k8temp: Documentation update

Update the documentation for the k8temp driver.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/Documentation/hwmon/k8temp b/Documentation/hwmon/k8temp
index bab445ab0f523fc627c24aa0c5da11aa11d51523..30d123b8d92022180b4f0cd2ae32cffc47ba4f6e 100644 (file)
--- a/Documentation/hwmon/k8temp
+++ b/Documentation/hwmon/k8temp
@@ -2,7 +2,7 @@ Kernel driver k8temp
 ====================
 
 Supported chips:
-  * AMD K8 CPU
+  * AMD Athlon64/FX or Opteron CPUs
     Prefix: 'k8temp'
     Addresses scanned: PCI space
     Datasheet: http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
@@ -13,10 +13,13 @@ Contact: Rudolf Marek <r.marek@sh.cvut.cz>
 Description
 -----------
 
-This driver permits reading temperature sensor(s) embedded inside AMD K8 CPUs.
-Official documentation says that it works from revision F of K8 core, but
-in fact it seems to be implemented for all revisions of K8 except the first
-two revisions (SH-B0 and SH-B3).
+This driver permits reading temperature sensor(s) embedded inside AMD K8
+family CPUs (Athlon64/FX, Opteron). Official documentation says that it works
+from revision F of K8 core, but in fact it seems to be implemented for all
+revisions of K8 except the first two revisions (SH-B0 and SH-B3).
+
+Please note that you will need at least lm-sensors 2.10.1 for proper userspace
+support.
 
 There can be up to four temperature sensors inside single CPU. The driver
 will auto-detect the sensors and will display only temperatures from

diff --git a/MAINTAINERS b/MAINTAINERS
index 5305dd69095b3b5e7605c6dd3539168d43cc4e77..595b34c4f9d8462c91844519fde3fcd40be4d9fa 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1668,6 +1668,12 @@ M:       sct@redhat.com, akpm@osdl.org
 L:     ext2-devel@lists.sourceforge.net
 S:     Maintained
 
+K8TEMP HARDWARE MONITORING DRIVER
+P:     Rudolf Marek
+M:     r.marek@assembler.cz
+L:     lm-sensors@lm-sensors.org
+S:     Maintained
+
 KCONFIG
 P:     Roman Zippel
 M:     zippel@linux-m68k.org

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e0dede7198c88e9c7f96d285e2735e1d4401bf57..e76d91906c99a3ab671dbb9e0736e3e197901efc 100644 (file)
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -95,11 +95,13 @@ config SENSORS_ADM9240
          will be called adm9240.
 
 config SENSORS_K8TEMP
-       tristate "AMD K8 processor sensor"
+       tristate "AMD Athlon64/FX or Opteron temperature sensor"
        depends on HWMON && X86 && PCI && EXPERIMENTAL
        help
          If you say yes here you get support for the temperature
-         sensor(s) inside your AMD K8 CPU.
+         sensor(s) inside your CPU. Supported is whole AMD K8
+         microarchitecture. Please note that you will need at least
+         lm-sensors 2.10.1 for proper userspace support.
 
          This driver can also be built as a module.  If so, the module
          will be called k8temp.