/* board_id = Subsystem Device ID & Vendor ID
* product = Marketing Name for the board
* access = Address of the struct of function pointers
- * nr_cmds = Number of commands supported by controller
*/
static struct board_type products[] = {
- {0x40700E11, "Smart Array 5300", &SA5_access, 512},
- {0x40800E11, "Smart Array 5i", &SA5B_access, 512},
- {0x40820E11, "Smart Array 532", &SA5B_access, 512},
- {0x40830E11, "Smart Array 5312", &SA5B_access, 512},
- {0x409A0E11, "Smart Array 641", &SA5_access, 512},
- {0x409B0E11, "Smart Array 642", &SA5_access, 512},
- {0x409C0E11, "Smart Array 6400", &SA5_access, 512},
- {0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512},
- {0x40910E11, "Smart Array 6i", &SA5_access, 512},
- {0x3225103C, "Smart Array P600", &SA5_access, 512},
- {0x3223103C, "Smart Array P800", &SA5_access, 512},
- {0x3234103C, "Smart Array P400", &SA5_access, 512},
- {0x3235103C, "Smart Array P400i", &SA5_access, 512},
- {0x3211103C, "Smart Array E200i", &SA5_access, 120},
- {0x3212103C, "Smart Array E200", &SA5_access, 120},
- {0x3213103C, "Smart Array E200i", &SA5_access, 120},
- {0x3214103C, "Smart Array E200i", &SA5_access, 120},
- {0x3215103C, "Smart Array E200i", &SA5_access, 120},
- {0x3237103C, "Smart Array E500", &SA5_access, 512},
- {0x323D103C, "Smart Array P700m", &SA5_access, 512},
- {0x3241103C, "Smart Array P212", &SA5_access, 384},
- {0x3243103C, "Smart Array P410", &SA5_access, 384},
- {0x3245103C, "Smart Array P410i", &SA5_access, 384},
- {0x3247103C, "Smart Array P411", &SA5_access, 384},
- {0x3249103C, "Smart Array P812", &SA5_access, 384},
- {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120},
+ {0x40700E11, "Smart Array 5300", &SA5_access},
+ {0x40800E11, "Smart Array 5i", &SA5B_access},
+ {0x40820E11, "Smart Array 532", &SA5B_access},
+ {0x40830E11, "Smart Array 5312", &SA5B_access},
+ {0x409A0E11, "Smart Array 641", &SA5_access},
+ {0x409B0E11, "Smart Array 642", &SA5_access},
+ {0x409C0E11, "Smart Array 6400", &SA5_access},
+ {0x409D0E11, "Smart Array 6400 EM", &SA5_access},
+ {0x40910E11, "Smart Array 6i", &SA5_access},
+ {0x3225103C, "Smart Array P600", &SA5_access},
+ {0x3223103C, "Smart Array P800", &SA5_access},
+ {0x3234103C, "Smart Array P400", &SA5_access},
+ {0x3235103C, "Smart Array P400i", &SA5_access},
+ {0x3211103C, "Smart Array E200i", &SA5_access},
+ {0x3212103C, "Smart Array E200", &SA5_access},
+ {0x3213103C, "Smart Array E200i", &SA5_access},
+ {0x3214103C, "Smart Array E200i", &SA5_access},
+ {0x3215103C, "Smart Array E200i", &SA5_access},
+ {0x3237103C, "Smart Array E500", &SA5_access},
+ {0x323D103C, "Smart Array P700m", &SA5_access},
+ {0x3241103C, "Smart Array P212", &SA5_access},
+ {0x3243103C, "Smart Array P410", &SA5_access},
+ {0x3245103C, "Smart Array P410i", &SA5_access},
+ {0x3247103C, "Smart Array P411", &SA5_access},
+ {0x3249103C, "Smart Array P812", &SA5_access},
+ {0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
print_cfg_table(c->cfgtable);
#endif /* CCISS_DEBUG */
+ /* Some controllers support Zero Memory Raid (ZMR).
+ * When configured in ZMR mode the number of supported
+ * commands drops to 64. So instead of just setting an
+ * arbitrary value we make the driver a little smarter.
+ * We read the config table to tell us how many commands
+ * are supported on the controller then subtract 4 to
+ * leave a little room for ioctl calls.
+ */
+ c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
for (i = 0; i < ARRAY_SIZE(products); i++) {
if (board_id == products[i].board_id) {
c->product_name = products[i].product_name;
c->access = *(products[i].access);
- c->nr_cmds = products[i].nr_cmds;
+ c->nr_cmds = c->max_commands - 4;
break;
}
}
if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
c->product_name = products[i-1].product_name;
c->access = *(products[i-1].access);
- c->nr_cmds = products[i-1].nr_cmds;
+ c->nr_cmds = c->max_commands - 4;
printk(KERN_WARNING "cciss: This is an unknown "
"Smart Array controller.\n"
"cciss: Please update to the latest driver "