e100: Fix Tyan motherboard e100 not receiving IPMI commands

The 82550 & 51 parts have an extended configuration block that
includes a bit "GMRC", required to enable the expected TCO behavior,
in config byte offset 22d.  The config block sent by the failing driver
does include the extension area, but this bit is not initialised,
and the downlaod only specifies 0x16 bytes to be sent to the NIC
(thaht's bytes 00..21d). By initializing the GMRC bit, and extending
the download size for D102+ MACs, the problem is resolved.

Signed-off-by: David Graham <david.graham@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 763810c7f33aa1e3bb682e1afdc780ac18ca8ce1..74ea6373c7cdbee27249807cce247a6085cd172c 100644 (file)
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -159,7 +159,7 @@
 
 #define DRV_NAME               "e100"
 #define DRV_EXT                        "-NAPI"
-#define DRV_VERSION            "3.5.17-k4"DRV_EXT
+#define DRV_VERSION            "3.5.23-k4"DRV_EXT
 #define DRV_DESCRIPTION                "Intel(R) PRO/100 Network Driver"
 #define DRV_COPYRIGHT          "Copyright(c) 1999-2006 Intel Corporation"
 #define PFX                    DRV_NAME ": "
@@ -1024,10 +1024,16 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
                config->mwi_enable = 0x1;       /* 1=enable, 0=disable */
                config->standard_tcb = 0x0;     /* 1=standard, 0=extended */
                config->rx_long_ok = 0x1;       /* 1=VLANs ok, 0=standard */
-               if(nic->mac >= mac_82559_D101M)
+               if (nic->mac >= mac_82559_D101M) {
                        config->tno_intr = 0x1;         /* TCO stats enable */
-               else
+                       /* Enable TCO in extended config */
+                       if (nic->mac >= mac_82551_10) {
+                               config->byte_count = 0x20; /* extended bytes */
+                               config->rx_d102_mode = 0x1; /* GMRC for TCO */
+                       }
+               } else {
                        config->standard_stat_counter = 0x0;
+               }
        }
 
        DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",