late_initcall(pasemi_idle_init);
+machine_late_initcall(pasemi, pasemi_idle_init);
static int __init idle_param(char *p)
{
struct pci_dev *dev;
int reg;
- if (!machine_is(pasemi))
- return -ENODEV;
-
/* Remap various SoC status registers for use by the MCE handler */
reg = 0;
return 0;
}
-device_initcall(pas_setup_mce_regs);
+machine_device_initcall(pasemi, pas_setup_mce_regs);
static __init void pas_init_IRQ(void)
{
srr0 = regs->nip;
srr1 = regs->msr;
- if (mpic_get_mcirq() == nmi_virq) {
+ if (nmi_virq != NO_IRQ && mpic_get_mcirq() == nmi_virq) {
printk(KERN_ERR "NMI delivered\n");
debugger(regs);
mpic_end_irq(nmi_virq);
static int __init pasemi_publish_devices(void)
{
- if (!machine_is(pasemi))
- return 0;
-
pasemi_pcmcia_init();
/* Publish OF platform devices for SDC and other non-PCI devices */
return 0;
}
-device_initcall(pasemi_publish_devices);
+machine_device_initcall(pasemi, pasemi_publish_devices);
/*
config PATA_PLATFORM
tristate "Generic platform device PATA support"
- depends on EMBEDDED || ARCH_RPC
+ depends on EMBEDDED || ARCH_RPC || PPC
help
This option enables support for generic directly connected ATA
devices commonly found on embedded systems.
If unsure, say N.
+config PATA_OF_PLATFORM
+ tristate "OpenFirmware platform device PATA support"
+ depends on PATA_PLATFORM && PPC_OF
+ help
+ This option enables support for generic directly connected ATA
+ devices commonly found on embedded systems with OpenFirmware
+ bindings.
+
+ If unsure, say N.
+
config PATA_ICSIDE
tristate "Acorn ICS PATA support"
depends on ARM && ARCH_ACORN
obj-$(CONFIG_PATA_SCC) += pata_scc.o
obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
+obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o
# Should be last but two libata driver
obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
--- /dev/null
+/*
+ * OF-platform PATA driver
+ *
+ * Copyright (c) 2007 MontaVista Software, Inc.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/pata_platform.h>
+
+static int __devinit pata_of_platform_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ int ret;
+ struct device_node *dn = ofdev->node;
+ struct resource io_res;
+ struct resource ctl_res;
+ struct resource irq_res;
+ unsigned int reg_shift = 0;
+ int pio_mode = 0;
+ int pio_mask;
+ const u32 *prop;
+
+ ret = of_address_to_resource(dn, 0, &io_res);
+ if (ret) {
+ dev_err(&ofdev->dev, "can't get IO address from "
+ "device tree\n");
+ return -EINVAL;
+ }
+
+ if (of_device_is_compatible(dn, "electra-ide")) {
+ /* Altstatus is really at offset 0x3f6 from the primary window
+ * on electra-ide. Adjust ctl_res and io_res accordingly.
+ */
+ ctl_res = io_res;
+ ctl_res.start = ctl_res.start+0x3f6;
+ io_res.end = ctl_res.start-1;
+ } else {
+ ret = of_address_to_resource(dn, 1, &ctl_res);
+ if (ret) {
+ dev_err(&ofdev->dev, "can't get CTL address from "
+ "device tree\n");
+ return -EINVAL;
+ }
+ }
+
+ ret = of_irq_to_resource(dn, 0, &irq_res);
+ if (ret == NO_IRQ)
+ irq_res.start = irq_res.end = -1;
+ else
+ irq_res.flags = 0;
+
+ prop = of_get_property(dn, "reg-shift", NULL);
+ if (prop)
+ reg_shift = *prop;
+
+ prop = of_get_property(dn, "pio-mode", NULL);
+ if (prop) {
+ pio_mode = *prop;
+ if (pio_mode > 6) {
+ dev_err(&ofdev->dev, "invalid pio-mode\n");
+ return -EINVAL;
+ }
+ } else {
+ dev_info(&ofdev->dev, "pio-mode unspecified, assuming PIO0\n");
+ }
+
+ pio_mask = 1 << pio_mode;
+ pio_mask |= (1 << pio_mode) - 1;
+
+ return __pata_platform_probe(&ofdev->dev, &io_res, &ctl_res, &irq_res,
+ reg_shift, pio_mask);
+}
+
+static int __devexit pata_of_platform_remove(struct of_device *ofdev)
+{
+ return __pata_platform_remove(&ofdev->dev);
+}
+
+static struct of_device_id pata_of_platform_match[] = {
+ { .compatible = "ata-generic", },
+ { .compatible = "electra-ide", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pata_of_platform_match);
+
+static struct of_platform_driver pata_of_platform_driver = {
+ .name = "pata_of_platform",
+ .match_table = pata_of_platform_match,
+ .probe = pata_of_platform_probe,
+ .remove = __devexit_p(pata_of_platform_remove),
+};
+
+static int __init pata_of_platform_init(void)
+{
+ return of_register_platform_driver(&pata_of_platform_driver);
+}
+module_init(pata_of_platform_init);
+
+static void __exit pata_of_platform_exit(void)
+{
+ of_unregister_platform_driver(&pata_of_platform_driver);
+}
+module_exit(pata_of_platform_exit);
+
+MODULE_DESCRIPTION("OF-platform PATA driver");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
};
static void pata_platform_setup_port(struct ata_ioports *ioaddr,
- struct pata_platform_info *info)
+ unsigned int shift)
{
- unsigned int shift = 0;
-
/* Fixup the port shift for platforms that need it */
- if (info && info->ioport_shift)
- shift = info->ioport_shift;
-
ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << shift);
ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << shift);
ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << shift);
}
/**
- * pata_platform_probe - attach a platform interface
- * @pdev: platform device
+ * __pata_platform_probe - attach a platform interface
+ * @dev: device
+ * @io_res: Resource representing I/O base
+ * @ctl_res: Resource representing CTL base
+ * @irq_res: Resource representing IRQ and its flags
+ * @ioport_shift: I/O port shift
+ * @__pio_mask: PIO mask
*
* Register a platform bus IDE interface. Such interfaces are PIO and we
* assume do not support IRQ sharing.
*
* If no IRQ resource is present, PIO polling mode is used instead.
*/
-static int __devinit pata_platform_probe(struct platform_device *pdev)
+int __devinit __pata_platform_probe(struct device *dev,
+ struct resource *io_res,
+ struct resource *ctl_res,
+ struct resource *irq_res,
+ unsigned int ioport_shift,
+ int __pio_mask)
{
- struct resource *io_res, *ctl_res;
struct ata_host *host;
struct ata_port *ap;
- struct pata_platform_info *pp_info;
unsigned int mmio;
- int irq;
-
- /*
- * Simple resource validation ..
- */
- if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) {
- dev_err(&pdev->dev, "invalid number of resources\n");
- return -EINVAL;
- }
-
- /*
- * Get the I/O base first
- */
- io_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (io_res == NULL) {
- io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (unlikely(io_res == NULL))
- return -EINVAL;
- }
-
- /*
- * Then the CTL base
- */
- ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1);
- if (ctl_res == NULL) {
- ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (unlikely(ctl_res == NULL))
- return -EINVAL;
- }
+ int irq = 0;
+ int irq_flags = 0;
/*
* Check for MMIO
/*
* And the IRQ
*/
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- irq = 0; /* no irq */
+ if (irq_res && irq_res->start > 0) {
+ irq = irq_res->start;
+ irq_flags = irq_res->flags;
+ }
/*
* Now that that's out of the way, wire up the port..
*/
- host = ata_host_alloc(&pdev->dev, 1);
+ host = ata_host_alloc(dev, 1);
if (!host)
return -ENOMEM;
ap = host->ports[0];
ap->ops = &pata_platform_port_ops;
- ap->pio_mask = pio_mask;
+ ap->pio_mask = __pio_mask;
ap->flags |= ATA_FLAG_SLAVE_POSS;
/*
* Handle the MMIO case
*/
if (mmio) {
- ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, io_res->start,
+ ap->ioaddr.cmd_addr = devm_ioremap(dev, io_res->start,
io_res->end - io_res->start + 1);
- ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, ctl_res->start,
+ ap->ioaddr.ctl_addr = devm_ioremap(dev, ctl_res->start,
ctl_res->end - ctl_res->start + 1);
} else {
- ap->ioaddr.cmd_addr = devm_ioport_map(&pdev->dev, io_res->start,
+ ap->ioaddr.cmd_addr = devm_ioport_map(dev, io_res->start,
io_res->end - io_res->start + 1);
- ap->ioaddr.ctl_addr = devm_ioport_map(&pdev->dev, ctl_res->start,
+ ap->ioaddr.ctl_addr = devm_ioport_map(dev, ctl_res->start,
ctl_res->end - ctl_res->start + 1);
}
if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
- dev_err(&pdev->dev, "failed to map IO/CTL base\n");
+ dev_err(dev, "failed to map IO/CTL base\n");
return -ENOMEM;
}
ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
- pp_info = pdev->dev.platform_data;
- pata_platform_setup_port(&ap->ioaddr, pp_info);
+ pata_platform_setup_port(&ap->ioaddr, ioport_shift);
ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport",
(unsigned long long)io_res->start,
/* activate */
return ata_host_activate(host, irq, irq ? ata_interrupt : NULL,
- pp_info ? pp_info->irq_flags : 0,
- &pata_platform_sht);
+ irq_flags, &pata_platform_sht);
}
+EXPORT_SYMBOL_GPL(__pata_platform_probe);
/**
- * pata_platform_remove - unplug a platform interface
- * @pdev: platform device
+ * __pata_platform_remove - unplug a platform interface
+ * @dev: device
*
* A platform bus ATA device has been unplugged. Perform the needed
* cleanup. Also called on module unload for any active devices.
*/
-static int __devexit pata_platform_remove(struct platform_device *pdev)
+int __devexit __pata_platform_remove(struct device *dev)
{
- struct device *dev = &pdev->dev;
struct ata_host *host = dev_get_drvdata(dev);
ata_host_detach(host);
return 0;
}
+EXPORT_SYMBOL_GPL(__pata_platform_remove);
+
+static int __devinit pata_platform_probe(struct platform_device *pdev)
+{
+ struct resource *io_res;
+ struct resource *ctl_res;
+ struct resource *irq_res;
+ struct pata_platform_info *pp_info = pdev->dev.platform_data;
+
+ /*
+ * Simple resource validation ..
+ */
+ if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) {
+ dev_err(&pdev->dev, "invalid number of resources\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Get the I/O base first
+ */
+ io_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (io_res == NULL) {
+ io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(io_res == NULL))
+ return -EINVAL;
+ }
+
+ /*
+ * Then the CTL base
+ */
+ ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1);
+ if (ctl_res == NULL) {
+ ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (unlikely(ctl_res == NULL))
+ return -EINVAL;
+ }
+
+ /*
+ * And the IRQ
+ */
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (irq_res)
+ irq_res->flags = pp_info ? pp_info->irq_flags : 0;
+
+ return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res,
+ pp_info ? pp_info->ioport_shift : 0,
+ pio_mask);
+}
+
+static int __devexit pata_platform_remove(struct platform_device *pdev)
+{
+ return __pata_platform_remove(&pdev->dev);
+}
static struct platform_driver pata_platform_driver = {
.probe = pata_platform_probe,
unsigned int irq_flags;
};
+extern int __devinit __pata_platform_probe(struct device *dev,
+ struct resource *io_res,
+ struct resource *ctl_res,
+ struct resource *irq_res,
+ unsigned int ioport_shift,
+ int __pio_mask);
+
+extern int __devexit __pata_platform_remove(struct device *dev);
+
#endif /* __LINUX_PATA_PLATFORM_H */
projects / linux-2.6 / commitdiff