[ALSA] cmipci: fix handling of FM/MIDI port addresses

Make sure that the MPU-401 MIDI and OPL-3 FM devices are used only on
those chips where they are supported, and that the correct port
addresses are used.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 3df33ea8bae6448fa35a2948b0129b8de30430e0..85b40057716d4a3f735e1b20200ed65e29922436 100644 (file)
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -365,13 +365,15 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-cmipci
   -----------------
 
-    Module for C-Media CMI8338 and 8738 PCI sound cards.
+    Module for C-Media CMI8338/8738/8768/8770 PCI sound cards.
 
-    mpu_port   - 0x300,0x310,0x320,0x330 = legacy port,
-                 1 = integrated PCI port,
+    mpu_port    - port address of MIDI interface:
+                 0x300,0x310,0x320,0x330 = legacy port,
+                 1 = integrated PCI port (8738 or later),
                  0 = disable (default)
-    fm_port     - 0x388 = legacy port,
-                 1 = integrated PCI port (default),
+    fm_port     - port address of OPL-3 FM synthesizer (8x38 only):
+                 0x388 = legacy port,
+                 1 = integrated PCI port (default on 8738),
                  0 = disable
     soft_ac3    - Software-conversion of raw SPDIF packets (model 033 only)
                   (default = 1)

diff --git a/Documentation/sound/alsa/CMIPCI.txt b/Documentation/sound/alsa/CMIPCI.txt
index 4b2b1538705634797a5893c61ca7eda527f256a3..664be46566b89db72084eb70c5f79ac8077db8b6 100644 (file)
--- a/Documentation/sound/alsa/CMIPCI.txt
+++ b/Documentation/sound/alsa/CMIPCI.txt
@@ -1,5 +1,5 @@
-              Brief Notes on C-Media 8738/8338 Driver
-              =======================================
+         Brief Notes on C-Media 8338/8738/8768/8770 Driver
+         =================================================
 
                    Takashi Iwai <tiwai@suse.de>
 
@@ -212,7 +212,9 @@ MIDI CONTROLLER
 The MPU401-UART interface is disabled as default.  You need to set
 module option "mpu_port" with a valid I/O port address to enable the
 MIDI support.  The valid I/O ports are 0x300, 0x310, 0x320 and 0x330.
-Choose the value which doesn't conflict with other cards.
+Choose the value which doesn't conflict with other cards.  With
+CMI8738 and newer chips, you can use "mpu_port=1" to use a PCI port
+address that does not conflict with any other card.
 
 There is _no_ hardware wavetable function on this chip (except for
 OPL3 synth below).
@@ -230,6 +232,8 @@ Set "fm_port" module option for more cards.
 The output quality of FM OPL/3 is, however, very weird.
 I don't know why..
 
+CMI8768 and newer chips do not have the FM synth.
+
 
 Joystick and Modem
 ------------------

diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 9554140f0b04db70349182a8f08b976eb58d81d4..5d0732c09f2e395267b7bbcaace0f22585b151cf 100644 (file)
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -170,14 +170,14 @@ config SND_CA0106
          will be called snd-ca0106.
 
 config SND_CMIPCI
-       tristate "C-Media 8738, 8338"
+       tristate "C-Media 8338, 8738, 8768, 8770"
        depends on SND
        select SND_OPL3_LIB
        select SND_MPU401_UART
        select SND_PCM
        help
-         If you want to use soundcards based on C-Media CMI8338 or CMI8738
-         chips, say Y here and read
+         If you want to use soundcards based on C-Media CMI8338, CMI8738,
+         CMI8768 or CMI8770 chips, say Y here and read
          <file:Documentation/sound/alsa/CMIPCI.txt>.
 
          To compile this driver as a module, choose M here: the module

diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index c42c51647df7963daa752e4a997c00e7926f2882..9d394c7c221d697ff928cb7dff61dc62cd5d397a 100644 (file)
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -2774,10 +2774,14 @@ static int __devinit snd_cmipci_create_fm(struct cmipci *cm, long fm_port)
        if (!fm_port)
                goto disable_fm;
 
-       /* first try FM regs in PCI port range */
-       iosynth = cm->iobase + CM_REG_FM_PCI;
-       err = snd_opl3_create(cm->card, iosynth, iosynth + 2,
-                             OPL3_HW_OPL3, 1, &opl3);
+       if (cm->chip_version > 33) {
+               /* first try FM regs in PCI port range */
+               iosynth = cm->iobase + CM_REG_FM_PCI;
+               err = snd_opl3_create(cm->card, iosynth, iosynth + 2,
+                                     OPL3_HW_OPL3, 1, &opl3);
+       } else {
+               err = -EIO;
+       }
        if (err < 0) {
                /* then try legacy ports */
                val = snd_cmipci_read(cm, CM_REG_LEGACY_CTRL) & ~CM_FMSEL_MASK;
@@ -2935,7 +2939,8 @@ static int __devinit snd_cmipci_create(struct snd_card *card, struct pci_dev *pc
                return err;
        }
 
-       integrated_midi = snd_cmipci_read_b(cm, CM_REG_MPU_PCI) != 0xff;
+       integrated_midi = cm->chip_version > 33 &&
+               snd_cmipci_read_b(cm, CM_REG_MPU_PCI + 1) != 0xff;
        if (integrated_midi && mpu_port[dev] == 1)
                iomidi = cm->iobase + CM_REG_MPU_PCI;
        else {
@@ -2955,8 +2960,11 @@ static int __devinit snd_cmipci_create(struct snd_card *card, struct pci_dev *pc
                }
        }
 
-       if ((err = snd_cmipci_create_fm(cm, fm_port[dev])) < 0)
-               return err;
+       if (cm->chip_version < 68) {
+               err = snd_cmipci_create_fm(cm, fm_port[dev]);
+               if (err < 0)
+                       return err;
+       }
 
        /* reset mixer */
        snd_cmipci_mixer_write(cm, 0, 0);