ucc_geth: eliminate max-speed, change interface-type to phy-connection-type

It was agreed that phy-connection-type was a better name for
the interface-type property, so this patch renames it.

Also, the max-speed property name was determined too generic,
and is therefore eliminated in favour of phy-connection-type
derivation logic.

includes corrections to copyright text.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 0f667652fda9304ce04d479dfdbea05ba08270a8..c2ccbd098f538778ac0cb4e0b280a61974c9e3a0 100644 (file)
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ * Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved.
  *
  * Author: Shlomi Gridish <gridish@freescale.com>
  *        Li Yang <leoli@freescale.com>
@@ -3737,21 +3737,21 @@ static int ucc_geth_close(struct net_device *dev)
 
 const struct ethtool_ops ucc_geth_ethtool_ops = { };
 
-static phy_interface_t to_phy_interface(const char *interface_type)
+static phy_interface_t to_phy_interface(const char *phy_connection_type)
 {
-       if (strcasecmp(interface_type, "mii") == 0)
+       if (strcasecmp(phy_connection_type, "mii") == 0)
                return PHY_INTERFACE_MODE_MII;
-       if (strcasecmp(interface_type, "gmii") == 0)
+       if (strcasecmp(phy_connection_type, "gmii") == 0)
                return PHY_INTERFACE_MODE_GMII;
-       if (strcasecmp(interface_type, "tbi") == 0)
+       if (strcasecmp(phy_connection_type, "tbi") == 0)
                return PHY_INTERFACE_MODE_TBI;
-       if (strcasecmp(interface_type, "rmii") == 0)
+       if (strcasecmp(phy_connection_type, "rmii") == 0)
                return PHY_INTERFACE_MODE_RMII;
-       if (strcasecmp(interface_type, "rgmii") == 0)
+       if (strcasecmp(phy_connection_type, "rgmii") == 0)
                return PHY_INTERFACE_MODE_RGMII;
-       if (strcasecmp(interface_type, "rgmii-id") == 0)
+       if (strcasecmp(phy_connection_type, "rgmii-id") == 0)
                return PHY_INTERFACE_MODE_RGMII_ID;
-       if (strcasecmp(interface_type, "rtbi") == 0)
+       if (strcasecmp(phy_connection_type, "rtbi") == 0)
                return PHY_INTERFACE_MODE_RTBI;
 
        return PHY_INTERFACE_MODE_MII;
@@ -3819,29 +3819,21 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
        ug_info->phy_address = *prop;
 
        /* get the phy interface type, or default to MII */
-       prop = of_get_property(np, "interface-type", NULL);
+       prop = of_get_property(np, "phy-connection-type", NULL);
        if (!prop) {
                /* handle interface property present in old trees */
                prop = of_get_property(phy, "interface", NULL);
-               if (prop != NULL)
+               if (prop != NULL) {
                        phy_interface = enet_to_phy_interface[*prop];
-               else
+                       max_speed = enet_to_speed[*prop];
+               } else
                        phy_interface = PHY_INTERFACE_MODE_MII;
        } else {
                phy_interface = to_phy_interface((const char *)prop);
        }
 
-       /* get speed, or derive from interface */
-       prop = of_get_property(np, "max-speed", NULL);
-       if (!prop) {
-               /* handle interface property present in old trees */
-               prop = of_get_property(phy, "interface", NULL);
-               if (prop != NULL)
-                       max_speed = enet_to_speed[*prop];
-       } else {
-               max_speed = *prop;
-       }
-       if (!max_speed) {
+       /* get speed, or derive from PHY interface */
+       if (max_speed == 0)
                switch (phy_interface) {
                case PHY_INTERFACE_MODE_GMII:
                case PHY_INTERFACE_MODE_RGMII:
@@ -3854,9 +3846,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
                        max_speed = SPEED_100;
                        break;
                }
-       }
 
        if (max_speed == SPEED_1000) {
+               /* configure muram FIFOs for gigabit operation */
                ug_info->uf_info.urfs = UCC_GETH_URFS_GIGA_INIT;
                ug_info->uf_info.urfet = UCC_GETH_URFET_GIGA_INIT;
                ug_info->uf_info.urfset = UCC_GETH_URFSET_GIGA_INIT;

diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index 27a1ef3b7b0609c21b6d46164b286970f47412de..f96966d4bcc2b55a1eb3d239c209ec5a6ebd7d65 100644 (file)
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -1,12 +1,13 @@
 /*
  * drivers/net/ucc_geth_mii.c
  *
- * Gianfar Ethernet Driver -- MIIM bus implementation
- * Provides Bus interface for MIIM regs
+ * QE UCC Gigabit Ethernet Driver -- MII Management Bus Implementation
+ * Provides Bus interface for MII Management regs in the UCC register space
  *
- * Author: Li Yang
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
  *
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ * Authors: Li Yang <leoli@freescale.com>
+ *         Kim Phillips <kim.phillips@freescale.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the

diff --git a/drivers/net/ucc_geth_mii.h b/drivers/net/ucc_geth_mii.h
index 98430fe0bfc6f438cd60a70fb9709f0b6520778e..d8343703991916f24c29216d6a3a17ac29a3b3f7 100644 (file)
--- a/drivers/net/ucc_geth_mii.h
+++ b/drivers/net/ucc_geth_mii.h
@@ -1,13 +1,13 @@
 /*
  * drivers/net/ucc_geth_mii.h
  *
- * Gianfar Ethernet Driver -- MII Management Bus Implementation
- * Driver for the MDIO bus controller in the Gianfar register space
+ * QE UCC Gigabit Ethernet Driver -- MII Management Bus Implementation
+ * Provides Bus interface for MII Management regs in the UCC register space
  *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
  *
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ * Authors: Li Yang <leoli@freescale.com>
+ *         Kim Phillips <kim.phillips@freescale.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the